Artificial Extracellular Vesicles Generated from T Cells Using Different Induction Techniques.

Cell therapy is at the forefront of biomedicine in oncology and regenerative medicine. However, there are still significant challenges to their wider clinical application such as limited efficacy, side effects, and logistical difficulties. One of the potential approaches that could overcome these problems is based on extracellular vesicles (EVs) as a cell-free therapy modality. One of the major obstacles in the translation of EVs into practice is their low yield of production, which is insufficient to achieve therapeutic amounts. Here, we evaluated two primary approaches of artificial vesicle induction in primary T cells and the SupT1 cell line-cytochalasin B as a chemical inducer and ultrasonication as a physical inducer. We found that both methods are capable of producing artificial vesicles, but cytochalasin B induction leads to vesicle yield compared to natural secretion, while ultrasonication leads to a three-fold increase in particle yield. Cytochalasin B induces the formation of vesicles full of cytoplasmic compartments without nuclear fraction, while ultrasonication induces the formation of particles rich in membranes and membrane-related components such as CD3 or HLAII proteins. The most effective approach for T-cell induction in terms of the number of vesicles seems to be the combination of anti-CD3/CD28 antibody activation with ultrasonication, which leads to a seven-fold yield increase in particles with a high content of functionally important proteins (CD3, granzyme B, and HLA II).

New Carboxytriazolyl Amphiphilic Derivatives of Calix[4]arenes: Aggregation and Use in CuAAC Catalysis.

This work focuses on the synthesis of a new series of amphiphilic derivatives of calix[4]arenes for the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The aggregation properties of synthesized calix[4]arenes were studied using various techniques (fluorescence spectroscopy, nanoparticle tracking analysis, and dynamic light scattering). Increasing the length of the alkyl substituent led to stronger hydrophobic interactions, which increased polydispersity in solution. The zwitterionic nature of the synthesized calix[4]arenes was established using different types of dyes (Eosin Y for anionic structures and Rhodamine 6G for cationic structures). The synthesized calix[4]arenes were used as organic stabilizers for CuI. The catalytic efficiency of CuI-calix[4]arene was compared with that of the phase transfer catalyst tetrabutylammonium bromide (TBAB) and the surfactant sodium dodecyl sulfate (SDS). For all calixarenes, the selectivity in the CuAAC reaction was higher than that observed when TBAB and SDS were estimated.

A Hyperbranched Polyol Process for Designing and Manufacturing Nontoxic Cobalt Nanocomposite.

A method for the design and synthesis of a metallopolymer composite (CoNP) based on cobalt nanoparticles using the hyperbranched polyol process was developed. It was shown that hyperbranched polyester polyols in a melted state can be both a reducing agent and a stabilizer of metal nanoparticles at the same time. The mechanism of oxidation of hyperbranched polyol was studied using diffuse reflectance IR spectroscopy. The process of oxidation of OH groups in G4-OH started from 90 °C and finished with the oxidation of aldehyde groups. The composition and properties of nanomaterials were determined with FT-IR and UV-Vis spectroscopy, Nanoparticle Tracking Analysis (NTA), thermogravimetric analysis (TG), powder X-ray diffraction (XRD), NMR relaxation, and in vitro biological tests. The cobalt-containing nanocomposite (CoNP) had a high colloidal stability and contained spheroid polymer aggregates with a diameter of 35-50 nm with immobilized cobalt nanoparticles of 5-7 nm. The values of R2 and R1 according to the NMR relaxation method for CoNPs were 6.77 mM·ms-1 × 10-5 and 4.14 mM·ms-1 × 10-5 for, respectively. The ratio R2/R1 = 0.61 defines the cobalt-containing nanocomposite as a T1 contrast agent. The synthesized CoNPs were nonhemotoxic (HC50 > 8 g/mL) multifunctional reagents and exhibited the properties of synthetic modulators of the enzymatic activity of chymosin aspartic proteinase and exhibited antimycotic activity against Aspergillus fumigatus. The results of the study show the unique prospects of the developed two-component method of the hyperbranched polyol process for the creation of colloidal multifunctional metal-polymer nanocomposites for theranostics.

Increased Yield of Extracellular Vesicles after Cytochalasin B Treatment and Vortexing.

Extracellular vesicles (EVs) are promising therapeutic instruments and vectors for therapeutics delivery. In order to increase the yield of EVs, a method of inducing EVs release using cytochalasin B is being actively developed. In this work, we compared the yield of naturally occurring extracellular vesicles and cytochalasin B-induced membrane vesicles (CIMVs) from mesenchymal stem cells (MSCs). In order to maintain accuracy in the comparative analysis, the same culture was used for the isolation of EVs and CIMVs: conditioned medium was used for EVs isolation and cells were harvested for CIMVs production. The pellets obtained after centrifugation 2300× g, 10,000× g and 100,000× g were analyzed using scanning electron microscopy analysis (SEM), flow cytometry, the bicinchoninic acid assay, dynamic light scattering (DLS), and nanoparticle tracking analysis (NTA). We found that the use of cytochalasin B treatment and vortexing resulted in the production of a more homogeneous population of membrane vesicles with a median diameter greater than that of EVs. We found that EVs-like particles remained in the FBS, despite overnight ultracentrifugation, which introduced a significant inaccuracy in the calculation of the EVs yield. Therefore, we cultivated cells in a serum-free medium for the subsequent isolation of EVs. We observed that the number of CIMVs significantly exceeded the number of EVs after each step of centrifugation (2300× g, 10,000× g and 100,000× g) by up to 5, 9, and 20 times, respectively.

Effect of the Synthetic Approach on the Formation and Magnetic Properties of Iron-Based Nanophase in Branched Polyester Polyol Matrix.

This article shows the success of using the chemical reduction method, the polyol thermolytic process, the sonochemistry method, and the hybrid sonochemistry/polyol process method to design iron-based magnetically active composite nanomaterials in a hyperbranched polyester polyol matrix. Four samples were obtained and characterized by transmission and scanning electron microscopy, infrared spectroscopy and thermogravimetry. In all cases, the hyperbranched polymer is an excellent stabilizer of the iron and iron oxides nanophase. In addition, during the thermolytic process and hybrid method, the branched polyol exhibits the properties of a good reducing agent. The use of various approaches to the synthesis of iron nanoparticles in a branched polyester polyol matrix makes it possible to control the composition, geometry, dispersity, and size of the iron-based nanophase and to create new promising materials with colloidal stability, low hemolytic activity, and good magnetic properties. The NMR relaxation method proved the possibility of using the obtained composites as tomographic probes.

Catechol-Containing Schiff Bases on Thiacalixarene: Synthesis, Copper (II) Recognition, and Formation of Organic-Inorganic Copper-Based Materials.

For the first time, a series of catechol-containing Schiff bases, tetrasubstituted at the lower rim thiacalix[4]arene derivatives in three stereoisomeric forms, cone, partial cone, and 1,3-alternate, were synthesized. The structure of the obtained compounds was proved by modern physical methods, such as NMR, IR spectroscopy, and HRMS. Selective recognition (Kb difference by three orders of magnitude) of copper (II) cation in the series of d-metal cations (Cu2+, Ni2+, Co2+, Zn2+) was shown by UV-vis spectroscopy. Copper (II) ions are coordinated at the nitrogen atom of the imine group and the nearest oxygen atom of the catechol fragment in the thiacalixarene derivatives. High thermal stable organic-inorganic copper-based materials were obtained on the base of 1,3-alternate + Cu (II) complexes.

Counterion Concentration Profiles at the Graphene Oxide/Water Interface.

Despite enormous interest toward graphene oxide (GO) from the research community, surprisingly, little is known about its solutions. In particular, the questions related to the structure of the GO/liquid interface have not been yet properly addressed. In this report, we use a simple but efficient experimental approach to investigate the distribution of the four metal cations Na+, Cs+, Ni2+, and Gd3+ at the GO/water interface. We demonstrate that the concentration of the cations decreases exponentially with the distance from the GO surface. Such distribution for colloid systems was theoretically predicted and commonly accepted for a century but, to the best of our knowledge, has been never proved experimentally. We further demonstrate that the shape of the counterion distribution profiles depends on the pH of solution and on the fine chemical structure of GO. In particular, organic sulfates and vinylogous acids that are ionizable at different pH levels are responsible for the difference in the shapes of the concentration profiles. Unlike classical colloid systems, the diffuse layer in the GO solutions is rather broad (30-55 nm), and the concentration gradient is registered even at distances of >55 nm from the GO surface, which is typically considered as the bulk solution. The latter observation is explained by the immobilized character of the GO flakes in the nematic phase, impeding the flow of liquid and the migration of hydrated metal cations. This helps to establish and maintain the long-range concentration gradient in the space between the two parallel neighboring GO flakes. Based on the new findings and on the previously reported data, we formulate some basic principles of GO solutions.

γ-Iron Phase Stabilized at Room Temperature by Thermally Processed Graphene Oxide.

Stabilizing nanoparticles on surfaces, such as graphene, is a growing field of research. Thereby, iron particle stabilization on carbon materials is attractive and finds applications in charge-storage devices, catalysis, and others. In this work, we describe the discovery of iron nanoparticles with the face-centered cubic structure that was postulated not to exist at ambient conditions. In bulk, the γ-iron phase is formed only above 917 °C, and transforms back to the thermodynamically favored α-phase upon cooling. Here, with X-ray diffraction and Mössbauer spectroscopy we unambiguously demonstrate the unexpected room-temperature stability of the γ-phase of iron in the form of the austenitic nanoparticles with low carbon content from 0.60% through 0.93%. The nanoparticles have controllable diameter range from 30 nm through 200 nm. They are stabilized by a layer of Fe/C solid solution on the surface, serving as the buffer controlling carbon content in the core, and by a few-layer graphene as an outermost shell.

Revisiting the Mechanism of Oxidative Unzipping of Multiwall Carbon Nanotubes to Graphene Nanoribbons.

Unzipping multiwall carbon nanotubes (MWCNTs) attracted great interest as a method for producing graphene nanoribbons (GNRs). However, depending on the production method, the GNRs have been proposed to form by different mechanisms. Here, we demonstrate that the oxidative unzipping of MWCNTs is intercalation-driven, not oxidative chemical-bond cleavage as was formerly proposed. The unzipping mechanism involves three consecutive steps: intercalation-unzipping, oxidation, and exfoliation. The reaction can be terminated at any of these three steps. We demonstrate that even in highly oxidative media one can obtain nonoxidized GNR products. The understanding of the actual unzipping mechanism lets us produce GNRs with hybrid properties varying from nonoxidized through heavily oxidized materials. We answer several questions such as the reason for the innermost walls of the nanotubes remaining zipped. The intercalation-driven reaction mechanism provides a rationale for the difficulty in unzipping single-wall and few-wall CNTs and aids in a reevaluation of the data from the oxidative unzipping process.