RESUMO
Revealing the deformation mechanism of brittle materials under sharp contact loading (indentation) is important for their applications since this knowledge is crucial for identifying the origin of flaw and scratch formation on their surfaces. As a newly emerged glass family, metal-organic framework (MOF) glasses have not been studied concerning the mechanism of their indentation-induced deformation. Here, we explore this mechanism for ZIF-62 glass (a typical MOF glass system). The fractions of densification and shear flow during indentation were determined by atomic force microscopy, while the elastic deformation was measured via nanoindentation. The results show that ZIF-62 glass deforms primarily through densification and elastic deformation under the sharp contact loading. Significant pile-ups around indents were not observed, indicating that no or limited shear flow occurs in the glass during indentation. This behavior could be attributed to three structural factors, namely, high free volume, easily densified glass structure, and limited translational mobility of structural units.
RESUMO
Understanding of the fracture mechanism of metal-organic framework glasses remains limited. Using reactive molecular dynamics simulations, we here find that three zeolitic imidazolate framework glasses exhibit pronounced nanoductility upon fracture. This fracture behavior is confirmed by fracture toughness predictions. The results indicate that a model based on a purely brittle fracture significantly underestimates the simulated fracture toughness. We ascribe the nanoductility to a Zn-N bond switching mechanism, which is found to be more pronounced for smaller organic linkers. Thus, this study provides insights into the fracture mechanism of the low-toughness, yet nanoductile metal-organic framework glasses.
RESUMO
Humans primarily interact with information technology through glass touch screens, and the world would indeed be unrecognizable without glass. However, the low toughness of oxide glasses continues to be their Achilles heel, limiting both future applications and the possibility to make thinner, more environmentally friendly glasses. Here, we show that with proper control of plasticity mechanisms, record-high values of fracture toughness for transparent bulk oxide glasses can be achieved. Through proper combination of gas-mediated permanent densification and rational composition design, we increase the glasses' propensity for plastic deformation. Specifically, we demonstrate a fracture toughness of an aluminoborate glass (1.4 MPa m0.5) that is twice as high as that of commercial glasses for mobile devices. Atomistic simulations reveal that the densification of the adaptive aluminoborate network increases coordination number changes and bond swapping, ultimately enhancing plasticity and toughness upon fracture. Our findings thus provide general insights into the intrinsic toughening mechanisms of oxide glasses.
RESUMO
Metal-organic framework glasses feature unique thermal, structural, and chemical properties compared to traditional metallic, organic, and oxide glasses. So far, there is a lack of knowledge of their mechanical properties, especially toughness and strength, owing to the challenge in preparing large bulk glass samples for mechanical testing. However, a recently developed melting method enables fabrication of large bulk glass samples (>25 mm3) from zeolitic imidazolate frameworks. Here, fracture toughness (KIc) of a representative glass, namely ZIF-62 glass (Zn(C3H3N2)1.75(C7H5N2)0.25), is measured using single-edge precracked beam method and simulated using reactive molecular dynamics. KIc is determined to be ~0.1 MPa m0.5, which is even lower than that of brittle oxide glasses due to the preferential breakage of the weak coordinative bonds (Zn-N). The glass is found to exhibit an anomalous brittle-to-ductile transition behavior, considering its low fracture surface energy despite similar Poisson's ratio to that of many ductile metallic and organic glasses.
RESUMO
Poisson's ratio (ν) defines a material's propensity to laterally expand upon compression, or laterally shrink upon tension for non-auxetic materials. This fundamental metric has traditionally, in some fields, been assumed to be a material-independent constant, but it is clear that it varies with composition across glasses, ceramics, metals, and polymers. The intrinsically elastic metric has also been suggested to control a range of properties, even beyond the linear-elastic regime. Notably, metallic glasses show a striking brittle-to-ductile (BTD) transition for ν-values above ~0.32. The BTD transition has also been suggested to be valid for oxide glasses, but, unfortunately, direct prediction of Poisson's ratio from chemical composition remains challenging. With the long-term goal to discover such high-ν oxide glasses, we here revisit whether previously proposed relationships between Poisson's ratio and liquid fragility (m) and atomic packing density (Cg) hold for oxide glasses, since this would enable m and Cg to be used as surrogates for ν. To do so, we have performed an extensive literature review and synthesized new oxide glasses within the zinc borate and aluminoborate families that are found to exhibit high Poisson's ratio values up to ~0.34. We are not able to unequivocally confirm the universality of the Novikov-Sokolov correlation between ν and m and that between ν and Cg for oxide glass-formers, nor for the organic, ionic, chalcogenide, halogenide, or metallic glasses. Despite significant scatter, we do, however, observe an overall increase in ν with increasing m and Cg, but it is clear that additional structural details besides m or Cg are needed to predict and understand the composition dependence of Poisson's ratio. Finally, we also infer from literature data that, in addition to high ν, high Young's modulus is also needed to obtain glasses with high fracture toughness.