High throughput microfluidic nanobubble generation by microporous membrane integration and controlled bubble shrinkage.

Microfluidics has recently been proposed as a viable method for producing bulk nanobubbles for use in various applications. The portability, compact size, and capacity to precisely control fluids on a small scale are a few of the benefits of microfluidics that may be exploited to create customized bulk nanobubbles. However, despite the potential of microfluidic nanobubble generation, low throughput and limited nanobubble concentration remain challenging for microfluidics. Here, we integrate a microporous silicon membrane into a polydimethylsiloxane microfluidic chip to generate bulk nanobubbles in the 100-140 nm diameter range with a concentration of up to 108 mL-1. We investigate the nanobubble size and morphology using several characterisation techniques, including transmission electron microscopy, resonance mass measurement, dynamic light scattering, and the Tyndall effect. This new nanobubble generation technique can increase nanobubble concentration by âˆ¼ 23 times compared to earlier microfluidic nanobubble generation platforms, which should increase the feasibility of translation to medical applications.

Lernaeid parasites prevalence in commercial freshwater fish species at various fish farms in Pakistan

Abstract Reports abound on Lernaea parasitizing the brood stock, fingerlings, and marketable-sized culturable freshwater fish species in various parts of the world. We investigated seven small-scale aquaculture farms and how the prevailing Lernaea is impacting them. Randomly seven fish farms were selected to determine the prevalence percentage of lernaeid ectoparasites. Relevant information of the fishponds to estimate the various aspects such as effects of water source and quality, feed, stocking density, treatment used, and weight and length of fish, concerned with Lernaea infestation and prevalence was gathered. The results indicated that Catla catla (F. Hamilton, 1822) showed highest prevalence (41.7%) among the seven fish species, whereas Oreochromis niloticus showed zero. Other five fish species Ctenopharyngodon idella, Cirrhinus cirrhosis, Cyprinus carpio, Labeo rohita and Hypophthalmichthys molitrix showed 13.2%, 8.1%, 7.7%, 7.4%, 0.9% prevalence, respectively. In Royal Fish Farm 84.3% lernaeid infestation was observed, while no parasite was observed in the Vicents Chunnian fish farm. The water source, quality, feed, fertilizers, stocking density, water temperature, and potential treatment options displayed varying tendencies among fish farms and prevalence. Depending on the weight and length, the highest prevalence (56.7%, and 66.7%) was observed in 3501-4000 g and 81-90 cm groups. The infestation rate varied in various fish body parts with the dorsal fin the most vulnerable organ and showed 2.3% overall prevalence (while 18.4% contribution within total 12.6% infestation). Out of 147 infected fish samples, 45 were extensively contaminated by Lernaea spread. In conclusion, our findings confirm that Lernaea could pose a considerable threat to marketable fish, and various treatment options should be educated to the farmers to help mitigate the spread and potential losses. Furthermore, Catla catla is more vulnerable to Lernaea infestation (41.7%), so are the fish species being cultured at higher stocking densities.

Resumo Abundam os relatórios sobre Lernaea parasitando o estoque de cria, alevinos e espécies de peixes de água doce cultiváveis de tamanho comercial em várias partes do mundo. Investigamos sete fazendas de aquicultura de pequena escala e de que maneira a Lernaea predominante está impactando-as. Aleatoriamente, sete fazendas de peixes foram selecionadas para determinar a porcentagem de prevalência de ectoparasitas de Lernaea. Foram recolhidas informações relevantes sobre os viveiros de peixes para estimar os vários aspectos, tais como efeitos da fonte e qualidade da água, alimentação, densidade de povoamento, tratamento utilizado e peso e comprimento dos peixes, relacionados com a infestação e prevalência de Lernaea. Os resultados indicaram que Catla catla (F. Hamilton, 1822) apresentou maior prevalência (41,7%) entre as sete espécies de peixes, enquanto Oreochromis niloticus apresentou zero. Outras cinco espécies de peixes Ctenopharyngodon idella, Cirrhinus cirrhosis, Cyprinus carpio, Labeo rohita e Hypophthalmichthys molitrix apresentaram 13,2%, 8,1%, 7,7%, 7,4%, 0,9% de prevalência, respectivamente. Em Royal Fish Farm, 84,3% de infestação de Lernaea foi observada, enquanto não se observou nenhum parasita na fazenda de peixes Chunnian de Vicent. A fonte de água, qualidade, ração, fertilizantes, densidade de estocagem, temperatura da água e opções de tratamento potenciais exibiram tendências variadas entre as fazendas de peixes e prevalência. Dependendo do peso e comprimento, a maior prevalência (56,7% e 66,7%) foi observada nos grupos de 3501-4000 g e 81-90 cm. A taxa de infestação variou em várias partes do corpo dos peixes, sendo a nadadeira dorsal o órgão mais vulnerável e apresentou 2,3% de prevalência geral (enquanto 18,4% de contribuição dentro do total de 12,6% de infestação). Das 147 amostras de peixes infectados, 45 estavam amplamente contaminadas pela propagação de Lernaea. Em conclusão, nossos resultados confirmam que Lernaea pode representar uma ameaça considerável para peixes comercializáveis, e várias opções de tratamento devem ser educadas para os agricultores para ajudar a mitigar a propagação e as perdas potenciais. Além disso, Catla catla é mais vulnerável à infestação por Lernaea (41,7%), assim como as espécies de peixes sendo cultivadas em densidades de estocagem mais altas.

Environmental sustainability assessment of wooden furniture produced in Pakistan

Abstract Life cycle assessment was carried out for a conventional wooden furniture set produced in Mardan division of the Khyber Pakhtunkhwa province of Pakistan during 2018-19. Primary data regarding inputs and outputs were collected through questionnaire surveys from 100 conventional wooden furniture set manufacturers, 50 in district Mardan and 50 in district Swabi. In the present study, cradle-to-gate life cycle assessment approach was applied for a functional unit of one conventional wooden furniture set. Production weighted average data were modelled in the environmental impacts modelling software i.e., SimaPro v.8.5. The results showed that textile used in sofa set, wood preservative for polishing and preventing insects attack and petrol used in generator had the highest contribution to all the environmental impact categories evaluated. Total cumulative energy demand for wooden furniture set manufactured was 30,005 MJ with most of the energy acquired from non-renewable fossil fuel resources.

Resumo A abordagem de avaliação do ciclo de vida foi realizada para um conjunto de móveis de madeira convencional produzido na divisão Mardan da província de Khyber Pakhtunkhwa do Paquistão durante 2018-19. Os dados primários sobre entradas e saídas foram coletados por meio de pesquisas por questionário de 100 fabricantes de conjuntos de móveis de madeira convencionais, 50 no distrito de Mardan e 50 no distrito de Swabi. No presente estudo, a abordagem de avaliação do ciclo de vida do berço ao portão foi aplicada para uma unidade funcional de um conjunto de móveis de madeira convencional. Os dados da média ponderada da produção foram modelados no software de modelagem de impactos ambientais, isto é, SimaPro v.8.5. Os resultados mostraram que os têxteis usados no conjunto de sofás, o preservativo de madeira para polir e prevenir o ataque de insetos e a gasolina usada no gerador tiveram a maior contribuição em todas as categorias de impacto ambiental avaliadas. A demanda total acumulada de energia para o conjunto de móveis de madeira fabricado foi de 30.005 MJ, com a maior parte da energia adquirida de recursos de combustíveis fósseis não renováveis.

Effects of Se nanoparticles supplementation on growth performance, hematological parameters and nutrient digestibility of Labeo rohita fingerling fed sunflower meal based diet

Abstract The aim of the present study is to assess the effects of selenium nanoparticles on the growth, hematology and nutrients digestibility of Labeorohita fingerlings. Fingerlings were fed with seven isocaloric sunflower meal-based diet supplemented with different concentrations of nanoparticles naming T1 to T7 (0, 0.5, 1, 1.5, 2, 2.5, and 3 mg/kg), with 5% wet body weight while chromic oxide was used as an indigestible marker. After experimentation for 90 days T3 treated group (1mg/kg -1Se-nano level) showed the best result in hematological parameters (WBCs 7.97 ×103mm-3, RBCs 2.98 ×106 mm-3 and Platelet count 67), nutrient digestibility (crude protein: 74%, ether extract: 76%, gross energy: 70%) and growth performance (weight gain 13.24 g, weight gain% 198, feed conversion ratio 1.5, survival rate 100%) as compared to the other treatment groups. Specific growth rates were found significantly higher in T5 than in other groups. The present study indicated positive effect of 1 mg/kg Se-nanoparticles on growth advancement, hematological parameters, and nutrients digestibility of L. rohita fingerlings.

Resumo O objetivo do presente estudo é avaliar os efeitos das nanopartículas de selênio no crescimento, hematologia e digestibilidade dos nutrientes de alevinos de Labeo rohita. Os alevinos foram alimentados com sete dietas isocalóricas à base de farinha de girassol suplementada com diferentes concentrações de nanopartículas, nomeando T1 a T7 (0, 0,5, 1, 1,5, 2, 2,5 e 3 mg / kg), com 5% do peso corporal úmido enquanto o óxido crômico foi usado como um marcador indigesto. Após a experimentação por 90 dias, o grupo tratado com T3 (nível 1mg / kg -1Se-nano) mostrou o melhor resultado em parâmetros hematológicos (WBCs 7,97 × 103mm-3, RBCs 2,98 × 106mm-3 e contagem de plaquetas 67), digestibilidade dos nutrientes (proteína bruta: 74%, extrato de éter: 76%, energia bruta: 70%) e desempenho de crescimento (ganho de peso 13,24 g, ganho de peso % 198, taxa de conversão alimentar 1,5, taxa de sobrevivência 100%) em comparação com os outros grupos de tratamento. As taxas de crescimento específicas foram encontradas significativamente mais altas em T5 do que em outros grupos. O presente estudo indicou efeito positivo de 1 mg / kg de nanopartículas de Se no avanço do crescimento, parâmetros hematológicos e digestibilidade de nutrientes de alevinos de L. rohita.

Variations in soil physico-chemical properties, soil stocks, and soil stoichiometry under different soil layers, the major forest region Liupan Mountains of Northwest China

Abstract Liupan Mountains are an important region in China in the context of forest cover and vegetation due to huge afforestation and plantation practices, which brought changes in soil physio-chemical properties, soil stocks, and soil stoichiometries are rarely been understood. The study aims to explore the distribution of soil nutrients at 1-m soil depth in the plantation forest region. The soil samples at five depth increments (0-20, 20-40, 40-60, 60-80, and 80-100 cm) were collected and analyzed for different soil physio-chemical characteristics. The results showed a significant variation in soil bulk density (BD), soil porosity, pH, cation exchange capacity (CEC), and electric conductivity (EC) values. More soil BD (1.41 g cm-3) and pH (6.97) were noticed in the deep soil layer (80-100 cm), while the highest values of porosity (60.6%), EC (0.09 mS cm-1), and CEC (32.9 c mol kg-1) were reflected in the uppermost soil layer (0-20 cm). Similarly, the highest contents of soil organic carbon (SOC), total phosphorus (TP), available phosphorus (AP), total nitrogen (TN), and available potassium (AK) were calculated in the surface soil layer (0-20 cm). With increasing soil depth increment a decreasing trend in the SOC and other nutrient concentration were found, whereas the soil total potassium (TK) produced a negative correlation with soil layer depth. The entire results produced the distribution of SOCs and TNs (stocks) at various soil depths in forestland patterns were 020cm > 2040cm > 4060cm 6080cm 80100 cm. Furthermore, the stoichiometric ratios of C, N, and P, the C/P, and N/P ratios showed maximum values (66.49 and 5.46) in 0-20 cm and lowest values (23.78 and 1.91) in 80-100 cm soil layer depth. Though the C/N ratio was statistically similar across the whole soil profile (0-100 cm). These results highlighted that the soil depth increments might largely be attributed to fluctuations in soil physio-chemical properties, soil stocks, and soil stoichiometries. Further study is needed to draw more conclusions on nutrient dynamics, soil stocks, and soil stoichiometry in these forests.

Resumo As montanhas de Liupan são uma região importante na China no contexto de cobertura florestal e vegetação devido às enormes práticas de florestamento e plantação, que trouxeram mudanças nas propriedades físico-químicas do solo, e estoques e estequiometrias do solo raramente são compreendidos. O estudo visa explorar a distribuição de nutrientes do solo a 1 m de profundidade do solo na região da floresta plantada. As amostras de solo em cinco incrementos de profundidade (0-20, 20-40, 40-60, 60-80 e 80-100 cm) foram coletadas e analisadas para diferentes características físico-químicas do solo. Os resultados mostraram uma variação significativa nos valores de densidade do solo (BD), porosidade do solo, pH, capacidade de troca catiônica (CEC) e condutividade elétrica (CE). Mais DB do solo (1,41 g cm-3) e pH (6,97) do solo foram observados na camada profunda do solo (80-100 cm), enquanto os maiores valores de porosidade (60,6%), CE (0,09 mS cm-1) e CEC (32,9 c mol kg-1) foram refletidos na camada superior do solo (0-20 cm). Da mesma forma, os maiores teores de carbono orgânico do solo (SOC), fósforo total (TP), fósforo disponível (AP), nitrogênio total (TN) e potássio disponível (AK) foram calculados na camada superficial do solo (0-20 cm). Com o aumento do incremento da profundidade do solo, uma tendência decrescente no SOC e na concentração de outros nutrientes foi encontrada, enquanto o potássio total do solo (TK) produziu uma correlação negativa com a profundidade da camada do solo. Todos os resultados produziram a distribuição de SOCs e TNs (estoques) em várias profundidades de solo em padrões de floresta 0 20cm> 20 40cm> 40 60cm 60 80cm 80 100 cm. Além disso, as relações estequiométricas de C, N e P, as relações C / P e N / P, apresentaram valores máximos (66,49 e 5,46) em 0-20 cm, e valores mais baixos (23,78 e 1,91) em solo de 80-100 cm profundidade da camada. Embora a relação C / N fosse estatisticamente semelhante em todo o perfil do solo (0-100 cm). Esses resultados destacaram que os incrementos de profundidade do solo podem ser amplamente atribuídos a flutuações nas propriedades físico-químicas do solo, estoques e estequiometrias do solo. Mais estudos são necessários para tirar conclusões adicionais sobre a dinâmica dos nutrientes, estoques de solo e estequiometria do solo nessas florestas.

Assessment of particulate matter (PM) in ambient air of different settings and its associated health risk in Haripur city, Pakistan

Abstract Particulate matter (PM) is a major air pollutant causing serious health problems. The aim of the present study was to find out concentration of PM in ambient air and its associated health risk in Haripur city, Pakistan. Twenty-three samples were taken at various educational institutes, hospitals, recreational areas and industries in Haripur city. Concentration of PM2.5 (µg/m3) and PM10 (µg/m3) was measured with Youngteng YT-HPC 3000A portable PM counter. The results revealed that values of both PM2.5 and PM10 were above the permissible limits (35 µg/m3 for PM2.5 and 150 µg/m3 for PM10) set by Environmental Protection Agency Pakistan (Pak-EPA) in all the educational institutes, hospitals, recreational areas and industries investigated. Furthermore, significant (p 0.05) variation was found in the concentration of both PM2.5 and PM10 in all the educational institutes, hospitals, recreational areas, and industries studied. The concentration of PM2.5 was positively correlated with the concentration of PM10 in all the sampling sites. Therefore, from 1-14 scale standard of health index, the values of PM2.5 and PM10 exhibited that the ambient air quality of Haripur city Pakistan is under high risk. If the regulatory authorities such as Environmental Protection Agency, Health Department and Local Government monitor PM pollution in different settings of Haripur city, then a decrease can be possible in the pollution level. The remedies that can be taken to overcome the problem of ambient air pollution such as PM are plantation of trees at the sites where there are higher levels of air pollutants and use of masks on personal protection basis along with implementation of pollution control system in industries of Hattar Industrial Estate Haripur city, Pakistan.

Resumo O material particulado (MP) é um importante poluente do ar que causa sérios problemas de saúde. O objetivo do presente estudo foi descobrir a concentração de MP no ar ambiente e sua associação com o risco à saúde na cidade de Haripur, Paquistão. Vinte e três amostras foram coletadas em várias instituições de ensino, hospitais, áreas recreativas e indústrias na cidade de Haripur. A concentração de MP2,5 (µg/m3) e MP10 (µg/m3) foi medida por meio do contador de MP portátil Youngteng YT-HPC 3000A. Os resultados revelaram que os valores de MP2,5 e MP10 estavam acima dos limites permitidos (35 µg/m3 para MP2,5 e 150 µg/m3 para MP10) estabelecidos pela Agência de Proteção Ambiental do Paquistão (Pak-EPA) em todas as instituições de ensino, hospitais, áreas recreativas e indústrias investigadas. Além disso, foi encontrada variação significativa (p 0,05) na concentração de MP2,5 e MP10 em todos os locais estudados. A concentração de MP2,5 correlacionou-se positivamente com a concentração de MP10 em todos os locais de amostragem. Portanto, a partir da escala padrão 1-14 do índice de saúde, os valores de MP2,5 e MP10 mostraram que a qualidade do ar ambiente na cidade de Haripur, Paquistão, está sob alto risco. Se as autoridades reguladoras, como a Pak-EPA, o Departamento de Saúde e o governo local, monitorarem a poluição por MP em diferentes configurações da cidade de Haripur, pode ser que haja uma diminuição no nível de poluição. As medidas que podem ser tomadas para superar o problema da poluição do ar ambiente, como o MP, são o plantio de árvores nos locais onde há maiores níveis de poluentes atmosféricos, o uso de máscaras e a implantação de sistema de controle de poluição nas propriedades industriais de Hattar, na cidade Haripur, Paquistão.

Effects of Se nanoparticles supplementation on growth performance, hematological parameters and nutrient digestibility of Labeo rohita fingerling fed sunflower meal based diet / Efeitos da suplementação de nanopartículas de Se no desempenho de crescimento, parâmetros hematológicos e digestibilidade de nutrientes da dieta baseada em farinha de girassol alimentada com alevinos de Labeo rohita

Abstract The aim of the present study is to assess the effects of selenium nanoparticles on the growth, hematology and nutrients digestibility of Labeorohita fingerlings. Fingerlings were fed with seven isocaloric sunflower meal-based diet supplemented with different concentrations of nanoparticles naming T1 to T7 (0, 0.5, 1, 1.5, 2, 2.5, and 3 mg/kg), with 5% wet body weight while chromic oxide was used as an indigestible marker. After experimentation for 90 days T3 treated group (1mg/kg -1Se-nano level) showed the best result in hematological parameters (WBC's 7.97 ×103mm-3, RBC's 2.98 ×106 mm-3 and Platelet count 67), nutrient digestibility (crude protein: 74%, ether extract: 76%, gross energy: 70%) and growth performance (weight gain 13.24 g, weight gain% 198, feed conversion ratio 1.5, survival rate 100%) as compared to the other treatment groups. Specific growth rates were found significantly higher in T5 than in other groups. The present study indicated positive effect of 1 mg/kg Se-nanoparticles on growth advancement, hematological parameters, and nutrients digestibility of L. rohita fingerlings.

Resumo O objetivo do presente estudo é avaliar os efeitos das nanopartículas de selênio no crescimento, hematologia e digestibilidade dos nutrientes de alevinos de Labeo rohita. Os alevinos foram alimentados com sete dietas isocalóricas à base de farinha de girassol suplementada com diferentes concentrações de nanopartículas, nomeando T1 a T7 (0, 0,5, 1, 1,5, 2, 2,5 e 3 mg / kg), com 5% do peso corporal úmido enquanto o óxido crômico foi usado como um marcador indigesto. Após a experimentação por 90 dias, o grupo tratado com T3 (nível 1mg / kg -1Se-nano) mostrou o melhor resultado em parâmetros hematológicos (WBC's 7,97 × 103mm-3, RBC's 2,98 × 106mm-3 e contagem de plaquetas 67), digestibilidade dos nutrientes (proteína bruta: 74%, extrato de éter: 76%, energia bruta: 70%) e desempenho de crescimento (ganho de peso 13,24 g, ganho de peso % 198, taxa de conversão alimentar 1,5, taxa de sobrevivência 100%) em comparação com os outros grupos de tratamento. As taxas de crescimento específicas foram encontradas significativamente mais altas em T5 do que em outros grupos. O presente estudo indicou efeito positivo de 1 mg / kg de nanopartículas de Se no avanço do crescimento, parâmetros hematológicos e digestibilidade de nutrientes de alevinos de L. rohita.

Environmental sustainability assessment of wooden furniture produced in Pakistan / Avaliação da sustentabilidade ambiental de móveis de madeira produzidos no Paquistão

Abstract Life cycle assessment was carried out for a conventional wooden furniture set produced in Mardan division of the Khyber Pakhtunkhwa province of Pakistan during 2018-19. Primary data regarding inputs and outputs were collected through questionnaire surveys from 100 conventional wooden furniture set manufacturers, 50 in district Mardan and 50 in district Swabi. In the present study, cradle-to-gate life cycle assessment approach was applied for a functional unit of one conventional wooden furniture set. Production weighted average data were modelled in the environmental impacts modelling software i.e., SimaPro v.8.5. The results showed that textile used in sofa set, wood preservative for polishing and preventing insects attack and petrol used in generator had the highest contribution to all the environmental impact categories evaluated. Total cumulative energy demand for wooden furniture set manufactured was 30,005 MJ with most of the energy acquired from non-renewable fossil fuel resources.

Resumo A abordagem de avaliação do ciclo de vida foi realizada para um conjunto de móveis de madeira convencional produzido na divisão Mardan da província de Khyber Pakhtunkhwa do Paquistão durante 2018-19. Os dados primários sobre entradas e saídas foram coletados por meio de pesquisas por questionário de 100 fabricantes de conjuntos de móveis de madeira convencionais, 50 no distrito de Mardan e 50 no distrito de Swabi. No presente estudo, a abordagem de avaliação do ciclo de vida do berço ao portão foi aplicada para uma unidade funcional de um conjunto de móveis de madeira convencional. Os dados da média ponderada da produção foram modelados no software de modelagem de impactos ambientais, isto é, SimaPro v.8.5. Os resultados mostraram que os têxteis usados ​​no conjunto de sofás, o preservativo de madeira para polir e prevenir o ataque de insetos e a gasolina usada no gerador tiveram a maior contribuição em todas as categorias de impacto ambiental avaliadas. A demanda total acumulada de energia para o conjunto de móveis de madeira fabricado foi de 30.005 MJ, com a maior parte da energia adquirida de recursos de combustíveis fósseis não renováveis.

Variations in soil physico-chemical properties, soil stocks, and soil stoichiometry under different soil layers, the major forest region Liupan Mountains of Northwest China / Variações nas propriedades físico-químicas do solo, estoques e estequiometria do solo sob diferentes camadas de solo, a principal região florestal das montanhas Liupan do noroeste da China

Liupan Mountains are an important region in China in the context of forest cover and vegetation due to huge afforestation and plantation practices, which brought changes in soil physio-chemical properties, soil stocks, and soil stoichiometries are rarely been understood. The study aims to explore the distribution of soil nutrients at 1-m soil depth in the plantation forest region. The soil samples at five depth increments (0-20, 20-40, 40-60, 60-80, and 80-100 cm) were collected and analyzed for different soil physio-chemical characteristics. The results showed a significant variation in soil bulk density (BD), soil porosity, pH, cation exchange capacity (CEC), and electric conductivity (EC) values. More soil BD (1.41 g cm-3) and pH (6.97) were noticed in the deep soil layer (80-100 cm), while the highest values of porosity (60.6%), EC (0.09 mS cm-1), and CEC (32.9 c mol kg-1) were reflected in the uppermost soil layer (0-20 cm). Similarly, the highest contents of soil organic carbon (SOC), total phosphorus (TP), available phosphorus (AP), total nitrogen (TN), and available potassium (AK) were calculated in the surface soil layer (0-20 cm). With increasing soil depth increment a decreasing trend in the SOC and other nutrient concentration were found, whereas the soil total potassium (TK) produced a negative correlation with soil layer depth. The entire results produced the distribution of SOCs and TNs (stocks) at various soil depths in forestland patterns were 0→20cm > 20→40cm > 40→60cm ≥ 60→80cm ≥ 80→100 cm. Furthermore, the stoichiometric ratios of C, N, and P, the C/P, and N/P ratios showed maximum values (66.49 and 5.46) in 0-20 cm and lowest values (23.78 and 1.91) in 80-100 cm soil layer depth. Though the C/N ratio was statistically similar across the whole soil profile (0-100 cm). These results highlighted that the soil depth increments might largely be attributed to fluctuations in soil physio-chemical properties, soil stocks, and soil stoichiometries. Further study is needed to draw more conclusions on nutrient dynamics, soil stocks, and soil stoichiometry in these forests.

As montanhas de Liupan são uma região importante na China no contexto de cobertura florestal e vegetação devido às enormes práticas de florestamento e plantação, que trouxeram mudanças nas propriedades físico-químicas do solo, e estoques e estequiometrias do solo raramente são compreendidos. O estudo visa explorar a distribuição de nutrientes do solo a 1 m de profundidade do solo na região da floresta plantada. As amostras de solo em cinco incrementos de profundidade (0-20, 20-40, 40-60, 60-80 e 80-100 cm) foram coletadas e analisadas para diferentes características físico-químicas do solo. Os resultados mostraram uma variação significativa nos valores de densidade do solo (BD), porosidade do solo, pH, capacidade de troca catiônica (CEC) e condutividade elétrica (CE). Mais DB do solo (1,41 g cm-3) e pH (6,97) do solo foram observados na camada profunda do solo (80-100 cm), enquanto os maiores valores de porosidade (60,6%), CE (0,09 mS cm-1) e CEC (32,9 c mol kg-1) foram refletidos na camada superior do solo (0-20 cm). Da mesma forma, os maiores teores de carbono orgânico do solo (SOC), fósforo total (TP), fósforo disponível (AP), nitrogênio total (TN) e potássio disponível (AK) foram calculados na camada superficial do solo (0-20 cm). Com o aumento do incremento da profundidade do solo, uma tendência decrescente no SOC e na concentração de outros nutrientes foi encontrada, enquanto o potássio total do solo (TK) produziu uma correlação negativa com a profundidade da camada do solo. Todos os resultados produziram a distribuição de SOCs e TNs (estoques) em várias profundidades de solo em padrões de floresta 0 → 20cm> 20 → 40cm> 40 → 60cm ≥ 60 → 80cm ≥ 80 → 100 cm. Além disso, as relações estequiométricas de C, N e P, as relações C / P e N / P, apresentaram valores máximos (66,49 e 5,46) em 0-20 cm, e valores mais baixos (23,78 e 1,91) em solo de 80-100 cm profundidade da camada. Embora a relação C / N fosse estatisticamente semelhante em todo o perfil do solo (0-100 cm). Esses resultados destacaram que os incrementos de profundidade do solo podem ser amplamente atribuídos a flutuações nas propriedades físico-químicas do solo, estoques e estequiometrias do solo. Mais estudos são necessários para tirar conclusões adicionais sobre a dinâmica dos nutrientes, estoques de solo e estequiometria do solo nessas florestas.

Assessment of particulate matter (PM) in ambient air of different settings and its associated health risk in Haripur city, Pakistan / Avaliação de material particulado (MP) no ar ambiente de diferentes configurações e sua associação com o risco à saúde na cidade de Haripur, Paquistão

Particulate matter (PM) is a major air pollutant causing serious health problems. The aim of the present study was to find out concentration of PM in ambient air and its associated health risk in Haripur city, Pakistan. Twenty-three samples were taken at various educational institutes, hospitals, recreational areas and industries in Haripur city. Concentration of PM2.5 (µg/m3) and PM10 (µg/m3) was measured with Youngteng YT-HPC 3000A portable PM counter. The results revealed that values of both PM2.5 and PM10 were above the permissible limits (35 µg/m3 for PM2.5 and 150 µg/m3 for PM10) set by Environmental Protection Agency Pakistan (Pak-EPA) in all the educational institutes, hospitals, recreational areas and industries investigated. Furthermore, significant (p<0.05) variation was found in the concentration of both PM2.5 and PM10 in all the educational institutes, hospitals, recreational areas, and industries studied. The concentration of PM2.5 was positively correlated with the concentration of PM10 in all the sampling sites. Therefore, from 1-14 scale standard of health index, the values of PM2.5 and PM10 exhibited that the ambient air quality of Haripur city Pakistan is under high risk. If the regulatory authorities such as Environmental Protection Agency, Health Department and Local Government monitor PM pollution in different settings of Haripur city, then a decrease can be possible in the pollution level. The remedies that can be taken to overcome the problem of ambient air pollution such as PM are plantation of trees at the sites where there are higher levels of air pollutants and use of masks on personal protection basis along with implementation of pollution control system in industries of Hattar Industrial Estate Haripur city, Pakistan.

O material particulado (MP) é um importante poluente do ar que causa sérios problemas de saúde. O objetivo do presente estudo foi descobrir a concentração de MP no ar ambiente e sua associação com o risco à saúde na cidade de Haripur, Paquistão. Vinte e três amostras foram coletadas em várias instituições de ensino, hospitais, áreas recreativas e indústrias na cidade de Haripur. A concentração de MP2,5 (µg/m3) e MP10 (µg/m3) foi medida por meio do contador de MP portátil Youngteng YT-HPC 3000A. Os resultados revelaram que os valores de MP2,5 e MP10 estavam acima dos limites permitidos (35 µg/m3 para MP2,5 e 150 µg/m3 para MP10) estabelecidos pela Agência de Proteção Ambiental do Paquistão (Pak-EPA) em todas as instituições de ensino, hospitais, áreas recreativas e indústrias investigadas. Além disso, foi encontrada variação significativa (p < 0,05) na concentração de MP2,5 e MP10 em todos os locais estudados. A concentração de MP2,5 correlacionou-se positivamente com a concentração de MP10 em todos os locais de amostragem. Portanto, a partir da escala padrão 1-14 do índice de saúde, os valores de MP2,5 e MP10 mostraram que a qualidade do ar ambiente na cidade de Haripur, Paquistão, está sob alto risco. Se as autoridades reguladoras, como a Pak-EPA, o Departamento de Saúde e o governo local, monitorarem a poluição por MP em diferentes configurações da cidade de Haripur, pode ser que haja uma diminuição no nível de poluição. As medidas que podem ser tomadas para superar o problema da poluição do ar ambiente, como o MP, são o plantio de árvores nos locais onde há maiores níveis de poluentes atmosféricos, o uso de máscaras e a implantação de sistema de controle de poluição nas propriedades industriais de Hattar, na cidade Haripur, Paquistão.

The neglected continuously emerging Marburg virus disease in Africa: A global public health threat.

Background and Aim: Severe viral hemorrhagic fever (VHF) is caused by Marburg virus which is a member of the Filoviridae (filovirus) family. Many Marburg virus disease (MVD) outbreaks are reported in five decades. A major notable outbreak with substantial reported cases of infections and deaths was in 2022 in Uganda. The World Health Organisation (WHO) reported MVD outbreak in Ghana in July 2022 following the detection of two probable VHF patients there. Further, the virus was reported from two other African countries, the Equatorial Guinea (February 2023) and Tanzania (March 2023). There have been 35 deaths out of 40 reported cases in Equatorial Guinea, and six of the nine confirmed cases in Tanzania so far. Methods: Data particularly on the several MVD outbreaks as reported from the African countries were searched on various databases including the Pubmed, Scopus, and Web-of-science. Also, the primary data and reports from health agencies like the WHO and the Centers for Disease Control and Prevention CDC) were evaluated and the efficacy reviewed. Results: Chiroptera in general and bat species like Rousettus aegyptiacus and Hipposideros caffer in particular are natural reservoirs of the Marburg virus. MVD-infected nonhuman primate African fruit-bat and the MVD-infected humans pose significant risk in human infections. Cross-border viral transmission and its potential further international ramification concerns raise the risk of its rapid spread and a potential outbreak. Occurrence of MVD is becoming more frequent in Africa with higher case fatality rates. Effective prophylactic and therapeutic interventions to counter this deadly virus are suggested. Conclusion: In the face of the lack of effective therapeutics and preventives against MVD, supportive care is the only available option which contributes to the growing concern and disease severity. In view of the preventive approaches involving effective surveillance and monitoring system following the "One Health" model is extremely beneficial to ensure a healthy world for all, this article aims at emphasizing several MVD outbreaks, epidemiology, zoonosis of the virus, current treatment strategies, risk assessments, and the mitigation strategies against MVD.

Adherence to Healthy or Unhealthy Pro-Vegetarian Plant-Based Diets Have Different Impact on Prostate Cancer Severity: Preliminary Findings.

Prostate cancer (PCa) is a prevalent malignancy affecting men worldwide, and plant-based diets have been widely advocated for their health benefits. The aim of this study was to test the association between general, healthy, and unhealthy pro-vegetarian plant-based diets and PCa severity on 118 consecutive patients undergoing prostatectomy in a university hospital in Italy. Food frequency questionnaires were used to calculate scores for dietary patterns. Multivariate logistic regression analyses were used to calculate odds ratios (ORs) and 95% confidence intervals (CIs) to test the associations. A general plant-based diet was not associated with cancer severity, while patients reporting a higher adherence to a healthy plant-based diet were less likely to have a more severe PCa (for medium/high vs. low-risk PCa, OR = 0.27, 95% CI: 0.08, 0.88; for high vs. medium/low-risk PCa, OR = 0.09, 95% CI: 0.02, 0.39). Patients resulting in higher adherence to an unhealthy plant-based diet were more likely to be diagnosed with more severe PCa (OR = 6.15, 95% CI: 1.70, 22.24). In conclusion, plant-based dietary patterns may have a different impact on PCa severity depending on the quality of the foods included.

Pooled rates and demographics of POTS following SARS-CoV-2 infection versus COVID-19 vaccination: Systematic review and meta-analysis.

PURPOSE: To address recent concerns of postural orthostatic tachycardia syndrome (POTS) occurring after severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection and coronavirus disease 2019 (COVID-19) vaccination. METHODS: We searched PubMed, Web of Science, and Scopus as of 1st June 2023. We performed a systematic review and meta-analysis of pooled POTS rate in SARS-CoV-2-infected and COVID-19-vaccinated groups from epidemiological studies, followed by subgroup analyses by characteristic. Meta-analysis of risk ratio was conducted to compare POTS rate in infected versus uninfected groups. Meta-analysis of demographics was also performed to compare cases of post-infection and post-vaccination POTS from case reports and series. RESULTS: We estimated the pooled POTS rate of 107.75 (95 % CI: 9.73 to 273.52) and 3.94 (95 % CI: 0 to 16.39) cases per 10,000 (i.e., 1.08 % and 0.039 %) in infected and vaccinated individuals based on 5 and 2 studies, respectively. Meta-regression revealed age as a significant variable influencing 86.2 % variance of the pooled POTS rate in infected population (P < 0.05). Moreover, POTS was 2.12-fold more likely to occur in infected than uninfected individuals (RR = 2.12, 95 % CI: 1.71 to 2.62, P < 0.001). Meta-analyzed demographics for cases of post-infection (n = 43) and post-vaccination (n = 17) POTS found no significant differences in several variables between groups, except that the time from exposure to symptom onset was shorter for cases of post-vaccination POTS (P < 0.05). CONCLUSION: Although evidence is limited for post-vaccination POTS, our study showed that POTS occur more frequently following SARS-CoV-2 infection than COVID-19 vaccination.

GproteinDb in 2024: new G protein-GPCR couplings, AlphaFold2-multimer models and interface interactions.

G proteins are the major signal proteins of ∼800 receptors for medicines, hormones, neurotransmitters, tastants and odorants. GproteinDb offers integrated genomic, structural, and pharmacological data and tools for analysis, visualization and experiment design. Here, we present the first major update of GproteinDb greatly expanding its coupling data and structural templates, adding AlphaFold2 structure models of GPCR-G protein complexes and advancing the interactive analysis tools for their interfaces underlying coupling selectivity. We present insights on coupling agreement across datasets and parameters, including constitutive activity, agonist-induced activity and kinetics. GproteinDb is accessible at https://gproteindb.org.

Application of coliphage as biocontrol agent in combination with gamma irradiation to eliminate multi-drug-resistant E. coli in minimally processed vegetables.

Biofilm formation is a rising concern in the food industry. Escherichia coli (E. coli) is one of the most important food-borne pathogens that can survive in food and food-related environments and eventually produce biofilms. This study suggested that both coliphages used were successful in preventing the creation of new biofilms as well as removing existing ones. Confocal laser scanning microscopy verified these findings. According to the findings, neither coliphage survived at 37 °C, but both remained stable at 4 °C and - 20 °C for extended periods of time. The study revealed that both coliphages demonstrated a greater degree of gamma irradiation resistance when compared to E. coli. The study's results indicate that the implementation of a dual method, which incorporates gamma irradiation (1.5 kGy) and coliphage treatment, on various kinds of vegetables that were infected with E. coli, resulted in a significant reduction in bacterial count (surpassing 99.99%) following a 24-h incubation period. Combining gamma irradiation and the coliphage approach was significantly effective at lowering polysaccharide concentrations and proteins in the biofilm matrix. The results revealed that the pairing of gamma irradiation and coliphages acted in conjunction to cause disruptions in the matrix of biofilm, thereby promoting cell removal compared with either of the individual treatments. Ca+ ions strengthen the weak virion interaction with the relevant bacterial host cell receptors during the adsorption process. In conclusion, use of coliphage in combination with gamma irradiation treatment can be applied to improve fresh produce's microbial safety and enhance its storability in supermarkets.

Skin Allograft after Bone Marrow Transplantation of Patient with Recessive Dystrophic Epidermolysis Bullosa.

In this study, we present a 26-year-old woman with case presentation of recessive dystrophic epidermolysis bullosa who had developed squamous cell carcinoma. The patient underwent bone marrow transplant and skin grafting with the same bone marrow donor. After excision of squamous cell carcinoma and skin grafting, no tumor was observed; thus, chemotherapy and radiation were no longer needed.

Flexible and sewable electrode based on Ni-Co@PANI-salphen composite-coated on textiles for wearable supercapacitor.

Flexible electrodes with high deformability and energy density are critical for electronic textiles. The key factor for achieving high-performance supercapacitors with superior power and energy density is the evaluation of materials that exhibit exceptional capacitive performance. Herein, we have prepared Ni-Co nanoparticles at the surface of polyaniline-salphen (Ni-Co@PS). Then, followed by casting Ni-Co@PS on a conductive carbon cloth (CC) as a substrate through a facile in-situ polymerization strategy. The morphologies of Ni-Co@PS composite were characterized by different methods such as FE-SEM, XPS, XRD, BET, and electrochemical methods. This nanocomposite showed high tolerability and a large surface area with excellent behavior as a new nanomaterial for supercapacitor application. Thus, the optimum composite designed with a metal ratio (nickel-cobalt 3:1 w/w) satisfactorily possesses a specific capacitance of up to 549.994 C g-1 (1447.2 F g-1) under 0.5 A g-1 and long-term cyclic stability featuring capacity retention of 95.9% after 5000 cycles at a current density of 9.0 A g-1. The Ni-Co@PS-CC, is a material with great potential as an electrode in asymmetric wearable supercapacitor (AWSC) apparatus, demonstrating a remarkable specific capacity of 70.01, and accompanied by an energy density of 23.46 Wh k g-1 at a power density of 800 W k g-1.

Medical Admission Prediction Score (MAPS); a simple tool to predict medical admissions in the emergency department.

INTRODUCTION: Overcrowding in the emergency departments (ED) is linked to adverse clinical outcomes, a negative impact on patient safety, patient satisfaction, and physician efficiency. We aimed to design a medical admission prediction scoring system based on readily available clinical data during ED presentation. METHODS: In this retrospective cross-sectional study, data on ED presentations and medical admissions were extracted from the Emergency and Internal Medicine departments of a tertiary care facility in Qatar. Primary outcome was medical admission. RESULTS: Of 320299 ED presentations, 218772 were males (68.3%). A total of 11847 (3.7%) medical admissions occurred. Most patients were Asians (53.7%), followed by Arabs (38.7%). Patients who got admitted were older than those who did not (p <0.001). Admitted patients were predominantly males (56.8%), had a higher number of comorbid conditions and a higher frequency of recent discharge (within the last 30 days) (p <0.001). Age > 60 years, female gender, discharge within the last 30 days, and worse vital signs at presentations were independently associated with higher odds of admission (p<0.001). These factors generated the scoring system with a cut-off of >17, area under the curve (AUC) 0.831 (95% CI 0.827-0.836), and a predictive accuracy of 83.3% (95% CI 83.2-83.4). The model had a sensitivity of 69.1% (95% CI 68.2-69.9), specificity was 83.9% (95% CI 83.7-84.0), positive predictive value (PPV) 14.2% (95% CI 13.8-14.4), negative predictive value (NPV) 98.6% (95% CI 98.5-98.7) and positive likelihood ratio (LR+) 4.28% (95% CI 4.27-4.28). CONCLUSION: Medical admission prediction scoring system can be reliably applied to the regional population to predict medical admissions and may have better generalizability to other parts of the world owing to the diverse patient population in Qatar.