Dental caries spectrum profile in Brazilian public school children and adolescents.

Dental caries remains a major public health problem, with a higher prevalence among in adolescence. The present study aimed to assess the dental caries spectrum profile in children and adolescents in Brazilian public schools. A cross-sectional study was performed in two public schools in Brazil to examine the permanent teeth of children and adolescents. The dental caries were assessed by applying the Caries Assessment Spectrum and Treatment (CAST) instrument, and the results were distributed as per disease status (healthy/codes 0-2; pre-morbidity/code 3; morbidity/code 4-5; severe morbidity/codes 6-7; mortality/code 8) and by severity as per the CAST-F1 formula (no severity, mild, moderate, and severe). The CAST data were described by age groups (8-9 y, 10-11 y, 12-13 y, 14-15 y, 16-17 y, and 18-19 y). The Kruskal-Wallis test was used to investigate differences in CAST prevalence and severity among the groups (p < 0.05). Total 598 students were enrolled. Most of the subjects were male (53.34%) and belonged to the age group of 12-13 y (34.95%). The variables CAST 0/1 (p = 0.024), CAST (p = 0.024), and CAST-F1 (p = 0.029) showed significant differences among age groups, and the post hoc test showed the differences in these variables as per the age groups of 14-15 y and 16-17 y (CAST 0/1, p = 0.047; CAST, p = 0.047; CAST-F1, p = 0.033). The dental caries spectrum increased from 8 to 19 y with a peak in the prevalence and severity in the middle of adolescence.

A prospective and randomized clinical trial evaluating the effectiveness of ART restorations with high-viscosity glass-ionomer cement versus conventional restorations with resin composite in Class II cavities of permanent teeth: two-year follow-up.

OBJECTIVE: To compare the effectiveness of ART restorations using High Viscosity Glass-ionomer cement (HVGIC) with conventional restorations using resin composite in Class II cavities of permanent teeth, in a 2-year follow-up. METHODOLOGY: Seventy-seven restorations were made with each restorative material, Equia Fil-GC Corporation (ART restorations) and Z350-3M (conventional restoration), in 54 participants in this parallel and randomized clinical trial. Restorations were evaluated at 6 months, 1 and 2 years using the ART and the modified United States Public Health Service (USPHS) criteria. Chi-square test and Survival Analysis (p<0.05) were used for statistical analysis. RESULTS: The success rates for ART restorations were 98.7% (6 months) and 95.8% (1 year) for both criteria. At 2 years, success rate was 92% and 90.3% when scored by the modified USPHS and ART criteria (p=0.466), respectively. The success rates for conventional restorations were 100% (6 months), 98.7% (1 year) and 91.5% (2 years) for both assessment criteria. ART restorations presented a lower survival rate by the criterion of ART (83.7%) when compared to the modified USPHS criterion of (87.8%), after 2 years (p=0.051). The survival of conventional restorations was 90.7% for both evaluation criteria. CONCLUSION: At the 2-years follow-up evaluation, no statistically significant difference was observed between the success rate of ART restorations with HVGIC compared to conventional restorations with resin composite in Class II cavities of permanent teeth.

Dental caries spectrum profile in Brazilian public school children and adolescents

Abstract Dental caries remains a major public health problem, with a higher prevalence among in adolescence. The present study aimed to assess the dental caries spectrum profile in children and adolescents in Brazilian public schools. A cross-sectional study was performed in two public schools in Brazil to examine the permanent teeth of children and adolescents. The dental caries were assessed by applying the Caries Assessment Spectrum and Treatment (CAST) instrument, and the results were distributed as per disease status (healthy/codes 0-2; pre-morbidity/code 3; morbidity/code 4-5; severe morbidity/codes 6-7; mortality/code 8) and by severity as per the CAST-F1 formula (no severity, mild, moderate, and severe). The CAST data were described by age groups (8-9 y, 10-11 y, 12-13 y, 14-15 y, 16-17 y, and 18-19 y). The Kruskal-Wallis test was used to investigate differences in CAST prevalence and severity among the groups (p < 0.05). Total 598 students were enrolled. Most of the subjects were male (53.34%) and belonged to the age group of 12-13 y (34.95%). The variables CAST 0/1 (p = 0.024), CAST (p = 0.024), and CAST-F1 (p = 0.029) showed significant differences among age groups, and the post hoc test showed the differences in these variables as per the age groups of 14-15 y and 16-17 y (CAST 0/1, p = 0.047; CAST, p = 0.047; CAST-F1, p = 0.033). The dental caries spectrum increased from 8 to 19 y with a peak in the prevalence and severity in the middle of adolescence.

A prospective and randomized clinical trial evaluating the effectiveness of ART restorations with high-viscosity glass-ionomer cement versus conventional restorations with resin composite in Class II cavities of permanent teeth: two-year follow-up

Abstract Objective To compare the effectiveness of ART restorations using High Viscosity Glass-ionomer cement (HVGIC) with conventional restorations using resin composite in Class II cavities of permanent teeth, in a 2-year follow-up. Methodology Seventy-seven restorations were made with each restorative material, Equia Fil-GC Corporation (ART restorations) and Z350-3M (conventional restoration), in 54 participants in this parallel and randomized clinical trial. Restorations were evaluated at 6 months, 1 and 2 years using the ART and the modified United States Public Health Service (USPHS) criteria. Chi-square test and Survival Analysis (p<0.05) were used for statistical analysis. Results The success rates for ART restorations were 98.7% (6 months) and 95.8% (1 year) for both criteria. At 2 years, success rate was 92% and 90.3% when scored by the modified USPHS and ART criteria (p=0.466), respectively. The success rates for conventional restorations were 100% (6 months), 98.7% (1 year) and 91.5% (2 years) for both assessment criteria. ART restorations presented a lower survival rate by the criterion of ART (83.7%) when compared to the modified USPHS criterion of (87.8%), after 2 years (p=0.051). The survival of conventional restorations was 90.7% for both evaluation criteria. Conclusion At the 2-years follow-up evaluation, no statistically significant difference was observed between the success rate of ART restorations with HVGIC compared to conventional restorations with resin composite in Class II cavities of permanent teeth.

Simplified occlusal replica adapted technique with glass ionomer cement for molar-incisor hypomineralization-affected molars: An 18-month follow-up.

BACKGROUND AND OVERVIEW: Molar-incisor hypomineralization (MIH) is a qualitative developmental defect of enamel, which has been a daily concern in clinical practice owing to its difficult treatment. CASE DESCRIPTION: An 11-year-old girl was admitted to the pediatric dental clinic with a symptom of severe hypersensitivity in the permanent molars owing to MIH. The treatment consisted of a simplified occlusal replica adapted technique with conventional glass ionomer cement in the MIH-affected molars, which involved laboratory and clinical stages. The patient was reexamined every 3 months, and after 18 months there was no additional tooth structure loss, restoration failure, or pain. This technique may be considered a feasible alternative to restore hypomineralized teeth owing to its reduced procedure time and good performance in the follow-up period of 18 months. CONCLUSIONS AND PRACTICAL IMPLICATIONS: The technique successfully restored the function and shape of the affected teeth, decreasing the sensitivity by means of covering the demarcated MIH opacities.

Molecular Response of Pulp Fibroblasts after Stimulation with Pulp Capping Materials.

This in vitro study evaluated cell viability and metabolism, nitric oxide release and production of two chemokines and one cytokine by cultured human dental pulp fibroblasts (HDPF) in contact with two glass ionomer cements (Ketac Molar-KM and Vitrebond-VB), Single Bond (SB) and calcium hydroxide (Dycal-DY). Cultures of HDPF were established by means of an explant technique. The specimens were prepared under sterile conditions and in disks measuring 5 mm x 2 mm obtained from a prefabricated mold and placed on a permeable membrane to avoid direct contact with the cells. Cytotoxicity was assessed by Trypan Blue exclusion method and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Nitric oxide release in cell supernatant was detected by the Griess Method whereas stromal derived factor-1 alpha (SDF-1α or CXCL12), chemokine (C-X-C motif) ligand 8 [Interleukin 8 (IL-8 or CXCL8)] and interleukin-6 (IL-6) were detected by ELISA. RT-qPCR was employed for gene expression analysis. Statistical analyses were performed by One-way ANOVA followed by Tukey's post hoc test for materials independent of the time, and Two-way ANOVA followed by Bonferroni correction test for the comparisons between materials and experimental time (p<0.05). Cytotoxic tests showed significant differences only for DY. Protein levels and mRNA expression were significantly increased for IL-8 for both periods of time. IL-6 production increased when fibroblasts were stimulated by KM. SDF-1α protein production and mRNA expression were not affected by any of the materials. There was a decrease in nitrate/nitrite levels only for KM. Although DY caused intense cell death and did not stimulate the production of the inflammatory mediators evaluated in this work, it is known that this event seems to be fundamental for the process of repair of the pulp tissue and formation of mineralized barrier. KM and VB increased production of proteins related to the inflammatory process, thus favoring tissue repair. Therefore, although these glass ionomer cements did not lead to large cell death, they should be used with caution.

Correlation between mechanical properties and stabilization time of chemical bonds in glass-ionomer cements.

The objective was to evaluate the compressive strength (CS), diametral tensile strength (DTS), flexural strength (FS), and Knoop microhardness (KH) of different conventional restorative glass-ionomer cements (GICs) and to correlate these mechanical properties (MP) with the stabilization time (ST) of their chemical bonds. Eighteen GICs were tested: Bioglass [B], Chemfil Rock [CR], Equia Forte [EF], Gold Label 2 [GL2], Gold Label 9 [GL9], Glass Ionomer Cement II [GI], Ionglass [IG], Ion Z[ IZ], Ionomaster [IM], Ionofil Plus [IP], Ionostar Plus [IS], Ketac Molar Easymix [KM], Magic Glass [MG], Maxxion R [Ma], Riva Self Cure [R], Vidrion R [V], Vitro Fil [VF] and Vitro Molar [VM]. The mechanical strength tests were performed in a universal testing machine. KH readings were done with a diamond indenter. STs were examined by Fourier Transform Infrared spectroscopy (FTIR). Data were analyzed with ANOVA and Tukey test (p<0.05). The Spearman rank test was used to evaluate the dependence between the MPs and ST results. The highest MP values were EF, GL2, GL9, GI and KM and the lowest for MG, MA, B, VF and IM. The longest ST was for GL2 and the shortest was for B. ST correlated positively with MP. GICs with longer chemical bonds ST are generally stronger and the ST value obtained from FTIR was useful in predicting the strength of GICs tested.

Molecular response of pulp fibroblasts after stimulation with pulp capping materials

Abstract This in vitro study evaluated cell viability and metabolism, nitric oxide release and production of two chemokines and one cytokine by cultured human dental pulp fibroblasts (HDPF) in contact with two glass ionomer cements (Ketac Molar-KM and Vitrebond-VB), Single Bond (SB) and calcium hydroxide (Dycal-DY). Cultures of HDPF were established by means of an explant technique. The specimens were prepared under sterile conditions and in disks measuring 5 mm x 2 mm obtained from a prefabricated mold and placed on a permeable membrane to avoid direct contact with the cells. Cytotoxicity was assessed by Trypan Blue exclusion method and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Nitric oxide release in cell supernatant was detected by the Griess Method whereas stromal derived factor-1 alpha (SDF-1α or CXCL12), chemokine (C-X-C motif) ligand 8 [Interleukin 8 (IL-8 or CXCL8)] and interleukin-6 (IL-6) were detected by ELISA. RT-qPCR was employed for gene expression analysis. Statistical analyses were performed by One-way ANOVA followed by Tukey's post hoc test for materials independent of the time, and Two-way ANOVA followed by Bonferroni correction test for the comparisons between materials and experimental time (p<0.05). Cytotoxic tests showed significant differences only for DY. Protein levels and mRNA expression were significantly increased for IL-8 for both periods of time. IL-6 production increased when fibroblasts were stimulated by KM. SDF-1α protein production and mRNA expression were not affected by any of the materials. There was a decrease in nitrate/nitrite levels only for KM. Although DY caused intense cell death and did not stimulate the production of the inflammatory mediators evaluated in this work, it is known that this event seems to be fundamental for the process of repair of the pulp tissue and formation of mineralized barrier. KM and VB increased production of proteins related to the inflammatory process, thus favoring tissue repair. Therefore, although these glass ionomer cements did not lead to large cell death, they should be used with caution.

Resumo Este estudo avalia in vitro a viabilidade e metabolismo celular, a liberação de óxido nítrico e a produção de duas quimiocinas e uma citocina por fibroblastos de polpa dentária humana em cultura (FPDH) em contato com dois cimentos de ionômero de vidro (Ketac Molar-KM e Vitrebond-VB), Single Bond (SB) e hidróxido de cálcio (Dycal-DY). As culturas de FPDH foram estabelecidas por meio de uma técnica de explante. As amostras foram preparadas em condições estéreis e em discos de 5 mm x 2 mm, obtidas de um molde pré-fabricado e colocadas em uma membrana permeável (Maxicell 24 W 0,4 µm) para evitar o contato direto com as células. A citotoxicidade foi avaliada pelo método de exclusão de Trypan Blue e pelo ensaio de MTT. A liberação de óxido nítrico no sobrenadante celular foi detectada pelo método Griess, enquanto fator 1 derivado do estroma (SDF-1α ou CXCL12), interleucina-8 (IL-8 ou CXCL8) and interleucina-6 (IL-6) foram detectados por ELISA. RT-qPCR foi empregada para análise de expressão gênica. As análises estatísticas foram realizadas por ANOVA a 1 critério, seguida pelo pós-teste de Tukey para os materiais independentes do tempo, e ANOVA a 2 critérios, seguida pelo teste de correção de Bonferroni para comparações entre materiais e tempo experimental (p<0,05). Os testes citotóxicos mostraram diferenças significativas apenas para DY. Os níveis da proteína e a expressão de RNAm para IL-8 aumentaram significativamente para ambos os tempos estudados. A produção de IL-6 aumentou quando os fibroblastos foram estimulados por KM. A produção da proteína e a expressão de RNAm para SDF-1α não foram afetadas por nenhum dos materiais. Houve uma diminuição nos níveis de nitrato/nitrito apenas para KM. Embora o DY tenha causado intensa morte celular e não tenha estimulado a produção dos mediadores inflamatórios avaliados neste trabalho, sabe-se que esse evento parece ser fundamental para o processo de reparo do tecido pulpar e formação de barreira mineralizada. Os cimentos de ionômero de vidro utilizados aumentaram a produção de proteínas relacionadas ao processo inflamatório, favorecendo a reparação tecidual e, portanto, esses materiais, embora não causem grande morte celular, devem ser utilizados com cautela.

Correlation between mechanical properties and stabilization time of chemical bonds in glass-ionomer cements

Abstract The objective was to evaluate the compressive strength (CS), diametral tensile strength (DTS), flexural strength (FS), and Knoop microhardness (KH) of different conventional restorative glass-ionomer cements (GICs) and to correlate these mechanical properties (MP) with the stabilization time (ST) of their chemical bonds. Eighteen GICs were tested: Bioglass [B], Chemfil Rock [CR], Equia Forte [EF], Gold Label 2 [GL2], Gold Label 9 [GL9], Glass Ionomer Cement II [GI], Ionglass [IG], Ion Z[ IZ], Ionomaster [IM], Ionofil Plus [IP], Ionostar Plus [IS], Ketac Molar Easymix [KM], Magic Glass [MG], Maxxion R [Ma], Riva Self Cure [R], Vidrion R [V], Vitro Fil [VF] and Vitro Molar [VM]. The mechanical strength tests were performed in a universal testing machine. KH readings were done with a diamond indenter. STs were examined by Fourier Transform Infrared spectroscopy (FTIR). Data were analyzed with ANOVA and Tukey test (p<0.05). The Spearman rank test was used to evaluate the dependence between the MPs and ST results. The highest MP values were EF, GL2, GL9, GI and KM and the lowest for MG, MA, B, VF and IM. The longest ST was for GL2 and the shortest was for B. ST correlated positively with MP. GICs with longer chemical bonds ST are generally stronger and the ST value obtained from FTIR was useful in predicting the strength of GICs tested.

Mechanical and optical properties of conventional restorative glass-ionomer cements - a systematic review.

OBJECTIVES: To perform a systematic review of test methodologies on conventional restorative glass-ionomer cement (GIC) materials for mechanical and optical properties to compare the results between different GICs. MATERIAL AND METHODS: Screening of titles and abstracts, data extraction, and quality assessments of full-texts were conducted in search for in vitro studies on conventional GICs that follow the relevant specifications of ISO standards regarding the following mechanical and optical properties: compressive strength, flexural strength, color, opacity and radiopacity. SOURCES: The Latin American and Caribbean Health Sciences (LILACS), Brazilian Bibliography of Dentistry (BBO) databases from Latin-American and Caribbean System on Health Sciences Information (BIREME) and PubMed/Medline (US National Library of Medicine - National Institutes of Health) databases were searched regardless of language. Altogether, 1146 in vitro studies were selected. Two reviewers independently selected and assessed the articles according to pre-established inclusion/exclusion criteria. Among all the properties investigated, only one study was classified as being of fair quality that tested compressive strength and was included. It was observed that many authors had not strictly followed ISO recommendations and that, for some properties (diametral tensile strength and microhardness), there are no guidelines provided. CONCLUSIONS: It was not possible to compare the results for the mechanical and optical properties of conventional restorative GICs due to the lack of standardization of studies.

Mechanical and optical properties of conventional restorative glass-ionomer cements - a systematic review

Abstract Objectives To perform a systematic review of test methodologies on conventional restorative glass-ionomer cement (GIC) materials for mechanical and optical properties to compare the results between different GICs. Material and Methods Screening of titles and abstracts, data extraction, and quality assessments of full-texts were conducted in search for in vitro studies on conventional GICs that follow the relevant specifications of ISO standards regarding the following mechanical and optical properties: compressive strength, flexural strength, color, opacity and radiopacity. Sources The Latin American and Caribbean Health Sciences (LILACS), Brazilian Bibliography of Dentistry (BBO) databases from Latin-American and Caribbean System on Health Sciences Information (BIREME) and PubMed/Medline (US National Library of Medicine - National Institutes of Health) databases were searched regardless of language. Altogether, 1146 in vitro studies were selected. Two reviewers independently selected and assessed the articles according to pre-established inclusion/exclusion criteria. Among all the properties investigated, only one study was classified as being of fair quality that tested compressive strength and was included. It was observed that many authors had not strictly followed ISO recommendations and that, for some properties (diametral tensile strength and microhardness), there are no guidelines provided. Conclusions It was not possible to compare the results for the mechanical and optical properties of conventional restorative GICs due to the lack of standardization of studies.

Proximal retention grooves may increase early fracture strength of ART restorations / Sulcos de retenção proximal podem aumentar a resistência a fratura precoce de restaurações de ART

Objective: To evaluate the fracture resistance (RF) of Class II Glass-ionomer Cement (GIC) ART restorations with and without proximal retentions. Material and Methods: 20 freshly extracted human molars were used. Forty (40) standard Mesial-Occlusal (MO) and DistalOcclusal (DO) preparations (20 for each material) were performed with a 245 bur. The unprepared surfaces of the teeth were protected with nail polish and the specimens submerged in 0.5Mol EDTA solution, pH 7.4 for 8h under stirring. The preparations were finished with dentine spoons and 50% received proximal retention with # 3 excavators. 20 cavities were restored with Chemfil Rock (10 with retention and 10 without retention) and 20 cavities were restored with Equia Fil (10 with retention and 10 with no retention) and were stored in an oven at 37ºC and 100% relative humidity for 24h and submitted to axial compression loading in Test Machine - EMIC at a rate of 0.5 mm / minute, until restoration fracture occurred. The values were analyzed by two-way ANOVA (p<0.05). Results: ChemFil Rock presented 300.84 (69.20) (without retention) and 361.70 (81.08) (with retention) and Equia Fil showed 314.60 (69.97) (without retention) and 366.67 (103.38) (with retention). Data obtained with retention were statistically superior to those obtained with non-retained ART restorations (p=0.014). No statistical differences were detected between materials (p=0.761). Conclusion: Retentive grooves improved fracture resistance of Class II GIC ART restorations. (AU)

Objetivo: avaliar a resistência à fratura (FR) de restaurações de ART de Classe II de Cimento de ionômero de vidro (CIV) com e sem retenções proximais. Material e Métodos: Foram utilizados 20 molares humanos recém-extraídos. 40 cavidades padronizadas no sentido Mesial-Oclusal (MO) e Oclusal-Distal (OD) (20 para cada material) foram realizadas com uma broca 245. Os preparos cavitários foram submersos em solução 0,5 mol Mol EDTA, pH 7,4 por 8h sob agitação e foram finalizados com colheres de dentina, nos quais 50% receberam retenções proximais com escavadores #3. 20 cavidades foram restauradas com Chemfil Rock (10 com e 10 sem retenção) e 20 cavidades foram restauradas com Equia Fil (10 com e 10 sem retenção) e armazenadas em estufa a 37ºC e 100% de umidade relativa por 24h e submetidos a carga axial de compressão na máquina de ensaios EMIC a uma taxa de 0,5mm/min, até que a fratura de restauração ocorresse. Os valores foram analisados por ANOVA twoway (p<0,05). Resultados: ChemFil Rock apresentou 300.84 (69.20) (sem retenção) e 361.70 (81.08) (com retenção) e o Equia Fil apresentou 314.60 (69.97) (sem retenção) e 366.67 (103.38) (com retenção). Os dados obtidos com retenção foram estatisticamente superiores àqueles sem retenção (p=0.014). Não houve diferença estatística entre os materiais (p=0.761). Conclusão: Os sulcos retentivos melhoraram a resistência à fratura de restaurações de ART de Classe II de Cimento de ionômero de vidro (CIV).(AU)

Dental Pulp Fibroblasts Response after Stimulation with HEMA and Adhesive System.

This study evaluated in vitro cell viability and metabolism, nitric oxide release and production of chemokines by cultured human dental pulp fibroblasts (DPF) under contact with HEMA and Single Bond. Cultures of DPF were established by means of an explant technique. Once plated, cells were kept under contact with increasing concentrations of HEMA (10, 100 and 1000 nM) or Single Bond (SB) [10-fold serially diluted in culture medium (10-4, 10-3 and 10-2 v/v)] and also with polymerized SB components. Cytotoxicity was assessed by Trypan Blue exclusion method and MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay. Nitric oxide release on cell supernatant was detected by Griess Method whereas chemokines (CXCL12 and CXCL8) were detected by ELISA. RT-qPCR was employed for chemokines gene expression analysis. Cytotoxic tests showed significant differences for SB 10-2. None of the tested materials significantly altered NO levels. Protein levels of CXCL12 were significantly decreased only by HEMA. On the other hand, while CXCL12 mRNA remained unaltered, gene expression of CXCL8 had significant decrease with all materials, except for polymerized SB. In conclusion, Single Bond and HEMA at various concentrations, decreased expression and production of molecules involved in inflammatory processes and, therefore, the use of adhesive systems such as pulp capping materials must be viewed with caution due to its large cytotoxic effect when in close contact with the pulp.

Using UV light for adhesive remnant removal after debonding of orthodontic accessories.

The objective of this study was to assess the effect of a UV light-based auxiliary illumination on adhesive remnant (AR) removal after orthodontic debonding. Sixty human molars were divided according to the adhesive used for bonding: O-opaque; LF-low fluorescence; and HF-high fluorescence. After debonding, the teeth were subdivided according to the AR removal method: No UV light or With UV light. After AR removal, the teeth were polished. Direct visual analysis, scanning electron microscopy (SEM) and time quantification for AR removal analyses were performed (Fisher-Freeman-Halton, Fisher's exact, chi-square trend, ANOVA, and independent t-tests; α = 5%). Concerning the adhesives, there was no significant difference among direct visual, SEM and time analyses for AR removal (p ≥ 0.05). Regarding AR removal methods, a similarity among the subgroups was verified for direct visual and SEM analyses (p≥0.05). However, a significant trend was verified for the with UV light method to produce greater marks, and the no UV light method, to produce a greater rate of samples with AR before polishing (p = 0.015). AR removal with light was significantly quicker in comparison with the no UV light method (p < 0.0001). The use of UV light may aid orthodontists in removing AR more thoroughly and in less time. However, they should receive special training to apply this technology, and should never dismiss the final polishing procedure.

Dental pulp fibroblasts response after stimulation with hema and adhesive system

Abstract This study evaluated in vitro cell viability and metabolism, nitric oxide release and production of chemokines by cultured human dental pulp fibroblasts (DPF) under contact with HEMA and Single Bond. Cultures of DPF were established by means of an explant technique. Once plated, cells were kept under contact with increasing concentrations of HEMA (10, 100 and 1000 nM) or Single Bond (SB) [10-fold serially diluted in culture medium (10-4, 10-3 and 10-2 v/v)] and also with polymerized SB components. Cytotoxicity was assessed by Trypan Blue exclusion method and MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay. Nitric oxide release on cell supernatant was detected by Griess Method whereas chemokines (CXCL12 and CXCL8) were detected by ELISA. RT-qPCR was employed for chemokines gene expression analysis. Cytotoxic tests showed significant differences for SB 10-2. None of the tested materials significantly altered NO levels. Protein levels of CXCL12 were significantly decreased only by HEMA. On the other hand, while CXCL12 mRNA remained unaltered, gene expression of CXCL8 had significant decrease with all materials, except for polymerized SB. In conclusion, Single Bond and HEMA at various concentrations, decreased expression and production of molecules involved in inflammatory processes and, therefore, the use of adhesive systems such as pulp capping materials must be viewed with caution due to its large cytotoxic effect when in close contact with the pulp.

Resumo Este estudo avaliou in vitro a viabilidade e metabolismo celular, liberação de óxido nítrico e produção de quimiocinas em cultura de fibroblastos de polpa dental humana (DPF) em contato com HEMA e Single Bond. Culturas de DPF foram estabelecidas por meio de uma técnica de explante. Uma vez plaqueadas, as células foram mantidas em contato com concentrações crescentes de HEMA (10, 100 e 1000 nM) ou Single Bond (SB) [10 vezes diluídas em série em meio de cultura (10-4, 10-3 e 10-2 v/v)] e também com SB polimerizado. A citotoxicidade foi avaliada pelo método de exclusão de Trypan Blue e pelo ensaio de 3-(4,5-dimetiltiazol-2-il)-2,5-difeniltetrazólio brometo (MTT). A liberação de óxido nítrico no sobrenadante celular foi detectada pelo método de Griess, enquanto as quimiocinas (CXCL12 e CXCL8) foram detectadas por ELISA. RT-qPCR foi empregada para análise de expressão gênica de quimiocinas. Testes citotóxicos mostraram diferenças significativas para SB 10-2. Nenhum dos materiais testados alterou significativamente os níveis de NO. Os níveis de proteína de CXCL12 foram significativamente diminuídos apenas pelo HEMA. Por outro lado, enquanto o RNAm de CXCL12 permaneceu inalterado, a expressão gênica de CXCL8 teve redução significativa com todos os materiais, com exceção do SB polimerizado. Em conclusão, Single Bond e HEMA, em várias concentrações, diminuíram a expressão e produção de moléculas envolvidas em processos inflamatórios e, portanto, o uso de sistemas adesivos, como o material protetor da polpa, deve ser visto com cautela devido ao seu grande efeito citotóxico quando em contato com a polpa.

Randomized clinical trial of encapsulated and hand-mixed glass-ionomer ART restorations: one-year follow-up.

This prospective, randomized, split-mouth clinical trial evaluated the clinical performance of conventional glass ionomer cement (GIC; Riva Self-Cure, SDI), supplied in capsules or in powder/liquid kits and placed in Class I cavities in permanent molars by the Atraumatic Restorative Treatment (ART) approach. A total of 80 restorations were randomly placed in 40 patients aged 11-15 years. Each patient received one restoration with each type of GIC. The restorations were evaluated after periods of 15 days (baseline), 6 months, and 1 year, according to ART criteria. Wilcoxon matched pairs, multivariate logistic regression, and Gehan-Wilcoxon tests were used for statistical analysis. Patients were evaluated after 15 days (n=40), 6 months (n=34), and 1 year (n=29). Encapsulated GICs showed significantly superior clinical performance compared with hand-mixed GICs at baseline (p=0.017), 6 months (p=0.001), and 1 year (p=0.026). For hand-mixed GIC, a statistically significant difference was only observed over the period of baseline to 1 year (p=0.001). Encapsulated GIC presented statistically significant differences for the following periods: 6 months to 1 year (p=0.028) and baseline to 1 year (p=0.002). Encapsulated GIC presented superior cumulative survival rate than hand-mixed GIC over one year. Importantly, both GICs exhibited decreased survival over time. Encapsulated GIC promoted better ART performance, with an annual failure rate of 24%; in contrast, hand-mixed GIC demonstrated a failure rate of 42%.

Association Between Presence of Enamel Defects, Dental Caries and Socioeconomic Conditions on Brazilian Children

Objective: To verify the relationship between developmental enamel defects (DED) in permanent incisors and socioeconomic conditions and dental caries in children within the life course context. Material and Methods: A total of 350 children aged 9-11 years from 13 public schools in the city of Bauru, Brazil were examined. Clinical exams were performed to observe the presence of caries and developmental enamel defects using the DMFT and DED indexes, respectively. In addition, information about family income and parental schooling was collected. Statistical analysis used the Spearman Correlation Coefficient and the Chi-square test to verify the association between DED, socioeconomic conditions and dental caries. The significance level adopted was 5%. Results: Association between presence of dental caries and DED (p=0.04), delimited opacity (p=0.02) and opacity (p=0.01) was observed. Inverse correlation for the decayed component with maternal schooling and family income was also verified. Regarding the types of development enamel defect (DED), correlation between delimited opacity, opacity and DED with the DMFT index was observed. Conclusion: The results of this study indicated association between enamel defects and caries, as well as correlation between income and parental schooling and dental caries.

Using UV light for adhesive remnant removal after debonding of orthodontic accessories

Abstract The objective of this study was to assess the effect of a UV light-based auxiliary illumination on adhesive remnant (AR) removal after orthodontic debonding. Sixty human molars were divided according to the adhesive used for bonding: O-opaque; LF-low fluorescence; and HF-high fluorescence. After debonding, the teeth were subdivided according to the AR removal method: No UV light or With UV light. After AR removal, the teeth were polished. Direct visual analysis, scanning electron microscopy (SEM) and time quantification for AR removal analyses were performed (Fisher-Freeman-Halton, Fisher's exact, chi-square trend, ANOVA, and independent t-tests; α = 5%). Concerning the adhesives, there was no significant difference among direct visual, SEM and time analyses for AR removal (p ≥ 0.05). Regarding AR removal methods, a similarity among the subgroups was verified for direct visual and SEM analyses (p≥0.05). However, a significant trend was verified for the with UV light method to produce greater marks, and the no UV light method, to produce a greater rate of samples with AR before polishing (p = 0.015). AR removal with light was significantly quicker in comparison with the no UV light method (p < 0.0001). The use of UV light may aid orthodontists in removing AR more thoroughly and in less time. However, they should receive special training to apply this technology, and should never dismiss the final polishing procedure.

Randomized clinical trial of encapsulated and hand-mixed glass-ionomer ART restorations: one-year follow-up

Abstract Objective This prospective, randomized, split-mouth clinical trial evaluated the clinical performance of conventional glass ionomer cement (GIC; Riva Self-Cure, SDI), supplied in capsules or in powder/liquid kits and placed in Class I cavities in permanent molars by the Atraumatic Restorative Treatment (ART) approach. Material and Methods A total of 80 restorations were randomly placed in 40 patients aged 11-15 years. Each patient received one restoration with each type of GIC. The restorations were evaluated after periods of 15 days (baseline), 6 months, and 1 year, according to ART criteria. Wilcoxon matched pairs, multivariate logistic regression, and Gehan-Wilcoxon tests were used for statistical analysis. Results Patients were evaluated after 15 days (n=40), 6 months (n=34), and 1 year (n=29). Encapsulated GICs showed significantly superior clinical performance compared with hand-mixed GICs at baseline (p=0.017), 6 months (p=0.001), and 1 year (p=0.026). For hand-mixed GIC, a statistically significant difference was only observed over the period of baseline to 1 year (p=0.001). Encapsulated GIC presented statistically significant differences for the following periods: 6 months to 1 year (p=0.028) and baseline to 1 year (p=0.002). Encapsulated GIC presented superior cumulative survival rate than hand-mixed GIC over one year. Importantly, both GICs exhibited decreased survival over time. Conclusions Encapsulated GIC promoted better ART performance, with an annual failure rate of 24%; in contrast, hand-mixed GIC demonstrated a failure rate of 42%.

Surface roughness, gloss and color change of different composites after exposure to ultimate challenges

Aim: The study aimed to investigate the effect of the association of chemical and mechanical degradation on the surface roughness, gloss and color of nano and microfilled composites. Method: Disc-shaped specimens (n=10) were prepared for three nanocomposites (Filtek Z350XT, IPS Empress Direct, Charisma Diamond) and three microfilled composites (Estelite Σ Quick, Durafill VS, Renamel). After polishing, baseline surface roughness, gloss and color measurements were obtained. Specimens were submitted subsequently to the following challenges: chemical for 1 week (Hydrochloric acid, Coca-Cola and Red Wine) and mechanical (Toothbrushing). Surface roughness and gloss data were analyzed by Kruskal-Wallis followed by Dunn's test. Color difference (ΔE) was analyzed by one-way ANOVA and Tukey test. Results: The initial data were compared with those after challenges using the Wilcoxon test (p<0.05). All composites showed a significant increase (p<0.05) of surface roughness, after overstress. Filtek Z350 XT and Renamel had the lowest final surface roughness values and roughness increase (p<0.05). The comparative analysis revealed that Estelite Σ Quick and Renamel did not significantly change the gloss after challenges (p=0.185). Filtek Z350 XT and IPS Empress Direct had higher color variations, after the challenges than the other resins (p<0.05). Conclusion: Chemical and mechanical challenges influence on characteristics of all composites, except for gloss on Estelite Σ Quick and Renamel composites (AU)