Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
Rev Sci Instrum ; 93(5): 053703, 2022 May 01.
Artigo em Inglês | MEDLINE | ID: mdl-35649805

RESUMO

Cleaving single crystals in situ under ultra-high vacuum conditions provides a reliable and straightforward approach to prepare clean and atomically well-defined surfaces. Here, we present a versatile sample cleaver to efficiently prepare ionic crystal surfaces under ultra-high vacuum conditions, which is suitable for preparation of softer materials, such as alkali halides, and harder materials, such as metal oxides. One of the advantages of the presented cleaver design is that the cleaving blade and anvil to support the crystal are incorporated into the device. Therefore, no particularly strong mechanical manipulator is needed, and it is compatible with existing vacuum chambers equipped with an xyz-manipulator. We demonstrate atomically flat terraces and the atomic structure of NaCl(001), KBr(001), NiO(001), and MgO(001) cleavage planes prepared in situ under ultra-high vacuum conditions and imaged by low-temperature non-contact atomic force microscopy.

2.
Chemphyschem ; 20(18): 2333-2339, 2019 09 17.
Artigo em Inglês | MEDLINE | ID: mdl-31400291

RESUMO

We report on the influence of the surface structure and the reaction kinetics in the bottom-up fabrication of porous nanoribbons on silver surfaces using low-temperature scanning tunneling microscopy. The porous carbon nanoribbons are fabricated by the polymerization of 1,3,5-tris(3-bromophenyl)benzene directly on the Ag surface using an Ullmann-type reaction in combination with dehydrogenative coupling reactions. We demonstrate the successful on-surface synthesis of porous nanoribbons on Ag(111) and Ag(100) even though the self-assemblies of the intermediate organometallic structures and covalently-linked polymer chains are different on both surfaces. Furthermore, we present the formation of isolated porous nanoribbons by kinetic control. Our results give valuable insights into the role of substrate-induced templating effects and the reaction kinetics in the on-surface synthesis of conformationally flexible molecules.

3.
Chem Commun (Camb) ; 54(82): 11554-11557, 2018 Oct 11.
Artigo em Inglês | MEDLINE | ID: mdl-30272078

RESUMO

Based on scanning tunneling microscopy experiments combined with density functional theory, we report the formation and the electronic structure of porous binary supramolecular networks on Au(111). The two triphenylamine derivatives with identical scaffolds intermix due to a maximization of the overall number of H-bonds instead of an optimization of the H-bond strength in the bonding motif. The HOMO-LUMO gap is defined by both molecules, which is typical for electron donor-acceptor networks.

4.
Nat Mater ; 17(7): 592-598, 2018 07.
Artigo em Inglês | MEDLINE | ID: mdl-29867166

RESUMO

Electrocatalysis is at the heart of our future transition to a renewable energy system. Most energy storage and conversion technologies for renewables rely on electrocatalytic processes and, with increasing availability of cheap electrical energy from renewables, chemical production will witness electrification in the near future1-3. However, our fundamental understanding of electrocatalysis lags behind the field of classical heterogeneous catalysis that has been the dominating chemical technology for a long time. Here, we describe a new strategy to advance fundamental studies on electrocatalytic materials. We propose to 'electrify' complex oxide-based model catalysts made by surface science methods to explore electrocatalytic reactions in liquid electrolytes. We demonstrate the feasibility of this concept by transferring an atomically defined platinum/cobalt oxide model catalyst into the electrochemical environment while preserving its atomic surface structure. Using this approach, we explore particle size effects and identify hitherto unknown metal-support interactions that stabilize oxidized platinum at the nanoparticle interface. The metal-support interactions open a new synergistic reaction pathway that involves both metallic and oxidized platinum. Our results illustrate the potential of the concept, which makes available a systematic approach to build atomically defined model electrodes for fundamental electrocatalytic studies.

5.
J Am Chem Soc ; 139(37): 12976-12984, 2017 09 20.
Artigo em Inglês | MEDLINE | ID: mdl-28820266

RESUMO

We demonstrate the on-surface synthesis of porous carbon nanoribbons on Ag(111) via a preprogrammed isomerization of conformationally flexible polymer chains followed by dehydrogenation reactions using thermal annealing. The carbon chains are fabricated by polymerization of prochiral 1,3,5-tris(3-bromophenyl)benzene (mTBPB) directly on the surface using an Ullmann-type reaction. At room temperature, mTBPB partially self-assembles in halogen-bonded 2D networks, which transform into organometallic chains and rings after debromination. The chain and ring formation is facilitated by conformational switching from a C3h to Cs symmetry of mTBPB via rotation of m-phenylene units. The high conformational selectivity toward Cs-conformers is templated by the twofold coordination to Ag adatoms. After thermally induced covalent-linking through aryl-aryl coupling, well-ordered nanoporous chains are created. Finally, the rotation of single phenylene units in combination with dehydrogenation cross-linking reactions within the polymer chains leads to the unexpected formation of porous carbon nanoribbons. We unveil the reaction mechanism in a low-temperature scanning tunneling microscopy study and demonstrate that the rotation of m-phenylene units is a powerful design tool to promote structural control in the synthesis of cyclic covalent organic nanostructures on metal surfaces.

6.
Nat Commun ; 8: 14765, 2017 03 21.
Artigo em Inglês | MEDLINE | ID: mdl-28322232

RESUMO

The fabrication of nanostructures in a bottom-up approach from specific molecular precursors offers the opportunity to create tailored materials for applications in nanoelectronics. However, the formation of defect-free two-dimensional (2D) covalent networks remains a challenge, which makes it difficult to unveil their electronic structure. Here we report on the hierarchical on-surface synthesis of nearly defect-free 2D covalent architectures with carbonyl-functionalized pores on Au(111), which is investigated by low-temperature scanning tunnelling microscopy in combination with density functional theory calculations. The carbonyl-bridged triphenylamine precursors form six-membered macrocycles and one-dimensional (1D) chains as intermediates in an Ullmann-type coupling reaction that are subsequently interlinked to 2D networks. The electronic band gap is narrowed when going from the monomer to 1D and 2D surface-confined π-conjugated organic polymers comprising the same building block. The significant drop of the electronic gap from the monomer to the polymer confirms an efficient conjugation along the triphenylamine units within the nanostructures.

7.
Angew Chem Int Ed Engl ; 53(1): 310-4, 2014 Jan 03.
Artigo em Inglês | MEDLINE | ID: mdl-24288289

RESUMO

Conformational changes in the conjugated backbone of poly- and oligodiacetylenes (PDAs and ODAs) play an important role in determining the electronic properties of these compounds. At the same time, conformational changes can also result in a folded structure that shows helical chirality. Using d-camphor as a chiral building block, we have designed a high-yielding, iterative synthesis of monodisperse, optically pure cis-oligodiacetylenes (ODAs). cis-ODAs up to the tridecamer have been formed, which is the longest monodisperse cis-ODA reported to date. UV/Vis spectroscopy suggests a large effective conjugation length in THF, likely the result of a linear, planar conformation in this solvent. High-resolution STM/AFM measurements of the nonamer cast from THF onto HOPG show a linear structure. In iPrOH, circular dichroism (CD) spectra suggest the formation of chiral aggregates for ODAs with at least nine d-camphor units, based on a strong CD response.

8.
ACS Nano ; 7(5): 4441-8, 2013 May 28.
Artigo em Inglês | MEDLINE | ID: mdl-23586703

RESUMO

We present a fabrication process for freely suspended membranes consisting of bi- and trilayer graphene grown on silicon carbide. The procedure, involving photoelectrochemical etching, enables the simultaneous fabrication of hundreds of arbitrarily shaped membranes with an area up to 500 µm(2) and a yield of around 90%. Micro-Raman and atomic force microscopy measurements confirm that the graphene layer withstands the electrochemical etching and show that the membranes are virtually unstrained. The process delivers membranes with a cleanliness suited for high-resolution transmission electron microscopy (HRTEM) at atomic scale. The membrane, and its frame, is very robust with respect to thermal cycling above 1000 °C as well as harsh acidic or alkaline treatment.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA