Enhanced production of bioethanol through supercritical carbon dioxide-mediated pretreatment and saccharification of dewaxed bagasse.

The pretreatment and saccharification of dewaxed bagasse (DWB) has been investigated under various reaction conditions ranging 2000 to 3200 psi, at 70 ± 1 °C in supercritical carbon dioxide (SCC). This has been in attempt to transform the DWB into fermentable sugar and bioethanol in high yields. The effect of SCC mediated pretreatment and enzymatic hydrolysis on structural and morphological alterations in DWB has been ascertained through diverse analytical methods. The sugar has been released through cellulase (40 FPU/mL) mediated enzymatic hydrolysis of pretreated DWB in sodium acetate buffer (pH 4.7) within 1 h at SCC 2800 psi, 70 ± 1 °C. The released sugar was subsequently fermented in the presence of yeast (Saccharomyces crevices, 135 CFU) at 28 ± 1 °C over 72 h to afford the bioethanol. The SCC mediated process conducted in acetic acid:water media (1:1) at 2800 psi, 70 ± 1 °C over 6 h has afforded the pretreated DWB with maximum yield towards the production of fermentable sugar and bioethanol. The production of fermentable sugar and bioethanol has been electrochemically estimated through cyclic voltammetry (CV) and square wave voltammetry (SWV) over glassy carbon electrode in KOH (0.1 M). The electrochemical methods were found selective and in close agreement for estimation of the yields (%) of fermentable sugars and bioethanol. The yield (%) of fermentable sugar estimated from CV and SWV were 80.10 ± 5.34 and 79.00 ± 5.09 respectively. Whereas the yield (%) of bioethanol estimated from CV and SWV were 81.30 ± 2.78% and 78.6 ± 1.25% respectively. Present investigation delivers a SCC mediated green and sustainable method of pretreatment of DWB to afford the enhanced saccharification, to produce bioethanol in high yields.

Electrochemical monitoring of congo red degradation using strontium titanate-doped biochar nanohybrids derived photocatalytic plates.

Present investigation demonstrates the development and characterization of strontium titanate (SrTiO3) doped biochar nanohybrid photocatalysts. Biochar nanohybrid was synthesized using an ultrasonic-assisted dispersion technique, which involved dispersing SrTiO3 nanoparticles into activated biochar at a weight ratio of 1:2 (w/w) under ambient conditions. The development of the biochar nanohybrid was verified through a comprehensive analysis of their spectral, microstructural, thermal, electrical, and electrochemical properties. The scanning electron microscopy analysis reveals a surface-associated multiphase morphology of the biochar nanohybrid, attributed to the uniform distribution of SrTiO3 within the activated biochar matrix. Biochar nanohybrid exhibited a reduced optical band gap of 2.77 eV, accompanied by a crystallite size of 32.45. Thermogravimetric analysis revealed the thermal stability of the biochar nanohybrid, as evidenced by a char residue of 70.83% at 1000 °C. The working electrodes derived from biochar nanohybrid have exhibited ohmic behavior and displayed a significantly enhanced DC conductivity (mS/cm) of 1.13, surpassing that of activated biochar (0.53) and SrTiO3 (0.62) at 100 V. The developed biochar nanohybrid were employed for the degradation of congo red dye by exposing the dye solution to photocatalytic plates. These photocatalytic plates were prepared by coating biochar nanohybrid onto glass plates using epoxy-based reactive binders for secure binding. The photodegradation of congo red was evaluated through cyclic voltammetric analysis in a 0.1 M KCl solution at pH 8.0, resulting in an impressive 99.95% photocatalytic efficiency in degrading a congo red solution (50 mg/L). This study presents a novel approach for the fabrication of biochar nanohybrid-derived photocatalytic plates, offering high photocatalytic efficiency for the degradation of congo red dye.

Comparative e-waste plastics biodegradation efficacy of monoculture Pseudomonas aeruginosa strain PE10 and bacterial consortium under in situ condition.

A significant amount of electronic obsoletes or electronic waste (e-waste) is being generated globally each year; of these, ~20% of obsolete electronic items have plastic components. Current remediation practices for e-waste have several setbacks due to its negative impact on the environment, agro-ecosystem, and human health. Therefore, comparative biodegradation studies of e-waste plastics by monoculture Pseudomonas aeruginosa strain PE10 and bacterial consortium consisting of Achromobacter insolitus strain PE2 (MF943156), Acinetobacter nosocomialis strain PE5 (MF943157), Pseudomonas lalkuanensis PE8 (CP043311), and Stenotrophomonas pavanii strain PE15 (MF943160) were carried out in situ. Biological treatment of e-waste with these candidates in soil ecosystems has been analyzed through diversified analytical techniques such as Fourier transform infrared spectroscopy (FTIR), thermogravimetric-derivative thermogravimetry-differential thermal analysis (TG-DTG-DTA), and scanning electron microscopy (SEM). Both P. aeruginosa strain PE10 and the bacterial consortium have a tremendous ability to accelerate the biodegradation process in the natural environment. However, FTIR analysis implied that the monoculture had better efficacy than the consortium, and it was consistent until the incubation period used for the study. Some polymeric bonds such as ν C=C and δ C-H were completely removed, and ν C=C ring stretching, νasym C-O-C, νsym C-H, etc. were introduced by strain PE10. Furthermore, thermal analysis results validated the structural deterioration of e-waste as the treated samples showed nearly two-fold weight loss (WL; 6.8%) than the untreated control (3.1%) at comparatively lower temperatures. SEM images provided the details of surface disintegrations. Conclusively, individual monoculture P. aeruginosa strain PE10 could be explored for e-waste bio-recycling in agricultural soil ecosystems thereby reducing the cost, time, and management of bioformulation in addition to hazardous pollutant reduction.

Selection of potential bacterial strains to develop bacterial consortia for the remediation of e-waste and its in situ implications.

The management of electronic waste (e-waste) becomes a global issue in this digital era. Existing conventional practices are harmful for dealing with the e-waste, therefore, indigenous soil bacteria were explored for e-waste treatment through enrichment culture approach followed by screening, identification and their bioformulation used for in situ investigation. Soil bacteria were enriched in the presence of e-waste after 30 days of incubation under standard laboratory conditions. This finding was established through λmax values that were higher in the case of soil enrichment than the control. The biodegradation of e-waste by the selected strains during enrichment and in situ experiment was confirmed by FTIR, TG-DTG-DTA and SEM analysis. The FTIR spectra evidently support that microbial communities present in the enriched soil has affected the C-chain and used as carbon source for their growth. This chemical structural degradation of e-waste was further substantiated by thermal and SEM analysis. Thermograms experimentally show that the decomposition of the treated samples achieved comparatively at very low temperature than the control sample, while SEM micrographs revealed the surface morphology with distinct disintegrations. These result authenticated the biodegradation process carried out by the soil bacteria. Furthermore, bacterial community analysis confirmed that the used strains were persisting in the experimental pits throughout the trial period. Thus, this study besides providing direct and standardized protocol for screening and selection of efficient e-waste utilizing bacteria is also demonstrating potential consortia which are ready to be used.

Comparative in situ biodegradation studies of polyhydroxybutyrate film composites.

Application of polyhydroxybutyrate (PHB) to plastic industry has expanded over the last decades due to its attracting features over petro-based plastic, and therefore, its waste accumulation in nature is inevitable. In the present study, a total of four bacterial strains, viz., MK3, PN12, PW1, and Lna3, were formulated into a consortium and subsequently used as biological tool for degradation of biopolymers. The consortium was tested through λ max shifts under in vitro conditions for utilization of PHB as sole carbon source. Talc-based bioformulations of consortium were used for the degradation of PHB film composites under in situ conditions. After 9 months of incubation, the recovered samples were monitored through Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM), respectively. Analytical data, viz., changes in λ max shifts (212-219 nm), FT-IR spectra, and SEM micrographs, revealed the biodegradation potential of developed consortium against PHB film composites, i.e., higher degradation of copolymer films was found over blend films. The used consortium had enhanced the rate of natural degradation and can be further used as a natural tool to maintain and restore global environmental safety.

Physio-biochemical basis of iron-sulfide nanoparticle induced growth and seed yield enhancement in B. juncea.

Metal nanoparticles have been reported to influence plant growth and productivity. However, the molecular mechanisms underlying the effects have not been completely understood yet. Current work describes the physio-biochemical basis of iron sulfide nanoparticle induced growth and yield enhancement in Brassica juncea. Iron sulfide nanoparticles (0, 2, 4, 6, 8 and 10 ppm) were used for foliar treatment of B. juncea at 30, 45 and 60 days after sowing, under field conditions. Foliar treatment of 4 ppm iron sulfide nanoparticle solution at 30 days after sowing brought maximal enhancement in agronomic attributes of the treated plants. Results of assays i.e. total chlorophyll, electrolyte leakage, Malondialdehyde (MDA), proline, H2O2 and antioxidant enzyme activities indicated the benign effect of iron sulfide nanoparticles on plants. Consequently, improved redox status of the treated plants, enabled them to assimilate higher photosynthate. The augmentation in growth and seed yield in iron sulfide nanoparticle treated plants was amply supported by activation of RUBISCO small subunit (rubisco S), RUBISCO large subunit (rubisco L), glutamine synthetase (gs) and glutamate synthase (gogat) genes. Thus, iron sulfide nanoparticle induced growth and yield enhancement is proposed to be mediated through activation of carbon and nitrogen assimilatory pathways at specific growth stage. The iron content in the leaves and root tissues of the treated plants was also significantly improved.

Response of indigenously developed bacterial consortia in progressive degradation of polyvinyl chloride.

Thermoplastic-based materials are recalcitrant in nature, which extensive use affect environmental health. Here, we attempt to compare the response of indigenously produced bacterial consortium-I and consortium-II in degrading polyvinyl chloride (PVC). These consortia were developed by using different combination of bacterial strains of Pseudomonas otitidis, Bacillus cereus, and Acanthopleurobacter pedis from waste disposal sites of Northern India after their identification via 16S rDNA sequencing. The progressive degradation of PVC by consortia was examined via scanning electron microscopy, atomic force microscopy, UV-vis, FT-IR spectra, gel permeation chromatography, and differential scanning calorimetry analysis at different incubations and time intervals. The consortium-II was superior over consortium-I in degrading the PVC. Further, the carbon source utilization analysis revealed that the extensive use of consortia has not any effect on functional diversity of native soil microbes.

Supercritical synthesis of poly (2-dimethylaminoethyl methacrylate)/ferrite nanocomposites for real-time monitoring of protein release.

A supercritical carbon dioxide (SCC)-assisted process was developed to synthesize protein-supported poly (2-dimethylaminoethyl methacrylate)/ferrite nanocomposites (PNCs). The process involve 2,2-azobisisobutyronitrile-initiated in situ polymerization of 2-dimethylaminoethyl methacrylate in presence of ferrite nanoparticles and bisacrylamide at 90 ± 1 °C, 1200 psi over 6 h in SCC. This was followed by subsequent loading of bovine serum albumin (BSA) as a model protein over PNCs in phosphate buffer (PBS, pH 7.4) at 1200 psi, 35 ± 1 °C over additional 2 h in SCC. The formation of PNCs was ascertained through ultraviolet-visible, Fourier transform-infrared, X-ray diffraction spectra, transmission electron, atomic force microscopy and magnetometry. The developed process extends large scale production of nanomagnetic PNCs suitable as carrier for protein release applications with optimal release properties. The release of protein from PNCs under in vitro in PBS down to nanomolar range with high temporal resolution, speed and reproducibility was quantified through square wave voltammetry.

Silver nanoparticle-mediated enhancement in growth and antioxidant status of Brassica juncea.

Metal nanoparticles can potentially be used as tools for engineering biological redox reactions. Present study underlines the effect of silver metal nanoparticles (at 0, 25, 50, 100, 200 and 400 ppm) on the growth and antioxidant status of 7-day-old Brassica juncea seedlings. Fresh weight, root and shoot length, and vigor index of seedlings is positively affected by silver nanoparticle treatment. It induced a 326 % increase in root length and 133 % increase in vigor index of the treated seedlings. Improved photosynthetic quantum efficiency and higher chlorophyll contents were recorded in leaves of treated seedlings, as compared to the control seedlings. Levels of malondialdehyde and hydrogen peroxide decreased in the treated seedlings. Nanoparticle treatment induced the activities of specific antioxidant enzymes, resulting in reduced reactive oxygen species levels. Decrease in proline content confirmed the improvement in antioxidant status of the treated seedlings. The observed stimulatory affects of silver nanoparticles are found to be dose dependent, with 50 ppm treatment being optimum for eliciting growth response. Present findings, for the first time indicate that silver nanoparticles promote the growth of B. juncea seedlings by modulating their antioxidant status.

Implications of SPION and NBT nanoparticles upon in-vitro and in-situ biodegradation of LDPE film.

Comparative influence of two nanoparticles viz. superparamagnetic iron oxide nanoparticles (SPION) and nanobarium titanate (NBT) was studied upon the in-vitro and in-situ low-density polyethylene (LDPE) biodegradation efficiency of a potential polymer-degrading microbial consortium. Supplementation of 0.01% concentration (w/v) of the nanoparticles in minimal broth significantly increased the bacterial growth, along with early onset of the exponential phase. Under in-vitro conditions, lambda-max shifts were quicker with nanoparticles and Fourier transform infrared spectroscopy (FTIR) illustrated significant changes in CH/CH2 vibrations, along with introduction of hydroxyl residues in the polymer backbone. Further, simultaneous thermogravimetric-differential thermogravimetry-differential thermal analysis (TG-DTG-DTA) reported multiple-step decomposition of LDPE degraded in the presence of nanoparticles. These findings were supported by scanning electron micrographs (SEM) which revealed greater dissolution of film surface in the presence of nanoparticles. Furthermore, progressive degradation of the film was greatly enhanced when it was incubated under soil conditions for 3 months with the nanoparticles. The study highlights the significance of bacteria-nanoparticle interactions which can dramatically influence key metabolic processes like biodegradation. The authors also propose the exploration of nanoparticles to influence various other microbial processes for commercial viabilities.

Implications of fullerene-60 upon in-vitro LDPE biodegradation.

Fullerene-60 nanoparticles were used for studying their influence upon the LDPE biodegradation efficiency of two potential polymer-degrading consortia comprising of three bacterial strains each. At a concentration of 0.01% (w/v) in minimal broth lacking dextrose, fullerene did not have any negative influence upon the consortial growth. However, fullerene was found to be detrimental for bacterial growth at higher concentrations (viz. 0.25%, 0.5% and 1%). Although, addition of 0.01% fullerene into the biodegradation assays containing 5 mg/ml LDPE subsided growth-curves significantly, but subsequent analysis of degraded products revealed enhanced biodegradation. Fourier transform infrared spectroscopy (FT-IR) revealed breakage and formation of chemical bonds along with introduction of nu C-O frequencies into hydrocarbon backbone of LDPE. Further, simultaneous thermogravimetric-differential thermogravimetry-differential thermal analysis (TG-DTG-DTA) revealed higher number of decomposition steps along with a 1,000-fold decrease in the heat of reactions (DeltaH) in fullerene-assisted biodegraded LDPE suggesting probable formation of multiple, macromolecular by-products. This is the first report whereby fullerene-60, which is otherwise considered toxic, has helped to alleviate polymer biodegradation process of bacterial consortia.