Amphiphilic cyclodextrin nanoparticles.

Cyclodextrins are cyclic oligosaccharides obtained by enzymatic digestion of starch. The α-, ß- and γ- cyclodextrins contain respectively 6, 7 and 8 glucopyranose units, with primary and secondary hydroxyl groups located on the narrow and wider rims of a truncated cone shape structure. Such structure is that of a hydrophobic inner cavity with a hydrophilic outer surface allowing to interact with a wide range of molecules like ions, protein and oligonucleotides to form inclusion complexes. Many cyclodextrin applications in the pharmaceutical area have been widely described in the literature due to their low toxicity and low immunogenicity. The most important is to increase the solubility of hydrophobic drugs in water. Chemically modified cyclodextrin derivatives have been synthesized to enhance their properties and more specifically their pharmacological activity. Among these, amphiphilic derivatives were designed to build organized molecular structures, through selfassembling systems or by incorporation in lipid membranes, expected to improve the vectorization in the organism of the drug-containing cyclodextrin cavities. These derivatives can form a variety of supramolecular structures such as micelles, vesicles and nanoparticles. The purpose of this review is to summarize applications of amphiphilic cyclodextrins in different areas of drug delivery, particularly in protein and peptide drug delivery and gene delivery. The article highlights important amphiphilic cyclodextrin applications in the design of novel delivery systems like nanoparticles.

Long-circulating PEG-PE micelles co-loaded with paclitaxel and elacridar (GG918) overcome multidrug resistance.

Overexpression of drug efflux pump P-gp is one of the major reasons to cause multidrug resistance (MDR). To overcome P-gp mediated MDR, modulators, so called P-gp inhibitors, can be used to block efflux pump activity. Elacridar is one of the most potent P-gp inhibitors, which can cause irreversible and total P-gp blockage. Elacridar, among with other P-gp inhibitors, can be used in combination with anticancer drugs to enhance the effectiveness of chemotherapy against resistant tumor cells. On the other hand, P-gp is presented in normal tissues, thus non-selective blockage of P-gp can cause undesired side effects. Therefore, it is important to deliver P-gp inhibitor only to the tumor cells (along with anticancer drug) and limit its distribution in the body. In this study, we have developed PEG-PE-based long-circulating ca. 15 nm micelles co-loaded with elacridar and paclitaxel, and investigated their ability to overcome paclitaxel resistance in two cancer cell lines. Vitamin E, a common solubility enhancer for PEG-PE micelles, was found to have a negative effect on both particle size and encapsulation efficiencies. The human MDR1 gene-transfected and thus paclitaxel-resistant MDCKII-MDR1 P-gp overexpressing cells were used for cytotoxicity evaluation. Even though PEG-PE based micelles itself have a potential to enhance the cytotoxicity of paclitaxel, elacridar/paclitaxel-co-loaded micelles demonstrated the highest cytotoxicity compared to both free and micellar paclitaxel. The obtained results suggest that co-loading of paclitaxel and elacridar into micellar drug carriers results in promising preparations capable of overcoming paclitaxel resistance.

PEG-PE-based micelles co-loaded with paclitaxel and cyclosporine A or loaded with paclitaxel and targeted by anticancer antibody overcome drug resistance in cancer cells.

The over-expression of the P-glycoprotein (P-gp) in cancer cells is one of the main reasons of the acquired Multidrug Resistance (MDR). Combined treatment of MDR cancer cells with P-gp inhibitors and chemotherapeutic agents could result in reversal of resistance in P-gp-expressing cells. In this study, paclitaxel (PTX) was co-encapsulated in actively targeted (anticancer mAb 2C5-modified) polymeric lipid-core PEG-PE-based micelles with Cyclosporine A (CycA), which is one of the most effective first generation P-gp inhibitors. Cell culture studies performed using MDCKII (parental and MDR1) cell lines to investigate the potential MDR reversal effect of the formulations. The average size of both empty and loaded PEG2000-PE/Vitamin E mixed micelles was found between 10 and 25 nm. Zeta potentials of the formulations were found between -7 and -35 mV. The percentage of PTX in the micelles was found higher than 3% for both formulations and cumulative PTX release of about 70% was demonstrated. P-gp inhibition with CycA caused an increase in the cytotoxicity of PTX. Dual-loaded micelles demonstrated significantly higher cytotoxicity in the resistant MDCKII-MDR1 cells than micelles loaded with PTX alone. Micelle modification with mAb 2C5 results in the highest cytotoxicity against resistant cells, with or without P-gp modulator, probably because of better internalization bypassing the P-gp mechanism. Our results suggest that micelles delivering a combination of P-gp modulator and anticancer drug or micelles loaded with only PTX, but targeted with mAb 2C5 represent a promising approach to overcome drug resistance in cancer cells.

Optimization of prednisolone acetate-loaded chitosan microspheres using a 2(3) factorial design for preventing restenosis.

Prednisolone acetate (PA)-loaded microspheres were prepared by the spray-drying technique using different polymer (1% and 2%) and drug concentrations (10% and 20%). To obtain the optimum formulation, a three-factor two-level (2(3)) design was employed. The independent variables were polymer molecular weight, polymer concentration, and theoretical drug loading. Responses were the particle size, percentage of encapsulation efficiency, and the t(50%) release. The best formulation was prepared with 20% of PA and 1% of chitosan with medium molecular weight showing relative good yield of production (48.0 + or - 6.7%) and encapsulation efficiency (45.7 + or - 0.3%), and released the drug at a constant rate in 11 days.

Development and validation of an HPLC method for simultaneous determination of trimethoprim and sulfamethoxazole in human plasma.

The combination of trimethoprim (TMP) and sulfamethoxazole (SMX) is used in the treatment of many common infections such as urinary, respiratory and gastrointestinal tract infections. The aim of this study was to determine TMP and SMX simultaneously in human plasma samples by high performance liquid chromatography (HPLC) using antipyrine as the internal standard. Separation of the compounds was achieved on a reverse-phase C8 column packed with 5 microm dimethyl octadecylsilyl bonded amorphous silica (4.6 mm x 250 mm) column using a mobile phase consisted of potassium hydrogen phosphate, acetonitrile, methanol and water adjusted to pH 6.2. The mobile phase was delivered at a flow rate of 1 mL min- and the effluent was monitored using Max plot technique at 25 derees C. Retention times were 5 min for TMP, 7 min for antipyrine and 9 min for SMX. Quantitation limits were 10 ng mL(-1) for TMP and 50 ng mL(-1) for SMX. Our findings indicated that the developed HPLC method was precise, accurate, specific and sensitive for simultaneous determination of TMP and SMX. Proposed HPLC method was successfully applied for the analysis of TMP and SMX in human plasma after oral administration of a co-trimoxazole tablet to human volunteers.

Recent advances and future directions in amphiphilic cyclodextrin nanoparticles.

Cyclodextrins are known to be promising excipients in the pharmaceutical industry, with their ability to include hydrophobic guest molecules masking the physicochemical properties of the guest, such as poor water solubility, stability problems and undesired side effects. These enabling excipients, which are produced on a large scale and incorporated into various marketed products worldwide, are now modified to render amphiphilic properties that enable them to be used to prepare nanoparticles. Amphiphilic cyclodextrins have the ability to form nanoparticles without the presence of a surfactant by different preparation techniques that are discussed in this review. Classification and physicochemical properties of these interesting molecules as well as the efficacy and safety of nanoparticles prepared from different amphiphilic cyclodextrins are discussed in light of the current literature work with in vitro and in vivo findings. Cyclodextrin nanoparticles of different nature effectively carry drugs or molecules with bioavailability problems arising from poor aqueous solubility, stability under physiological conditions or side effects associated with the molecule itself or excipients used in the formulation of these problems drugs. In conclusion, amphiphilic cyclodextrins emerge as promising alternatives for tumor drug delivery and passive and active targeting with non-toxic, non-hemolytic properties as injectable, nanosized carriers.

Development of biodegradable drug releasing polymeric cardiovascular stents and in vitro evaluation.

Prednisolone acetate (PA) is insoluble in water and was chosen as a model drug for its anti-inflammatory/anti-proliferative functions. PA is incorporated into the film-based polymeric biodegradable stents to provide controlled local release of the drug during the mechanical support phase. Stent formulations were 3 mm in diameter with lengths of 150 mm. The polymer wall thickness was 145.0 +/- 4.0 microm for microsphere-containing PLGA 75 : 25 stents. The ATR-FTIR spectra showed biodegradable stent surfaces were free of drug and microspheres. Incorporation of PA into the stents increased the surface area when compared to empty and microsphere-incorporated stents. PA release from the stents containing chitosan microspheres was slower than the PA-only incorporated stents. The drug release from the stents coated with microsphere-containing PLGA 75 : 25 solutions was determined to be the slowest one (19.1% cumulative PA released in 32 days). The stents formulated with PLGA 75 : 25 polymers were considered to be more promising due to their suitable mechanical properties and controlled release of the drug.

Hyaluronic acid coated poly-epsilon-caprolactone nanospheres deliver high concentrations of cyclosporine A into the cornea.

The objective of this study was to determine cyclosporine A (Cy A) levels in ocular tissues and fluids after topical administration of poly-epsilon-caprolactone (PCL)/benzalkonium chloride (BKC) nanospheres and hyaluronic acid (HA) coated PCL/BKC nanospheres onto healthy rabbit corneas. Nanospheres were prepared by nanoprecipitation and purified by gradient-rate centrifugation. Cy A (0.1%) in either castor oil solution (group 1), PCL/BKC nanosphere formulation (group 2) or HA coated PCL/BKC nanosphere formulation (group 3) was instilled onto rabbit corneas. Tear samples were adsorbed onto Schirmer tear strips. Cy A concentrations of fluid (blood, aqueous humor, tear) and specimen extracts (cornea, conjunctiva, iris/ciliary body) were determined by high performance liquid chromatography-mass spectrometry (LC-MS). The mean corneal Cy A concentration obtained at 0.5, 1, 2, 4, 8 and 24h following instillation of the formulations ranged between 0.12 and 1.2 ng/mg tissue for group 1, 5.9-15.5 ng/mg tissue for group 2 and 11.4-23.0 ng/mg for group 3 (one-way analysis of variance (ANOVA) and pairwise tests (SNK (Student-Newman-Keuls) and Tukey); p<0.05). Conjunctival Cy A levels of group 2 and 3 were not significantly different at any of the time points tested. However, there was a significant difference between Cy A concentration of castor oil formulation and that of PCL/BKC nanosphere formulation at 1 and 8h (p<0.05). The mean iris/ciliary body concentrations obtained with the three formulations were not significantly different at any time point with the exception of group 2 levels being higher than those of groups 1 and 3 at 1h (p<0.05). The lowest ocular tear Cy A concentrations (16-114 ng/ml) were found following the instillation of HA coated PCL/BKC nanoparticles (group 3) during the time period tested. Cy A loaded PCL/BKC and HA coated PCL/BKC nanospheres are able to achieve high levels of Cy A in the cornea that is 10-15-fold higher than that is achieved with Cy A solution in castor oil. Nanosphere formulation and HA may play an important role in delivering high levels of cyclosporine A into the cornea.

Development of nonsurfactant cyclodextrin nanoparticles loaded with anticancer drug paclitaxel.

In the current formulation of clinical use paclitaxel (PCX) is associated with solubilizers that may produce severe side effects. In this study, PCX was complexed to an amphiphilic cyclodextrin (CD), 6-O-CAPRO-beta-CD, capable of forming nanoparticles spontaneously in order to mask its physicochemical properties via the formation of inclusion complexes of the drug with amphiphilic CD before the nanoparticle is formed. Complexes have been characterized with various techniques such as (1)H NMR, Fourier Transform Infrared (FTIR), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) confirming the formation of inclusion complex between PCX and 6-O-CAPRO-beta-CD. Nanospheres and nanocapsules were prepared directly from the preformed PCX/6-O-CAPRO-beta-CD inclusion complex by the nanoprecipitation technique, showing a size from 150 to 250 nm for nanospheres and from 500 to 500 nm for nanocapsules. Zeta potentials of the nanospheres and nanocapsules indicate stable colloidal dispersions within the range of -18 to -39 mV. A 12-month physical stability was demonstrated for blank nanoparticles. PCX encapsulation was high with three-fold increase in loading when nanoparticles are prepared directly from preformed inclusion complexes of the drug with 6-O-CAPRO-beta-CD. In vitro liberation profiles of PCX from CD nanoparticles show a prolonged release profile for this drug up to 12 h for nanospheres and 24 h for nanocapsules.

Safety and efficacy of amphiphilic beta-cyclodextrin nanoparticles for paclitaxel delivery.

Paclitaxel is a potent anticancer agent with limited bioavailability due to side-effects associated with solubilizer used in its commercial formulation and the tendency of the drug to precipitate in aqueous media. In this study, paclitaxel was encapsulated in amphiphilic cyclodextrin nanoparticles. Safety of blank nanoparticles was compared against commercial vehicle cremophor:ethanol (50:50 v/v) by hemolysis and cytotoxicity experiments. Data revealed that nanoparticles caused significantly less hemolysis. Results were confirmed with SEM imaging of erythrocytes treated with nanospheres, nanocapsules or commercial vehicle. Cytotoxicity of the blank carriers was evaluated against L929 cells. A vast difference between the cytotoxicity of nanoparticles and cremophor:ethanol mixture was observed. Physical stability of paclitaxel in nanoparticles was assessed for 1 month with repeated particle size and zeta potential measurements and AFM imaging. Recrystallization of paclitaxel, very typical in diluted aqueous solutions of the drug, did not take place when the drug is bound to cyclodextrin nanoparticles. Anticancer efficacy of paclitaxel-loaded nanoparticles was evaluated in comparison to paclitaxel in cremophor vehicle against MCF-7 cells. Cyclodextrin nanoparticle caused a slightly higher anticancer effect than cremophor:ethanol vehicle. Thus, amphiphilic cyclodextrin nanoparticles emerged as promising alternative formulations for injectable paclitaxel administration with low toxicity and equivalent efficacy.

Pharmacokinetics and bioequivalence study of a generic amlodipine tablet formulation in healthy male volunteers.

Two different tablets containing amlodipine besylate (CAS 111470-99-6) (Vazkor 10 mg tablet as test preparation and 10 mg tablet of the originator product as reference preparation) were investigated in 18 healthy male volunteers in order to compare the bioavailability and prove the bioequivalence between both treatments after oral single dose administration. The study was performed according to an open-label, randomized, two-period cross-over design with a wash-out phase of 21 days. Blood samples for pharmacokinetic profiling were taken up to 144 h post-dose, and amlodipine plasma concentrations were determined with a validated LC-MS/MS method. Maximum plasma concentrations (Cmax) of 6,183.7 pg/ml (test) and 5,366.7 pg/ml (reference) were achieved. Areas under the plasma concentration-time curve (AUC(0-infinity)) of 267,231.0 pg x h/ml (test) and 266,061.7 ng x h/ml (reference) were calculated. The median tmax was 5.6 h (test) and 6.1 h (reference). Plasma elimination half-lives (t 1/2) were 46.46 h (test) and 45.34 h (reference). Both primary target parameters AUC(0-infinity) and Cmax were tested parametrically by analysis of variance (ANOVA); 90% confidence intervals were between 93.20%-107.16% (AUC(0-infinity) and 103.36%-123.13% (Cmax). Bioequivalence between test and reference preparation was demonstrated since for both parameters AUC and Cmax the 90% confidence intervals of the T/R-ratios of logarithmically transformed data were in the generally accepted range of 80%-125%.

Pharmacokinetics and bioequivalence study of ranitidine film tablets in healthy male subjects.

The aim of the present study was to compare the bioavailability of ranitidine (CAS 66357-35-5) from two different ranitidine hydrochloride (CAS 66357-59-3) film tablets (Ranitab 150 mg film tablets as test preparation and 150 mg film tablets of the originator product as reference preparation). The study was conducted according to an open-label, randomised two-period cross-over design with a wash-out phase of 9 days. Blood samples for pharmacokinetic profiling were taken up to 24 h post-dose, and ranitidine plasma concentrations were determined with a validated HPLC method with UV-detection. Maximum plasma concentrations (Cmax) of 461.8 ng/ml (test) and 450.6 ng/ ml (reference) were achieved. Areas under the plasma concentration-time curve (AUC (0-infinity) of 2,488.6 ng . h/ml (test) and 2,528.8 ng . h/ml (reference) were calculated. The median tmax was 2.83 h (test) and 3.04 h (reference). Plasma elimination half-lives (t1/2) of 2.78 h (test) and 2.89 h (reference) were determined. Both primary target parameters AUC(0-infinity) and Cmax were tested parametrically by analysis of variance (ANOVA) and the 90% confidence intervals were between 91.93 %-106.98 % (AUC (0-infinity) and 92.34%-118.85% (Cmax). Bioequivalence between test and reference preparation was demonstrated since for both parameters AUC and Cmax the 90 % confidence intervals of the T/R ratios of logarithmically transformed data were in the generally accepted range of 80 %-125 %.

Pharmacokinetics and bioequivalence study of doxycycline capsules in healthy male subjects.

The aim of the present study was to compare the bioavailability of doxycycline (CAS 564-25-0) from two different doxycycline hyclate (CAS 24390-14-5) capsules (Monodoks 100 mg capsule as test preparation and 100 mg capsule of the originator product as reference preparation) in 24 healthy male subjects. The study was conducted according to an open-label, randomised two-period cross-over design with a wash-out phase of 16 days. Blood samples for pharmacokinetic profiling were taken up to 72 h post-dose, and doxycycline plasma concentrations were determined with a validated HPLC method with UV-detection. Maximum plasma concentrations (Cmax) of 1,715.1 ng/ml (test) and 1,613.3 ng/ml (reference) were achieved. Areas under the plasma concentration-time curve (AUC(0-infinity)) of 28,586.5 ng x h/ml (test) and 29,047.5 ng x h/ml (reference) were calculated. The median tmax was 1.88 h (test) and 2.00 h (reference). Plasma elimination half-lives (t1/2) of 16.49 h (test) and 16.75 h (reference) were determined. Both primary target parameters AUC(0-infinity) and Cmax were tested parametrically by analysis of variance (ANOVA) and the 92.39 %-103.53% (AUC(0-infinity)) and 98.45%-111.74% (Cmax). Bioequivalence between test and reference preparation was demonstrated since for both parameters AUC and Cmax the 90% confidence intervals of the T/R ratios of logarithmically transformed data were in the generally accepted range of 80 0%-125%.

Pharmacokinetic and bioequivalence study of meloxicam tablets in healthy male subjects.

Meloxicam (CAS 71125-38-7), a non-steroidal anti-inflammatory drug (NSAID), is used for the treatment of osteoarthritis and rheumatic arthritis. In the present study, two different oral meloxicam formulations (Melcam 15 mg tablets as test preparation and tablets of a reference preparation) were investigated in 24 healthy male subjects in order to prove bioequivalence between both preparations. A single 15 mg oral dose was administered according to an open, randomised, two-period cross-over design in the fasted state. Blood samples for the determination of meloxicam plasma concentrations were collected at pre-defined time points up to 96 h following drug administration. A wash-out period of 7-8 days separated both treatment periods. Meloxicam plasma concentrations were determined by means of a validated HPLC method with UV-detection. Maximum plasma concentrations (C(max)) of 1,146.9 ng/ml (test) and 1,064.8 ng/ml (reference) were achieved. Areas under the plasma concentration-time curve (AUC(0-infinity) of 34,499.0 ng x h/ml (test) and 33,784.3 ng x h/ml (reference) were determined. The results showed nearly identical rate and extent of drug absorption. Also further pharmacokinetic parameters were well comparable. Thus, t(max) showed values of 5.00 h for both test and reference. The plasma elimination half-life (t1/2) was 18.29 h (test) und 18.94 h (reference). Both primary target parameters C(max). and AUC(0-infinity, were tested parametrically by analysis of variance (ANOVA) and the 90% confidence intervals were between 99.46%-105.24% (AUC0-infinity)) and 103.37%-112.46% (C(max)). Bioequivalence between test and reference preparation was demonstrated since for both parameters AUC and C(max) the 90% confidence intervals of the T/R ratios of logarithmically transformed data were in the generally accepted range of 80%-125%.

Comparative pharmacokinetics of two tablet formulations of amoxicillin: bioequivalence assessment.

The aim of the present study was to compare the bioavailability of amoxicillin (CAS 26787-78-0) from two different amoxicillin tablets (Demoksil 1 g tablet as test preparation and 1 g tablet of the originator product as reference preparation). The study was conducted according to an open-label, randomised two-period cross-over design with a wash-out phase of 4-7 days. Blood samples for pharmacokinetic profiling were taken up to 10 h post-dose, and amoxicillin plasma concentrations were determined with a validated LC-MS/ MS method. Maximum plasma concentrations (C(max)) of 13,296.4 ng/ml (test) and 12,797.7 ng/ml (reference) were achieved. Areas under the plasma concentration-time curve (AUC(0-infinity)) of 39,556.7 ng x h/ml (test) and 38,599.1 ng x h/ml (reference) were calculated. The median t(max) was 1.62 h (test) and 1.54 h (reference). Plasma elimination half-lives (t(1/2)) of 1.64 h (test) and 1.65 h (reference) were determined. Both primary target parameters, AUC(0-infinity) and C(max) were tested parametrically by analysis of variance (ANOVA) and the 90% confidence intervals were between 96.76%-108.46% (AUC(0-infinity)) and 97.80%-111.98% (C(max)). Bioequivalence between test and reference preparation was demonstrated since for both parameters, AUC and C(max) the 90% confidence intervals of the T/R-ratios of logarithmically transformed data were in the generally accepted range of 80%-125%.

Bioequivalence study of sultamicillin suspensions.

Sultamicillin (CAS 76497-13-7) is a prodrug combination of ampicillin (CAS 69-53-4) and sulbactam (CAS 68373-14-8), with the antibiotic ampicillin and the beta-lactamase inhibitor sulbactam chemically linked as double ester. The present study was performed to investigate the relative bioavailability and to assess the bioequivalence of two different sultamicillin suspensions (Devasid 250 mg/5 ml as test preparation and 375 mg/7.5 ml of the originator product as reference preparation). Twenty-four healthy male volunteers received equal doses of the sultamicillin preparations according to an open, randomised, single-dose, two-period cross-over design with a wash-out phase of 7 days. Blood samples for pharmacokinetic profiling were taken up to 8 h post-dose, and ampicillin and sulbactam plasma concentrations were determined with a validated LC-MS/MS method. Maximum plasma concentrations (C(max)) of 11,267.4 ng/ml (ampicillin, test), 10,864.4 ng/ml (ampicillin, reference), 6,360.6 ng/ml (sulbactam, test and 6,410.7 ng/ml (sulbactam, reference) were achieved. Areas under the plasma concentration-time curve (AUC(0-infinity) of 17,512.9 ng x h/ml (ampicillin, test), 18,388.0 ng x h/ml (ampicillin, reference), 10,971.7 ng ng x h/ml (sulbactam, test) and 11,181.2 ng x h/ml (sulbactam, reference) were calculated. The median t(max) was 0.69 h (ampicillin, test), 0.85 h (ampicillin, reference), 0.72 h (sulbactam, Devasid) and 0.83 h (sulbactam, reference). Plasma elimination half-lives (t(1/2)) of 1.04 h (ampicillin, test), 1.03 h (ampicillin, reference), 1.26 h (sulbactam, Devasid) and 1.00 h (sulbactam, reference) were determined. Both primary target parameters AUC(0-infinity) and C(max) of ampicillin and sulbactam were tested parametrically by analysis of variance (ANOVA) and the 90% confidence intervals were between 84.58%-117.80% (AUC(0-infinity), ampicillin), 92.37%-119.93% (C(max), ampicillin), 85.81%-120.50% (AUC(0-infinity), sulbactam) and 88.41%-117.57% (C(max), sulbactam). Bioequivalence between test and reference preparation was demonstrated since for both parameters AUC and C(max) the 90% confidence intervals of the T/R-ratios of logarithmically transformed data were in the generally accepted range of 80%-125%.

Formulation and characterization of formaldehyde cross-linked degradable starch microspheres containing terbutaline sulfate.

Preparation of starch microspheres using epichlorohydrin is a time consuming method and requires around 18 hr for cross-linking reaction. To reduce reaction time, terbutaline sulfate (TBS) loaded degradable starch microspheres (DSM) were prepared using formaldehyde as the cross-linking agent. All microspheres were spherical in shape and had a porous, rough surface with a mean particle size of 18-24 microm. Whatever the cross-linking time, it was seen that the release of the TBS was not complete during the release experiments. The influence of enzyme on the degradation of microspheres was moderate. Following intravenous administration, initial uptake of microspheres by the lung was higher than those of other organs.

Implantation of vancomycin microspheres in blend with human/rabbit bone grafts to infected bone defects.

In orthopaedic applications, allografts are used for restoration of bone defects. In order to combine the effects of bone repair and to prevent the infection, antibiotic-impregnated bone grafts are under current investigation with promising early results. In this study, to preserve the stability of antibiotics and to provide appropriate release profiles for 4-6 weeks, antibiotic-loaded microspheres were administered in combination with allografts and vancomycin was the antibiotic loaded to microspheres. Particle size, surface characteristics, loading capacity and in vitro release characteristics of the microspheres with and without allografts were determined. In vivo studies were performed on rabbits and antibiotic amount was determined by a fluorescence polarization immunoassay (FPIA) method from synovial fluid sample aspirated. According to the results, although the in vitro study demonstrated effective antibiotic release of vancomycin from antibiotic-impregnated allografts for 5 weeks, in vivo conditions led to an early instability of the antibiotic (in powder form) and contrary to the high initial loading dose an effective release could not be obtained from the allografts after the first week. Following these studies, it was determined that antibiotic release over a minimum inhibitory concentration (MIC) for 6 weeks was realized from vancomycin-loaded microspheres which were implanted in a blend with allografts in bone defects. In conclusion, preservation of the antibiotic in microspheres maintained the bioactivity and provided the controlled antibiotic release, thus implantation of microspheres in a blend with allografts seemed to be a promising carrier system for the orthopaedic applications.

Mucoadhesive, thermosensitive, prolonged-release vaginal gel for clotrimazole:beta-cyclodextrin complex.

The purpose of this study was to achieve a better therapeutic efficacy and patient compliance in the treatment for vaginitis. Clotrimazole (1%) has been formulated in a vaginal gel using the thermosensitive polymer Pluronic F127 (20%) together with mucoadhesive polymers such as Carbopol 934 and hydroxypropylmethylcellulose (0.2% for both). To increase its aqueous solubility, clotrimazole was incorporated as its inclusion complex with 1:1 molar ratio with beta-cyclodextrin. The inclusion complex was thoroughly characterized using various techniques, including 1H NMR spectroscopy, FT IR spectrophotometry, differential scanning calorimetry, scanning electron microscopy, phase solubility studies, and determination of stability constant (k(1:1)). The gelation temperature and rheological behavior of different formulations at varying temperatures were measured. In vitro release profiles of the gels were determined in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin slowed down the release of clotrimazole considerably. Carbopol 934, on the other hand, was found to interact with beta-cyclodextrin, inducing precipitation. As far as rheological properties are concerned, thermosensitive in situ gelling was obtained with formulations containing drug:cyclodextrin complex rather than with free drug. Thus, the optimum formulation for a controlled-release thermosensitive and mucoadhesive vaginal gel was determined to be clotrimazole:beta-cyclodextrin 1% with 0.2% hydroxypropylmethylcellulose in Pluronic F127 gel (20%) providing continuous and prolonged release of active material above MIC values.

Cytotoxic evaluation of injectable cyclodextrin nanoparticles.

Nanoparticles were prepared using beta-CDC6, which is an amphiphilic beta-cyclodextrin derivative modified on the secondary face with 6C aliphatic esters. A nanoprecipitation technique was used to prepare the blank nanoparticles without any surfactant and nanoparticles containing Pluronic F68 as surfactant in a concentration range of 0.1 to 1%. Nanoparticle formulations were characterized by particle size distribution and zeta potential measurements. Entrapment efficiency and in-vitro release profiles were determined and the cytotoxicity of these injectable nanospheres was evaluated against mouse fibroblast L929 cell line and human polymorphonuclear cells by methlythiazolyltetrazolium assay. As far as particle size and zeta potential are concerned, there is a relationship between surfactant presence and nanoparticle characteristics. However, these effects are not significant. It was also found that surfactant presence has no effect on model drug nimodipine encapsulation but accelerates the in-vitro release of the drug. Cell culture studies on mouse fibroblasts and human polymorphonuclear cells revealed a concentration-dependent cytotoxicity more pronounced in fibroblast cells. This led to the conclusion that the use of surfactants in injectable nanoparticles prepared from amphiphilic beta-cyclodextrins may lead to altered in-vitro properties and impaired safety for the drug delivery system.