Temperature measurement on tissue surface during laser irradiation.

Tissue surface temperature distribution on the treatment site can serve as an indicator for the effectiveness of a photothermal therapy. In this study, both infrared thermography and theoretical simulation were used to determine the surface temperature distribution during laser irradiation of both gel phantom and animal tumors. Selective photothermal interaction was attempted by using intratumoral indocyanine green enhancement and irradiation via a near-infrared laser. An immunoadjuvant was also used to enhance immunological responses during tumor treatment. Monte Carlo method for tissue absorption of light and finite difference method for heat diffusion in tissue were used to simulate the temperature distribution during the selective laser photothermal interaction. An infrared camera was used to capture the thermal images during the laser treatment and the surface temperature was determined. Our findings show that the theoretical and experimental results are in good agreement and that the surface temperature of irradiated tissue can be controlled with appropriate dye and adjuvant enhancement. These results can be used to control the laser tumor treatment parameters and to optimize the treatment outcome. More importantly, when used with immunotherapy as a precursor of immunological responses, the selective photothermal treatment can be guided by the tissue temperature profiles both in the tumor and on the surface.

Remote temperature monitoring in ocular tissue using confocal Raman spectroscopy.

We demonstrated the feasibility of Raman spectroscopy for remote temperature monitoring within the aqueous humor of the rabbit eye in vivo. Using a confocal Raman spectroscopy system, Raman spectra from 2580 to 3800 cm(-1) were recorded in HPLC-grade water and in the aqueous humor of the rabbit eye under in vivo and ex vivo conditions within a temperature range of 14-34 degrees C. The ratio between the integrated Raman intensities of two temperature dependent OH-vibrational regions (OH2/OH1) in the spectra of water showed high linear dependence on temperature both in pure water [0.0049(+/-1.2%)T+0.4522(+/-0.5%), R2=0.99, n=50, p<0.05], as well as in the rabbit aqueous humor [0.0036(+/-2.8%)T+0.4966(+/-0.6%), R2=0.98, n=162, p<0.05] with a high degree of reproducibility and sensitivity ( approximately 0.2-0.7 degrees C). Raman spectroscopy can be used for high resolution and remote monitoring of temperature in the aqueous humor under in vivo conditions.

Aqueous dispersions of single-wall and multiwall carbon nanotubes with designed amphiphilic polycations.

Poor solubility of single-walled and multiwalled carbon nanotubes (NTs) in water and organic solvents presents a considerable challenge for their purification and applications. Macromolecules can be convenient solubilizing agents for NTs and a structural element of composite materials for them. Several block copolymers with different chemical functionalities of the side groups were tested for the preparation of aqueous NT dispersions. Poly(N-cetyl-4-vinylpyridinium bromide-co-N-ethyl-4-vinylpyridinium bromide-co-4-vinylpyridine) was found to form exceptionally stable NT dispersions. It is suggested that the efficiency of macromolecular dispersion agents for NT solubilization correlates with the topological and electronic similarity of polymer-NT and NT-NT interactions in the nanotube bundles. Raman spectroscopy and atomic force and transmission electron microcopies data indicate that the polycations are wrapped around NTs forming a uniform coating 1.0-1.5 nm thick. The ability to wind around the NT originates in the hydrophobic attraction of the polymer backbone to the graphene surface and topological matching. Tetraalkylammonium functional groups in the side chains of the macromolecule create a cloud of positive charge around NTs, which makes them hydrophilic. The prepared dispersions could facilitate the processing of the nanotubes into composites with high nanotube loading for electronic materials and sensing. Positive charge on their surface is particularly important for biological and biomedical applications because it strengthens interactions with negatively charged cell membranes. A high degree of spontaneous bundle separation afforded by the polymer coating can also be beneficial for NT sorting.

Molecular design of strong single-wall carbon nanotube/polyelectrolyte multilayer composites.

The mechanical failure of hybrid materials made from polymers and single-wall carbon nanotubes (SWNT) is primarily attributed to poor matrix-SWNT connectivity and severe phase segregation. Both problems can be successfully mitigated when the SWNT composite is made following the protocol of layer-by-layer assembly. This deposition technique prevents phase segregation of the polymer/SWNT binary system, and after subsequent crosslinking, the nanometre-scale uniform composite with SWNT loading as high as 50 wt% can be obtained. The free-standing SWNT/polyelectrolyte membranes delaminated from the substrate were found to be exceptionally strong with a tensile strength approaching that of hard ceramics. Because of the lightweight nature of SWNT composites, the prepared free-standing membranes can serve as components for a variety of long-lifetime devices.