Hydric Environment and Chemical Composition Shape Non-avian Reptile Eggshell Absorption.

The amniotic egg fulfils a critical role in reproduction by serving as an interface between the external environment and the embryo. Because non-avian reptiles are rarely incubated, they must be heated by, and absorb water from, the oviposition site for the developing embryo. The mechanisms by which they absorb sufficient, but not excess, water and how these mechanisms vary with local habitat is largely unknown, despite its significance to their evolution. Here, we first performed histology, Fourier-transform infrared spectroscopy and dynamic vapor sorption experiments to elucidate the mechanisms of eggshell absorption for 56 reptile species. Then, we used phylogenetic comparative analysis to test the hypothesis that the absorptive capacity of reptile eggshells increases with aridity of the environment. We found that water absorption increases in the presence of a superficial mucopolysaccharide layer and decreases with increased calcium content. We found that eggs from arid environments have highly absorbent eggshells, but only in species with weakly calcified shells. Our results suggest that reptile eggshells have over evolutionary time tuned absorptive capacity to environmental moisture level. Since these eggs often must sustain conflicting constraints, they may serve as inspirations for new biomimetic materials, such as water filtering membranes or humidity sensors.

Interactions of Melanin with Electromagnetic Radiation: From Fundamentals to Applications.

Melanin, especially integumentary melanin, interacts in numerous ways with electromagnetic radiation, leading to a set of critical functions, including radiation protection, UV-protection, pigmentary and structural color productions, and thermoregulation. By harnessing these functions, melanin and melanin-like materials can be widely applied to diverse applications with extraordinary performance. Here we provide a unified overview of the melanin family (all melanin and melanin-like materials) and their interactions with the complete electromagnetic radiation spectrum (X-ray, Gamma-ray, UV, visible, near-infrared), which until now has been absent from the literature and is needed to establish a solid fundamental base to facilitate their future investigation and development. We begin by discussing the chemistries and morphologies of both natural and artificial melanin, then the fundamentals of melanin-radiation interactions, and finally the exciting new developments in high-performance melanin-based functional materials that exploit these interactions. This Review provides both a comprehensive overview and a discussion of future perspectives for each subfield of melanin that will help direct the future development of melanin from both fundamental and applied perspectives.

A liquid metal-polydopamine composite for cell culture and electro-stimulation.

Gallium (Ga) is a low melting point metal in the liquid state in the biological environment which presents a unique combination of fluidity, softness, and metallic electrical and thermal properties. In this work, liquid Ga is proposed as a biocompatible electrode material for cell culture by electro-stimulation since the cytotoxicity of Ga is generally considered low and some Ga compounds have been reported to exhibit anti-bacterial and anti-inflammatory activities. Complementarily, polydopamine (PDA) was coated on liquid Ga to increase the attachment capability of cells on the liquid Ga electrode and provide enhanced biocompatibility. The liquid Ga layer could be readily painted at room temperature on a solid inert substrate, followed by the formation of a nanoscale PDA coating layer resulting in a conformable and biocompatible composite electrode. The PDA layer was shown to coordinate with Ga3+, which is sourced from liquid Ga, providing electrical conductivity in the cell culture medium. The PDA-Ga3+ composite acted as a conductive substrate for advanced electro-stimulation for cell culture methods of representative animal fibroblasts. The cell proliferation was observed to increase by ∼143% as compared to a standard glass coverslip at a low potential of 0.1 V of direct coupling stimulation. This novel PDA-Ga3+ composite has potential applications in cell culture and regenerative medicine.

Mechanistic Observation of Interactions between Macrophages and Inorganic Particles with Different Densities.

Many different types of inorganic materials are processed into nano/microparticles for medical utilization. The impact of selected key characteristics of these particles, including size, shape, and surface chemistries, on biological systems, is frequently studied in clinical contexts. However, one of the most important basic characteristics of these particles, their density, is yet to be investigated. When the particles are designed for drug delivery, highly mobile macrophages are the major participants in cellular levels that process them in vivo. As such, it is essential to understand the impact of particles' densities on the mobility of macrophages. Here, inorganic particles with different densities are applied, and their interactions with macrophages studied. A set of these particles are incubated with the macrophages and the outcomes are explored by optical microscopy. This microscopic view provides the understanding of the mechanistic interactions between particles of different densities and macrophages to conclude that the particles' density can affect the migratory behaviors of macrophages: the higher the density of particles engulfed inside the macrophages, the less mobile the macrophages become. This work is a strong reminder that the density of particles cannot be neglected when they are designed to be utilized in biological applications.

Gallium Nanodroplets are Anti-Inflammatory without Interfering with Iron Homeostasis.

Gallium (Ga) compounds, as the source of Ga ions (Ga3+), have been historically used as anti-inflammatories. Currently, the widely accepted mechanisms of the anti-inflammatory effects for Ga3+ are rationalized on the basis of their similarities to ferric ions (Fe3+), which permits Ga3+ to bind with Fe-binding proteins and subsequently disturbs the Fe homeostasis in the immune cells. Here in contrast to the classic views, our study presents the mechanisms of Ga as anti-inflammatory by delivering Ga nanodroplets (GNDs) into lipopolysaccharide-induced macrophages and exploring the processes. The GNDs show a selective inhibition of nitric oxide (NO) production without affecting the accumulation of pro-inflammatory mediators. This is explained by GNDs disrupting the synthesis of inducible NO synthase in the activated macrophages by upregulating the levels of eIF2α phosphorylation, without interfering with the Fe homeostasis. The Fe3+ transferrin receptor-independent endocytosis of GNDs by the cells prompts a fundamentally different mechanism as anti-inflammatories in comparison to that imparted by Ga3+. This study reveals the fundamental molecular basis of GND-macrophage interactions, which may provide additional avenues for the use of Ga for anti-inflammatory and future biomedical and pharmaceutical applications.

Applications of liquid metals in nanotechnology.

Post-transition liquid metals (LMs) offer new opportunities for accessing exciting dynamics for nanomaterials. As entities with free electrons and ions as well as fluidity, LM-based nanomaterials are fundamentally different from their solid counterparts. The low melting points of most post-transition metals (less than 330 °C) allow for the formation of nanodroplets from bulk metal melts under mild mechanical and chemical conditions. At the nanoscale, these liquid state nanodroplets simultaneously offer high electrical and thermal conductivities, tunable reactivities and useful physicochemical properties. They also offer specific alloying and dealloying conditions for the formation of multi-elemental liquid based nanoalloys or the synthesis of engineered solid nanomaterials. To date, while only a few nanosized LM materials have been investigated, extraordinary properties have been observed for such systems. Multi-elemental nanoalloys have shown controllable homogeneous or heterogeneous core and surface compositions with interfacial ordering at the nanoscale. The interactions and synergies of nanosized LMs with polymeric, inorganic and bio-materials have also resulted in new compounds. This review highlights recent progress and future directions for the synthesis and applications of post-transition LMs and their alloys. The review presents the unique properties of these LM nanodroplets for developing functional materials for electronics, sensors, catalysts, energy systems, and nanomedicine and biomedical applications, as well as other functional systems engineered at the nanoscale.

Polydopamine Shell as a Ga3+ Reservoir for Triggering Gallium-Indium Phase Separation in Eutectic Gallium-Indium Nanoalloys.

Low melting point eutectic systems, such as the eutectic gallium-indium (EGaIn) alloy, offer great potential in the domain of nanometallurgy; however, many of their interfacial behaviors remain to be explored. Here, a compositional change of EGaIn nanoalloys triggered by polydopamine (PDA) coating is demonstrated. Incorporating PDA on the surface of EGaIn nanoalloys renders core-shell nanostructures that accompany Ga-In phase separation within the nanoalloys. The PDA shell keeps depleting the Ga3+ from the EGaIn nanoalloys when the synthesis proceeds, leading to a Ga3+-coordinated PDA coating and a smaller nanoalloy. During this process, the eutectic nanoalloys turn into non-eutectic systems that ultimately result in the solidification of In when Ga is fully depleted. The reaction of Ga3+-coordinated PDA-coated nanoalloys with nitrogen dioxide gas is presented as an example for demonstrating the functionality of such hybrid composites. The concept of phase-separating systems, with polymeric reservoirs, may lead to tailored materials and can be explored on a variety of post-transition metals.

Nanotip Formation from Liquid Metals for Soft Electronic Junctions.

Liquid metals and alloys with high-aspect-ratio nanodimensional features are highly sought-after for emerging electronic applications. However, high surface tension, water-like fluidity, and the existence of self-limiting oxides confer specific peculiarities to their characteristics. Here, we introduce a high accuracy nanometric three-dimensional pulling and stretching method to fabricate liquid-metal-based nanotips from room- or near-room-temperature gallium-based alloys. The pulling rate and step size were controlled with a resolution of up to 10 nm and yielded different nanotip morphologies and lengths as a function of the base liquid metal alloy composition and the pulling parameters. The obtained nanotips presented high aspect ratios over lengths of a few microns and apexes between 10 and 100 nm. The liquid metal alloys were found confined within nanotips with about 10 nm apexes when vertically pulled at 100 nm/s. An amorphous gallium oxide skin was shown to cover the surface of the nanotips, while the liquid core was composed of the initial liquid metal alloys. The electrical contact established at the nanotips was characterized under dynamic conditions. The liquid metal nanotips showed an Ohmic resistance when a continuous liquid metal channel was formed, and a controllable semiconductor state corresponding to a heterojunction formed at the junction between the liquid metal phase and the gallium oxide semiconductor skin. The variable threshold voltages of the heterojunction were controlled via stretching of the nanotips with a 10 nm step resolution. The liquid metal nanotips were also used for establishing soft electronic junctions. This novel method of liquid metal nanotip fabrication with Ohmic and semiconducting behaviors will lead to exciting avenues for developing electronic and sensing devices.

Gallium-Based Liquid Metal Particles for Therapeutics.

Gallium (Ga) and Ga-based liquid metal (LM) alloys offer low toxicity, excellent electrical and thermal conductivities, and fluidity at or near room temperature. Ga-based LM particles (LMPs) synthesized from these LMs exhibit both fluidic and metallic properties and are suitable for versatile functionalization in therapeutics. Functionalized Ga-based LMPs can be actuated using physical or chemical stimuli for drug delivery, cancer treatment, bioimaging, and biosensing. However, many of the fundamentals of their unique characteristics for therapeutics remain underexplored. We present the most recent advances in Ga-based LMPs in therapeutics based on the underlying mechanisms of their design and implementation. We also highlight some future biotechnological opportunities for Ga-based LMPs based on their extraordinary advantages.

Natural Melanin/Polyurethane Composites as Highly Efficient Near-Infrared-Photoresponsive Shape Memory Implants.

Natural melanin is recognized as a biocompatible photothermal agent because of its biologically derived nature and efficient photothermal conversion ability. Here, yak hair melanin (YM) is added to polyurethane (PU) for the fabrication of NIR-photoresponsive shape memory implants. The in vitro toxicity of the YM/PU composites is carried out by exposing them to human mesenchymal stem cells (hMSCs) and mouse fibroblast (L929) cells lines for 24 h, while the in vivo toxicity is investigated by implanting the YM/PU composites in the mouse for two months. No significant differences on cell viability, blood chemistry, hematology, and histological results are observed between YM/PU composites and control groups, suggesting their excellent biocompatibility. The biostability of the YM/PU composites is confirmed by monitoring their in vitro degradation for 12 weeks. The YM/PU column implanted in the back subcutis or vagina of the mouse rapidly recovered to its original state within 60 s under a very low NIR laser (808 nm, 0.5 W/cm2) intensity, which is much lower than the general laser intensity for photothermal cancer therapy (1-2 W/cm2). This work confirms the applicability of the YM/PU composites as long-term implant materials and expedites the use of YM/PU composites as cost-effective candidates for biomedical applications.

Natural Eumelanin and Its Derivatives as Multifunctional Materials for Bioinspired Applications: A Review.

Natural melanin is a ubiquitous material that plays critical biofunctional roles in different living organisms. Scientists have dedicated significant efforts to elucidate the biofunctional roles of melanin since its discovery. It has been confirmed that natural melanin possesses a number of intriguing properties such as broadband light absorption, free-radical scavenging ability, redox activity, metal ion chelating, and electronic-ionic conductivity, enabling it to be a versatile functional material in various applications. Natural eumelanin has been the most investigated type of melanin in the past few decades and is discussed in this Review. Here we have comprehensively discussed the latest advances and associated mechanisms in emerging applications of natural eumelanin in different fields such as functional polymers, energy storage, energy conversion, photocatalysis, photothermal therapy, and wastewater treatment considering its bioinspired properties. Important applications developed based on polydopamine, which is a "eumelanin-like" material, will also be presented to give guidelines to further develop natural-melanin-based applications. Authors' perspectives on the challenges and potentials of developing natural-eumelanin-based applications will also be included. This Review provides a clear picture of the natural-eumelanin-based applications and, in turn, accelerates the expansion of the relevant emerging fields.