Bacterial attachment on sub-nanometrically smooth titanium substrata.

Despite the volume of work that has been conducted on the topic, the role of surface topography in mediating bacterial cell adhesion is not well understood. The primary reason for this lack of understanding is the relatively limited extent of topographical characterisation employed in many studies. In the present study, the topographies of three sub-nanometrically smooth titanium (Ti) surfaces were comprehensively characterised, using nine individual parameters that together describe the height, shape and distribution of their surface features. This topographical analysis was then correlated with the adhesion behaviour of the pathogenic bacteria Staphylococcus aureus and Pseudomonas aeruginosa, in an effort to understand the role played by each aspect of surface architecture in influencing bacterial attachment. While P. aeruginosa was largely unable to adhere to any of the three sub-nanometrically smooth Ti surfaces, the extent of S. aureus cell attachment was found to be greater on surfaces with higher average, RMS and maximum roughness and higher surface areas. The cells also attached in greater numbers to surfaces that had shorter autocorrelation lengths and skewness values that approached zero, indicating a preference for less ordered surfaces with peak heights and valley depths evenly distributed around the mean plane. Across the sub-nanometrically smooth range of surfaces tested, it was shown that S. aureus more easily attached to surfaces with larger features that were evenly distributed between peaks and valleys, with higher levels of randomness. This study demonstrated that the traditionally employed amplitudinal roughness parameters are not the only determinants of bacterial adhesion, and that spatial parameters can also be used to predict the extent of attachment.

Air-directed attachment of coccoid bacteria to the surface of superhydrophobic lotus-like titanium.

Superhydrophobic titanium surfaces fabricated by femtosecond laser ablation to mimic the structure of lotus leaves were assessed for their ability to retain coccoid bacteria. Staphylococcus aureus CIP 65.8T, S. aureus ATCC 25923, S. epidermidis ATCC 14990T and Planococcus maritimus KMM 3738 were retained by the surface, to varying degrees. However, each strain was found to preferentially attach to the crevices located between the microscale surface features. The upper regions of the microscale features remained essentially cell-free. It was hypothesised that air entrapped by the topographical features inhibited contact between the cells and the titanium substratum. Synchrotron SAXS revealed that even after immersion for 50 min, nano-sized air bubbles covered 45% of the titanium surface. After 1 h the number of cells of S. aureus CIP 65.8T attached to the lotus-like titanium increased to 1.27×10(5) mm(-2), coinciding with the replacement of trapped air by the incubation medium.

Nature inspired structured surfaces for biomedical applications.

Nature has created an array of superhydrophobic surfaces that possess water-repellent, self-cleaning and anti-icing properties. These surfaces have a number of potential applications in the biomedical industry, as they have the potential to control protein adsorption and cell adhesion. Natural superhydrophobic surfaces are typically composed of materials with a low intrinsic surface free-energy (e.g the cuticular waxes of lotus leaves and insect wings) with a hierarchical structural configuration. This hierarchical surface topography acts to decrease the contact area of water droplets in contact with the surface, thereby increasing the extent of the air/water interface, resulting in water contact angles greater than 150º. In order to employ these surfaces in biotechnological applications, fabrication techniques must be developed so that these multi-scale surface roughness characteristics can be reproduced. Additionally, these fabrication techniques must also be able to be applied to the material required for the intended application. An overview of some of the superhydrophobic surfaces that exist in nature is presented, together with an explanation of the theories of their wettability. Also included is a description of some of the biomedical applications of superhydrophobic surfaces and fabrication techniques that can be used to mimic superhydrophobic surfaces found in nature.

Amino acid/spermine conjugates: polyamine amides as potent spermidine uptake inhibitors.

In this paper we describe the synthesis and characterization of a series of simple spermine/amino acid conjugates, some of which potently inhibit the uptake of spermidine into MDA-MB-231 breast cancer cells. The presence of an amide in the functionalized polyamine appeared to add to the affinity for the polyamine transporter. The extensive biological characterization of an especially potent analogue from this series, the Lys-Spm conjugate (31), showed this molecule will be an extremely useful tool for use in polyamine research. It was shown that the use of 31 in combination with DFMO led to a cytostatic growth inhibition of a variety of cancer cells, even when used in the presence of an extracellular source of transportable spermidine. It was furthermore shown that this combination effectively reduced the cellular levels of putrescine and spermidine while not affecting the levels of spermine. These facts together with the nontoxic nature of 31 make it a novel lead for further anticancer development.

Novel lysine-spermine conjugate inhibits polyamine transport and inhibits cell growth when given with DFMO.

Polyamines are ubiquitous molecules with multiple intracellular functions. Cells tightly regulate their levels through feedback mechanisms affecting synthesis, intracellular conversion, and transport. Because polyamines have an important role in regulating cell growth, they are a target for cancer therapeutic development. However, to effectively inhibit cell growth through polyamine depletion one needs to inhibit both polyamine synthesis and import. Although the mammalian polyamine transporter has not been cloned, we have identified ORI 1202, an N(1)-spermine-L-lysinyl amide, as an effective polyamine transport inhibitor. ORI 1202 prevents the cellular accumulation of [(3)H]spermidine over a 20-h test period. ORI 1202 (30-100 microM) effectively inhibits cell growth when used in conjunction with the polyamine synthesis inhibitor alpha-difluoromethylornithine (DFMO; > or =230 microM). Human breast, prostate, and bladder carcinoma cell lines and melanoma cell lines show ORI 1202 EC(50) values in the low micromolar range when tested in conjunction with DFMO. This cytostatic effect correlates with a reduction in the intracellular levels of putrescine and spermidine. When ORI 1202 (45 mg/kg, i.p., tidx5) and DFMO (1% in drinking water) were delivered over 14 days, MDA-MB-231 breast tumor xenografts in nude mice showed 50% growth inhibition. Polyamine depletion therapy provides a cytostatic therapy that could be useful against cancer and other diseases resulting from uncontrolled cell growth.

1-(N-alkylamino)-11-(N-ethylamino)-4,8-diazaundecanes: simple synthetic polyamine analogues that differentially alter tubulin polymerization.

Polyamine analogues such as bis(ethyl)norspermine and N1-(cyclopropylmethyl)-N11-ethyl-4,8-diazaundecane (CPENSpm) act as potent modulators of cellular polyamine metabolism in vitro and possess impressive antitumor activity against a number of cell lines. Some of these polyamine analogues appear to produce their cell-type-specific cytotoxic activity through the superinduction of spermidine/spermine N1-acetyltransferase (SSAT). However, there are several analogues (e.g., N1-(cycloheptylmethyl)-N11-ethyl-4, 8-diazaundecane (CHENSpm)) which are effective cytotoxic agents but do not superinduce SSAT. We have previously demonstrated that CPENSpm and CHENSpm both initiate the cell death program, although by different mechanisms, and that CHENSpm (but not CPENSpm) induces a G2/M cell cycle arrest. We now report that one potential mechanism by which some polyamine analogues can retard growth and ultimately produce cytotoxicity is through interference with normal tubulin polymerization. In these studies, we compare the effects of the polyamine analogues CHENSpm, CPENSpm, and (S)-N1-(2-methyl-1-butyl)-N11-ethyl-4,8-diazaundecane (IPENSpm) on in vitro tubulin polymerization. These spermine analogues behave very differently from spermine and from each other in terms of tubulin polymerization rate, equilibrium levels, and time of polymerization initiation. These results demonstrate that structurally similar polyamine analogues with potent antitumor effects can produce significantly different cellular effects. The discovery of polyamine analogues that can alter tubulin polymerization provides a series of promising lead compounds that may have a similar spectrum of activity to more difficult to synthesize compounds typified by paclitaxel.

Cobalamin-dependent methionine synthase and serine hydroxymethyltransferase: targets for chemotherapeutic intervention?

Chemotherapeutic drugs targeted at folate-dependent reactions have typically been directed at a limited number of target enzymes: dihydrofolate reductase, thymidylate synthase, and GAR and AICAR transformylase. This review discusses two other potential targets for chemotherapeutic inhibition: cobalamin-dependent methionine synthase and serine hydroxymethyltransferase. Brief reviews of the catalytic properties of these two enzymes are presented, and possible strategies for chemotherapeutic intervention are discussed.

4-Chlorothreonine is substrate, mechanistic probe, and mechanism-based inactivator of serine hydroxymethyltransferase.

Serine hydroxymethyltransferase catalyzes the cleavage of a variety of beta-hydroxy-L-amino acids to form glycine and aldehyde products. 4-chloro-L-threonine has been synthesized and shown to be both a substrate and a mechanism-based inactivator of serine hydroxymethyltransferase. kcat values for the formation of glycine in the absence of tetrahydrofolate were determined for 4-chloro-L-threonine and other beta-hydroxyamino acid substrates; an inverse relationship between the rate of cleavage of the amino acid and the electrophilicity of the product aldehyde was demonstrated. 4-Chloro-L-threonine inactivates serine hydroxymethyltransferase in a time- and concentration-dependent manner and exhibits saturation of the rate of inactivation at high concentrations. Our evidence suggests that 4-chlorothreonine undergoes aldol cleavage, and generation of chloroacetaldehyde at the active site of the enzyme results in inactivation. Serine or glycine protect the enzyme against inactivation by chlorothreonine, while tetrahydrofolate does not. The enzyme is also protected from inactivation by 2-mercaptoethanol or by alcohol dehydrogenase and NADH. These studies suggest that halothreonine derivatives that generate electrophilic aldehyde products will be effective inhibitors of serine hydroxymethyltransferase and might be potentially useful chemotherapeutic agents.

Purification and characterization of the M.RsrI DNA methyltransferase from Escherichia coli.

The gene (rsrIM) encoding the RsrI DNA methyltransferase (M.RsrI) from Rhodobacter sphaeroides was cloned and expressed in Escherichia coli. Under the control of a bacteriophage T7 promoter, 2% of the total protein in a crude extract was M.RsrI. This level of expression represents an approximately 50-fold increase over that present in the natural host. Chromatography using DNA cellulose and the S-adenosylmethionine analogue, sinefungin, was useful in purifying the enzyme to homogeneity. The purification yielded 100 times more enzyme than was obtained from the same quantity of R. sphaeroides cell paste. M.RsrI deposits one methyl group per productive DNA-binding event, as does its functional but sequence-nonhomologous analogue, M.EcoRI. Unlike M.EcoRI, the R. sphaeroides enzyme is a dimer at micromolar concentrations.