RESUMO
Reversible wettability transition has drawn substantial interest because of its importance for widespread applications, but facile realization of such transition on ceramic surfaces, which is promising for achieving on-demand droplet manipulation under harsh conditions, remains rare. Herein, superhydrophobic zirconia ceramic surfaces that can reversibly and repeatedly transit between superhydrophobicity and superhydrophilicity after alternate heating treatments have been fabricated using a femtosecond laser. The underlying mechanisms of the complex wettability transitions on the laser-ablated zirconia surfaces are elucidated. Hydrophilic polished zirconia surfaces immediately become superhydrophilic after laser ablation, which is mainly attributed to the amplification effect of the laser-induced micro/nanostructures and has no obvious relationship with oxygen vacancies. The obtained superhydrophilic surfaces are transformed into superhydrophobic surfaces because of rapid adsorption of airborne organic compounds driven mainly by physical interaction under heating conditions. With the alternate removal and re-adsorption of organic compounds, reversible and repeatable wettability transition between superhydrophobicity and superhydrophilicity happens on the zirconia surfaces. The laser-induced micro/nanostructures also contribute to the wettability transitions. Furthermore, utilizing the superhydrophobic zirconia surfaces with switchable wettability, on-demand transfer of strong acid droplet in air and oil droplet under strong acid solution has been achieved. This work will inspire the environmentally friendly fabrication of switchable superhydrophobic ceramic surfaces and their multifunctional applications under harsh conditions.
RESUMO
To improve the motion distortion caused by LiDAR data at low and medium frame rates when moving, this paper proposes an improved algorithm for scanning matching of estimated velocity that combines an IMU and odometer. First, the information of the IMU and the odometer is fused, and the pose of the LiDAR is obtained using the linear interpolation method. The ICP method is used to scan and match the LiDAR data. The data fused by the IMU and the odometer provide the optimal initial value for the ICP. The estimated speed of the LiDAR is introduced as the termination condition of the ICP method iteration to realize the compensation of the LiDAR data. The experimental comparative analysis shows that the algorithm is better than the ICP algorithm and the VICP algorithm in matching accuracy.
RESUMO
The lack of wear resistance is always a challenge for clinical applications of resin-based dental composites (RBDCs). In this study, the role of the calcium release from RBDCs in the adsorption and lubrication of salivary proteins was investigated, aiming to provide useful insights concerning the development of high-performance RBDCs. Three experimental RBDCs with distinct calcium-releasing capabilities were prepared using calcium phosphate particles as inorganic fillers. Salivary protein adsorption and film-forming on RBDC surfaces were characterized by atomic force microscopy, while the mechanical properties and lubricating effect of salivary pellicle were examined using nano-indentation/scratch techniques. Results showed that calcium release from RBDCs plays a crucial role in mediating the electrostatic interaction between salivary proteins and composite surface, thereby promoting the formation of salivary pellicle with a multi-layer structure. The mechanical properties and lubricating effect of the pellicle are positively related to the level of calcium release. In sum, for RBDCs with robust calcium release, saliva provides effective lubrication to resist composite wear. Incorporating calcium compounds is a promising way to improve the wear resistance of RBDCs in the oral cavity.
Assuntos
Cálcio , Proteínas e Peptídeos Salivares , Adsorção , Materiais Dentários/análise , Lubrificação , Saliva/química , Propriedades de SuperfícieRESUMO
Human tooth enamel is composed of enamel rods and surrounding inter-rod enamel. As the fundamental block of enamel, hydroxyapatite (HAP) nanofibers are mostly longitudinally aligned in the rods but inclined in the inter-rod enamel. The surface hardening of enamel by occlusal loading is reportedly a result of hydroxyapatite nanofiber fragmentation and rearrangement and plays an important role in the anti-wear performance of enamel, but little is known about the effect of HAP nanofiber orientation on enamel surface hardening. In this study, the occlusal loading-induced surface hardening behaviors of enamel at different zones (rod and inter-rod) and different orientations (occlusal and axial) were investigated in vitro using impact treatment and a nanoindentation technique, aiming to reveal the effect of nanofiber orientation on enamel surface hardening. It was found that surface hardening by occlusal loading occurs in the rod and inter-rod areas, but the former shows a greater hardening degree than the latter, leading to an increase in the mechanical heterogeneity of enamel surface. Under the same loading condition, the HAP nanofibers in the inter-rod enamel are more likely to tilt into transverse nanofibers than those in the rods. Compared with longitudinal nanofibers, transverse nanofibers fragment into more transverse crystal particles, but the transverse particles impair the compactness of the hardening layer and decrease its hardening degree. In sum, inherent non-uniform nanofiber orientation endows the enamel with the ability to undergo heterogeneous surface hardening upon occlusal loading, which is critical for providing and maintaining its surface mechanical heterogeneity. These findings extend the understanding of the relationship between microstructure and mechanical properties of dental enamel and provide valuable insights into the bionic design of engineering materials.
Assuntos
Nanofibras , Dente , Esmalte Dentário , Durapatita/química , HumanosRESUMO
Human tooth enamel, the most mineralized tissue in body, contains less than 2 wt% protein. Consequently, the importance of the protein to enamel mechanical response has always been overlooked. In this study, the role of minor protein in providing enamel microstructure and mechanical performance, especially tribological properties, were studied using deproteinization treatment and nano-indentation/scratch technique. Via the change from the original to the deproteinated conditions, a nanostructure degeneration from the assembly of hydroxyapatite (HA) crystals into nano-fibers to crystal aggregation has been found between the high-wear-resistance and low-wear-resistance on the enamel surface. Correspondingly, an energy dissipation to cause a unit volume of wear on enamel surface decreases by 50%, and wear volume increases by 80%. With the presence of protein, the occurrence of enamel wear requires to break the interfacial protein bonding between the HA crystals in nano-fibers and the break dissipates considerable energy, which benefits the enamel to resist wear. Thus, the protein in enamel, although of a very low content, is essential to resisting wear by mediating the assembly of rigid HA crystals via interfacial protein bonding. Replicating functions of the protein component will be critical to the successful development of bio-inspired materials that are designed for wear-resistance.
Assuntos
Esmalte Dentário , Desgaste dos Dentes , Humanos , Propriedades de SuperfícieRESUMO
PURPOSE: Endoscopy is a common and effective method to treat digestive system diseases. Not only can it detect the physiological state of the digestive tract, but also can conduct clinical operations. As a result, it's of great significance to make clear the relationship between the clinical operation and the complications. METHODS: Considering the difficulty in measuring the contact force and determining the stress distribution in real time during endoscopy, a specific-patient finite element model for the frictional behavior at the endoscope-esophagus interface was built in current study. By collecting the CT data of the patient, a 3D esophagus model was built and divided into three characteristic regions (narrow region, thoracic region and abdominal region) according to the physiological structure. RESULTS: Results showed that the radius of the narrowest position was the dominant factor for the maximum von Mises stress when the endoscope passed through the narrow region. For abdominal region and thoracic region, with the increasing coefficient of friction (COF) and amplitude, the total force duo to frictional force (CFSM), frictional dissipation (FD), strain energy (SE) and maximum von Mises stress (Max) all increased correspondingly. Meanwhile, the region of stress concentration gradually approached the initial contact stage. CONCLUSIONS: The results can provide theoretical basis and technical support for clinical application and offer some suggestions for medical workers during endoscopy as well.
Assuntos
Endoscopia , Esôfago/diagnóstico por imagem , Análise de Elementos Finitos , Fricção , Abdome/diagnóstico por imagem , Idoso , Fenômenos Biomecânicos , Humanos , Masculino , Modelos Biológicos , Estresse Mecânico , Tórax/diagnóstico por imagemRESUMO
Experimental observations in the open literature indicate that soft tissues are slightly compressible, and this characteristic affects not only their overall elastic response but also their damage evolution and failure mechanism. In this study, we find that the compressibility of liver tissues is also closely related to the initial specimen volume according to the confined compression tests: the samples with smaller initial volume exhibit more compressible behavior compared to the larger ones. To include this initial-volume dependent effect, we developed a novel volumetric strain energy model with two variables, i.e., the bulk modulus and the compressibility factor. A detailed scheme was proposed as well to identify these two parameters, and the relationship between the bulk modulus and the initial volume was clarified. Findings from this study will help to deepen the understanding of the biomechanical properties of soft tissues. STATEMENT OF SIGNIFICANCE: Liver is a highly vascular organ and traditionally assumed to be an incompressible medium. However, through the confined compression tests, we found that the samples with smaller initial volumes exhibit more compressible behavior. Hence, we developed a novel strain energy density model to characterize the initial-volume dependent hyperelastic response, and found that the bulk modulus of liver tissues is positively related to the initial volume. Our results suggest that the compressibility of liver tissues should be considered in the future study of liver biomechanics.
Assuntos
Fígado , Animais , Fenômenos Biomecânicos , Pressão , Estresse Mecânico , SuínosRESUMO
Previous studies have suggested that surface hardening occurs in human tooth enamel under certain loading conditions. However, the occurrence mechanism and significance remain unclear. In this study, the surface hardening behavior of enamel under masticatory loading was studied in vitro using impact treatment and the nanoindentation/scratch technique to identify the mechanism and antiwear effect. The fundamental block of enamel is made of hydroxyapatite (HAP) nanofibers, which consist of fine nanoparticles held together by protein. These fibers respond to masticatory loading in two ways: bending deflection at low loads and fragmentation at high loads. When the contact pressure exceeds the bonding strength between the nanoparticles, the HAP fibers split into fine nanoparticles and then form a surface layer consisting of tightly packed nanoparticles. This results in surface hardening dominated by an increased hardness and elastic modulus. The maximum degree and depth of surface hardening were determined as approximately 60% and 100 nm, respectively. With the occurrence of surface hardening, the wear resistance of the enamel is enhanced, which is manifested by a reduced friction coefficient and wear volume. In summary, the surface hardening of enamel induced by masticatory loading is a result of HAP nanoparticle rearrangement as a response of the enamel hierarchical structure to high chewing loads. It is adaptive overload protection derived from the enamel hierarchical structure and plays a critical role in resisting excessive wear induced by high chewing loads.
Assuntos
Esmalte Dentário , Mastigação , Módulo de Elasticidade , Fricção , Dureza , HumanosRESUMO
BACKGROUND: During clamping operation for minimally invasive intestinal surgery, patients often suffer from small intestine trauma. This phenomenon will lead to various complications, increase recovery time and cause pain for patients. METHODS: In this paper, preliminary simulations of small intestine clamping operations in the minimally invasive surgery were made by conducting compression tests under different clamping stresses, durations and loading rates. A pathological grading system was designed after microscope observation to quantitatively evaluate the trauma of small intestine tissue. FINDINGS: Results showed that different traumas: inflammatory cell infiltration, hyperemia, hemorrhage and rupture between serosa and muscularis, as well as villi destruction could be observed on the clamping sites of the small intestine tissue. When the clamping parameters (clamping stress, duration and loading rate) increased, the degree of the tissue trauma increased. There existed safe thresholds for clamping operations, at which severe trauma of small intestine tissues could be avoided in the clamping process. INTERPRETATION: As the clamping parameters increased, the strain, that is the deformation of the small intestine tissue increased. The increase in the deformation would induce the aggravation of trauma degree.
Assuntos
Intestino Delgado/fisiopatologia , Procedimentos Cirúrgicos Minimamente Invasivos/métodos , Instrumentos Cirúrgicos , Animais , Constrição , Inflamação , Laparoscopia , Masculino , Coelhos , Estresse Mecânico , Ferimentos e LesõesRESUMO
Suture broken, knot slipping and tissue tearing are the main reasons of wound closure failure in clinical operation. Based on this, we simulated the suturing and healing operation by using a biological materials testing machine and investigated the tensile properties before and after knotting, relaxation property and friction property of three common sutures: silk, polyglactin 910 and polypropylene. Results show that the tensile property decreased after knotting. The tensile strength of polyglactin 910 and elongation of polypropylene were the largest. During the relaxation process, the sutures relaxed the most in the first 2 hours. The relaxation from less to more was: polyglactin 910, silk and polypropylene. Coating or monofilament could obviously reduce the surface roughness of sutures, and thus reduce the friction force of the suture-suture interface. The friction force of the suture-suture interface increased with the increasing load but did no change with the increasing velocity. The results can provide an important theoretical basis for the optimizations of suture design and knotting operation.
Assuntos
Teste de Materiais , Técnicas de Sutura , Suturas , Fricção , Poliglactina 910 , Polipropilenos , Seda , Resistência à TraçãoRESUMO
The aim of this study is to investigate the effect of calcium ions on the adsorption and lubrication behavior of salivary proteins on human tooth enamel. Human whole saliva was collected from healthy donors. Three testing groups were calcium ion-enhanced saliva samples with an increased ion concentration of 1â¯mmol/L, 5â¯mmol/L, and 10â¯mmol/L, respectively. Normal saliva was used as a control. The adsorption behavior was tested using quartz crystal microbalance with dissipation (QCM-D), while the mechanical properties and lubricating behavior of salivary pellicle were examined by nano-indentation/scratch technique. Results show that the increased calcium ion concentration in the saliva weakens the electrostatic interaction between the salivary proteins and enamel surface, but causes increases in the thickness and viscoelasticity of the salivary pellicle formed on enamel surface. Therefore, the load-bearing and anti-shear capacity of the pellicle is improved, and then the anti-wear and friction-reducing effect of the pellicle is enhanced. In sum, the addition of calcium ion in saliva can contribute to the formation of the salivary pellicle with enhanced lubrication performance and help to alleviate the excessive tooth wear of xerostomia patients.
Assuntos
Cálcio/farmacologia , Esmalte Dentário/química , Esmalte Dentário/efeitos dos fármacos , Proteínas e Peptídeos Salivares/química , Proteínas e Peptídeos Salivares/metabolismo , Adsorção/efeitos dos fármacos , Adulto , Fenômenos Biomecânicos/efeitos dos fármacos , Cálcio/química , Esmalte Dentário/metabolismo , Humanos , Masculino , Propriedades de Superfície , Adulto JovemRESUMO
Cam mechanism is widely applied in industry because it can help achieve various complex motions of the follower via the cam contour design. However, its performance is significantly affected by the wear condition. This study proposes a load distribution measurement instrument to assist the study on friction and wear regularities of oscillating follower cam mechanisms through obtaining the normal pressure (F) and friction force (Ff) distributions along the cam profile. In the instrument, F and Ff are automatically calculated via a MATLAB program based on the geometry and the measured rotary resistance torque and rotary angle of the cam. The latter two parameters are obtained through a static torque sensor and a rotary encoder built in servo motor in real time, respectively. An experimental test was conducted and the cam morphology after service was observed using scanning electron microscopy. Results show that the wear condition of the cam is significantly related to the corresponding F and Ff. Complex load parameters of oscillating follower cam mechanisms can be provided by this instrument, which is crucial in understanding the friction and wear behaviors of cams and finding the vulnerable position.
RESUMO
[This corrects the article DOI: 10.1098/rsos.181376.].
RESUMO
The relationship between the microstructure and tribological behavior of mammalian tooth enamel has not been fully understood. In this paper, the microstructure, mechanical properties, and tribological behavior of canine (carnivore) and bovine (herbivore) enamel are studied using scanning electronic microscopy and nano-indentation/scratch technique, aiming to reveal the contribution of enamel microstructure to its mechanical and tribological properties. Canine enamel has a microstructure of hard keyhole-like rods embedded in soft inter-rod enamel, and its surface exhibits high resistance against both micro-crack initiation and crack-induced delamination during friction and wear process. Bovine enamel with the microstructure consisting of the hydroxyapatite (HAP) nano-fibers in decussation has higher surface hardness and better capabilities of resisting wear and encumbering crack propagation, as compared to canine enamel. In sum, the soft inter-rod enamel in the canine enamel contributes to high load tolerance and then protects enamel surface from brittle damage, while the staggered arrangement of HAP nano-fibers benefits hard bovine enamel in crack propagation resistance and then help resist wear and fatigue. The findings suggest that there exists a self-adaptation in enamel microstructure and tribological performance of mammals with their feeding habits, which will promote and assist the bionic design of high-performance materials.
Assuntos
Esmalte Dentário/citologia , Fenômenos Mecânicos , Animais , Fenômenos Biomecânicos , Bovinos , CãesRESUMO
Generally minimally invasive surgery is performed using an endoscope and other instruments including electrosurgical units (ESUs), and the adhesion of tissue to electrodes is a major concern. The mechanism governing this tissue sticking, especially the influence of high-frequency electric field, is still unclear. In this study, the effect of high-frequency electric field on the tissue sticking upon electrodes was investigated. The electrosurgical cutting test was performed on ex vivo fresh porcine liver under blend mode using a monopolar ESU. A heat-adherence test without electric field was used as a control. For the control group, the electrode was heated and maintained at a certain temperature and directly in contact with porcine liver. Both sticking tissues obtained from these two tests are partially carbonized porcine liver tissue, but their microstructure and bonding with electrode are obviously different. The sticking tissue formed just under heat is composed of biggish nanoparticles of different sizes which are loosely aggregated and has a weak bonding with the electrode, while the sticking tissue from the electrosurgical cutting test consists of tightly packed fine nanoparticles of equable size as a result of thermo-electric coupling and has a strong bonding with the electrode. Obviously, high-frequency electric field plays an extremely important role in the formation of the sticking tissue. It is the thermo-electric coupling that underlies the function of minimally invasive electrosurgical devices, and the effect of high-frequency electric field cannot be ignored in the tissue sticking study and anti-sticking strategies.
RESUMO
The large force applied by laparoscopic grasper during clamping operation can cause tissue damage and induce various complications. In this research, the security of graspers with different radii of curvature and teeth were evaluated by using experimental investigation, finite element simulation and tissue damage assessment method based on in vivo compression tests with rabbit large intestines models. Results showed that the most serious tissue damages appeared in areas that were in contact with the jaw edges, which were the regions of stress concentration. The increase in radii of curvature of the edges or teeth could alleviate the tissue damages. The results could provide basic data for choosing and designing noninvasive graspers.
RESUMO
Tooth enamel is a distinctive nanocomposite with a highly organized hierarchical structure made of nanometer- and micrometer-scale building blocks. This structure has an excellent mechanical function that can last for decades thanks to an effective but underexploited interfacial chemical bonding between the building blocks. In this study, the nanomechanical system test (NST), scanning electron microscope (SEM), X-ray diffraction (XRD, including powder XRD or PXRD, small angle XRD or SAXRD, and grazing incidence small angle XRD or GISAXRD), and atomic force microscope (AFM) have been employed to analyze the water-mediated bonding on the enamel surface. Via the cycling between hydration, dehydration, and rehydration treatments, a reversible change in the interfacial distance (i.e., d-space in the XRD pattern) between hydroxyapatite (HAP) nanocrystallites have been found switchable between the embrittling and toughening on the enamel surface. From the hydrated to the dehydrated conditions, an energy dissipation to deform a unit volume (1 µm3) of biocomposite on the enamel surface and subsurface has decreased by 20%. This finding can help quantify and predict biomineral-surface properties in all humidity and develop new methods to protect tooth enamel of "dry-mouth" patients.
RESUMO
The nanoscale responses of teeth to chewing loads are poorly understood. This has contributed to debate concerning the aetiology of enamel wear and resistance to fracture. Here we develop a new model for reactions of individual hydroxyapatite nanofibres to varying loads and directions of force. Hydroxyapatite nanofibres, or crystallites, composed of chains of bonded nanospheres, are the fundamental building blocks of enamel. This study indicates that these nanofibres respond to contact pressure in three distinct ways depending on force magnitude and direction: (i) plucking (nanosphere loss when the strength of the bonding protein 'glue' is exceeded), (ii) plastic deformation (compression to gradually bend nanofibres and squeeze the protein layer), and (iii) fragmentation (nanofibres fracture when the strength of H-bonds that bind smaller nanoparticles into nanospheres is exceeded). Critical contact pressure to initiate plucking is the lowest, followed by plastic deformation, and then fragmentation. Further, lower contact pressures are required for a response with shear forces applied perpendicular to the long axes of crystallites than with crushing forces parallel to them alone. These nanoscale responses are explained as a function of the interfacial nanochemical bonding between and within individual crystallites. In other words, nanochemistry plays a critical role in the responses of enamel to varying chewing loads.
Assuntos
Esmalte Dentário/fisiologia , Mastigação/fisiologia , Dente Molar/fisiologia , Fenômenos Biomecânicos , Força de Mordida , HumanosRESUMO
This study was to investigate the salivary pellicle formation on the surface of human tooth enamel and its lubricating behavior under alcohol stimulation. Normal saliva and alcohol-stimulated saliva were collected from a young male volunteer after rinsing mouth with deionized water and different-concentration alcohol aqueous solution, respectively. Saliva-adsorption treatment was conducted in vitro on enamel surface to obtain salivary pellicle. Microscopic examinations and lubrication testing of salivary pellicle were performed by nanoscratch technology. Given that the pellicle lubricating properties are closely associated with its adhesion strength to substrates, the adhesion force between salivary pellicle and enamel was measured using an Atomic Force Microscopy. Compared with normal salivary pellicle, the salivary pellicle obtained from alcohol-stimulated saliva was not uniform anymore and even without any orderly multi-layer structure. Although alcohol stimulation improved the pellicle bonding to enamel surface, it caused the pellicle lubrication worse. In sum, the lubricating performance of salivary pellicle was more dependent on its orderly multi-layer structure from salivary protein self-assembly than its adhesion strength to enamel.