p-Hexafluoroisopropanol phenyl functionalized graphene for QCM based detection of dimethyl methylphosphonate, a simulant of the nerve agent sarin.

The detection of DMMP (dimethyl methylphosphonate, a simulant of nerve agent sarin) was performed by using p-hexafluoroisopropanol phenyl (HFIPP) functionalized graphene (GR) via hydrogen bond interactions. For this, the HFIPP moiety was covalently functionalized on the surface of GR by a diazo reaction. The HFIPP-GR film-modified QCM electrodes were fabricated and their sensing characteristics towards DMMP were investigated. The proposed sensor showed good response towards sensing DMMP vapor at room temperature. In order to see the effect of HFIPP derivatives on DMMP vapor sensing, a comparative study was also conducted with unfunctionalized graphene. The sensitivity and detection limit of the HFIPP-GR sensor against DMMP vapors were 12.24 Hz ppm-1 and 150 ppb respectively. The HFIPP-GR coated sensors showed good selectivity towards sensing DMMP vapors when compared with common organic vapors.

Catalytic removal of carbon monoxide over carbon supported palladium catalyst.

Carbon supported palladium (Pd/C) catalyst was prepared by impregnation of palladium chloride using incipient wetness technique, which was followed by liquid phase reduction with formaldehyde. Thereafter, Pd/C catalyst was characterized using X-ray diffractometery, scanning electron microscopy, atomic absorption spectroscopy, thermo gravimetry, differential scanning calorimetry and surface characterization techniques. Catalytic removal of carbon monoxide (CO) over Pd/C catalyst was studied under dynamic conditions. Pd/C catalyst was found to be continuously converting CO to CO(2) through the catalyzed reaction, i.e., CO+1/2O(2)→CO(2). Pd/C catalyst provided excellent protection against CO. Effects of palladium wt%, CO concentration, humidity, space velocity and reaction environment were also studied on the breakthrough behavior of CO.

Thermal decomposition studies of riot control agent ω-chloroacetophenone (CN) by pyrolysis-gas chromatography-mass spectrometry.

Pyrolysis-GC/MS system with on-line micro-furnace was used to make rapid evaluation of ω-chloroacetophenone (CN) decomposition under inert thermal atmospheres. The volatile products evolved during pyrolysis were analyzed by thermal gravimetric analysis (TGA) and Py-GC/MS to obtain specific thermogram and pyrogram. Thermal gravimetric analysis results showed that CN undergoes sublimation at 167°C prior to its decomposition at 229°C. Totally 45 degradation products were identified based on mass spectral library matching with the aid of correlation of the values of boiling point (bp) and retention time. A large number of mono-aromatics and polycyclic aromatic hydrocarbons were observed beyond 600°C. In addition to the aromatic hydrocarbons, oxygenated compounds were also observed during the pyrolysis process. The pyrolysis mechanism was proposed based on the determined pyrolysates and their relative abundance with temperature. The investigation results can provide significant information for understanding the thermal behavior of CN and evaluation of the potential influence of the pyrolysates to living being and the environment.

Modified titania nanotubes for decontamination of sulphur mustard.

Modified titania nanotubes have been studied as powder decontaminants against sulphur mustard (HD), a deadliest chemical warfare agent. Decontamination reactions were carried out at room temperature (30+/-2 degrees C) and monitored by gas chromatography and gas chromatography mass spectrometry techniques. Reactions displayed first order kinetics. HD underwent accelerated hydrolysis on Ag(+)-titania nanotubes when compared to Cu(2+), Ni(2+), Co(2+), Mn(2+) and Ru(3+)-titania nanotubes depicting catalysis. Thiodiglycol, 1,4-oxathiane were observed to be major products formed except on Ru(3+)-titania nanotubes. Sulphur mustard sulphoxide formed on Ru(3+)-titania nanotubes indicating oxidative decontamination of HD.

Synthesis and characterization of metal ion imprinted nano-porous polymer for the selective recognition of copper.

Selective recognition of metal ions utilizing metal ion-imprinted polymers (MIIPs) received much importance in diverse fields owing to their high selectivity for the target metal ions. In the present study, a copper ion imprinted polymer was synthesized without an additional complexing ligand or complex with a broad aim to avoid the conventional extra metal ion complexing ligand during the synthesis of MIIP. The complete removal of the copper metal ion from the MIIP was confirmed by AAS and SEM-EDX. SEM image of the MIIP exhibited nano-patterns and it was also found to be entirely different from that of non-imprinted polymer and polymer with copper metal ions. BET surface area analysis revealed more surface area (47.96 m(2)/g) for the Cu(II)-MIIP than non-imprinted control polymer (41.43 m(2)/g). TGA result of polymer with copper metal ion indicated more char yield (18.41%) when compared to non-imprinted control polymer (8.3%) and Cu(II)-MIIP (less than 1%). FTIR study confirmed the complexation between Cu(II)-MIIP and Cu(II) metal ion through carbonyl oxygen of acryl amide. The Cu(II)-MIIP exhibited an imprinting efficiency of 2.0 and it was showing 8% interference from a mixture of Zn, Ni and Co ions. A potentiometric ion selective electrode devised with Cu(II)-MIIP showed more potential response for Cu(II) ion than that was fabricated from non-imprinted polymer.