RESUMO
Activated carbon (AC) has been applied widely in water treatment as a strong sorbent for organic contaminants and, more recently, in-situ treatment and capping for remediating legacy contaminants. In some sediment environments, the sorption kinetics onto AC may significantly impact remedial performance, particularly for large, highly hydrophobic contaminants such as PCBs, but there is limited kinetic data on such compounds. In this study, batch experiments were conducted over 52 weeks to measure PCB adsorption kinetics on 2 ACs in granular (1.1 mm diameter) and powdered (0.02 mm) form using polydimethylsiloxane (PDMS) fibers to measure aqueous concentrations over time. The experiment was conducted in glass containers with water at known PCB concentration and containing 10 mg/L natural organic matter (NOM) and activated carbon. Blanks without activated carbon were used to estimate kinetics and equilibrium uptake to PDMS and NOM. The PDMS measured aqueous concentration in AC containing slurries was then used to estimate kinetics and equilibrium uptake of the various PCBs onto the AC. Achieving equilibration of PCBs onto the powdered activated carbon (PAC) was accomplished in days to weeks, but granular activated carbon (GAC) uptake was not complete for some high molecular weight congeners in a year. The data were used to fit linear driving force models with both linear and Freundlich models of equilibrium. The models were then used to predict uptake onto powdered and granular AC during in-situ capping and treatment using the CapSim model. Slow kinetics can significantly limit the performance of granular AC in high upwelling (> 1-10 cm/day) environments. This study demonstrates the usage of polymeric passive samplers to explore sorption kinetics and equilibrium for low solubility compounds as well as the differences in performance of granular and powdered forms of AC for remediation of PCB contaminated sediment.