Porphyrin as Photosensitizers for Controlling Marine Biodegradation of Polymer Composites.

Biodegradable polymer-photosensitizer composites were developed, which is suppressed biodegradation due to bactericidal activity under light irradiation but proceeds under dark conditions. The composites exhibited antibacterial activity under light irradiation, which was attributed to the generation of singlet oxygen (1O2). Biodegradation was evaluated in seawater using the biochemical oxygen demand (BOD) method. In the dark, the composite and base polymer biodegraded to a similar degree. However, under light irradiation, the biodegradation of the composite was suppressed. In field tests, the rate of volume reduction of the composites decreased under illumination. The main cause of the suppression of biodegradation is suggested to be due to the decrease in the number of bacteria on the surface of the material and the inactivation of exoenzymes. The findings are expected to contribute to the development of biodegradable polymers that do not biodegrade during use but only when disposed of in the environment, thereby achieving on-demand degradation.

Microbial decomposition of biodegradable plastics on the deep-sea floor.

Microbes can decompose biodegradable plastics on land, rivers and seashore. However, it is unclear whether deep-sea microbes can degrade biodegradable plastics in the extreme environmental conditions of the seafloor. Here, we report microbial decomposition of representative biodegradable plastics (polyhydroxyalkanoates, biodegradable polyesters, and polysaccharide esters) at diverse deep-sea floor locations ranging in depth from 757 to 5552 m. The degradation of samples was evaluated in terms of weight loss, reduction in material thickness, and surface morphological changes. Poly(L-lactic acid) did not degrade at either shore or deep-sea sites, while other biodegradable polyesters, polyhydroxyalkanoates, and polysaccharide esters were degraded. The rate of degradation slowed with water depth. We analysed the plastic-associated microbial communities by 16S rRNA gene amplicon sequencing and metagenomics. Several dominant microorganisms carried genes potentially encoding plastic-degrading enzymes such as polyhydroxyalkanoate depolymerases and cutinases/polyesterases. Analysis of available metagenomic datasets indicated that these microorganisms are present in other deep-sea locations. Our results confirm that biodegradable plastics can be degraded by the action of microorganisms on the deep-sea floor, although with much less efficiency than in coastal settings.

Synthesis, Properties, and Biodegradability of Novel Sequence-Controlled Copolyesters Composed of Glycolic Acid, Dicarboxylic Acids, and C3 or C4 Diols.

We have previously reported that sequence-controlled copolyesters such as poly((ethylene diglycolate) terephthalate) (poly(GEGT)) showed higher melting temperatures than those of the corresponding random copolymers and high biodegradability in seawater. In this study, to elucidate the effect of the diol component on their properties, a series of new sequence-controlled copolyesters composed of glycolic acid, 1,4-butanediol or 1,3-propanediol, and dicarboxylic acid units was studied. 1,4-Butylene diglycolate (GBG) and 1,3-trimethylene diglycolate (GPG) were prepared by the reactions of 1,4-dibromobutane or 1,3-dibromopropane with potassium glycolate, respectively. Polycondensation of GBG or GPG with various dicarboxylic acid chlorides produced a series of copolyesters. Terephthalic acid, 2,5-furandicarboxylic acid, and adipic acid were used as the dicarboxylic acid units. Among the copolyesters bearing terephthalate or 2,5-furandicarboxylate units, the melting temperatures (Tm) of the copolyesters containing 1,4-butanediol or 1,2-ethanediol units were substantially higher than those of the copolyester containing the 1,3-propanediol unit. Poly((1,4-butylene diglycolate) 2,5-furandicarboxylate) (poly(GBGF)) showed a Tm at 90 °C, while the corresponding random copolymer was reported to be amorphous. The glass-transition temperatures of the copolyesters decreased as the carbon number of the diol component increased. Poly(GBGF) was found to show higher biodegradability in seawater than that of poly(butylene 2,5-furandicarboxylate) (PBF). On the other hand, the hydrolysis of poly(GBGF) was suppressed in comparison with that of poly(glycolic acid). Thus, these sequence-controlled copolyesters have both improved biodegradability compared to PBF and lower hydrolyzability than PGA.

Synthesis, Properties, and Biodegradability of Thermoplastic Elastomers Made from 2-Methyl-1,3-propanediol, Glutaric Acid and Lactide.

An innovative type of biodegradable thermoplastic elastomers with improved mechanical properties from very common and potentially renewable sources, poly(L-lactide)-b-poly(2-methyl-1,3-propylene glutarate)-b-poly(L-lactide) (PLA-b-PMPG-b-PLA)s, has been developed for the first time. PLA-b-PMPG-b-PLAs were synthesized by polycondensation of 2-methyl-1,3-propanediol and glutaric acid and successive ring-opening polymerization of L-lactide, where PMPG is an amorphous central block with low glass transition temperature and PLA is hard semicrystalline terminal blocks. The copolymers showed glass transition temperature at lower than -40 °C and melting temperature at 130-152 °C. The tensile tests of these copolymers were also performed to evaluate their mechanical properties. The degradation of the copolymers and PMPG by enzymes proteinase K and lipase PS were investigated. Microbial biodegradation in seawater was also performed at 27 °C. The triblock copolymers and PMPG homopolymer were found to show 9-15% biodegradation within 28 days, representing their relatively high biodegradability in seawater. The macromolecular structure of the triblock copolymers of PLA and PMPG can be controlled to tune their mechanical and biodegradation properties, demonstrating their potential use in various applications.

Synthesis, Properties, and Biodegradation of Sequential Poly(Ester Amide)s Containing γ-Aminobutyric Acid.

Poly(ester amide)s are attracting attention because they potentially have excellent thermal and mechanical properties as well as biodegradability. In this study, we synthesized a series of novel poly(ester amide)s by introducing γ-aminobutyric acid (GABA) regularly into polyesters, and investigated their properties and biodegradabilities. GABA is the monomer unit of biodegradable polyamide 4 (PA4). The new poly(ester amide)s were synthesized from the reaction of ammonium tosylate derivatives of alkylene bis(γ-aminobutylate) and p-nitrophenyl esters of dicarboxylic acids. All the obtained polymers showed relatively high melting temperatures (Tm). Their thermal decomposition temperatures were improved in comparison with that of PA4 and higher enough than their Tm. The poly(ester amide)s exhibited higher biodegradability in seawater than the corresponding homopolyesters. Their biodegradabilities in activated sludge were also studied.

Microbial Degradation Behavior in Seawater of Polyester Blends Containing Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx).

The microbial degradation behavior of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and its compound with several polyesters such as poly(butylene adipate-co-telephtharate) (PBAT), poly(butylene succinate) (PBS), and polylactic acid (PLA) in seawater was tested by a biological oxygen demand (BOD) method. PHBHHx showed excellent biodegradation in seawater in this study. In addition, the biodegradation rate of several blends was much influenced by the weight ratio of PHBHHx in their blends and decreased in accordance with the decrement of PHBHHX ratio. The surface morphology of the sheet was important factor for controlling the biodegradation rate of PHBHHx-containing blends in seawater.

Rapid determination of 4-aminobutyric acid and L-glutamic acid in biological decarboxylation process by capillary electrophoresis-mass spectrometry.

4-Aminobutylic acid (GABA) is a monomer of plastic polyamide 4. Bio-based polyamide 4 can be produced by using GABA obtained from biomass. The production of L-glutamic acid (Glu) from biomass has been established. GABA is produced by decarboxylation of Glu in biological process. High-performance liquid chromatography (HPLC) with derivatization is generally used to determine the concentration of GABA and Glu in reacted solution samples for the efficient production of GABA. In this study, we have investigated the rapid determination of GABA and Glu by capillary electrophoresis-mass spectrometry (CE-MS) without derivatization. The determination was achieved with the use of a shortened capillary, a new internal standard for GABA, and optimization of sheath liquid composition. Determined concentrations of GABA and Glu by CE-MS were compared with those by pre-column derivatization HPLC with phenylisothiocyanate. The determined values by CE-MS were close to those by HPLC with pre-column derivatization. These results suggest that the determination of GABA and Glu in reacted solution is rapid and simplified by the use of CE-MS.

Preparation of well-defined poly(ether-ester) macromers: photogelation and biodegradability.

Two series of poly(ether-ester)-based bis-functional macromers terminated with acrylate groups and a well-defined number of ester bonds were synthesized. One series had a chain of 1, 3 or 5 ester bonds at both ends of the central poly(ethylene glycol) block (molecular weight, about 1000), while the other had an alternating structure of oligo(ethylene glycol) each of them linked to two ester bonds, in which 6 or 10 ester bonds were incorporated equally in the macromer molecules and the total molecular weight was adjusted by about 1000. Irradiation of all poly(ether-ester) macromers mixed with camphorquinone resulted in the formation of gels. Gel yield increased and hydrophilic properties of the gels produced decreased with irradiation time. The elastic modulus of the gels decreased with the number of ester bonds. Upon incubation in a PBS solution (pH 8.04), all gels were gradually degraded with time. At 3 weeks of incubation, the degradation ratio increased linearly with the number of ester bonds per unit of molecular weight of the macromers. The order of in vivo degradation rates determined from weight loss was similar to that of the in vitro study. Thus, these poly(ether-ester) macromers may be useful for biodegradable biomaterials or tissue engineering scaffolds.

Chemical modification of chitosan. Part 15: synthesis of novel chitosan derivatives by substitution of hydrophilic amine using N-carboxyethylchitosan ethyl ester as an intermediate.

The Michael type reaction of chitosan with ethyl acrylate has been investigated. Although this reaction was quite slow in the case of chitosan, the reiteration of the reaction was an effective means for increasing the degree of substitution (DS) of ethyl ester. The N-carboxyethylchitosan ethyl ester as an intermediate was successfully substituted with various hydrophilic amines, although the simultaneous hydrolysis of the ester to carboxylic acid also occurred. Water-soluble chitosan derivatives were obtained by substitution with hydroxyalkylamines and diamines.

Production of N-acetyl-D-glucosamine from alpha-chitin by crude enzymes from Aeromonas hydrophila H-2330.

The selective and efficient production of N-acetyl-D-glucosamine (GlcNAc) was achieved from flake type of alpha-chitin by using crude enzymes derived from Aeromonas hydrophila H-2330.