Wear resistance and microhardness of various interim fixed prosthesis materials.

The aim of the present study is to evaluate the wear resistance and microhardness of various interim fixed prosthesis materials with different chemical compositions and curing methods. One heat-cured and four self-cured acrylic resins, and three self-cured, one light-cured, and one dual-cured composite-based materials were tested. For microhardness, samples from each group were tested after storing either at 37°C in artificial saliva for 7 days, followed by thermocycling, or in distilled water solution at 37°C for 24 h. For the evaluation of wear, the remaining samples were evaluated using a 3D scanner and a surface analysis program before loading in the chewing simulator and after every 10,000 cycles. There was a significant difference in wear behavior among the materials tested at both 10,000 and 20,000 cycles (P < 0.001). Microhardness and wear resistance were significantly different between acrylic and composite materials.

The correlation between direction and amount of retrusive movement and condyle position and joint space.

OBJECTIVE: The direction and amount of retrusive movement may be correlated with the amount of joint space and the maximum intercuspal position of the condyle. The aim of this study was to identify any such correlation using an ultrasonic jaw motion analyzer and digital volumetric tomographic (DVT) scans. METHODS: Thirty-five dental students were selected as subjects. DVT scans were obtained using a next-generation i-CAT CBCT unit, and the direction and amount of retrusive movement were measured with a 3-D analyzer. RESULTS: Spearman Rho correlation tests showed no correlation between the amount of retrusive movement and the condyle position and joint space on either the right or left side. DISCUSSION: There is sufficient reason to suggest that retrusive movement of the condyle does not occur in isolation but is influenced by glenoid fossa bone morphology.