RESUMO
Conductive inkjet printing with metal nanoparticles is irreversible because the particles are sintered into a continuous metal film. The resulting structures are difficult to remove or repair and prone to cracking. Here, a hybrid ink is used to obviate the sintering step and print interconnected particle networks that become highly conductive immediately after drying. It is shown that reversible conductive printing is possible on low-cost cardboard samples after applying standard paper industry coats that are adapted in terms of surface energy and porosity. The conductivity of the printed films approaches that of sintered standard inks on the same substrate, but the mobility of the hybrid particle film makes them less sensitive to cracks during bending and folding of the substrate. Damages that occur can be partially repaired by wetting the film such that particle mobility is increased and particles move to bridge insulating gaps in the film. It is demonstrated that the conductive material can be recovered from the cardboard at the end of its life time and be redispersed to recycle the particles and reuse them in conductive inks.
RESUMO
Downsizing well-established materials to the nanoscale is a key route to novel functionalities, in particular if different functionalities are merged in hybrid nanomaterials. Hybrid carbon-based hierarchical nanostructures are particularly promising for electrochemical energy storage since they combine benefits of nanosize effects, enhanced electrical conductivity and integrity of bulk materials. We show that endohedral multiwalled carbon nanotubes (CNT) encapsulating high-capacity (here: conversion and alloying) electrode materials have a high potential for use in anode materials for lithium-ion batteries (LIB). There are two essential characteristics of filled CNT relevant for application in electrochemical energy storage: (1) rigid hollow cavities of the CNT provide upper limits for nanoparticles in their inner cavities which are both separated from the fillings of other CNT and protected against degradation. In particular, the CNT shells resist strong volume changes of encapsulates in response to electrochemical cycling, which in conventional conversion and alloying materials hinders application in energy storage devices. (2) Carbon mantles ensure electrical contact to the active material as they are unaffected by potential cracks of the encapsulate and form a stable conductive network in the electrode compound. Our studies confirm that encapsulates are electrochemically active and can achieve full theoretical reversible capacity. The results imply that encapsulating nanostructures inside CNT can provide a route to new high-performance nanocomposite anode materials for LIB.
Assuntos
Técnicas Eletroquímicas/métodos , Íons/química , Lítio/química , Nanotubos de Carbono/química , Cobalto/química , Condutividade Elétrica , Fontes de Energia Elétrica , Eletrodos , Compostos Férricos/química , Compostos de Manganês/química , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Nanocompostos/química , Nanocompostos/ultraestrutura , Nanotubos de Carbono/ultraestrutura , Óxidos/química , Estanho/químicaRESUMO
The ferrimagnetic and high-capacity electrode material Mn3O4 is encapsulated inside multi-walled carbon nanotubes (CNT). We show that the rigid hollow cavities of the CNT enforce size-controlled nanoparticles which are electrochemically active inside the CNT. The ferrimagnetic Mn3O4 filling is switched by electrochemical conversion reaction to antiferromagnetic MnO. The conversion reaction is further exploited for electrochemical energy storage. Our studies confirm that the theoretical reversible capacity of the Mn3O4 filling is fully accessible. Upon reversible cycling, the Mn3O4@CNT nanocomposite reaches a maximum discharge capacity of 461 mA h g-1 at 100 mA g-1 with a capacity retention of 90% after 50 cycles. We attribute the good cycling stability to the hybrid nature of the nanocomposite: (1) Carbon encasements ensure electrical contact to the active material by forming a stable conductive network which is unaffected by potential cracks of the encapsulate. (2) The CNT shells resist strong volume changes of the encapsulate in response to electrochemical cycling, which in conventional (i.e., non-nanocomposite) Mn3O4 hinders the application in energy storage devices. Our results demonstrate that Mn3O4 nanostructures can be successfully grown inside CNT and the resulting nanocomposite can be reversibly converted and exploited for lithium-ion batteries.
RESUMO
Reaction of antimony, selenium, and selenium(IV) chloride in the Lewis acidic ionic liquid [BMIM]Cl/AlCl(3) (BMIM: 1-n-butyl-3-methylimidazolium) at room temperature yielded air-sensitive black block-shaped crystals of [Sb(10)Se(10)][AlCl(4)](2). The triclinic unit cell (space group P1, a=947.85(2), b=957.79(2), c=1166.31(3)â pm; α=103.622(1), ß=110.318(1), γ=99.868(1)°; Z=1) contains the first mixed antimony/selenium polycation, [Sb(10)Se(10)](2+). The centrosymmetric polycyclic cation consists of two realgar-like [Sb(4)Se(4)] cages, which are connected through positively charged, three-bonded selenium atoms with a central [Sb(2)Se(2)] ring. Quantum chemical calculations predict semiconducting behavior of the compound and indicate primarily covalent bonding with varying ionic contribution within the [Sb(10)Se(10)](2+) polycation, while the interactions between the polycation and the [AlCl(4)](-) anions are predominantly ionic. The applicability of the Zintl concept to the chemical bonding in the heteronuclear polycation was evaluated by a thorough quantum chemical analysis.