Anatomical characteristics of superior and subsuperior segment in right lower lobe based on three-dimensional reconstruction.

OBJECTIVE: Segmentectomy has been widely performed in clinical practice, which required a comprehensive understanding of anatomical structure. In right lower lobe, studies of superior segment (S6) were relatively small-sized. And only one study focusing on subsuperior segment (S∗) was published, which showed different results with previous ones. As the close relationship between S6 and S∗, variation types and their prevalence rate were reported, aiming to providing larger-size study of S6 and showing new evidence on anatomical structure of S∗. METHODS: 800 CT imaging data were collected from patients in our hospital. Three-dimensional reconstruction was performed after quality check. All images were screened according to the definition of corresponding segment and anatomical variations were analyzed. RESULTS: The proportion of S6 variation types in the largest scale (718 patients) was reported with no significant difference compared to previous studies and newly classified subtypes of two-stem V6. The prevalence rate for S∗ in right lower lobe reached 28.3 % (203/718) with similar proportion of three types. Variation types and origins of pulmonary artery were analyzed in detail, finding two-stem A∗ only be observed in type III B∗. CONCLUSIONS: Through this study, the variation types and incidence rate of S6 were confirmed, and a different result of S∗ has been provided as well. The feasibility of the current classification standards and proposed new subclassifications were verified. The results would be a supplement to lung segmental anatomy and could advance researches in the future.

Risk analysis for subsequent fracture of osteoporotic fractures in Chinese women over age 60: a nationwide cross-sectional study.

Prevention of subsequent fracture is a major public health challenge in the field of osteoporosis prevention and treatment, and older women are at high risk for osteoporotic fractures. This study aimed to examine factors associated with subsequent fracture in older Chinese women with osteoporosis. We collected data on 9212 older female patients with osteoporotic fractures from 580 medical institutions in 31 provinces of China. Higher odds of subsequent fractures were associated with age of 70-79 years (OR 1.218, 95% CI 1.049-1.414), age ≥ 80 (OR 1.455, 95% CI 1.222-1.732), index fracture site was vertebrae (OR 1.472, 95% CI 1.194-1.815) and hip (OR 1.286, 95% CI 1.041-1.590), index fracture caused by fall (OR 1.822, 95% CI 1.281-2.591), strain (OR 1.587, 95% CI 1.178-2.139), no inducement (OR 1.541, 95% CI 1.043-2.277), and assessed as high risk of fracture (OR 1.865, 95% CI 1.439-2.416), BMD T-score ≤ -2.5 (OR 1.725, 95% CI 1.440-2.067), history of surgery (OR 3.941, 95% CI 3.475-4.471) and trauma (OR 8.075, 95% CI 6.941-9.395). Low risk of fall (OR 0.681, 95% CI 0.513-0.904), use of anti-osteoporosis medication (AOM, OR 0.801, 95% CI 0.693-0.926), and women who had received fall prevention health education (OR 0.583, 95% CI 0.465-0.730) associated with lower risk. The areas under the curve of the prediction model was 0.818. The sensitivity was 67.0% and the specificity was 82.0%. The prediction model showed a good ability to predict the risk of subsequent fracture in older women with osteoporotic fractures and are suitable for early self-measurement which may benefit post-fracture management.

Design and development of an intelligent wearing system for adolescent spinal orthotics.

Adolescent idiopathic scoliosis is the deformity of the human spine in three-dimensional space. It is a disease with a long course and difficult to recover in a short time. Currently, spinal orthotic braces are an effective non-surgical treatment for this condition. However, existing spinal orthotic braces are still deficient. For example, existing spinal orthotics braces have no way of knowing how correct, effective, and comfortable a patient is wearing the orthotics. Based on distributed pressure monitoring technology, this paper conducts pressure acquisition and compensation research on spinal orthotics used by adolescent patients. After analyzing the principles of orthopedics and selecting monitoring points, this paper selects appropriate sensors and calibrates them. An intelligent wearable system for adolescent spinal orthotics was developed based on these findings. The experimental results show that the system can effectively monitor the process of patients wearing spinal orthotic braces. In addition, the system can compensate and visualize the pressure in real-time, so that doctors and patients can know the process and make judgments and adjustments.

Vacuum bell therapy for pectus excavatum: a retrospective study.

BACKGROUND: Pectus excavatum, the most common chest wall deformity, is frequently treated with Nuss procedure. Here we will describe non-invasive procedure and analyze the variables associated vacuum bell therapy for patients with pectus excavatum. METHODS: Retrospective case-control study in a single center between July 2018 and February 2022, including patients with pectus excavatum treated with vacuum bell. Follow-up was continued to September 2022. The Haller index and Correction index was calculated before and after treatment to analysis the effectiveness of vacuum bell therapy. RESULTS: There were 98 patients enrolled in the treatment group, with 72 available for analysis, and the follow-up period ranged from 1.1 to 4.4 years (mean 3.3 years). When analyzing with the Haller Index, 18 patients (25.0%) showed excellent correction, 13 patients (18.1%) achieved good correction, and 4 patients (5.6%) had fair correction. The remaining patients had a poor outcome. Characteristics predicting a non-poor prognosis included initial age ≤ 11 years (OR = 3.94, p = 0.013) and patients with use over 24 consecutive months (OR = 3.95, p = 0.013). A total of 9 patients (12.5%) achieved a CI reduction below 10. Patients who started vacuum bell therapy at age > 11 had significantly less change compared to those who started at age ≤ 11 (P < 0.05). Complications included chest pain (5.6%), swollen skin (6.9%), chest tightness (1.4%) and erythema (15.3%). CONCLUSIONS: A certain percentage of patients with pectus excavatum can achieve excellent correction when treated with pectus excavatum therapy. Variables predicting better outcome including initial age ≤ 11 years both in HI and CI and vacuum bell use over 24 consecutive months in HI. In summary, pectus excavatum is an emerging non-invasive therapy for pectus excavatum and will be widely performed in a certain group of patients.

Succession and environmental response of sediment bacterial communities in the Liao River Estuary at the centenary scale.

Microbial community succession in turbulent estuarine environments is key to the understanding of microbial community development in estuaries. Centennial-scale sediment core samples collected from the Liao River Estuary (LRE) channel bar and side beaches were studied for geochemistry and 16S rRNA gene-based bacterial analyses. The results showed that bacterial community composition significantly differed between the sediments of the two sides of the channel bar, with Campilobacterota and Bacteroidota being dominant bacterial phyla in the tributary (T1, T2) and mainstream (MS1, MS2) sediment, respectively. Co-occurrence network of the bacterial community at the genus level showed more centralized and compacted topological features in tributary with weaker hydrodynamic, and the keystone taxas were Halioglobus, Luteolibacter, and Lutibacter in the bacterial community. The bacterial network structure had more edges and larger average degree in LRE sediments from the stage of the year 2016-2009 and the stage before 1939, which was possibly related to hydrodynamic conditions and nutrients. Stochastic processes (dispersal limitation) were the key factors driving bacterial community assembly in the LRE sediments. In addition, total organic carbon (TOC), total sulfur (TS), and grain size were the main deterministic factors affecting the change of bacterial community structure. Relative microbial abundance has the potential to indicate geologically historical environmental changes. This study provided a new perspective to reveal the succession and response of bacterial communities under frequent fluctuation environments.

An imidazole-derived polarity sensitive probe for lipid droplet target and in vivo tumor imaging.

Accurate differentiation of tumor cells from normal cells is a fundamental and critical challenge for the early diagnosis of cancer. The intrinsic low-polarity and increased numbers of lipid droplets can be utilized as potential biomarkers for tumor cells. Therefore, we synthesized and screened the polar fluorescent probe (PI-CHO), which exhibiting notable fluorescence color change and spectral shift in solvents of different polarities. PI-CHO has a high sensitivity to polarity changes in the linear range of ET(30) = 37.4-63.1, with a fluorescence enhancement of more than 474-folds. Intracellular imaging experiments showed that PI-CHO has low cytotoxicity, excellent lipid droplet-targeted performance and discernibility between tumor and normal cells. Ex vivo imaging of the tumors and major organs demonstrated the great reliability and sensitive responsiveness of PI-CHO towards tumors. Moreover, the proposed probe was successfully applied to detect tumors in living mice, exhibiting the potential to become a powerful tool in early cancer diagnosis.

Single-Cell Analysis Reveals Spatial Heterogeneity of Immune Cells in Lung Adenocarcinoma.

The impacts of the tumor microenvironment (TME) on tumor evolvability remain unclear. A challenge for nearly all cancer types is spatial heterogeneity, providing substrates for the emergence and evolvability of drug resistance and leading to unfavorable prognosis. Understanding TME heterogeneity among different tumor sites would provide deeper insights into personalized therapy. We found 9,992 cell profiles of the TME in human lung adenocarcinoma (LUAD) samples at a single-cell resolution. By comparing different tumor sites, we discovered high TME heterogeneity. Single-sample gene set enrichment analysis (ssGSEA) was utilized to explore functional differences between cell subpopulations and between the core, middle and edge of tumors. We identified 8 main cell types and 27 cell subtypes of T cells, B cells, fibroblasts and myeloid cells. We revealed CD4+ naive T cells in the tumor core that express high levels of immune checkpoint molecules and have a higher activity of immune-exhaustion signaling. CD8+ T cell subpopulations in the tumor core correlate with the upregulated activity of transforming growth factor-ß (TGF-ß) and fibroblast growth factor receptor (FGFR) signaling and downregulated T cell activity. B cell subtypes in the tumor core downregulate cytokine production. In this study, we revealed that there was immunological heterogeneity in the TME of patients with LUAD that have different ratios of immune cells and stromal cells, different functions, and various degrees of activation of immune-related pathways in different tumor parts. Therefore, clarifying the spatial heterogeneity of the tumor in the immune microenvironment can help clinicians design personalized treatments.

Optomechanical integrated optimization of a lightweight mirror for space cameras.

In order to improve the optical quality and lightweight ratio of a mirror, optomechanical analysis and optimization for the primary mirror of a space camera are carried out. The mirror surface performance under multiple load conditions is considered, including static gravity and uniform temperature rise load, as well as nonuniform temperature distribution loads. Sensitivities of the surface performance to the size parameters of the mirror are analyzed. The numerical simulations show that the size parameters obviously affect the performance and which parameters are key. The computed surface performance is analyzed with the help of ray-tracing software, and the contribution of size parameters to system optical performance is further evaluated. A size parameter optimization model is established to optimize the optical quality of the mirror. Finally, engineering analysis and dynamic tests are carried out. The results show that mechanical properties of the mirror are excellent, and the relative error of finite element analysis and dynamic test is within 10%. This verifies the accuracy of the model and the effectiveness of the optimization method.