Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 16 de 16
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
Nat Rev Chem ; 8(3): 159-178, 2024 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-38388837

RESUMO

The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales - including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory.

2.
ACS Catal ; 13(15): 10457-10467, 2023 Aug 04.
Artigo em Inglês | MEDLINE | ID: mdl-37564127

RESUMO

Copper-based hydrogen evolution electrocatalysts are promising materials to scale-up hydrogen production due to their reported high current densities; however, electrode durability remains a challenge. Here, we report a facile, cost-effective, and scalable synthetic route to produce Cu2-xS electrocatalysts, exhibiting hydrogen evolution rates that increase for ∼1 month of operation. Our Cu2-xS electrodes reach a state-of-the-art performance of ∼400 mA cm-2 at -1 V vs RHE under mild conditions (pH 8.6), with almost 100% Faradaic efficiency for hydrogen evolution. The rise in current density was found to scale with the electrode electrochemically active surface area. The increased performance of our Cu2-xS electrodes correlates with a decrease in the Tafel slope, while analyses by X-ray photoemission spectroscopy, operando X-ray diffraction, and in situ spectroelectrochemistry cooperatively revealed the Cu-centered nature of the catalytically active species. These results allowed us to increase fundamental understanding of heterogeneous electrocatalyst transformation and consequent structure-activity relationship. This facile synthesis of highly durable and efficient Cu2-xS electrocatalysts enables the development of competitive electrodes for hydrogen evolution under mild pH conditions.

4.
Nat Commun ; 13(1): 4341, 2022 Jul 27.
Artigo em Inglês | MEDLINE | ID: mdl-35896541

RESUMO

Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) able to work in acidic working conditions are elusive. While many first-row transition metal oxides are competitive in alkaline media, most of them just dissolve or become inactive at high proton concentrations where hydrogen evolution is preferred. Only noble-metal catalysts, such as IrO2, are fast and stable enough in acidic media. Herein, we report the excellent activity and long-term stability of Co3O4-based anodes in 1 M H2SO4 (pH 0.1) when processed in a partially hydrophobic carbon-based protecting matrix. These Co3O4@C composites reliably drive O2 evolution a 10 mA cm-2 current density for >40 h without appearance of performance fatigue, successfully passing benchmarking protocols without incorporating noble metals. Our strategy opens an alternative venue towards fast, energy efficient acid-media water oxidation electrodes.

5.
Angew Chem Int Ed Engl ; 59(49): 21904-21908, 2020 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-32729209

RESUMO

Establishing the atomic-scale structure of metal-oxide surfaces during electrochemical reactions is a key step to modeling this important class of electrocatalysts. Here, we demonstrate that the characteristic (√2×√2)R45° surface reconstruction formed on (001)-oriented magnetite single crystals is maintained after immersion in 0.1 M NaOH at 0.20 V vs. Ag/AgCl and we investigate its dependence on the electrode potential. We follow the evolution of the surface using in situ and operando surface X-ray diffraction from the onset of hydrogen evolution, to potentials deep in the oxygen evolution reaction (OER) regime. The reconstruction remains stable for hours between -0.20 and 0.60 V and, surprisingly, is still present at anodic current densities of up to 10 mA cm-2 and strongly affects the OER kinetics. We attribute this to a stabilization of the Fe3 O4 bulk by the reconstructed surface. At more negative potentials, a gradual and largely irreversible lifting of the reconstruction is observed due to the onset of oxide reduction.

6.
Phys Rev Lett ; 123(7): 076801, 2019 Aug 16.
Artigo em Inglês | MEDLINE | ID: mdl-31491121

RESUMO

Structural defects in 2D materials offer an effective way to engineer new material functionalities beyond conventional doping. We report on the direct experimental correlation of the atomic and electronic structure of a sulfur vacancy in monolayer WS_{2} by a combination of CO-tip noncontact atomic force microscopy and scanning tunneling microscopy. Sulfur vacancies, which are absent in as-grown samples, were deliberately created by annealing in vacuum. Two energetically narrow unoccupied defect states followed by vibronic sidebands provide a unique fingerprint of this defect. Direct imaging of the defect orbitals, together with ab initio GW calculations, reveal that the large splitting of 252±4 meV between these defect states is induced by spin-orbit coupling.

7.
Nat Commun ; 10(1): 3382, 2019 Jul 29.
Artigo em Inglês | MEDLINE | ID: mdl-31358753

RESUMO

Chalcogen vacancies are generally considered to be the most common point defects in transition metal dichalcogenide (TMD) semiconductors because of their low formation energy in vacuum and their frequent observation in transmission electron microscopy studies. Consequently, unexpected optical, transport, and catalytic properties in 2D-TMDs have been attributed to in-gap states associated with chalcogen vacancies, even in the absence of direct experimental evidence. Here, we combine low-temperature non-contact atomic force microscopy, scanning tunneling microscopy and spectroscopy, and state-of-the-art ab initio density functional theory and GW calculations to determine both the atomic structure and electronic properties of an abundant chalcogen-site point defect common to MoSe2 and WS2 monolayers grown by molecular beam epitaxy and chemical vapor deposition, respectively. Surprisingly, we observe no in-gap states. Our results strongly suggest that the common chalcogen defects in the described 2D-TMD semiconductors, measured in vacuum environment after gentle annealing, are oxygen substitutional defects, rather than vacancies.

8.
Adv Mater ; 27(38): 5693-719, 2015 Oct 14.
Artigo em Inglês | MEDLINE | ID: mdl-26332202

RESUMO

Reduced-dimensionality materials for photonic and optoelectronic applications including energy conversion, solid-state lighting, sensing, and information technology are undergoing rapid development. The search for novel materials based on reduced-dimensionality is driven by new physics. Understanding and optimizing material properties requires characterization at the relevant length scale, which is often below the diffraction limit. Three important material systems are chosen for review here, all of which are under investigation at the Molecular Foundry, to illustrate the current state of the art in nanoscale optical characterization: 2D semiconducting transition metal dichalcogenides; 1D semiconducting nanowires; and energy-transfer in assemblies of 0D semiconducting nanocrystals. For each system, the key optical properties, the principal experimental techniques, and important recent results are discussed. Applications and new developments in near-field optical microscopy and spectroscopy, scanning probe microscopy, and cathodoluminescence in the electron microscope are given detailed attention. Work done at the Molecular Foundry is placed in context within the fields under review. A discussion of emerging opportunities and directions for the future closes the review.

9.
ACS Nano ; 9(10): 10445-52, 2015 Oct 27.
Artigo em Inglês | MEDLINE | ID: mdl-26402255

RESUMO

Artificial solids composed of semiconductor quantum dots (QDs) are being developed for large-area electronic and optoelectronic applications, but these materials often have defect-induced in-gap states (IGS) of unknown chemical origin. Here we performed scanning probe based spectroscopic analysis and density functional theory calculations to determine the nature of such states and their electronic structure. We found that IGS near the valence band occur frequently in the QDs except when treated with reducing agents. Calculations on various possible defects and chemical spectroscopy revealed that molecular oxygen is most likely at the origin of these IGS. We expect this impurity-induced deep IGS to be a common occurrence in ionic semiconductors, where the intrinsic vacancy defects either do not produce IGS or produce shallow states near band edges. Ionic QDs with surface passivation to block impurity adsorption are thus ideal for high-efficiency optoelectronic device applications.

10.
Nano Lett ; 15(5): 3249-53, 2015 May 13.
Artigo em Inglês | MEDLINE | ID: mdl-25844919

RESUMO

Charge hopping and percolation in quantum dot (QD) solids has been widely studied, but the microscopic nature of the percolation process is not understood or determined. Here we present the first imaging of the charge percolation pathways in two-dimensional PbS QD arrays using Kelvin probe force microscopy (KPFM). We show that under dark conditions electrons percolate via in-gap states (IGS) instead of the conduction band, while holes percolate via valence band states. This novel transport behavior is explained by the electronic structure and energy level alignment of the individual QDs, which was measured by scanning tunneling spectroscopy (STS). Chemical treatments with hydrazine can remove the IGS, resulting in an intrinsic defect-free semiconductor, as revealed by STS and surface potential spectroscopy. The control over IGS can guide the design of novel electronic devices with impurity conduction, and photodiodes with controlled doping.

11.
Nanoscale ; 6(24): 15271-9, 2014 Dec 21.
Artigo em Inglês | MEDLINE | ID: mdl-25382549

RESUMO

Achieving control over the self-organization of functional molecules on graphene is critical for the development of graphene technology in organic electronic and spintronic. Here, by using a scanning tunneling microscope (STM), we show that the electron acceptor molecule 7,7',8,8'-tetracyano-p-quinodimethane (TCNQ) and its fluorinated derivative 2,3,5,6-tetrafluoro-7,7',8,8'-tetracyano-p-quinodimethane (F4-TCNQ), co-deposited on the surface of epitaxial graphene on Ru(0001), transform spontaneously into their corresponding magnetic anions and self-organize in two remarkably different structures. TCNQ forms densely packed linear magnetic arrays, while F4-TCNQ molecules remain as isolated non interacting magnets. With the help of density functional theory (DFT) calculations, we trace back the origin of this behavior in the competition between the intermolecular repulsion experienced by the individual charged anions, which tends to separate the molecules, and the delocalization of the electrons transferred from the surface to the molecules, which promotes the formation of molecular oligomers. Our results demonstrate that it is possible to control the spatial arrangement of organic magnetic anions co-adsorbed on a surface by means of chemical substitution, paving the way for the design of two-dimensional fully organic magnetic structures on graphene and on other surfaces.

12.
Nano Lett ; 14(8): 4560-7, 2014 Aug 13.
Artigo em Inglês | MEDLINE | ID: mdl-25054236

RESUMO

TCNQ molecules are used as a sensitive probe for the Kondo response of the electron gas of a nanostructured graphene grown on Ru(0001) presenting a moiré pattern. All adsorbed molecules acquired an extra electron by charge transfer from the substrate, but only those adsorbed in the FCC-Top areas of the moiré show magnetic moment and Kondo resonance in the STS spectra. DFT calculations trace back this behavior to the existence of a surface resonance in the low areas of the graphene moiré, whose density distribution strongly depends on the stacking sequence of the moiré area and effectively quenches the magnetic moment for HCP-Top sites.


Assuntos
Grafite/química , Nanoestruturas/química , Nitrilas/química
13.
J Phys Condens Matter ; 25(48): 484007, 2013 Dec 04.
Artigo em Inglês | MEDLINE | ID: mdl-24201116

RESUMO

We report here on the molecular self-assembly of 7, 7', 8, 8' tetracyanoquinodimethane (TCNQ) (schematic representation of the molecule on figure 1(b)) on a single-crystal Cu(111) surface, followed by deposition of Fe and Mn, and on the formation of an ordered metal­organic coordination network of Fe (or Mn)­TCNQ units, which contains magnetic ions separated by 0.9 nm.

14.
ACS Nano ; 7(4): 2927-34, 2013 Apr 23.
Artigo em Inglês | MEDLINE | ID: mdl-23473381

RESUMO

The mechanical behavior of a periodically buckled graphene membrane has been investigated by noncontact atomic force microscopy in ultrahigh vacuum. When a graphene monolayer is grown on Ru(0001), a regular arrangement of 0.075 nm high nanodomes forming a honeycomb lattice with 3 nm periodicity forms spontaneously. This structure responds in a perfectly reversible way to relative normal displacements up to 0.12 nm. Indeed, the elasticity of the nanodomes is proven by realistic DFT calculations, with an estimated normal stiffness k∼40 N/m. Our observations extend previous results on macroscopic graphene samples and confirm that the elastic behavior of this material is maintained down to nanometer length scales, which is important for the development of new high-frequency (terahertz) electromechanical devices.


Assuntos
Grafite/química , Microscopia de Força Atômica/métodos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Módulo de Elasticidade , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Estresse Mecânico , Propriedades de Superfície
15.
Ultramicroscopy ; 122: 1-5, 2012 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-22955323

RESUMO

An in situ tip preparation procedure compatible with ultra-low temperature and high magnetic field scanning tunneling microscopes is presented. This procedure does not require additional preparation techniques such as thermal annealing or ion milling. It relies on the local electric-field-induced deposition of material from the tip onto the studied surface. Subsequently, repeated indentations are performed onto the sputtered cluster to mechanically anneal the tip apex and thus to ensure the stability of the tip. The efficiency of this method is confirmed by comparing the topography and spectroscopy data acquired with either unprepared or in situ prepared tips on epitaxial graphene grown on Ru (0001). We demonstrate that the use of in situ prepared tips increases the stability of the scanning tunneling images and the reproducibility of the spectroscopic measurements.

16.
Chem Commun (Camb) ; 46(43): 8198-200, 2010 Nov 21.
Artigo em Inglês | MEDLINE | ID: mdl-20927433

RESUMO

Graphene grown on Ir(111) electronically decouples adsorbed molecules from the metallic substrate and allows the study of their self-organization on surfaces. We study two electron acceptor molecules from the same family. The intermolecular interaction, attractive for TCNQ and repulsive for F(4)-TCNQ, dictates the molecular ordering.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA