RESUMO
Increasing the tolerance of crops to water deficit is crucial for the improvement of crop production in water-restricted regions. Here, a wheat peroxidase gene (TaPrx109-B1) belonging to the class III peroxidase gene family was identified and its function in water deficit tolerance was revealed. We demonstrated that overexpression of TaPrx109-B1 reduced leaf H2O2 level and stomatal density, increased leaf relative water content, water use efficiency, and tolerance to water deficit. The expression of TaEPF1 and TaEPF2, two key negative regulators of stomatal development, were significantly upregulated in TaPrx109-B1 overexpression lines. Furthermore, exogenous H2O2 downregulated the expression of TaEPF1 and TaEPF2 and increased stomatal density, while exogenous application of diphenyleneiodonium chloride, a potent NADPH oxidase inhibitor that repressed the synthesis of H2O2, upregulated the expression of TaEPF1 and TaEPF2, decreased stomatal density, and enhanced wheat tolerance to water deficit. These findings suggest that TaPrx109-B1 influences leaf stomatal density by modulation of H2O2 level and the expression of TaEPF1 and TaEPF2. The results of the field trial showed that overexpressing TaPrx109-B1 increased grain number per spike, which reduced the yield loss caused by water deficiency. Therefore, TaPrx109-B1 has great potential in breeding wheat varieties with improved water deficit tolerance.
Assuntos
Peróxido de Hidrogênio , Proteínas de Plantas , Estômatos de Plantas , Plantas Geneticamente Modificadas , Triticum , Triticum/genética , Triticum/fisiologia , Estômatos de Plantas/fisiologia , Estômatos de Plantas/genética , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Peróxido de Hidrogênio/metabolismo , Água/metabolismo , Regulação da Expressão Gênica de Plantas , Secas , Peroxidase/metabolismo , Peroxidase/genética , Folhas de Planta/fisiologia , Folhas de Planta/genética , DesidrataçãoRESUMO
Developing efficient electrocatalysts is significant for the commercial application of electrocatalytic water splitting. 2D materials have presented great prospects in electrocatalysis for their high surface-to-volume ratio and tunable electronic properties. Particularly, MXene emerges as one of the most promising candidates for electrocatalysts, exhibiting unique advantages of hydrophilicity, outstanding conductivity, and exceptional stability. However, it suffers from lacking catalytic active sites, poor oxidation resistance, and easy stacking, leading to a significant suppression of the catalytic performance. Combining MXene with other 2D materials is an effective way to tackle the aforementioned drawbacks. In this review, the focus is on the accurate synthesis of 2D/2D MXene-based catalysts toward electrocatalytic water splitting. First, the mechanisms of electrocatalytic water splitting and the relative properties and preparation methods of MXenes are introduced to offer the basis for accurate synthesis of 2D/2D MXene-based catalysts. Then, the accurate synthesis methods for various categories of 2D/2D MXene-based catalysts, such as wet-chemical, phase-transformation, electrodeposition, etc., are systematically elaborated. Furthermore, in-depth investigations are conducted into the internal interactions and structure-performance relationship of 2D/2D MXene-based catalysts. Finally, the current challenges and future opportunities are proposed for the development of 2D/2D MXene-based catalysts, aiming to enlighten these promising nanomaterials for electrocatalytic water splitting.
RESUMO
Coupled photocatalysis without cocatalysts can maximize the utilization of photons and atoms, which puts forward higher demands on photocatalysts. Polymeric carbon nitride (CN) has become the most promising photocatalyst, but still suffers from major drawbacks of insufficient catalytic sites and low quantum efficiency. Herein, we report a fluid shear stress-assisted molecular assembly to prepare ultrathin-nanosheet-assembled acanthosphere-like CN (ASCN) with nitrogen vacancy (Nv) and carbonyl modification. Shear stress breaks the stacking interactions between layers and cuts the stacked structure into ultrathin layers, which are further reassembled into acanthosphere bundles driven by "centrifugal force". Benefitted greatly from the ultrathin nature that provides more exposed active sites and improves charge carrier separation, ASCN-3 exhibits a 20-fold higher activity than the bulk counterpart toward oxygen reduction to H2O2 coupled with 4-methoxybenzyl alcohol (4-MBA) oxidation to anisaldehyde (AA), with significantly increased turnover frequency (TOF) values (TOF: 1.69 h-1 for H2O2 and 1.02 h-1 for AA). Significantly, ASCN-3 exhibits 95.8% conversion for 4-MBA oxidation with nearly 100% selectivity. High apparent quantum yields of 11.7% and 9.3% at 420 nm are achieved for H2O2 photosynthesis and 4-MBA oxidation. Mechanism studies suggest that carbonyl induces holes concentrated at the neighboring melem unit to directly oxidize the Cα-H bond of 4-MBA to produce carbon radicals, and Nv as oxygen adsorption active site traps electrons to form a superoxide radical that further combines with the shed protons into H2O2. This work presents a simple physical method to break the layered stack of CN for creating hierarchical assembly for coupled photocatalysis.
RESUMO
Designing high-efficient bifunction catalysts with excellent catalytic activity and enhanced charge-transfer capability in both alkaline hydrogen evolution reaction (HER) and triiodide reduction reaction (IRR) is of utmost significance to advance the development of green hydrogen production and photovoltaics, respectively, yet remains a crucial challenge. Here, highly dispersed and small-sized Ni12P5 nanocrystals with narrow size distribution was well attached on the surface of N, S co-doped graphene (Ni12P5/NSG) by the facile hot-injection method. As expected, the optimized Ni12P5/NSG requires a relatively low overpotential of 132.94 ± 0.08 mV to deliver a current density of 10 mA cm-2 in alkaline condition, accompanied with remarkable long-time durability with negligible attenuation over 50 h. Density functional theory (DFT) calculations revealed that the positively synergic effect between Ni12P5 and NSG are in favor of modulating the rate determining step of the dissociation of H2O to *(OH-H), thereby upgrading its HER activity. When used as the counter electrode catalyst for IRR in DSSCs, the resultant Ni12P5/NSG exhibits extraordinary Pt-like catalytic activity and well electrochemical stability in iodide-based electrolyte, delivering a high photoelectric conversion performance (PCE) comparable to Pt. The improved PCE can be attributed to the accelerated interfacial charge-transfer capability around active sites for facilitating the reaction kinetics of IRR, as demonstrated by DFT calculations. This work provides an effective strategy for synthesizing cost-effective composites with multi-active sites and offering valuable insight into the structure-performance relationship, which is conducive to guide the synthesis of promising catalysts in the energy conversion field.
RESUMO
Benzylamine electrooxidation reaction (BAOR) is a promising route to produce value-added, easy-separated benzonitrile, and effectively hoist H2 production. However, achieving excellent performance in low alkaline medium is a huge challenge. The performance is intimately correlated with effective coupling of HER and BAOR, which can be achieved by manipulating the d-electron structure of catalyst to regulate the active species from water. Herein, we constructed a biphasic Mo0.8 Ni0.2 N-Ni3 N heterojunction for enhanced bifunctional performance toward HER coupled with BAOR by customizing the d-band centers. Experimental and theoretical calculations indicate that charge transfer in the heterojunction causes the upshift of the d-band centers, which one side facilitates to decrease water activation energy and optimize H* adsorption on Mo0.8 Ni0.2 N for promoting HER activity, the other side favors to more easily produce and adsorb OH* from water for forming NiOOH on Ni3 N and optimizing adsorption energy of benzylamine, thus catalyzing BAOR effectively. Accordingly, it shows an industrial current density of 220â mA cm-2 at 1.59â V and high Faradaic efficiencies (>99 %) for H2 production and converting benzylamine to benzonitrile in 0.1â M KOH/0.5â M Na2 SO4 . This work guides the design of excellent bifunctional electrocatalysts for the scalable production of green hydrogen and value-added products.
RESUMO
Excessive input of nitrogen fertilizer not only causes a great waste of resources but brings about a series of ecological and environmental problems. Although Small Auxin Up-regulated RNAs (SAURs) participate in diverse biological processes, the function of SAURs in the nitrogen starvation response has not been well-studied. Here, we identified 308 TaSAURs in wheat and divided them into 10 subfamilies. The promoter regions of most TaSAURs contain hormone responsive elements, and their expression levels change under the treatment of different hormones, such as IAA, MeJA, and ABA. Interestingly, overexpression of one of the TaSAUR family members, a nitrogen starvation responsive gene, TaSAUR66-5B, can promote the growth of Arabidopsis and wheat roots. In addition, overexpression of TaSAUR66-5B in Arabidopsis up-regulates the expression levels of auxin biosynthesis related genes, suggesting that overexpression TaSAUR66-5B may promote root growth by increasing the biosynthesis of auxin. Furthermore, overexpression of TaSAUR66-5B in wheat can increase the biomass and grain yields of transgenic plants, as well as the nitrogen concentration and accumulation of both shoots and grains, especially under low nitrogen conditions. This study provides important genomic information of the TaSAUR gene family and lays a foundation for elucidating the functions of TaSAURs in improving nitrogen utilization efficiency in wheat.
Assuntos
Arabidopsis , Triticum , Arabidopsis/metabolismo , Regulação da Expressão Gênica de Plantas , Ácidos Indolacéticos/metabolismo , Nitrogênio/metabolismo , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Triticum/metabolismoRESUMO
Paired electroreduction and electrooxidation of organics with water as a feedstock to produce value-added chemicals is meaningful. A comprehensive understanding of reaction mechanism is critical for the catalyst design and relative area development. Here, we have systematically studied the mechanism of the paired electroreduction and electrooxidation of organics on Fe-Mo-based phosphide heterojunctions. It is shown that active H* species for organic electroreduction originate from water. As for organic electrooxidation, among various oxygen species (OH*, OOH*, and O*), OH* free radicals derived from the first step of water dissociation are identified as active species. Furthermore, explicit reaction pathways and their paired advantages are proposed based on theoretical calculations. The paired electrolyzer powered by a solar cell shows a low voltage of 1.594 V at 100 mA cm-2, faradaic efficiency of ≥99%, and remarkable cycle stability. This work provides a guide for sustainable synthesis of various value-added chemicals via paired electrocatalysis.
RESUMO
A proton exchange membrane water electrolyzer (PEMWE) in acidic medium is a hopeful scenario for hydrogen production using renewable energy, but the grand challenge lies in substituting noble-metal catalysts. Herein, a robust electrocatalyst of V-CoP2 porous nanowires arranged on a carbon cloth is successfully fabricated by incorporating vanadium into the CoP2 lattice. Structural characterizations and theoretical analysis indicate that lattice expansion of CoP2 caused by V incorporation results in the upshift of the d-band center, which is conducive to hydrogen adsorption for boosting the hydrogen evolution reaction (HER). Besides, V promotes surface reconstruction to generate a thicker Co3 O4 layer with an oxygen vacancy that enhances acid-corrosion resistance and optimizes the adsorption of water and oxygen-containing species, thus improving activity and stability toward the oxygen evolution reaction (OER). Accordingly, it presents a superior acidic overall water splitting activity (1.47â V@10â mA cm-2 ) to Pt-C/CC||RuO2 /CC (1.59â V@10â mA cm-2 ), and remarkable stability. This work proposes a new route to design efficient non-noble metal electrocatalysts for PEMWE.
RESUMO
BACKGROUND: Currently, insufficient bone volume always occurs in the posterior maxilla which makes implantation difficult. Short implants combined with transcrestal sinus floor elevation (TSFE) may be an option to address insufficient bone volume. PURPOSE: The clinical performance of short implants combined with TSFE was compared with that of conventional implants combined with TSFE according to the survival rate. METHOD: In this systematic review and meta-analysis, we followed the Meta-Analysis of Observational Studies in Epidemiology (MOOSE) guidelines. Articles were identified through PubMed, Embase, the Cochrane Library, and manual searching. Eligibility criteria included clinical human studies. The quality assessment was performed according to the Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) guidelines. The odds ratio (OR) with its confidence interval (CI) was considered the essential outcome for estimating the effect of short implants combined with TSFE. RESULTS: The registration number is INPLASY202050092. Eleven studies met the inclusion criteria, including 1 cohort study and 10 cross-sectional studies. With respect to the 1-year survival rate, no significant effect was observed between short implants (length ≤ 8 mm) and conventional implants combined with TSFE (I2=0%, OR=1.04, 95% CI: 0.55-1.96). Similarly, no difference was seen between the two groups regarding the survival rate during the healing period (I2=10%, OR=0.74, 95% CI: 0.28-1.97) and 3-year loading (OR=1.76, 95% CI: 0.65-4.74). CONCLUSION: There was no evidence that the survival rate of short implants combined with TSFE was lower or higher than that of conventional implants combined with TSFE when the residual bone height was poor and the implant protrusion length of short implants was less than or similar to conventional implants. Nevertheless, the results should be interpreted cautiously due to the lack of random controlled trials in our meta-analysis.
Assuntos
Levantamento do Assoalho do Seio Maxilar , Estudos de Coortes , Estudos Transversais , Seio Maxilar , Estudos Observacionais como Assunto , Taxa de SobrevidaRESUMO
The photocatalytic efficiency of polymeric carbon nitride is hampered by high carrier recombination rate and low charge transfer. Herein, these issues are addressed by constructing 1D strip-like carbon nitride with a large π-electron conjugated system from carbon-doping, realizing the synchronization control of its electronic structure and morphology. Nicotinic acid, a monomer with the carboxyl group and pyridine ring, and melamine are selected for assembling the strip-like supramolecular via hydrogen bond under hydrothermal process. Both peripheral pyridine unit and hydrogen bond have significant effect on self-assembly process of nicotinic acid and melamine along one dimension to form a strip-like precursor. Subsequently, 1D thin porous strip-like carbon nitride is obtained by calcination treatment of precursor. The as-prepared 1D strip-like carbon nitride with effective π delocalization from carbon-doping and porous structure can accelerate charges and mass transfer and provide extra active sites. Both theoretical and experimental results demonstrate that carbon doping (pyridine heterocycle) narrows the bandgap via manipulating the band position and increases the π electron density. Thus, the 1D porous thin strip-like carbon nitride realizes compelling hydrogen evolution rate (126.2 µmol h-1 ), far beyond (≈18 fold) the value of polymeric carbon nitride (PCN) (7.2 µmol h-1 ) under visible light irradiation.
RESUMO
Herein, we present a new strategy for the synthesis of 2D porous MoP/Mo2 N heterojunction nanosheets based on the pyrolysis of 2D [PMo12 O40 ]3- -melamine (PMo12 -MA) nanosheet precursor from a polyethylene glycol (PEG)-mediated assembly route. The heterostructure nanosheets are ca. 20â nm thick and have plentiful pores (<5â nm). These structure features offer advantages to promote the HER activity, including the favorable water dissociation kinetics around heterojunction as confirmed by theoretical calculations, large accessible surface of 2D nanosheets, and enhanced mass-transport ability by pores. Consequently, the 2D porous MoP/Mo2 N heterojunction nanosheets exhibit excellent HER activity with low overpotentials of 89, 91 and 89â mV to achieve a current density of 10â mA cm-2 in alkaline, neutral and acidic electrolytes, respectively. The HER performance is superior to the commercial Pt/C at a current density >55â mA cm-2 in neutral medium and >190â mA cm-2 in alkaline medium.
RESUMO
Molybdenum phosphide is one of the most potential electrocatalysts for the hydrogen evolution reaction (HER), whereas it is still challenging to achieve an efficient molybdenum phosphide-based catalyst that performs well over a wide pH range. Herein, a porous nanoplate composed of small MoP flakes confined in thin N, P, S-triple-doped carbon (MoP@NPSC) was prepared by the assembly of phosphomolybdic acid (H3PMo12O40·nH2O, {PMo12}) and egg white, followed by phosphorization. Given its small size (ca. 1 nm) in favor of deriving small particles and the oxygen-rich surface with strong coordination ability, the {PMo12} cluster was selected to combine with egg white to obtain a lamellar hybrid precursor via a hydrogen bond. Through controllable phosphating, a nanoplate organized by interconnected MoP particles was generated, accompanied by the in situ formation of the N, P, S-doped carbon thin layer and pores from the pyrolysis of egg white. The plentiful pores, thin carbon coating, and multielement doping bring about promoted electrolyte/bubble diffusion, enhanced conductivity and stability, and lowered adsorption energy of hydrogen/hydroxyl, respectively. All of the above merits endow MoP@NPSC with prominent activity with low overpotentials of 50, 76, and 71 mV at 10 mA cm-2 toward the HER in alkaline, neutral, and acid media, respectively, and nearly no attenuation after 40 h of testing. Especially, compared with commercial Pt/C, MoP@NPSC exhibits similar low onset potential and even better at large current density in 1 M KOH. The electrolyzer equipped with the MoP@NPSC cathode and the NiFe-LDH anode requires only 1.52 V to deliver 10 mA cm-2 and can be powered by a solar cell (1.524 V) charged by sunlight.
RESUMO
Simultaneous highly efficient production of hydrogen and conversion of biomass into value-added products is meaningful but challenging. Herein, a porous nanospindle composed of carbon-encapsulated MoO2 -FeP heterojunction (MoO2 -FeP@C) is proposed as a robust bifunctional electrocatalyst for hydrogen evolution reaction (HER) and biomass electrooxidation reaction (BEOR). X-ray photoelectron spectroscopy analysis and theoretical calculations confirm the electron transfer from MoO2 to FeP at the interfaces, where electron accumulation on FeP favors the optimization of H2 O and H* absorption energies for HER, whereas hole accumulation on MoO2 is responsible for improving the BEOR activity. Thanks to its interfacial electronic structure, MoO2 -FeP@C exhibits excellent HER activity with an overpotential of 103 mV at 10 mA cm-2 and a Tafel slope of 48 mV dec-1 . Meanwhile, when 5-hydroxymethylfurfural is chosen as the biomass for BEOR, the conversion is almost 100%, and 2,5-furandicarboxylic acid (FDCA) is obtained with the selectivity of 98.6%. The electrolyzer employing MoO2 -FeP@C for cathodic H2 and anodic FDCA production requires only a low voltage of 1.486 V at 10 mA cm-2 and can be powered by a solar cell (output voltage: 1.45 V). Additionally, other BEORs coupled with HER catalyzed by MoO2 -FeP@C also have excellent catalytic performance, implying their good versatility.
RESUMO
Cu2O is widely used in the visible-light photocatalytic field, but its photocatalytic activity and stability still need to be further enhanced. Thus, searching for an efficient method to inhibit photocorrosion of Cu2O and boost its photogenerated charge carriers' separation is very important and challenging. Herein, Cu2O@CuS core-shell hexapetalous flowers were synthesized by hydrothermal and in-situ chemical vapor deposition (CVD) strategy. The Cu2O hexapetalous flowers were firstly obtained through hydrothermal procedure, and then CuS in-situ grew on Cu2O to form core-shell structure by CVD, which effectively inhibited the photocorrosion of Cu2O. Meanwhile, Cu2O@CuS core-shell structure could extend their light absorption ranges from 200 to 1500 nm; promote the separation of electrons and holes in photocatalytic system. Thus, under the wide-spectral region, Cu2O@CuS exhibited excellent photocatalytic performance for the degradation of tetracycline at 91% with good cycling ability, resulting from the effective separation of photogenerated charges, more free radicals such as OH and O2-, increases of utilization rate of visible-light. These results indicate that in-situ CVD strategy is a feasible method to improve visible-light photocatalytic activity and stability of Cu2O.
RESUMO
The robust photocatalytic hydrogen evolution (PHE) from water needs an effective photogenerated charge spatial separation and enough contact between reactant and catalyst, but the synthesis of catalysts with the characteristics remains a challenge. Herein, we report the design of core-shell heterostructure consisted of thin TiO2 layer uniformly coated on porous ZrO2 polyhedron for effective PHE. In this system, UiO-66-NH2, one of popular MOF with Zr as metal node, has been chosen as the precursor template due to its plentiful pores, uniform morphology, as well as the rich NH2 groups. Our results show that Ti precursor can uniformly coat on UiO-66-NH2, by means of interaction of tetrabutyl titanate (TBT) with -NH3 in UiO-66-NH2. Followed by the calcination, the Ti precursor and UiO-66-NH2 can be converted into ZrO2 and TiO2, respectively, thus leading to the formation of ZrO2@TiO2 core-shell heterostructure. The ZrO2@TiO2-500 has the high specific surface area of 52.4â¯m2â¯g-1. Besides, the intimate contact of TiO2 shell with ZrO2 core facilitates the separation and migration of photoinduced carriers, exposing more active sites for the surface photocatalytic hydrogen evolution reaction. The spectrum and electrochemical characterization further exhibit the extended life of photon-generated carrier and easy mass transfer. The optimized ZrO2@TiO2-500 shows enhanced photocatalytic rate of 39.7â¯mmolâ¯h-1â¯g-1, much higher than those of ZrO2 (0.8â¯mmolâ¯h-1â¯g-1) and TiO2 (7.6â¯mmolâ¯h-1â¯g-1).
RESUMO
An in situ catalytic etching strategy is developed to fabricate holey reduced graphene oxide along with simultaneous coupling with a small-sized Mo2 N-Mo2 C heterojunction (Mo2 N-Mo2 C/HGr). The method includes the first immobilization of H3 PMo12 O40 (PMo12 ) clusters on graphite oxide (GO), followed by calcination in air and NH3 to form Mo2 N-Mo2 C/HGr. PMo12 not only acts as the Mo heterojunction source, but also provides the Mo species that can in situ catalyze the decomposition of adjacent reduced GO to form HGr, while the released gas (CO) and introduced NH3 simultaneously react with the Mo species to form an Mo2 N-Mo2 C heterojunction on HGr. The hybrid exhibits superior activity towards the hydrogen evolution reaction with low onset potentials of 11 mV (0.5 m H2 SO4 ) and 18 mV (1 m KOH) as well as remarkable stability. The activity in alkaline media is also superior to Pt/C at large current densities (>88 mA cm-2 ). The good activity of Mo2 N-Mo2 C/HGr is ascribed to its small size, the heterojunction of Mo2 N-Mo2 C, and the good charge/mass-transfer ability of HGr, as supported by a series of experiments and theoretical calculations.
RESUMO
Cu2ZnSnS4 (CZTS) and Cu2ZnSn(S,Se)4 (CZTSSe) as promising photovoltaic materials have drawn much attention because they are environmentally benign and earth-abundant elements. In this work, the monodispersed, low-cost Cu2ZnSnS4 nanocrystals with small size have been controllably synthesized via a wet chemical routine. And CZTSSe could be easily prepared after selenization of CZTS. When they are employed as counter electrodes (CEs) for dye-sensitized solar cells (DSSCs), the power conversion efficiency (PCE) has been improved from 3.54% to 7.13% as CZTS is converted to CZTSSe, which is also compared to that of Pt (7.62%). The exact reason for the enhanced catalytic activity of I3- is discussed with the work function and density functional theory (DFT) when CZTSSe converted from CZTS. The results of a Kelvin probe suggest that the work function of CZTSSe (5.61 eV) is closer to that of Pt (5.65 eV) and higher than that of CZTS, which matched the redox shuttle potential better. According to the theory calculation, all the atomic and bond populations changed significantly when Se replaced partly the S on the CZTS system, especially in the Zn site. During the catalytic process as CEs, the adsorption energy obviously increased compared to those at other sites when I3- adsorbed on the Zn site in CZTSSe. So, Zn plays an important role for the reduction of I3- after CZTS is converted to CZTSSe. Based on above analysis, the reason for enhanced performance of DSSCs when CZTS converted to CZTSSe is mainly due to the enhancement of Zn-site activity. This work is beneficial for understanding the catalytic reaction mechanism of CZTS(Se) as CEs of DSSCs.
RESUMO
Cluster-like molybdenum phosphide particles were anchored on reduced graphene oxide (MoP/rGO) with high uniformity by using phosphomolybdic acid as a molybdenum precursor based on a robust assembly-immobilization method. Benefiting from the small size, and even distribution of the MoP particles, the MoP/rGO hybrid exhibits superior electrocatalytic activity towards the hydrogen evolution reaction both in acidic and alkaline media.
RESUMO
A low-cost catalyst for the hydrogen evolution reaction (HER) over a broad pH range is highly desired to meet the practical needs in different areas. In this study, hierarchical flower-like MoS2@MoP core-shell heterojunctions (HF-MoSP) are designed as a promising catalyst for HER over a broad pH range. The materials are obtained by the controllable phosphidation of the hierarchical MoS2 flower (HF-MoS2) composed of thin silk belt-like sheets. The phosphidation degree, P/S ratio and work function (WF) of HF-MoSP can be tuned easily over broad range by changing the phosphidation temperature. Under optimized condition, HF-MoSP exhibits excellent electrocatalytic activity for HER with a low onset overpotential of 29 mV and η of 108 mV at 10 mA cm(-2) in 0.5 M H2SO4 and retains its good activity for 30 h. In addition, the catalyst shows excellent activity in 1 M KOH with an onset overpotential of 42 mV and η of 119 mV at 10 mA cm(-2). The catalysts also exhibit obvious activity in neutral, weak acid and weak alkaline conditions. The good performance is relative to the synergy of the MoP shell and MoS2 core and the high WF of HF-MoSP close to Pt, and the large SBET of HF-MoSP benefited from the hierarchical structure. This study represents the construction of the core-shell heterojunction and provides a new way to provide the low-cost and high-performance catalyst for HER.
RESUMO
Layer-like nanocarbons with high surface area and good conductivity are promising materials for supercapacitors due to their good ability for effective charge-transfer and mass-transfer. In this paper, stacked layer-like porous carbon containing RGO (reduced graphene oxides) (LPCG) was constructed via the GO-induced assembly of gelatin followed by carbonization and activation processes. Under suitable conditions, LPCG-based materials with a thickness of about 100 nm and a high specific surface area (up to 1476 m(2) g(-1)) could be obtained. In the materials, the closed combination of RGO and porous carbon can be observed, which is favourable for the development of the synergistic effects of both components. The presence of GO can not only enhance the conductivity of LPCG-based materials, but also is essential for the formation of a thin carbon sheet with a stacked structure. Otherwise, the plate-like, non-stacked carbon with a thickness of about 500 nm could be formed in the absence of RGO. The porous structure along with the presence of RGO allows rapid charge-transfer and easy access and diffusion of electrolyte ions. As a result, the materials exhibited a high discharge specific capacitance (455 F g(-1) at 0.5 A g(-1), 366 F g(-1) at 1 A g(-1)), good rate capability (221 F g(-1) at density 30 A g(-1)) and good cycling stability. In aqueous electrolytes, the energy density could be up to 9.32 W h kg(-1) at a relatively low power density of 500 W kg(-1) with a good cycling stability (>96% over 5000 cycles). It was found that (1) the rational combination of RGO and porous carbon is essential for enhancing the capacitance performance and improving the cycling stability and (2) the high conductivity is favorable for improving the rate performance of the materials. The LPCG-based materials have extensive potential for practical applications in energy storage and conversion devices.