Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 202
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
ACS Org Inorg Au ; 4(5): 545-556, 2024 Oct 02.
Artigo em Inglês | MEDLINE | ID: mdl-39371325

RESUMO

From a fundamental perspective, studies of novel mixed-valent complexes containing ferrocenyl units are motivated by the prospect of improving and extending electron transfer models and theories. Here, the series of triferrocenylpnictogens Fc3E was extended to the heavier analogues (E = As, Sb, and Bi), and the influence of the bridging atom was investigated with Fc3P as a reference. Electrochemical studies elucidate the effect of electrostatic contribution on the large redox splitting (ΔE 1) exhibited by the compounds and solvent stabilization in the case of Fc3As. Structural characterization of the triferrocenylpnictogens combined with spectroelectrochemical studies indicates weak electronic couplings in the related cations [Fc3E]+, suggesting a through-space mechanism.

2.
J Inorg Biochem ; 260: 112698, 2024 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-39178736

RESUMO

Redox non-innocent ligands hold the potential to expand the redox chemistry and activity of transition metal catalysts. The impact of the additional redox chemistry of phenol ligands in oxidation catalysis is explored here in the complex µ-oxido-diiron(III) polypyridyl (1) [(L)Fe(III)(µ-O)Fe(III)(L)](ClO4)2 (where HL is 2-(((di(pyridin-2-yl)methyl) (pyridin-2-ylmethyl) amino)methyl)phenol) and its tert-butyl substituted analog 2, in which each of the Fe(III) centers is coordinated to a phenolato moiety of the ligand. Complex 1 was shown earlier to catalyse the oxidation of benzyl alcohols to aldehydes with H2O2. In particular acid was found to accelerate the reactions by removal of a lag period before catalysis initiated. Here, we use reaction monitoring with resonance Raman, UV/vis absorption and EPR spectroscopy to show that under catalytic conditions, i.e. with excess H2O2, rapid (< 5 s) loss of the phenolato moiety occurs, resulting in the formation of an N4 ligated Fe(III) complex. This N4 coordinated complex forms a Fe(III)-OOH species, which is responsible for alcohol oxidation and over time a relatively stable oxido-bridged dinuclear Fe(III) complex forms as a resting state in the catalytic system. The main role of acid in the catalysis is shown to be to facilitate the initial coordination of H2O2 by driving the formation of mononuclear complexes from 1 and 2. The data show that although the phenolato moiety imparts interesting redox properties on complex 1, it does not contribute directly to the oxidation catalysis observed with H2O2.


Assuntos
Álcoois , Complexos de Coordenação , Peróxido de Hidrogênio , Oxirredução , Peróxido de Hidrogênio/química , Catálise , Complexos de Coordenação/química , Álcoois/química , Ligantes , Compostos Férricos/química
3.
J Chem Phys ; 161(7)2024 Aug 21.
Artigo em Inglês | MEDLINE | ID: mdl-39149991

RESUMO

Unidirectional photochemical molecular motors can act as a power source for molecular machines. The motors operate by successive excited state isomerization and ground state helix inversion reactions, attaining unidirectionality from an interplay of steric strain and stereochemistry. Optimizing the yield of the excited state isomerization reaction is an important goal that requires detailed knowledge of excited state dynamics. Here, we investigate the effect of electron withdrawing and donating substituents on excited state structure and ultrafast dynamics in a series of newly synthesized first generation photochemical molecular motors. All substituents red-shift the absorption spectra, while some modify the Stokes shift and render the fluorescence quantum yield solvent polarity dependent. Raman spectra and density functional theory calculations reveal that the stretching mode of the C=C "axle" in the electronic ground state shows a small red-shift when conjugated with electron withdrawing substituents. Ultrafast fluorescence measurements reveal substituent and solvent polarity effects, with the excited state decay being accelerated by both polar solvent environment and electron withdrawing substituents. Excited state structural dynamics are investigated by fluorescence coherence spectroscopy and femtosecond stimulated Raman spectroscopy. The time resolved Raman measurements are shown to provide structural data specifically on the Franck-Condon excited state. The C=C localized modes have a different substituent dependence compared to the ground state, with the unsubstituted motor having the most red-shifted mode. Such measurements provide valuable new insights into pathways to optimize photochemical molecular motor performance, especially if they can be coupled with high-quality quantum molecular dynamics calculations.

4.
J Inorg Biochem ; 258: 112620, 2024 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-38824901

RESUMO

Peroxo-diiron(III) species are present in the active sites of many metalloenzymes that carry out challenging organic transformations. The reactivity of these species is influenced by various factors, such as the structure and topology of the supporting ligands, the identity of the axial and equatorial co-ligands, and the oxidation states of the metal ion(s). In this study, we aim to diversify the importance of equatorial ligands in controlling the reactivity of peroxo-diiron(III) species. As a model compound, we chose the previously published and fully characterized [(PBI)2(CH3CN)FeIII(µ-O2)FeIII(CH3CN)(PBI)2]4+ complex, where the steric effect of the four PBI ligands is minimal, so the labile CH3CN molecules easily can be replaced by different monodentate co-ligands (substituted pyridines and N-donor heterocyclic compounds). Thus, their effect on the electronic and spectral properties of peroxo-divas(III) intermediates could be easily investigated. The relationship between structure and reactivity was also investigated in the stoichiometric deformylation of PPA mediated by peroxo-diiron(III) complexes. It was found that the deformylation rates are influenced by the Lewis acidity and redox properties of the metal centers, and showed a linear correlation with the FeIII/FeII redox potentials (in the range of 197 to 415 mV).


Assuntos
Aldeídos , Complexos de Coordenação , Ligantes , Aldeídos/química , Complexos de Coordenação/química , Oxirredução , Compostos Férricos/química , Compostos Heterocíclicos/química
5.
Lab Chip ; 24(14): 3498-3507, 2024 Jul 10.
Artigo em Inglês | MEDLINE | ID: mdl-38920114

RESUMO

The control over fluid flow achievable in microfluidic devices creates opportunities for applications in many fields. In simple microchannels, flow is purely laminar when one solvent is used, and hence, achieving reliable mixing is an important design consideration. Integration of structures, such as grooves, into the channels to act as static mixers is a commonly used approach. The mixing induced by these structures can be validated by determining concentration profiles in microfluidic channels following convergence of solvent streams from separate inlets. Spatially resolved characterisation is therefore necessary and requires in-line analysis methods. Here we report a line-focused illumination approach to provide operando, spatially resolved Raman spectra across the width of channels in the analysis of single- and multi-phase liquid systems and chemical reactions. A scientific complementary metal oxide semiconductor (sCMOS) sensor is used to overcome smearing encountered during spectral readout of images with CCD sensors. Isotopically labelled probes, in otherwise identical flow streams, show that z-confocality limits the spatial resolution and certainty as to the extent of mixing that can be achieved. These limitations are overcome using fast chemical reactions between reagents entering a microchannel in separate solvent streams. We show here that the progression of a chemical reaction, for which only the product is observable, is a powerful approach to determine the extent of mixing in a microchannel. Specifically resonance enhancement of Raman scattering from a product formed allows for determination of the true efficiency of mixing over the length and width of microchannels. Raman spectral images obtained by line-focused illumination show onset of mixing by observing the product of reagents entering from the separate inlets. Mixing is initially off-centre and immediately before the apex of the first groove of the static mixer, and then evolves along the entire width of the channel after a full cycle of grooves.

6.
Catal Sci Technol ; 14(9): 2423-2433, 2024 May 07.
Artigo em Inglês | MEDLINE | ID: mdl-38721396

RESUMO

The activation of alkyl hydroperoxides to generate radicals is a key step in the initiation of radical polymerisations in many industrial applications, not least protective coatings. Cobalt soaps (Co(ii) alkyl carboxylates) are highly effective catalysts under ambient conditions but viable alternatives based on less scarce catalysts are desirable, with especially iron and manganese catalysts showing potential. Manganese complexes of the ligand N,N',N″-trimethyl-1,4,7-triazacyclononane (tmtacn) are long established as catalysts for organic oxidations with H2O2, however their reactivity with alkyl hydroperoxides is less studied especially in apolar solvents. Here we show that this family of complexes can be employed as catalysts for the decomposition of alkyl hydroperoxides in apolar solvents such as styrene/methyl methacrylate mixtures and resins based on styrene/bisphenol-A based diglycidyl ether bismethacrylate (BADGE-MA). The progress of alkene polymerisation in crosslinking resins is followed by Raman spectroscopy to establish its dependence on the oxidation state of the manganese catalyst used, as gelation time and onset of autoacceleration are of particular interest for many applications. We show, through reaction progress monitoring with UV/vis absorption and Raman spectroscopy, that the stability of the manganese complexes in the resin mixtures has a substantial effect on curing progress and that the oxidation state of the resting state of the catalyst is most likely Mn(ii), in contrast to reactions with H2O2 as oxidant in which the oxidation state of the resting state of catalyst is Mn(iii). Manganese complexes of tmtacn are shown to be capable initiators of alkene radical polymerisations, and their rich coordination and redox chemistry means that resin curing kinetics can potentially be tuned more readily than with cobalt alkyl carboxylates.

7.
J Am Chem Soc ; 146(18): 12255-12270, 2024 May 08.
Artigo em Inglês | MEDLINE | ID: mdl-38656968

RESUMO

Unidirectional photochemically driven molecular motors (PMMs) convert the energy of absorbed light into continuous rotational motion. As such they are key components in the design of molecular machines. The prototypical and most widely employed class of PMMs is the overcrowded alkenes, where rotational motion is driven by successive photoisomerization and thermal helix inversion steps. The efficiency of such PMMs depends upon the speed of rotation, determined by the rate of ground state thermal helix inversion, and the quantum yield of photoisomerization, which is dependent on the excited state energy landscape. The former has been optimized by synthetic modification across three generations of overcrowded alkene PMMs. These improvements have often been at the expense of photoisomerization yield, where there remains room for improvement. In this perspective we review the application of ultrafast spectroscopy to characterize the excited state dynamics in PMMs. These measurements lead to a general mechanism for all generations of PMMs, involving subpicosecond decay of a Franck-Condon excited state to populate a dark excited state which decays within picoseconds via conical intersections with the electronic ground state. The model is discussed in the context of excited state dynamics calculations. Studies of PMM photochemical dynamics as a function of solvent suggest exploitation of intramolecular charge transfer and solvent polarity as a route to controlling photoisomerization yield. A test of these ideas for a first generation motor reveals a high degree of solvent control over isomerization yield. These results suggest a pathway to fine control over the performance of future PMMs.

8.
Nat Chem ; 16(8): 1330-1338, 2024 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-38671301

RESUMO

Artificial molecular motors and machines constitute a critical element in the transition from individual molecular motion to the creation of collective dynamic molecular systems and responsive materials. The design of artificial light-driven molecular motors operating with high efficiency and selectivity constitutes an ongoing fundamental challenge. Here we present a highly versatile synthetic approach based on Rieche formylation that boosts the quantum yield of the forward photoisomerization reaction while reaching near-perfect selectivity in the steps involved in the unidirectional rotary cycle and drastically reducing competing photoreactions. This motor is readily accessible in its enantiopure form and operates with nearly quantitative photoconversions. It can easily be functionalized further and outperforms its direct predecessor as a reconfigurable chiral dopant in cholesteric liquid crystal materials.

9.
J Am Chem Soc ; 145(36): 19849-19855, 2023 Sep 13.
Artigo em Inglês | MEDLINE | ID: mdl-37646616

RESUMO

Molecular motors based on the overcrowded alkene motif convert light energy into unidirectional mechanical motion through an excited state isomerization reaction. The realization of experimental control over conversion efficiency in these molecular motors is an important goal. Here, we combine the synthesis of a novel "push-pull" overcrowded alkene motor with photophysical characterization by steady state and ultrafast time-resolved electronic spectroscopy. We show that tuning of the charge transfer character in the excited state has a dramatic effect on the photoisomerization yield, enhancing it to near unity in nonpolar solvents while largely suppressing it in polar solvents. This behavior is explained through reference to solvent- and substituent-dependent potential energy surfaces and their effect on conical intersections to the ground state. These observations offer new routes to the fine control of motor efficiency and introduce additional degrees of freedom in the synthesis and exploitation of light-driven molecular motors.

10.
Langmuir ; 39(30): 10383-10394, 2023 Aug 01.
Artigo em Inglês | MEDLINE | ID: mdl-37477006

RESUMO

Electrochemistry and electrochemical reactions are increasingly important in the transition to a sustainable chemical industry. The electron transfer that drives such reactions takes place within nanometers of the electrode surface, and follow-up chemical reactions take place within the diffusion layer. Hence, understanding electrochemical reactions requires time-, potential-, and spatially resolved analysis. The confocal nature of Raman spectroscopy provides high spatial resolution, in addition to detailed information on molecular structure. The intrinsic weakness of nonresonant Raman scattering, however, is not sensitive enough for relatively minor changes to the solution resulting from reactions at the electrode interface. Indeed, the limit of detection is typically well above the concentrations used in electrochemical studies. Here, we show that surface-enhanced Raman scattering (SERS) and resonance Raman (rR) spectroscopy allow for spatially and time-resolved analysis of solution composition at (<1-2 nm) and near (within 5 µm) the electrode surface, respectively, in a selective manner for species present at low (<1 mM) concentrations. We show changes in concentration of species at the electrode surface, without the need for labels, specific adsorption, or resonance enhancement, using a SERS-active gold electrode prepared readily by electrochemical surface roughening. A combination of smooth and roughened gold electrodes is used to distinguish between surface and resonance enhancement using the well-known redox couples ferrocene and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). We discuss the impact of specific adsorption on the spectral analysis with the ruthenium(II) polypyridyl complex, [Ru(bpy)3]2+. The dual function of the electrode (surface enhancement and electron transfer) in the analysis of solution processes is demonstrated with the reversible oxidation of TMA (4,N,N-trimethylaniline), where transient soluble species are identified in real time, with rapid spectral acquisition, making use of localized enhancement. We anticipate that this approach will find use in elucidating electro(catalytic) reactions at electrode interfaces.

11.
Green Chem ; 25(10): 4058-4066, 2023 May 22.
Artigo em Inglês | MEDLINE | ID: mdl-37223211

RESUMO

Renewable polysaccharide feedstocks are of interest in bio-based food packaging, coatings and hydrogels. Their physical properties often need to be tuned by chemical modification, e.g. by oxidation using periodate, to introduce carboxylic acid, ketone or aldehyde functional groups. The reproducibility required for application on an industrial scale, however, is challenged by uncertainty about the composition of product mixtures obtained and of the precise structural changes that the reaction with periodate induces. Here, we show that despite the structural diversity of gum arabic, primarily rhamnose and arabinose subunits undergo oxidation, whereas (in-chain) galacturonic acids are unreactive towards periodate. Using model sugars, we show that periodate preferentially oxidises the anti 1,2-diols in the rhamnopyranoside monosaccharides present as terminal groups in the biopolymer. While formally oxidation of vicinal diols results in the formation of two aldehyde groups, only traces of aldehydes are observed in solution, with the main final products obtained being substituted dioxanes, both in solution and in the solid state. The substituted dioxanes form most likely by the intramolecular reaction of one aldehyde with a nearby hydroxyl group, followed by hydration of the remaining aldehyde to form a geminal diol. The absence of significant amounts of aldehyde functional groups in the modified polymer impacts crosslinking strategies currently attempted in the preparation of renewable polysaccharide-based materials.

12.
ChemCatChem ; 15(1): e202201072, 2023 Jan 09.
Artigo em Inglês | MEDLINE | ID: mdl-37082112

RESUMO

The mechanism and the reactive species involved in the oxidation of alkenes, and alcohols with H2O2, catalysed by an in situ prepared mixture of a MnII salt, pyridine-2-carboxylic acid and a ketone is elucidated using substrate competition experiments, kinetic isotope effect (KIE) measurements, and atom tracking with 18O labelling. The data indicate that a single reactive species engages in the oxidation of both alkenes and alcohols. The primary KIE in the oxidation of benzyl alcohols is ca. 3.5 and shows the reactive species to be selective despite a zero order dependence on substrate concentration, and the high turnover frequencies (up to 30 s-1) observed. Selective 18O labelling identifies the origin of the oxygen atoms transferred to the substrate during oxidation, and is consistent with a highly reactive, e. g., [MnV(O)(OH)] or [MnV(O)2], species rather than an alkylperoxy or hydroperoxy species.

13.
Nat Commun ; 14(1): 1253, 2023 Mar 06.
Artigo em Inglês | MEDLINE | ID: mdl-36878920

RESUMO

Controlling molecular translation at the nanoscale is a key objective for development of synthetic molecular machines. Recently developed third generation photochemically driven molecular motors (3GMs), comprising pairs of overcrowded alkenes capable of cooperative unidirectional rotation offer the possibility of converting light energy into translational motion. Further development of 3GMs demands detailed understanding of their excited state dynamics. Here we use time-resolved absorption and emission to track population and coherence dynamics in a 3GM. Femtosecond stimulated Raman reveals real-time structural dynamics as the excited state evolves from a Franck-Condon bright-state through weakly-emissive dark-state to the metastable product, yielding new insight into the reaction coordinate. Solvent polarity modifies the photoconversion efficiency suggesting charge transfer character in the dark-state. The enhanced quantum yield correlates with suppression of a low-frequency flapping motion in the excited state. This detailed characterization facilitates development of 3GMs, suggesting exploitation of medium and substituent effects to modulate motor efficiency.

14.
Chem Sci ; 13(28): 8253-8264, 2022 Jul 20.
Artigo em Inglês | MEDLINE | ID: mdl-35919721

RESUMO

The incorporation of molecular machines into the backbone of porous framework structures will facilitate nano actuation, enhanced molecular transport, and other out-of-equilibrium host-guest phenomena in well-defined 3D solid materials. In this work, we detail the synthesis of a diamine-based light-driven molecular motor and its incorporation into a series of imine-based polymers and covalent organic frameworks (COF). We study structural and dynamic properties of the molecular building blocks and derived self-assembled solids with a series of spectroscopic, diffraction, and theoretical methods. Using an acid-catalyzed synthesis approach, we are able to obtain the first crystalline 2D COF with stacked hexagonal layers that contains 20 mol% molecular motors. The COF features a specific pore volume and surface area of up to 0.45 cm3 g-1 and 604 m2 g-1, respectively. Given the molecular structure and bulkiness of the diamine motor, we study the supramolecular assembly of the COF layers and detail stacking disorders between adjacent layers. We finally probe the motor dynamics with in situ spectroscopic techniques revealing current limitations in the analysis of these new materials and derive important analysis and design criteria as well as synthetic access to new generations of motorized porous framework materials.

15.
J Phys Chem C Nanomater Interfaces ; 126(17): 7680-7687, 2022 May 05.
Artigo em Inglês | MEDLINE | ID: mdl-35558822

RESUMO

Thiophenol is a model compound used in the study of self-assembly of arylthiols on gold surfaces. In particular, changes in the surface-enhanced Raman scattering (SERS) spectra of these self-assembled monolayers (SAMs) with a change of conditions have been ascribed to, for example, differences in orientation with respect to the surface, protonation state, and electrode potential. Here, we show that potential-induced changes in the SERS spectra of SAMs of thiophenol on electrochemically roughened gold surfaces can be due to local pH changes at the electrode. The changes observed during the potential step and cyclic voltammetry experiments are identical to those induced by acid-base switching experiments in a protic solvent. The data indicate that the potential-dependent spectral changes, assigned earlier to changes in molecular orientation with respect to the surface, can be ascribed to changes in the pH locally at the electrode. The pH at the electrode can change as much as several pH units during electrochemical measurements that reach positive potentials where oxidation of adventitious water can occur. Furthermore, once perturbed by applying positive potentials, the pH at the electrode takes considerable time to recover to that of the bulk solution. It is noted that the changes in pH even during cyclic voltammetry in organic solvents can be equivalent to the addition of strong acids, such as CF3SO3H, and such effects should be considered in the study of the redox chemistry of pH-sensitive redox systems and potential-dependent SERS in particular.

16.
RSC Adv ; 12(5): 2537-2548, 2022 Jan 18.
Artigo em Inglês | MEDLINE | ID: mdl-35425317

RESUMO

The curing of bis-methacrylate-styrene resins initiated by the cobalt catalyzed decomposition of cumyl hydroperoxide is monitored at ambient temperatures in situ by EPR and Raman spectroscopy. EPR spectroscopy shows the appearance of organic radicals after ca. 1 h from initiation with an increase in intensity from both polystyrene and methacrylate based radical species over a further ca. 2 h period to reach a maximum spin concentration of ca. 2-3 mM. Alkene conversion to polymer was monitored by Raman spectroscopy in real time in situ with EPR spectroscopy and reveals that the appearance of the radical signals is first observed only as the conversion approaches its maximum extent (70% at room temperature), i.e., the resin reaches a glass-like state. The radicals persist for several months on standing at room temperature. Flash frozen samples (77 K) did not show EPR signals within 1 h of initiation. The nature of the radicals responsible for the EPR spectra observed were explored by DFT methods and isotope labelling experiments (D8-styrene) and correspond to radicals of both methacrylate and polystyrene. Combined temperature dependent EPR and Raman spectroscopy shows that conversion increases rapidly upon heating of a cured sample, reaching full conversion at 80 °C with initially little effect on the EPR spectrum. Over time (i.e. subsequent to reaching full conversion of alkene) there was a small but clear increase in the EPR signal due to the methacrylate based radicals and minor decrease in the signal due to the polystyrene based radicals. The appearance of the radical signals as the reaction reaches completion and their absence in samples flash frozen before polymerization has halted, indicate that the observed radicals are non-propagating. The formation of the radicals due to stress within the samples is excluded. Hence, the observed radicals are a representative of the steady state concentration of radicals present in the resin over the entire timespan of the polymerization. The data indicate that the lack of EPR signals is most likely due to experimental aspects, in particular spin saturation, rather than low steady state concentrations of propagating radicals during polymerization.

17.
Chem Sci ; 13(11): 3263-3272, 2022 Mar 16.
Artigo em Inglês | MEDLINE | ID: mdl-35414864

RESUMO

Molecular recognition-driven self-assembly employing single-stranded DNA (ssDNA) as a template is a promising approach to access complex architectures from simple building blocks. Oligonucleotide-based nanotechnology and soft-materials benefit from the high information storage density, self-correction, and memory function of DNA. Here we control these beneficial properties with light in a photoresponsive biohybrid hydrogel, adding an extra level of function to the system. An ssDNA template was combined with a complementary photo-responsive unit to reversibly switch between various functional states of the supramolecular assembly using a combination of light and heat. We studied the structural response of the hydrogel at both the microscopic and macroscopic scale using a combination of UV-vis absorption and CD spectroscopy, as well as fluorescence, transmission electron, and atomic force microscopy. The hydrogels grown from these supramolecular self-assembly systems show remarkable shape-memory properties and imprinting shape-behavior while the macroscopic shape of the materials obtained can be further manipulated by irradiation.

18.
Nat Commun ; 13(1): 1951, 2022 Apr 12.
Artigo em Inglês | MEDLINE | ID: mdl-35414051

RESUMO

Although light is a prominent stimulus for smart materials, the application of photoswitches as light-responsive triggers for phase transitions of porous materials remains poorly explored. Here we incorporate an azobenzene photoswitch in the backbone of a metal-organic framework producing light-induced structural contraction of the porous network in parallel to gas adsorption. Light-stimulation enables non-invasive spatiotemporal control over the mechanical properties of the framework, which ultimately leads to pore contraction and subsequent guest release via negative gas adsorption. The complex mechanism of light-gated breathing is established by a series of in situ diffraction and spectroscopic experiments, supported by quantum mechanical and molecular dynamic simulations. Unexpectedly, this study identifies a novel light-induced deformation mechanism of constrained azobenzene photoswitches relevant to the future design of light-responsive materials.

19.
J Am Chem Soc ; 144(11): 4977-4988, 2022 03 23.
Artigo em Inglês | MEDLINE | ID: mdl-35274938

RESUMO

Electron/proton transfers in water proceeding from ground/excited states are the elementary reactions of chemistry. These reactions of an iconic class of molecules─polypyridineRu(II)─are now controlled by capturing or releasing three of them with hosts that are shape-switchable. Reversible erection or collapse of the host walls allows such switchability. Some reaction rates are suppressed by factors of up to 120 by inclusive binding of the metal complexes. This puts nanometric coordination chemistry in a box that can be open or shut as necessary. Such second-sphere complexation can allow considerable control to be exerted on photocatalysis, electrocatalysis, and luminescent sensing involving polypyridineRu(II) compounds. The capturing states of hosts are symmetry-matched to guests for selective binding and display submicromolar affinities. A perching complex, which is an intermediate state between capturing and releasing states, is also demonstrated.


Assuntos
Complexos de Coordenação , Compostos Heterocíclicos , Rutênio , 2,2'-Dipiridil/química , Complexos de Coordenação/química , Rutênio/química , Água
20.
JACS Au ; 2(2): 531-540, 2022 Feb 28.
Artigo em Inglês | MEDLINE | ID: mdl-35253002

RESUMO

Herein, we show that the photoactive complexes [(Cp)Fe(arene)]+ (Cp = cyclopentadienyl; arene = C6H6, C6H5Me) act as latent catalysts that allow for photochemical control over the onset of alkyd paint curing, without the need for antiskinning agents such as the volatile 2-butanone oxime normally used to prevent curing during paint storage. The highly soluble neutral complexes [(Cp)Fe(Ch)] and [(Cp)Fe(Ch')] (Ch = cyclohexadienyl, Ch' = methylcyclohexadienyl) readily convert to the photoactive complexes [(Cp)Fe(arene)]+ upon oxidation in alkyd, allowing the latter to be dosed in a wide range of concentrations. Infrared and Raman studies show similar spectral changes of the alkyd paint matrix as have been observed in alkyd curing mediated by well-known, industrially applied cobalt- and manganese-based catalyst Co(neodecanoate)2 and [(Me3TACN)2Mn2(µ-OOCR)3](OOCR). The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)]+ system performs equally well as these cobalt- and manganese-based catalysts in terms of drying time and outperform the manganese catalyst by showing a hardness development (increase) similar to that of the cobalt-based catalyst. Based on electron paramagnetic resonance and light-activity studies, we propose that photolysis of [(Cp)Fe(arene)]+ generates short-lived active FeII species, explaining the desired latency. The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)]+ alkyd curing systems presented herein are unique examples of intrinsically latent paint curing catalysts that (1) are based on an abundant and harmless transition metal (Fe), (2) do not require any antiskinning agents, and (3) show favorable performance in terms of drying times and hardness development.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA