Modelling wound area in studies of wound healing interventions.

BACKGROUND: Experimental studies of wound healing often use survival analysis and time to event outcomes or differences in wound area at a specific time point. However, these methods do not use a potentially large number of observations made over the course of a trial and may be inefficient. A model-based approach can leverage all trial data, but there is little guidance on appropriate models and functional forms to describe wound healing. METHODS: We derive a general statistical model and review a wide range of plausible mathematical models to describe wound healing. We identify a range of possible derived estimands and their derivation from the models. Using data from a trial of an intervention to promote ulcer healing in patients affected by leprosy that included three measurement methods repeated across the course of the study, we compare the goodness-of-fit of the models using a range of methods and estimate treatment effects and healing rate functions with the best-fitting models. RESULTS: Overall, we included 5,581 ulcer measurements of 1,578 unique images from 130 patients. We examined the performance of a range of models. The square root, log square root, and log quadratic models were the best fitting models across all outcome measurement methods. The estimated treatment effects magnitude and sign varied by time post-randomisation, model type, and outcome type, but across all models there was little evidence of effectiveness. The estimated effects were significantly more precise than non-parametric alternatives. For example, estimated differences from the three outcome measurements at 42-days post-randomisation were - 0.01 cm2 (-0.77, 0.74), -0.44 cm2 (-1.64, 0.76), and 0.11 cm2 (-0.87, 1.08) using a non-parametric method versus - 0.03 cm2 (-0.14, 0.06), 0.06 cm2 (-0.05, 0.17), and 0.03 cm2 (-0.07, 0.17) using a square-root model. CONCLUSIONS: Model-based analyses can dramatically improve the precision of estimates but care must be taken to carefully compare and select the best fitting models. The (log) square-root model is strongly recommended reflecting advice from a century ago.

3D-ink-extruded titanium scaffolds with porous struts and bioactive supramolecular polymers for orthopedic implants.

Porous titanium addresses the longstanding orthopedic challenges of aseptic loosening and stress shielding. This work expands on the evolution of porous Ti with the manufacturing of hierarchically porous, low stiffness, ductile Ti scaffolds via direct-ink write (DIW) extrusion and sintering of inks containing Ti and NaCl particles. Scaffold macrochannels were filled with a subtherapeutic dose of recombinant bone morphogenetic protein-2 (rhBMP-2) alone or co-delivered within a bioactive supramolecular polymer slurry (SPS) composed of peptide amphiphile nanofibrils and collagen, creating four treatment conditions (Ti struts: microporous vs. fully dense; BMP-2 alone or with SPS). The BMP-2-loaded scaffolds were implanted bilaterally across the L4 and L5 transverse processes in a rat posterolateral lumbar fusion model. In-vivo bone growth in these scaffolds is evaluated with synchrotron X-ray computed microtomography (µCT) to study the effects of strut microporosity and added biological signaling agents on the bone formation response. Optical and scanning electron microscopy confirms the ∼100 µm space-holder micropore size, high-curvature morphology, and pore fenestrations within the struts. Uniaxial compression testing shows that the microporous strut scaffolds have low stiffness and high ductility. A significant promotion in bone formation was observed for groups utilizing the SPS, while no significant differences were found for the scaffolds with the incorporation of micropores. STATEMENT OF SIGNIFICANCE: By 2050, the anticipated number of people aged 60 years and older worldwide is anticipated to double to 2.1 billion. This rapid increase in the geriatric population will require a corresponding increase in orthopedic surgeries and more effective materials for longer indwelling times. Titanium alloys have been the gold standard of bone fusion and fixation, but their use has longstanding limitations in bone-implant stiffness mismatch and insufficient osseointegration. We utilize 3D-printing of titanium with NaCl space holders for large- and small-scale porosity and incorporate bioactive supramolecular polymers into the scaffolds to increase bone growth. This work finds no significant change in bone ingrowth via space-holder-induced microporosity but significant increases in bone ingrowth via the bioactive supramolecular polymers in a rat posterolateral fusion model.

A bioactive supramolecular and covalent polymer scaffold for cartilage repair in a sheep model.

Regeneration of hyaline cartilage in human-sized joints remains a clinical challenge, and it is a critical unmet need that would contribute to longer healthspans. Injectable scaffolds for cartilage repair that integrate both bioactivity and sufficiently robust physical properties to withstand joint stresses offer a promising strategy. We report here on a hybrid biomaterial that combines a bioactive peptide amphiphile supramolecular polymer that specifically binds the chondrogenic cytokine transforming growth factor ß-1 (TGFß-1) and crosslinked hyaluronic acid microgels that drive formation of filament bundles, a hierarchical motif common in natural musculoskeletal tissues. The scaffold is an injectable slurry that generates a porous rubbery material when exposed to calcium ions once placed in cartilage defects. The hybrid material was found to support in vitro chondrogenic differentiation of encapsulated stem cells in response to sustained delivery of TGFß-1. Using a sheep model, we implanted the scaffold in shallow osteochondral defects and found it can remain localized in mechanically active joints. Evaluation of resected joints showed significantly improved repair of hyaline cartilage in osteochondral defects injected with the scaffold relative to defects injected with the growth factor alone, including implantation in the load-bearing femoral condyle. These results demonstrate the potential of the hybrid biomimetic scaffold as a niche to favor cartilage repair in mechanically active joints using a clinically relevant large-animal model.

If the Crown Fits: Sterically Demanding N-Heterocyclic Carbene Promotes the Formation of Au8Pt Nanoclusters.

While N-heterocyclic carbenes (NHCs) have recently been shown to be effective ligands for gold nanoclusters, very few examples of heterometallic clusters incorporating nongroup 11 metals are known. We present herein an Au-Pt NHC cluster featuring a crown-shaped [Au8Pt(NHC)8]2+ core, produced in high yield without the need for chromatographic purification. The method was largely independent of the substitution pattern of the NHC backbone; however, bulky wingtip groups were needed for clean conversion to the Au8Pt cluster. Clusters were characterized using single crystal X-ray diffraction, multinuclear nuclear magnetic resonance, electrospray ionization mass spectroscopy, and ultraviolet-visible spectroscopy, and electrochemical features of the cluster are also presented. A detailed analysis of the in-progress reaction mixture by ESI-MS supports the direct involvement of Au-H species as intermediates in cluster formation. These studies further demonstrate that NHC wingtip sterics play a key part in determining the nature of the initial cluster species, providing critical information for the generation of new NHC-stabilized nanoclusters.

Safety and efficacy of intra-erythrocyte dexamethasone sodium phosphate in children with ataxia telangiectasia (ATTeST): a multicentre, randomised, double-blind, placebo-controlled phase 3 trial.

BACKGROUND: Ataxia telangiectasia is a multisystem disorder with progressive neurodegeneration. Corticosteroids can improve neurological functioning in patients with the disorder but adrenal suppression and symptom recurrence on treatment discontinuation has limited their use, prompting the development of novel steroid delivery systems. The aim of the ATTeST study was to evaluate the efficacy and safety of intra-erythrocyte delivery of dexamethasone sodium phosphate compared with placebo in children with ataxia telangiectasia. METHODS: This multicentre, randomised, double-blind, placebo-controlled, phase 3 trial was done at 22 centres in 12 countries (Australia, Belgium, Germany, India, Israel, Italy, Norway, Poland, Spain, Tunisia, the UK, and the USA). Eligible participants were children aged 6 years or older weighing more than 15 kg who met clinical criteria for ataxia telangiectasia but who had preserved autonomous gait. Participants were randomly assigned (1:1:1) to low-dose (approximately 5-10 mg), or high-dose (approximately 14-22 mg) intra-erythrocyte dexamethasone sodium phosphate, or placebo, using an independent interactive web response system, with minimisation for sex and age (6-9 years vs ≥10 years). Intravenous intra-erythrocyte dexamethasone sodium phosphate was administered once a month for 6 months. Participants, employees of the sponsor, investigators, all raters of efficacy endpoints, and central reviewers were masked to treatment assignment and dose allocations. The primary efficacy endpoint was change in the modified International Cooperative Ataxia Rating Scale (mICARS) from baseline to month 6, assessed in the modified intention-to-treat (mITT) population, which included all randomly assigned participants who received at least one dose of study drug and had at least one post-baseline efficacy assessment. This trial is registered with Clinicaltrials.gov (NCT02770807) and is complete. FINDINGS: Between March 2, 2017, and May 13, 2021, 239 children were assessed for eligibility, of whom 176 were randomly assigned. One patient assigned to high-dose intra-erythrocyte dexamethasone sodium phosphate did not initiate treatment. 175 patients received at least one dose of treatment (59 patients received the low dose and 57 received the high dose of intra-erythrocyte dexamethasone sodium phosphate, and 59 received placebo). The mITT population comprised 164 participants (56 children in the low-dose group, 54 children in the high-dose group, and 54 in the placebo group). Compared with the placebo group, no differences were identified with regard to change in mICARS score from baseline to 6 months in the low-dose group (least squares mean difference -1·37 [95% CI -2·932 to 0·190]) or the high-dose group (-1·40 [-2·957 to 0·152]; p=0·0765). Adverse events were reported in 43 (73%) of 59 participants in the low-dose group, 47 (82%) of 57 participants in the high-dose group, and 43 (73%) of 59 participants in the placebo group. Serious adverse events were observed in six (10%) of 59 participants in the low-dose group, seven (12%) of 57 participants in the high-dose group, and seven (12%) of 59 participants in the placebo group. There were no reports of hyperglycaemia, hypertension, hirsutism, or Cushingoid appearance in any of the treatment groups, nor any treatment-related deaths. INTERPRETATION: Although there were no safety concerns, the primary efficacy endpoint was not met, possibly related to delays in treatment reducing the number of participants who received treatment as outlined in the protocol, and potentially different treatment effects according to age. Studies of intra-erythrocyte delivery of dexamethasone sodium phosphate will continue in participants aged 6-9 years, on the basis of findings from subgroup analyses from this trial. FUNDING: EryDel and Quince Therapeutics.

Supramolecular Motion Enables Chondrogenic Bioactivity of a Cyclic Peptide Mimetic of Transforming Growth Factor-ß1.

Transforming growth factor (TGF)-ß1 is a multifunctional protein that is essential in many cellular processes that include fibrosis, inflammation, chondrogenesis, and cartilage repair. In particular, cartilage repair is important to avoid physical disability since this tissue does not have the inherent capacity to regenerate beyond full development. We report here on supramolecular coassemblies of two peptide amphiphile molecules, one containing a TGF-ß1 mimetic peptide, and another which is one of two constitutional isomers lacking bioactivity. Using human articular chondrocytes, we investigated the bioactivity of the supramolecular copolymers of each isomer displaying either the previously reported linear form of the mimetic peptide or a novel cyclic analogue. Based on fluorescence depolarization and 1H NMR spin-lattice relaxation times, we found that coassemblies containing the cyclic compound and the most dynamic isomer exhibited the highest intracellular TGF-ß1 signaling and gene expression of cartilage extracellular matrix components. We conclude that control of supramolecular motion is emerging as an important factor in the binding of synthetic molecules to receptors that can be tuned through chemical structure.

Statistical analysis plan for cluster randomised trial to evaluate a community-level complementary food safety and hygiene and nutrition intervention in Mali: the MaaCiwara study.

BACKGROUND: Diarrheal disease is a significant cause of morbidity and mortality in under-fives in many low- and middle-income countries. Changes in food safety, hygiene practices, and nutrition around the weaning period may reduce the risk of disease and improve infant development. The MaaCiwara study aims to evaluate the effectiveness of a community-based educational intervention designed to improve food safety and hygiene behaviours, as well as child nutrition. This update article describes the statistical analysis plan for the MaaCiwara study in detail. METHODS AND DESIGN: The MaaCiwara study is a parallel group, two-arm, superiority cluster randomised controlled trial with baseline measures, involving 120 clusters of rural and urban communities. These clusters are randomised to either receive the community-based behaviour change intervention or to the control group. The study participants will be mother-child pairs, with children aged between 6 and 36 months. Data collection involves a day of observation and interviews with each participating mother-child pair, conducted at baseline, 4 months, and 15 months post-intervention. The primary analysis aims to estimate the effectiveness of the intervention on changes to complementary food safety and preparation behaviours, food and water contamination, and diarrhoea. The primary outcomes will be analysed generalised linear mixed models, at individual level, accounting for clusters and rural/urban status to estimate the difference in outcomes between the intervention and control groups. Secondary outcomes include maternal autonomy, enteric infection, nutrition, child anthropometry, and development scores. In addition, structural equation analysis will be conducted to examine the causal relationships between the different outcomes. TRIAL REGISTRATION: International Standard Randomised Controlled Trial Number (ISRCTN) register: ISRCTN14390796 . Registered on 13 December 2021.

Identification of the most relevant aspects of spinal muscular atrophy (SMA) with impact on the quality of life of SMA patients and their caregivers: the PROfuture project, a qualitative study.

BACKGROUND: SMA is a hereditary neuromuscular disease that causes progressive muscle weakness and atrophy. Several studies have shown that the burden of SMA is very high at many levels. Functional assessment tools currently used do not completely address the impact of the disease in patients' life. The objective of this qualitative study was to identify aspects of SMA that are relevant to patients and to design items useful for assessment purposes. RESULTS: Five focus group sessions were run during an annual SMA families meeting in Madrid, Spain. Focus groups were composed by parents of SMA type I children, sitter children type II-III, parents of sitter children type II-III, adult patients, and parents of walker children. Two trained facilitators conducted the focus groups using a semi-structured guideline to cover previously agreed topics based on the input of a Scientific and Patient Advisory Committee. The guideline was adapted for the different groups. According to what was communicated by participants, SMA entails a high burden of disease for both patients and their parents. Burden was perceived in physical, psychological, and social areas. Patient's physical domain was the most relevant for participants, especially for parents of non-ambulant children, followed by limitations of motor scales to capture all changes, parents psychological burden, treatment expectations and patient's psychological burden. Ten domains were the main areas identified as impacted by the disease: mobility and independence, fatigue and fatigability, infections and hospital consultations, scoliosis and contractures, vulnerability, pain, feeding, time spent in care, breathing, and sleep and rest. CONCLUSIONS: This study confirms the necessity of evaluating other aspects of the disease that are not assessed in the functional motor scale. Measures of other aspects of the disease, such as pain, fatigue, feeding, should be also considered. A patient-reported outcomes instrument measuring such aspects in a valid and reliable way would be very useful. This study generated a list of new items relevant to be systematically measured in the assessment of the impact of SMA on the patients' everyday life.

Biopolymer-supramolecular polymer hybrids for photocatalytic hydrogen production.

Solar generation of H2 is a promising strategy for dense energy storage. Supramolecular polymers composed of chromophore amphiphile monomers containing perylene monoimide (PMI) have been reported as crystalline light-harvesting assemblies for aqueous H2-evolving catalysts. Gelation of these supramolecular polymers with multivalent ions creates hydrogels with high diffusivity but insufficient mechanical stability and catalyst retention for reusability. We report here on using sodium alginate (SA) biopolymer to both induce supramolecular polymerization of PMI and co-immobilize them with catalysts in a robust hydrogel with high diffusivity that can also be 3D-printed. Faster mass transfer was achieved by controlling the material macrostructure by reducing gel diameter and microstructure by reducing biopolymer loading. Optimized gels produce H2 at rates rivaling solution-based PMI and generate H2 for up to 6 days. The PMI assemblies in the SA matrix create a percolation network capable of bulk-electron transfer under illumination. These PMI-SA materials were then 3D-printed on conductive substrates to create 3D hydrogel photoelectrodes with optimized porosity. The design of these versatile hybrid materials was bioinspired by the soft matter environment of natural photosynthetic systems and opens the opportunity to carry out light-to-fuel conversion within soft matter with arbitrary shapes and particular local environments.

Self-Sorting vs Coassembly in Peptide Amphiphile Supramolecular Nanostructures.

The functionality of supramolecular nanostructures can be expanded if systems containing multiple components are designed to either self-sort or mix into coassemblies. This is critical to gain the ability to craft self-assembling materials that integrate functions, and our understanding of this process is in its early stages. In this work, we have utilized three different peptide amphiphiles with the capacity to form ß-sheets within supramolecular nanostructures and found binary systems that self-sort and others that form coassemblies. This was measured using atomic force microscopy to reveal the nanoscale morphology of assemblies and confocal laser scanning microscopy to determine the distribution of fluorescently labeled monomers. We discovered that PA assemblies with opposite supramolecular chirality self-sorted into chemically distinct nanostructures. In contrast, the PA molecules that formed a mixture of right-handed, left-handed, and flat nanostructures on their own were able to coassemble with the other PA molecules. We attribute this phenomenon to the energy barrier associated with changing the handedness of a ß-sheet twist in a coassembly of two different PA molecules. This observation could be useful for designing biomolecular nanostructures with dual bioactivity or interpenetrating networks of PA supramolecular assemblies.

Hybrid Bonding Bottlebrush Polymers Grafted from a Supramolecular Polymer Backbone.

Bottlebrush polymers, macromolecules consisting of dense polymer side chains grafted from a central polymer backbone, have unique properties resulting from this well-defined molecular architecture. With the advent of controlled radical polymerization techniques, access to these architectures has become more readily available. However, synthetic challenges remain, including the need for intermediate purification, the use of toxic solvents, and challenges with achieving long bottlebrush architectures due to backbone entanglements. Herein, we report hybrid bonding bottlebrush polymers (systems integrating covalent and noncovalent bonding of structural units) consisting of poly(sodium 4-styrenesulfonate) (p(NaSS)) brushes grafted from a peptide amphiphile (PA) supramolecular polymer backbone. This was achieved using photoinitiated electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization in water. The structure of the hybrid bonding bottlebrush architecture was characterized using cryogenic transmission electron microscopy, and its properties were probed using rheological measurements. We observed that hybrid bonding bottlebrush polymers were able to organize into block architectures containing domains with high brush grafting density and others with no observable brushes. This finding is possibly a result of dynamic behavior unique to supramolecular polymer backbones, enabling molecular exchange or translational diffusion of monomers along the length of the assemblies. The hybrid bottlebrush polymers exhibited higher solution viscosity at moderate shear, protected supramolecular polymer backbones from disassembly at high shear, and supported self-healing capabilities, depending on grafting densities. Our results demonstrate an opportunity for novel properties in easily synthesized bottlebrush polymer architectures built with supramolecular polymers that might be useful in biomedical applications or for aqueous lubrication.

Lattice Symmetry-Guided Charge Transport in 2D Supramolecular Polymers Promotes Triplet Formation.

Singlet-to-triplet intersystem crossing (ISC) in organic molecules is intimately connected with their geometries: by modifying the molecular shape, symmetry selection rules pertaining to spin-orbit coupling can be partially relieved, leading to extra matrix elements for increased ISC. As an analog to this molecular design concept, the study finds that the lattice symmetry of supramolecular polymers also defines their triplet formation efficiencies. A supramolecular polymer self-assembled from weakly interacting molecules is considered. Its 2D oblique unit cell effectively renders it as a coplanar array of 1D molecular columns weakly bound to each other. Using momentum-resolved photoluminescence imaging in combination with Monte Carlo simulations, the study found that photogenerated charge carriers in the supramolecular polymer predominantly recombine as spin-uncorrelated carrier pairs through inter-column charge transfer states. This lattice-defined recombination pathway leads to a substantial triplet formation efficiency (≈60%) in the supramolecular polymer. These findings suggest that lattice symmetry of micro-/macroscopic structures relying on intermolecular interactions can be strategized for controlled triplet formation.

A randomised Trial of Autologous Blood products, leukocyte and platelet-rich fibrin (L-PRF), to promote ulcer healing in LEprosy: The TABLE trial.

INTRODUCTION: Autologous blood products like Platelet Rich Plasma (PRP) and Leukocyte and Platelets Rich Fibrin (L-PRF) have been used for many years across many types of skin ulcers. However, the effectiveness of autologous blood products on wound healing is not well established. METHODS: We evaluated the 'second generation' autologous product- Leukocyte and Platelet- Rich Fibrin (L-PRF). Our trial was undertaken on patients suffering from neuropathic leprosy ulcers at the Anandaban hospital which serves the entire country of Nepal. We conducted a 1:1 (n = 130) individually randomised trial of L-PRF (intervention) vs. normal saline dressing (control) to compare rate of healing and time to complete healing. Rate of healing was estimated using blind assessments of ulcer areas based on three different measurement methods. Time to complete healing was measured by the local unblinded clinicians and by blind assessment of ulcer images. RESULTS: The point estimates for both outcomes were favourable to L-PRF but the effect sizes were small. Unadjusted mean differences (intervention vs control) in mean daily healing rates (cm2) were respectively 0.012 (95% confidence interval 0.001 to 0.023, p = 0.027); 0.016 (0.004 to 0.027, p = 0.008) and 0.005 (-0.005 to 0.016, p = 0.313) across the three measurement methods. Time to complete healing at 42 days yielded Hazard Ratios (unadjusted) of 1.3 (0.8 to 2.1, p = 0.300) assessed by unblinded local clinicians and 1.2 (0.7 to 2.0, p = 0.462) on blind assessment. CONCLUSION: Any benefit from L-PRF appears insufficient to justify routine use in care of neuropathic ulcers in leprosy. TRIAL REGISTRATION: ISRCTN14933421. Date of trial registration: 16 June 2020.

The association of alcohol use disorder with revision rates and post-operative complications in total shoulder arthroplasty.

Background: Alcohol use disorder (AUD) is the most prevalent substance use disorder in the United States. However, the current literature on AUD as a preoperative risk factor for Total Shoulder Arthroplasty (TSA) outcomes is limited. The purpose of this study was to identify the association of AUD with revision rates and 90-day postoperative complications in TSA. Methods: A retrospective study was conducted using the PearlDiver database. Patients diagnosed with AUD were identified. Patients in remission or with underlying cirrhosis were excluded. Outcomes included 2-year revision, 90-day readmission, 90-day emergency, and 90-day post-operative medical complications. Analysis was performed with univariate chi-squared tests followed by multivariable logistic regression. Results: A total of 59,261 patients who underwent TSA for osteoarthritis were identified, with 1522 patients having a diagnosis of AUD. Multivariable logistic regression showed that patients with AUD were more likely to undergo 2-year all-cause revision (OR = 1.49, p = 0.007), 2-year aseptic revision (OR = 1.47, p = 0.014), 90-day hospital readmission (OR = 1.57, p = 0.015), and 90-day transient mental disorder (OR = 2.13, p = 0.026). Conclusions: AUD is associated with increased rates of 2-year revision surgery, as well as 90-day readmission and 90-day transient mental disorder following primary TSA for osteoarthritis. These findings may assist orthopedic surgeons in counseling patients with AUD during the pre-operative course.

Overdose Risk and Brain Injury (Traumatic Brain Injury/Acquired Brain Injury), A Commentary.

OBJECTIVE: This commentary seeks to evaluate existing knowledge about the relationship between brain injury (BI) and overdose (OD), to unify distant bodies of literature, and to enhance prevention and treatment for opioid OD among individuals with BI. BACKGROUND: There is a hidden epidemic of undiagnosed BI in the United States. Due to lack of screening, the vast majority of BI sufferers do not know they have a BI. Not only are those with BI at elevated risk for opioid use, misuse, and opioid use disorder, but also they are at elevated risk for OD. Conversely, those with OUD and those who experienced an OD, are more likely to sustain BI. Key Findings/Conclusions: The existing literature suggests that primary strategies to reduce ABI (Acquired Brain Injury)/TBI (Traumatic Brain Injury) harms involve addressing: screening, stigma, racial disparities, and popular misconceptions about OD. The association between TBI and OD is an underexamined public health issue, exacerbated by the bidirectional nature of the relationship. Not only is TBI a risk factor for opioid OD; opioid OD was also found to be a major cause of ABI, which can have lifelong effects similar to Alzheimer's disease. Screening tools for BI were underutilized and inconsistently implemented across reviewed studies. Enhanced screening population wide is a promising intervention, complemented with expanded treatment and research. Black individuals face worse outcomes in BI and treatment outcomes. Anti-racist strategies must fight inequity while addressing social and structural drivers of overdose and BI within the opioid and opioid overdose crises.

Impact of Smokeless Tobacco on Cardiovascular Disease Risk in a Nigerian Metropolitan City.

The use of smokeless tobacco products (STP) as a substitute for tobacco smoking is driving increasing consumption of these products especially in developing countries. The study sought to make comparison of cardiovascular risk profile between chronic STP users and suitably matched tobacco-naïve controls. This is a preliminary report from the cross sectional part of a two-arm prospective study of Smokeless Tobacco Products Composition and Exposure Outcome in Enugu metropolis, Nigeria. Consecutively recruited current Smokeless tobacco users, who had no history of cigarette smoking, aged 18 years and above, residing in selected communities in Enugu metropolis, Nigeria were recruited for the study from October 2022 to July 2023. Age and sex matched non-tobacco users from same localities as the study subjects served as controls. Written informed consent to participate in the study was obtained from all study participants. All participants were screened by the investigators, using the study case report forms, to obtain data on medical history, demographic, clinical, laboratory, and electrocardiographic evaluation. Data from 54 STP-users and 54 non-STP-users (mean age 56.58 ± 8.15 years) were analyzed. Anthropometric parameters were similar in both groups. Smokeless tobacco users had higher erect and supine blood pressure indices as well as greater postural drop in systolic blood pressure. The occurrence of diabetes mellitus (20.37% versus 5.56%) and hypertension (25.93%; 11.11%) was significantly higher in the STP-users than in the non-user population, (p = 0.02192 and 0.04751 respectively). Electrocardiographic evaluation showed significantly increased QTc and dispersions of P-wave, QRS and QT intervals as well as reduced PR interval in STP users. Electrocardiographic abnormalities observed in STP users include left ventricular hypertrophy, left atrial enlargement, ST-segment elevation, short PR interval and long QTc. Use of smokeless tobacco products is associated with increased risk burden of diabetes mellitus and hypertensive heart disease. Electrocardiographic findings linked to STP-use in this study are features consistent with arrhythmia, ventricular repolarization abnormality, myocardial hypertrophy and ischaemia, suggesting that smokeless tobacco products are not safe substitutes for tobacco smoking.

Deconstructing cancer with precision genome editing.

Recent advances in genome editing technologies are allowing investigators to engineer and study cancer-associated mutations in their endogenous genetic contexts with high precision and efficiency. Of these, base editing and prime editing are quickly becoming gold-standards in the field due to their versatility and scalability. Here, we review the merits and limitations of these precision genome editing technologies, their application to modern cancer research, and speculate how these could be integrated to address future directions in the field.

Enhanced Hydrogen Bonding by Urea Functionalization Tunes the Stability and Biological Properties of Peptide Amphiphiles.

Self-assembled nanostructures such as those formed by peptide amphiphiles (PAs) are of great interest in biological and pharmacological applications. Herein, a simple and widely applicable chemical modification, a urea motif, was included in the PA's molecular structure to stabilize the nanostructures by virtue of intermolecular hydrogen bonds. Since the amino acid residue nearest to the lipid tail is the most relevant for stability, we decided to include the urea modification at that position. We prepared four groups of molecules (13 PAs in all), with varying levels of intermolecular cohesion, using amino acids with distinct ß-sheet promoting potential and/or containing hydrophobic tails of distinct lengths. Each subset contained one urea-modified PA and nonmodified PAs, all with the same peptide sequence. The varied responses of these PAs to variations in pH, temperature, counterions, and biologically related proteins were examined using microscopic, X-ray, spectrometric techniques, and molecular simulations. We found that the urea group contributes to the stabilization of the morphology and internal arrangement of the assemblies against environmental stimuli for all peptide sequences. In addition, microbiological and biological studies were performed with the cationic PAs. These assays reveal that the addition of urea linkages affects the PA-cell membrane interaction, showing the potential to increase the selectivity toward bacteria. Our data indicate that the urea motif can be used to tune the stability of a wide range of PA nanostructures, allowing flexibility on the biomaterial's design and opening a myriad of options for clinical therapies.