RESUMO
Particulate matter (PM) pollution is one of the major threats to cultural heritage outdoors. It has been recently implied that organic aerosols will prevail over inorganic carbon particulates in the future, changing the main mechanisms of damage caused by poor air quality to calcareous heritage in particular. We studied fresh particulate deposits on marble and limestone surfaces exposed to urban air in sheltered and unsheltered configurations. Due to different air pollution sources in different seasons, the amount and composition of surface deposits varied throughout the year. The main and most constant contributor to PM2.5 (particles smaller than 2.5 µm) were primary traffic emissions (30 %), followed by secondary formation of acidic inorganic aerosols, such as sulphate in summer and nitrate in winter (33 % altogether), and seasonal biomass-burning emissions (14 %). Although biomass burning is the major source of primary organic aerosols including the light-absorbing fraction that prevailed over black carbon (BC) in colder months (up to 60 % carbonaceous aerosol mass), we show that surface darkening causing the soiling effect is still governed by the minor BC fraction of atmospheric aerosols, which remained below 20 % of the carbonaceous aerosol mass throughout the year. This, however, can change in remote environments affected by biomass-burning emissions, such as winter resorts, or by rigorous BC mitigation measures in the future. In the short run, sheltered positions were less affected by different removal processes, but we show that surface deposits are not simply additive when considering longer periods of time. This must be taken into account when extrapolating surface accumulation to longer time scales.
Assuntos
Poluentes Atmosféricos , Material Particulado , Material Particulado/análise , Poluentes Atmosféricos/análise , Monitoramento Ambiental , Aerossóis/análise , Fuligem/análise , Poeira/análise , Estações do Ano , Carbono/análise , Carvão MineralRESUMO
In contrast to the extensive molecular and crystal structure investigations on oxalic acid dihydrate (C2H2O4·2H2O, α-POX) and its deuterated analogues (α-DOX), stands the absence of a complete vibrational spectra analysis. Such analysis is desirable in view of the proton dynamics in α-POX crystals. In this communication we report the room temperature polarized IR reflectance spectra of a single crystal of α-POX recorded from the ac crystal plane, and from the plane containing the b-crystallographic axis, with polarization along the axis. Dispersion analysis of the reflectance spectra of both Bu and Au symmetry type modes, using model dielectric and reflectance function valid for the monoclinic case, have been performed and the results are discussed. Some aspects of the obtained fit results for some of the spectral regions and the peculiar change of the reflectance function with polarization angle are also discussed in this work. A correlation between the crystal structure and measured spectra, together with the results of the performed dispersion analysis, gave answers to some of the problems concerned with the orientation of the transition dipole moments of the IR active modes. The assignment of modes is assisted by DFT calculations. Another aspect covered in this work is the model reflectance functions using different averaging theories that have been applied in obtaining the reflectance spectrum of a polycrystalline sample. The results of the comparison between these spectra and the recorded reflectance spectra from a polycrystalline sample were further discussed.
RESUMO
Reversible colour change of leuco dye-based composites is in general closely related to their phase change, thus the two phenomena should occur at around the same temperature and should be influenced similarly. However, spatial confinement of the analysed sample affects the change in colour differently compared to its phase transition and the most pronounced effects can be observed during cooling. The bulk composite is coloured while still liquid and the colour hysteresis does not exhibit a loop. In an open-porous medium the colouration coincides well with the crystallization and the colour hysteresis widens to about 4 °C. Microencapsulated composite exhibits two crystallization processes, one of them taking place at the bulk crystallization temperature and the other one at about 20 °C lower. Under such conditions the composite is coloured just before the onset of the second crystallization, i.e. about 15 °C below crystallization in the bulk, and the corresponding colour hysteresis widens to 18 °C. The two crystallization forms are thermally independent and have the same crystalline structure. These effects should be taken into account when designing future applications where the phase-changing materials are implemented.
RESUMO
Optical security takes advantage of complex gonioapparent effects of diffractive samples having strong angular and spectral dependence of reflected light. However, resolving the full angular and spectral properties of these kinds of targets might be a tremendous task. Preferably, one would like to measure a more limited number of illumination-viewing directions, using a multiangle goniometer, and still reveal the complex and unique properties of the target. In this study, we use a method for converting the full angular reflection data into reduced goniospectrometric space and further on into an xDNA graph, which we find to show good potential as a fingerprint for gonioapparent surfaces when limited measurement geometries are available. For the evaluation of the xDNA graph, we use two goniometric devices with a 45° incident angle illumination, a high-resolution bidirectional spectrometer, and a portable multiangle goniometer. This study tests the xDNA graph by evaluating the effects of geometry count and spectral resolution in goniometric measurements and further finds that the xDNA graph indeed works best with a reduced count of geometries and is not sensitive to lowered spectral resolution.
RESUMO
Advanced application of eye-catching effects occurring in coatings with special effect pigments requires controlling their appearance. For this purpose, angular dependent reflectance must be analyzed in terms of the used flakes and their distribution inside the coating; it is important to know the size of the surface area they cover, and the position and precision of their orientation. These properties were varied using our numerical model, which gave an angular dependent reflectance factor for each set of coating parameters. The method was applied to analyze how well the calculated goniometric reflectance factor could characterize the appearance of effect coatings. For this purpose, the spectra were transformed in the goniospectrometric space, and the obtained curve was analyzed. While its shape, position, and orientation in the space reveal the optical makeup of the coating, the goniospectrometric space curve could serve as an appearance fingerprint of the corresponding sample. The applicability of the theoretical predictions was confirmed using a coating with metallic flakes and one with mica-based Fe2O3 coated flakes.
RESUMO
Many applications use gonioapparent targets whose appearance depends on irradiation and viewing angles; the strongest effects are provided by light diffraction. These targets, optically variable devices (OVDs), are used in both security and authentication applications. This study introduces a bidirectional spectrometer, which enables to analyze samples with most complex angular and spectral properties. In our work, the spectrometer is evaluated with samples having very different types of reflection, concerning spectral and angular distributions. Furthermore, an OVD containing several different grating patches is evaluated. The device uses automatically adjusting exposure time to provide maximum signal dynamics and is capable of doing steps as small as 0.01°. However, even 2° steps for the detector movement showed that this device is more than capable of characterizing even the most complex reflecting surfaces. This study presents sRGB visualizations, discussion of bidirectional reflection, and accurate grating period calculations for all of the grating samples used.
RESUMO
The human reception of light includes image-forming and non-image-forming effects which are triggered by spectral distribution and intensity of light. Ideal lighting is similar to daylight, which could be evaluated by spectral or chromaticity match. LED-based and CFL-based lighting were analyzed here, proposed according to spectral and chromaticity match, respectively. The photobiological effects were expressed by effectiveness for blue light hazard, cirtopic activity, and photopic vision. Good spectral match provides light with more similar effects to those obtained by the chromaticity match. The new parameters are useful for better evaluation of complex human responses caused by lighting.
Assuntos
Percepção de Cores/fisiologia , Colorimetria/métodos , Traumatismos Oculares/prevenção & controle , Traumatismos Oculares/fisiopatologia , Iluminação/instrumentação , Modelos Biológicos , Fotobiologia/métodos , Simulação por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Humanos , Luz , Doses de RadiaçãoRESUMO
Goniospectrophotometric space curves were obtained by summation of spatially under-sampled bidirectional reflectance distribution function over all directions and repeating this for all wavelengths in the visible spectral region. This gives a 3D goniospectrophotometric curve called an xDNA graph. Systematic analysis applying 19 measurement geometries confirms existence of characteristic shapes of the graph for all optically similar samples. This enables distinguishing between differently rough samples, an interference effect on various transparent layers, and selective spectral absorption of light in differently thick pigmented coatings. Therefore, the considered goniospectrophotometric space curves could serve as an appearance fingerprint of such samples.
RESUMO
The bidirectional reflectance distribution functions of diffraction gratings were calculated by applying diffraction theory and transformed into goniospectrophotometric space curves. Gratings with parallel sinusoidal grooves having periods of 1-3.5 µm and amplitudes below 0.2 µm were analyzed. The obtained goniospectrophotometric space curves consist of lines with different slopes and possible interconnections. The slope of the lines is directly connected to the grating period and the length to the period and the amplitude. Such curves could be regarded as a simple appearance fingerprint of a diffraction grating. The ability of portable multiangle spectrophotometers to provide them for diffraction gratings is analyzed.
RESUMO
We report on the first exfoliation of MoS2 coaxial nanotubes. The single-layer flakes, as the result of exfoliation, represent the transition metal dichalcogenides' analogue of graphene. They show a very low degree of restacking in comparison with exfoliation of MoS2 plate-like crystals. MoS2 monolayers were investigated by means of electron and atomic force microscopies, showing their structure, and ultraviolet-visible spectrometry, revealing quantum confinement as the consequence of the nanoscale size in the z-direction.
RESUMO
The present study investigates the preparation of the copper phthalocyanine pigment for inkjet printing inks. The pigment particle size distribution was measured with laser diffraction at different times of wet milling. Simultaneously, the absorbance spectra in a visible-near infrared spectral region of the corresponding diluted pigment dispersions were measured. At the beginning of the milling process, the particle size distribution is bimodal, showing the presence of aggregates and agglomerates. During the second hour of milling, the particle size distribution changes to unimodal due to the breaking of agglomerates, and the corresponding absorbance spectra change accordingly. Further milling diminishes the size of pigment aggregates up to the steady state value of around 130 nm, where also the absorbance in the corresponding spectra does not increase. A detailed analysis of intensity and position of the absorbance peak at 340 nm in dependence on the milling time and pigment concentration confirms the idea that an optical spectroscopy could be used for the assessment of optimal milling time required for the preparation of pigments with the maximum absorption ability.
RESUMO
Switchable windows are being installed into modern buildings. We report on how the variable transmittance of gasochromic and electrochromic switchable windows changes the color rendering properties of the daylight passing through these windows. We present a series of color rendering examples. Correlated color temperature and color rendering indices are insufficient to describe the color properties of this filtered light, as these indices are beyond the applicability limits. We obtain more reliable results using the color shifts (deltaE) of different objects. We find that as the transmittance of the window changes, each surface color moves along a path of the CIELAB space in the same direction for both switchable units. The direction and distance moved differs among test-color samples. The appearance of an array of colored objects is strongly distorted at higher coloration states of the windows.
RESUMO
The results of studies of infrared reflection-absorption spectra of metal-effect coatings are presented in this paper. Such coatings consist of metallic flakes that are dispersed in a polymer binder. The spectra show two distinct phenomena. One is due to the polymer matrix. The other is due to metallic flakes that are dispersed inside the layer. The polymer binder causes narrow spectral lines that give a thickness-dependent intensity and position. Metallic flakes change the average baseline of this spectrum over the entire infrared spectral region. This particular effect was evaluated using a simple rough-surface model. Two parameters of the model, the root-mean-square roughness and the correlation length of the rough surface, described the reflection of the partial beams on the metal flake surfaces and scattering on flakes boundaries. The other two parameters are the specular reflectance and the diffuse reflectance of the plane untextured interface between the polymer matrix and the metal flake surface. Various metal-effect coatings within the same polymer binder were analyzed. The effect of each metal flake dispersion was evaluated by the parameters within the rough-surface model. The results were analyzed in terms of the size and the loadings of flakes that were used in the coatings.