RESUMO
OBJECTIVE: This study aimed to probe the correlation of long-term exposure to traffic noise with the risk of type 2 diabetes mellitus (T2DM). METHODS: The data of 480 community residents collected from April 2017 to April 2018 were retrospectively analyzed. Exposure levels for traffic noise were defined using 24-h mean traffic noise. Logistic regression calculated the association between long-term exposure to traffic noise and the risk of T2DM. RESULTS: Overall, 480 enrolled participants were divided into T2DM (n = 45) and non-T2DM (n = 435) groups. Participants with T2DM were older and more likely to be male, had higher BMI, and were frequent drinkers (P < 0.001). The T2DM group displayed higher exposure to traffic noise than the non-T2DM group (P < 0.001). According to quartiles of traffic noise, all participants were categorized into four groups: Q1 (<51.5 dB), Q2 (51.5-<53.9 dB), Q3 (53.9-<58.0 dB), and Q4 (≥58.0 dB). Prevalence of T2DM was 5.4% in Q1, 7.7% in Q2, 10.3% in Q3, and 14.1% in Q4 groups. Multifactor regression analysis showed that age, BMI, drinking history, and traffic noise exposure are risk factors for T2DM (P < 0.05), whereas sex does not seem to have a significant impact on T2DM (P > 0.05). CONCLUSION: Long-term exposure to traffic noise may elevate the risk of T2DM. This suggests that long-term exposure to high levels of traffic noise can increase the incidence of diabetes mellitus, which deserves further consideration.
Assuntos
Diabetes Mellitus Tipo 2 , Exposição Ambiental , Ruído dos Transportes , Humanos , Diabetes Mellitus Tipo 2/epidemiologia , Diabetes Mellitus Tipo 2/etiologia , Masculino , Feminino , Pessoa de Meia-Idade , Ruído dos Transportes/efeitos adversos , Fatores de Risco , Exposição Ambiental/efeitos adversos , Estudos Retrospectivos , Adulto , Idoso , Índice de Massa Corporal , China/epidemiologia , PrevalênciaRESUMO
Hydroxyl-terminated linear and star-shaped telechelic polyisobutylene have been successfully synthesized by living cationic polymerization using propylene oxide (PO)/Titanium tetrachloride (TiCl4) as the initiator system. A one-step method to prepare the terminal hydroxyl group was realized by selecting the cheap and beautiful epoxide as the functional initiator, which has the prospect of industrial application. The polymerization mechanism was proposed by the end structure analysis and Gaussian calculation results. At the same time, the living linear macromolecular chain was used as the starting point to react with divinyl compounds for synthesis of star-shaped hydroxyl-terminated polyisobutylene. The effects of initiator-crosslinking agent ratio, arm length, and reaction time on the coupling reaction were studied.
RESUMO
Fog collection plays an important role in alleviating the global water shortage. Despite great progress in creating bionic surfaces to collect fog, water droplets still could adhere to the microscale hydrophilic region and reach the thermodynamic stable state before falling, which delays the transport of water and hinders the continuous fog collection. Inspired by lotus leaves and cactuses, we designed a Janus membrane that functions to both collect fog from the air and transport it to a certain region. The Janus membrane with opposite wettability contains conical microcolumns with a wettability gradient and hydrophilic copper mesh surface. The apexes of conical microcolumns are superhydrophobic and the rest are hydrophobic. The fog droplets were deposited, coalesced, and directionally transported to the bottom of the conical microcolumns. Then, the droplets unidirectionally passed through the membrane and flowed into the water film on the surface of the copper mesh. The asymmetric structural and wettability merits endow the Janus membrane with an improved fog collection of â¼7.05 g/cm2/h. The study is valuable for designing and developing fluid control equipment in fog collection, liquid manipulation, and microfluidics.
Assuntos
Cactaceae , Cobre , Interações Hidrofóbicas e Hidrofílicas , Água , MolhabilidadeRESUMO
Biomaterial-associated infections caused by pathogenic bacteria have important implications on human health. This study presents the design and preparation of a smart surface with pH-responsive wettability. The smart surface exhibited synergistic antibacterial function, with high liquid repellency against bacterial adhesion and highly effective bactericidal activity. The wettability of the surface can switch reversibly between superhydrophobicity and hydrophobicity in response to pH; this controls bacterial adhesion and release. Besides, the deposited silver nanoparticles of the surface were also responsible for bacterial inhibition. Benefiting from the excellent liquid repellency, the surface could highly resist bacterial adhesion after immersing in a bacterial suspension for 10 s (85%) and 1 h (71%). Adhered bacteria can be easily eliminated using deposited silver nanoparticles during the subsequent treatment of alkaline bacterial suspension, and the ratio of deactivated bacteria was above 75%. After the pH returned to neutral, the deactivated bacteria can be easily released from the surface. This antibacterial surface showed an improved bacterial removal efficiency of about 99%. The results shed light on future antibacterial applications of the smart surface combining both bactericidal and adhesion-resistant functionalities.
Assuntos
Antibacterianos/farmacologia , Cobre/química , Ácidos Graxos/química , Compostos de Sulfidrila/química , Antibacterianos/química , Aderência Bacteriana/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Concentração de Íons de Hidrogênio , Nanopartículas Metálicas/química , Prata/química , Prata/farmacologia , Staphylococcus aureus/efeitos dos fármacos , MolhabilidadeRESUMO
Aqueous cationic polymerization has attracted considerable interest as a novel polymerization technique, because it conforms to the "green chemistry" trend and challenges the concept of traditional cationic polymerization. In this paper, a CumOH/B(C6F5)3/Et2O system was used to initiate the aqueous polymerization of p-methylstyrene through suspension and emulsion methods. Several types of surfactants were used, including the cationic surfactant CTAB, non-ionic surfactant NP-40, and anionic surfactant SDBS, and the influences of initiator concentration and temperature on polymerization were investigated. Consistent with previous literature, initiator activity was positively correlated with temperature unlike in traditional cationic polymerization. Gaussian 09W simulation software was used to calculate and optimize changes in the bond lengths and angles of B(C6F5)3 after ether was added to the system. The addition of ether increased the polarity of B(C6F5)3, rendering it soluble in water. 1H-NMR was used in identifying the main chain and terminal structures of the polymer, and the mechanism of p-methylstyrene aqueous phase cationic polymerization was proposed.
RESUMO
Soft actuators with the integration of facile preparation, rapid actuation rate, sophisticated motions, and precise control over deformation for application in complex devices are still highly desirable. Inspired by the aligned structures of moisture responsive pineal scales, an oil-triggered Janus actuator composed of a smooth hydrophobic surface and a superhydrophobic surface with aligned microchannels by simple laser etching was fabricated successfully, which can deform into various desirable shapes and recover to the original shape when triggered by oil and ethanol molecules. The aligned microchannel design causes different oil spread distances in the longitudinal and transverse directions, resulting in orientation-controlled bending and twisting with large-scale displacement. By changing the orientations of the patterned microchannels, one-dimensional folding deformation, twisting, rolling curling and object-inspired architectures can be facilely programmed. The reversible oil-triggered actuator will inspire more attractive applications such as in vivo surgery, biomimetic devices, energy harvesting systems and soft robotics.
RESUMO
Soft actuators have tremendous applications in diverse fields. Facile preparation, rapid actuation, and versatile actions are always pursued when developing new types of soft actuators. In this paper, we present a facile method integrating laser etching and mechanical cutting to prepare Janus actuators driven by oil. A Janus film with superhydrophobic and hydrophobic sides was fabricated successfully. By cutting the functional layer at the desired positions, a number of quintessential oil-driven soft devices were demonstrated. Furthermore, Janus actuators with surfaces of different wettabilities exhibited different swelling behaviors, and different media manifested different surface extensions; thus, these actuators are promising candidates for soft actuators and also realized on-off switchability between an oil/water mixture and ethanol. This study offers novel insight into the design of soft actuators, and this insight may be helpful for developing an oil-driven soft actuator that can be operated like a human finger to manipulate any object and extending stimuli-responsive applications for soft robotics.
RESUMO
A sensitive, selective and recyclable electrochemical sensor is designed for ATP detection based on amino-functionalized metal-organic framework. The functional MOF as the sensor is constructed by one-step synthesis Ce-MOF and sequentially modified on the Au electrode and conjugated with the aptamer of ATP. The presence of target ATP leads to the conformational change of aptamer strands and strong electrochemical impedance. The electrochemical sensor can detect ATP down to 5.6 nM with the linear range of 10 nm to 1000 µM. The present study is the first report on the use of MOF as an electrochemical sensor for ATP at nM level. This strategy has been successfully applied in detection of ATP in serum of cancer patients, which reveals its potential application in clinical diagnosis.
Assuntos
Trifosfato de Adenosina/análise , Técnicas Eletroquímicas/métodos , Estruturas Metalorgânicas/metabolismo , Aptâmeros de Nucleotídeos/metabolismoRESUMO
BACKGROUND: The laparoscopic mini-gastric bypass is a newly emerged surgical procedure in recent years. Owe to safe and simple process and effective outcomes, laparoscopic mini-gastric bypass has quickly become one of the most popular procedures in some countries. The safety and effectiveness of laparoscopic mini-gastric bypass versus laparoscopic sleeve gastrectomy remain unclear. METHODS: A systematic literature search was performed in PubMed, Embase, Cochrane library from inception to May 20, 2017. The methodological quality of Randomized Controlled Trials and non-Randomized Controlled Trials were, respectively, assessed by Cochrane Collaboration's tool for assessing risk of bias and Newcastle-Ottawa scale. The meta-analysis was performed by RevMan 5.3 software. RESULTS: Patients receiving mini-gastric bypass had a lot of advantageous indexes than patients receiving sleeve gastrectomy, such as higher 1-year EWL% (excess weight loss), higher 5-year EWL%, higher T2DM remission rate, higher hypertension remission rate, higher obstructive sleep apnea (OSA) remission rate, lower osteoarthritis remission rate, lower leakage rate, lower overall late complications rate, higher ulcer rate, lower gastroesophageal reflux disease (GERD) rate, shorter hospital stay and lower revision rate. No significant statistical difference was observed on overall early complications rate, bleed rate, vomiting rate, anemia rate, and operation time between mini-gastric bypass and sleeve gastrectomy. CONCLUSION: Mini-gastric bypass is a simpler, safer, and more effective bariatric procedure than laparoscopic sleeve gastrectomy. Due to the biased data, small sample size and short follow-up time, our results may be unreliable. Large sample and multicenter RCT is needed to compare the effectiveness and safety between mini-gastric bypass and sleeve gastrectomy. Future study should also focus on bile reflux, remnant gastric cancer, and long term effectiveness of mini-gastric bypass.
Assuntos
Gastrectomia/métodos , Derivação Gástrica/métodos , Obesidade Mórbida/cirurgia , Segurança do Paciente , Humanos , Complicações Pós-OperatóriasRESUMO
Orderly nucleic acid aggregates (ONAAs) self-assembled on mesoporous silica nanoparticles (MSNs) with positively charged aminopropyl groups (PC) were firstly developed. Interestingly, a novel electrostatic DNA self-assembly could realize hybridization chain reaction (HCR) on the surface of PCMSNs in single cells. Significantly, a non-destructive amplification strategy based on ONAAs-PCMSNs was successfully developed for miRNA detection and in situ imaging by the prominent and agminated fluorescence-bright spots in living cells.
Assuntos
MicroRNAs/análise , Ácidos Nucleicos/química , Análise de Célula Única , Eletricidade Estática , Linhagem Celular Tumoral , DNA , Humanos , Nanopartículas , Hibridização de Ácido NucleicoRESUMO
Magnesium alloys are highly desirable for a wide range of lightweight structural components. However, rolling Mg alloys can be difficult due to their poor plasticity, and the strong texture yielded from rolling often results in poor plate forming ability, which limits their further engineering applications. Here we report a new hard-plate rolling (HPR) route which achieves a large reduction during a single rolling pass. The Mg-9Al-1Zn (AZ91) plates processed by HPR consist of coarse grains of 30-60 µm, exhibiting a typical basal texture, fine grains of 1-5 µm and ultrafine (sub) grains of 200-500 nm, both of the latter two having a weakened texture. More importantly, the HPR was efficient in gaining a simultaneous high strength and uniform ductility, i.e., ~371 MPa and ~23%, respectively. The superior properties should be mainly attributed to the cooperation effect of the multimodal grain structure and weakened texture, where the former facilitates a strong work hardening while the latter promotes the basal slip. The HPR methodology is facile and effective, and can avoid plate cracking that is prone to occur during conventional rolling processes. This strategy is applicable to hard-to-deform materials like Mg alloys, and thus has a promising prospect for industrial application.
RESUMO
In the title compound, C(21)H(19)NO(2), the six-membered heterocycle assumes a screw-boat conformation. The phenyl ring is oriented with respect to the pyrrole ring at a dihedral angle of 64.76â (10)°. An intra-molecular C-Hâ¯O hydrogen bond helps to stabilize the mol-ecular structure. There are weak C-Hâ¯π inter-actions between inversion-related mol-ecules in the crystal.
RESUMO
Three Phe and Tyr derivatives, 2-amino-3-(4-aminophenyl)-propionic acid (AAP), 3E-[5-(2-amino-2-carboxyethyl)-2-methoxyphenyl]-acrylic acid (AMPA) and 3-(4-aminophenyl)-2-(carboxymethyl-amino)-propionic acid (ACP) have been chosen as the ligands to construct four kinds of novel metal-organic frameworks (MOFs) (five structures). These structures are, [Cd(II){(R)-AAP}(Py)(H(2)O)](ClO(4)), (R)-1; [Cd(II){(S)-AAP}(H(2)O)(2)](ClO(4)), (S)-2; [Zn(2) (II){(R,S)-AMPA}(H(2)O)], (R,S)-3; [Zn(2) (II){(R)-ACP}(Py)(3)](ClO(4))(2), (R)-4; and the inversion twin of (R)-1. Rational design to adjust the "depth" and the "width" of ligands can mediate the size and the shape of the grids of these 2D layers. Additionally, among these compounds, three pure chiral coordination polymers are obtained, owing to the inducement of chirality by the modified amino acids. This property makes them potential NLO materials.