Thickness- and Twist-Angle-Dependent Interlayer Excitons in Metal Monochalcogenide Heterostructures.

Interlayer excitons, or bound electron-hole pairs whose constituent quasiparticles are located in distinct stacked semiconducting layers, are being intensively studied in heterobilayers of two-dimensional semiconductors. They owe their existence to an intrinsic type-II band alignment between both layers that convert these into p-n junctions. Here, we unveil a pronounced interlayer exciton (IX) in heterobilayers of metal monochalcogenides, namely, γ-InSe on ε-GaSe, whose pronounced emission is adjustable just by varying their thicknesses given their number of layers dependent direct band gaps. Time-dependent photoluminescense spectroscopy unveils considerably longer interlayer exciton lifetimes with respect to intralayer ones, thus confirming their nature. The linear Stark effect yields a bound electron-hole pair whose separation d is just (3.6 ± 0.1) Å with d being very close to dSe = 3.4 Å which is the calculated interfacial Se separation. The envelope of IX is twist-angle-dependent and describable by superimposed emissions that are nearly equally spaced in energy, as if quantized due to localization induced by the small moiré periodicity. These heterostacks are characterized by extremely flat interfacial valence bands making them prime candidates for the observation of magnetism or other correlated electronic phases upon carrier doping.

Electronic landscape of the f-electron intermetallics with the ThCr2Si2 structure.

Although strongly correlated f-electron systems are well known as reservoirs for quantum phenomena, a persistent challenge is to design specific states. What is often missing are simple ways to determine whether a given compound can be expected to exhibit certain behaviors and what tuning vector(s) would be useful to select the ground state. In this review, we address this question by aggregating information about Ce, Eu, Yb, and U compounds with the ThCr2Si2 structure. We construct electronic/magnetic state maps that are parameterized in terms of unit cell volumes and d-shell filling, which reveals useful trends including that (i) the magnetic and nonmagnetic examples are well separated, and (ii) the crossover regions harbor the examples with exotic states. These insights are used to propose structural/chemical regions of interest in these and related materials, with the goal of accelerating discovery of the next generation of f-electron quantum materials.

Investigating the A n+1B n X3n+1 Homologous Series: A New Platform for Studying Magnetic Praseodymium Based Intermetallics.

The recent discovery of the A n+1B n X3n+1 (A = lanthanide, B = transition metal, X = tetrel) homologous series provides a new platform to study the structure-property relationships of highly correlated electron systems. Several members of Ce n+1Co n Ge3n+1 (n = 1, 4, 5, 6, and ∞) show evidence of heavy electron behavior with complex magnetic interactions. While the Ce analogues have been investigated, only n = 1, 2, and ∞ of Pr n+1Co n Ge3n+1 have been synthesized, with n = 1 and 2 showing a nonsinglet magnetic ground state. The Pr analogues can provide a platform for direct comparison of highly correlated behavior. In this perspective, we discuss the impetus for synthesizing the Pr n+1Co n Ge3n+1 members and present the structural characterization of the n = 3 and n = 4 members. We lay the foundation for future investigations of the Pr n+1Co n Ge3n+1 family of compounds and highlight the importance of complementary methods to characterize new quantum materials.

It Runs in the BaAl4 Family: Relating the Structure and Properties of Middle Child Ln2Co3Ge5 (Ln = Pr, Nd, and Sm) to its Siblings LnCo2Ge2 and LnCoGe3.

The BaAl4 prototype structure and its derivatives have been identified to host several topological quantum materials and noncentrosymmetric superconductors. Single crystals up to ∼3 mm × 3 mm × 5 mm of Ln2Co3Ge5 (Ln = Pr, Nd, and Sm) are obtained via flux growth utilizing Sn as metallic flux. The crystal structure is isostructural to the Lu2Co3Si5 structure type in the crystallographic space group C2/c. The temperature-dependent magnetization indicates magnetic ordering at 30 K for all three compounds. Pr2Co3Ge5 and Nd2Co3Ge5 exhibit complex magnetic behavior with spin reorientations before ordering antiferromagnetically around 6 K, whereas Sm2Co3Ge5 shows a clear antiferromagnetic behavior at 26 K. The structures and properties of Ln2Co3Ge5 (Ln = Pr, Nd, and Sm) are compared to those of the ThCr2Si2 and BaNiSn3 structure types. Herein, we present the optimized crystal growth, structure, and physical properties of Ln2Co3Ge5 (Ln = Pr, Nd, and Sm).

Antiferromagnetic Order and Spin-Canting Transition in the Corrugated Square Net Compound Cu3(TeO4)(SO4)·H2O.

Strongly correlated electrons in layered perovskite structures have been the birthplace of high-temperature superconductivity, spin liquids, and quantum criticality. Specifically, the cuprate materials with layered structures made of corner-sharing square-planar CuO4 units have been intensely studied due to their Mott insulating ground state, which leads to high-temperature superconductivity upon doping. Identifying new compounds with similar lattice and electronic structures has become a challenge in solid-state chemistry. Here, we report the hydrothermal crystal growth of a new copper tellurite sulfate, Cu3(TeO4)(SO4)·H2O, a promising alternative to layered perovskites. The orthorhombic phase (space group Pnma) is made of corrugated layers of corner-sharing CuO4 square-planar units that are edge-shared with TeO4 units. The layers are linked by slabs of corner-sharing CuO4 and SO4. Using both the bond valence sum analysis and magnetization data, we find purely Cu2+ ions within the layers but a mixed valence of Cu2+/Cu+ between the layers. Cu3(TeO4)(SO4)·H2O undergoes an antiferromagnetic transition at TN = 67 K marked by a peak in the magnetic susceptibility. Upon further cooling, a spin-canting transition occurs at T* = 12 K, evidenced by a kink in the heat capacity. The spin-canting transition is explained on the basis of a J1-J2 model of magnetic interactions, which is consistent with the slightly different in-plane superexchange paths. We present Cu3(TeO4)(SO4)·H2O as a promising platform for the future doping and strain experiments that could tune the Mott insulating ground state into superconducting or spin liquid states.

Fantastic n = 4: Ce5Co4+xGe13-ySny of the An+1MnX3n+1 homologous series.

Ce-based intermetallics are of interest due to the potential to study the interplay of localized magnetic moments and conduction electrons. Our work on Ce-based germanides led to the identification of a new homologous series An+1MnX3n+1 (A = rare earth, M = transition metal, X = tetrels, and n = 1-6). This work presents the single-crystal growth, structure determination, and anisotropic magnetic properties of the n = 4 member of the Cen+1ConGe3n+1 homologous series. Ce5Co4+xGe13-ySny consists of three Ce sites, three Co sites, seven Ge sites, and two Sn sites, and the crystal structure is best modeled in the orthorhombic space group Cmmm where a = 4.3031(8) Å, b = 45.608(13) Å, and c = 4.3264(8) Å, which is in close agreement with the previously reported Sn-free analog where a = 4.265(1) Å, b = 45.175(9) Å, and c = 4.293(3) Å. Anisotropic magnetic measurements show Kondo-like behavior and three magnetic transitions at 6, 4.9, and 2.4 K for Ce5Co4+xGe13-ySny.

Evidence of a coupled electron-phonon liquid in NbGe2.

Whereas electron-phonon scattering relaxes the electron's momentum in metals, a perpetual exchange of momentum between phonons and electrons may conserve total momentum and lead to a coupled electron-phonon liquid. Such a phase of matter could be a platform for observing electron hydrodynamics. Here we present evidence of an electron-phonon liquid in the transition metal ditetrelide, NbGe2, from three different experiments. First, quantum oscillations reveal an enhanced quasiparticle mass, which is unexpected in NbGe2 with weak electron-electron correlations, hence pointing at electron-phonon interactions. Second, resistivity measurements exhibit a discrepancy between the experimental data and standard Fermi liquid calculations. Third, Raman scattering shows anomalous temperature dependences of the phonon linewidths that fit an empirical model based on phonon-electron coupling. We discuss structural factors, such as chiral symmetry, short metallic bonds, and a low-symmetry coordination environment as potential design principles for materials with coupled electron-phonon liquid.

Accessing new magnetic regimes by tuning the ligand spin-orbit coupling in van der Waals magnets.

Van der Waals (VdW) materials have opened new directions in the study of low dimensional magnetism. A largely unexplored arena is the intrinsic tuning of VdW magnets toward new ground states. Chromium trihalides provided the first such example with a change of interlayer magnetic coupling emerging upon exfoliation. Here, we take a different approach to engineer previously unknown ground states, not by exfoliation, but by tuning the spin-orbit coupling (SOC) of the nonmagnetic ligand atoms (Cl, Br, I). We synthesize a three-halide series, CrCl3 - x - y Br x I y , and map their magnetic properties as a function of Cl, Br, and I content. The resulting triangular phase diagrams unveil a frustrated regime near CrCl3. First-principles calculations confirm that the frustration is driven by a competition between the chromium and halide SOCs. Furthermore, we reveal a field-induced change of interlayer coupling in the bulk of CrCl3 - x - y Br x I y crystals at the same field as in the exfoliation experiments.

Crystal Structure and Electronic Properties of New Compound Zr6.5Pt6Se19.

A new ternary nonstoichiometric Zr6.5Pt6Se19 has been discovered as a part of effort to dope Zr into the layered transitional metal chalcogenide PtSe2. With a new structure type (oC68), it is the first Pt-based ternary chalcogenide with group 4 elements (Ti, Zr, and Hf). The crystal structure adopts the orthorhombic space group Cmmm with lattice parameters of a = 15.637(6) Å, b = 26.541(10) Å, c = 3.6581(12) Å, and V = 1518.2(9) Å3. This unusual structure consists of several building units: chains of edge-sharing selenium trigonal prisms and octahedra centered by zirconium atoms, chains of corner-shared square pyramid, and square planar centered by Pt atoms. The condensation of these building blocks forms a unique structure with bilayered Zr5.54Pt6Se19 slabs stacking along the b direction and large channels parallel to the c direction within the bilayered slabs. Band structure calculations suggest that partial occupancy of Zr atoms creates a pseudo gap at the Fermi level and is likely the main cause for the stability of this new phase.

Synthesis and Structure of a Nonstoichiometric Zr3.55Pt4Sb4 Compound.

A nonstoichiometric ternary antimonide, Zr3.55Pt4Sb4, with a new structure type (hP24), has been synthesized via arc-melting. Its crystal structure was determined by single-crystal X-ray diffraction with hexagonal space group P63/mmc and lattice parameters a = 4.391(3) Å, c = 30.53(2) Å, and V = 509.7(8) Å3. It features the unique Pt4Sb4 slab with Pt-Pt bonds and is reminiscent to hexagonal diamond substructures. Three different Zr atoms, occupying three different sites, aid in the close-packing of the Pt and Sb atoms. Electronic structure calculations show the half occupancy of one Zr site creates a pseudogap at the Fermi level and optimizes the Pt-Sb bonding interactions. This enhances the electronic stability and accounts for the very narrow phase width observed for this nonstoichiometric compound. Furthermore, strong Zr-Pt and Zr-Sb interactions play a crucial role in the chemical bonding of the title compound. Electrical transport measurements show metallic behavior of this compound down to 2 K, consistent with the band structure calculations.

Law and Disorder: Special Stacking Units-Building the Intergrowth Ce6Co5Ge16.

A new structure type of composition Ce6Co5Ge16 was grown out of a molten Sn flux. Ce6Co5Ge16 crystallizes in the orthorhombic space group Cmcm, with highly anisotropic lattice parameters of a = 4.3293(5) Å, b = 55.438(8) Å, and c = 4.3104(4) Å. The resulting single crystals were characterized by X-ray diffraction, and the magnetic and transport properties are presented. The Sn-stabilized structure of Ce6Co5Ge16 is based on the stacking of disordered Ce cuboctahedra and is an intergrowth of existing structure types including AlB2, BaNiSn3, and AuCu3. The stacking of structural subunits has previously been shown to be significant in the fields of superconductivity, quantum materials, and optical materials. Herein, we present the synthesis, characterization, and complex magnetic behavior of Ce6Co5Ge16 at low temperature, including three distinct magnetic transitions.

The Role of Crystal Growth Conditions on the Magnetic Properties of Ln2Fe4- xCo xSb5 (Ln = La and Ce).

Single crystals of Ln2Fe4- xCo xSb5- yBi y (Ln = La, Ce; 0 ≤ x < 0.5; 0 ≤ y ≤ 0.2) were grown using Bi flux and self-flux methods. The compounds adopt the La2Fe4Sb5 structure type with tetragonal space group I4/ mmm. The La2Fe4Sb5 structure type is comprised of rare earth atoms capping square Sb nets in a square antiprismatic fashion and two transition-metal networks forming a PbO-type layer with Sb and transition-metal isosceles triangles. Substituting Co into the transition-metal sublattice results in a decrease in the transition temperature and reduced frustration, indicative of a transition from localized to itinerant behavior. In this manuscript, we demonstrated that Bi can be used as an alternate flux to grow single crystals of antimonides. Even with the incorporation of Bi into the Sb square net, the magnetic properties are not significantly affected. In addition, we have shown that the incorporation of Co into the Fe triangular sublattice leads to an itinerant magnetic system.

Spin density wave instability in a ferromagnet.

Due to its cooperative nature, magnetic ordering involves a complex interplay between spin, charge, and lattice degrees of freedom, which can lead to strong competition between magnetic states. Binary Fe3Ga4 is one such material that exhibits competing orders having a ferromagnetic (FM) ground state, an antiferromagnetic (AFM) behavior at intermediate temperatures, and a conspicuous re-entrance of the FM state at high temperature. Through a combination of neutron diffraction experiments and simulations, we have discovered that the AFM state is an incommensurate spin-density wave (ISDW) ordering generated by nesting in the spin polarized Fermi surface. These two magnetic states, FM and ISDW, are seldom observed in the same material without application of a polarizing magnetic field. To date, this unusual mechanism has never been observed and its elemental origins could have far reaching implications in many other magnetic systems that contain strong competition between these types of magnetic order. Furthermore, the competition between magnetic states results in a susceptibility to external perturbations allowing the magnetic transitions in Fe3Ga4 to be controlled via temperature, magnetic field, disorder, and pressure. Thus, Fe3Ga4 has potential for application in novel magnetic memory devices, such as the magnetic components of tunneling magnetoresistance spintronics devices.

Casting a Wider Net: Rational Synthesis Design of Low-Dimensional Bulk Materials.

The discovery of novel magnetic and electronic properties in low-dimensional materials has led to the pursuit of hierarchical materials with specific substructures. Low-dimensional solids are highly anisotropic by nature and show promise in new quantum materials leading to exotic physical properties not realized in three-dimensional materials. We have the opportunity to extend our synthetic strategy of the flux-growth method to designing single crystalline low-dimensional materials in bulk. The goal of this Account is to highlight the synthesis and physical properties of several low-dimensional intermetallic compounds containing specific structural motifs that are linked to desirable magnetic and electrical properties. We turned our efforts toward intermetallic compounds consisting of antimony nets because they are closely linked to properties such as high carrier mobility (the velocity of an electron moving through a material under a magnetic field) and large magnetoresistance (the change in resistivity with an applied magnetic field), both of which are desirable properties for technological applications. The SmSb2 structure type is of particular interest because it is comprised of rectangular antimony nets and rare earth ions stacked between the antimony nets in a square antiprismatic environment. LnSb2 (Ln = La-Nd, Sm) have been shown to be highly anisotropic with SmSb2 exhibiting magnetoresistance of over 50000% for H∥c axis and ∼2400% for H∥ab. Using this structure type as an initial building block, we envision the insertion of transition metal substructures into the SmSb2 structure type to produce ternary materials. We describe compounds adopting the HfCuSi2 structure type as an insertion of a tetrahedral transition metal-antimony subunit into the LnSb2 host structure. We studied LnNi1-xSb2 (Ln = Y, Gd-Er), where positive magnetoresistance reaching above 100% was found for the Y, Gd, and Ho analogues. We investigated the influence of the transition metal sublattice by substituting Ni into Ce(Cu1-xNix)ySb2 (y < 0.8) and found that the material is highly anisotropic and metamagnetic transitions appear at ∼0.5 and 1 T in compounds with higher Ni concentration. Metamagnetism is characterized by a sharp increase in the magnetic response of a material with increasing applied magnetic field, which was also observed in LnSb2 (Ln = Ce-Nd). We also endeavored to study materials that possess a transition metal sublattice with the potential for geometric frustration. An example is the La2Fe4Sb5 structure type, which consists of antimony square nets and an iron-based network arranged in nearly equilateral triangles, a feature found in magnetically frustrated systems. We discovered spin glass behavior in Ln2Fe4Sb5 (Ln = La-Nd, Sm) and evidence that the transition metal sublattice contributes to the magnetic interactions of Ln2Fe4Sb5. We investigated the magnetic properties of Pr2Fe4-xCoxSb5 (x < 2.3) and found that as the Co concentration increases, a second magnetic transition leads from a localized to an itinerant system. The La2Fe4Sb5 structure type is quite robust and allows for the incorporation of other transition metals, thereby making it an excellent candidate to study competing magnetic interactions in lanthanide-containing intermetallic compounds. In this manuscript, we aim to share our experiences of bulk intermetallic compounds to inspire the development of new low-dimensional materials.

Correlated states in ß-Li2IrO3 driven by applied magnetic fields.

Magnetic honeycomb iridates are thought to show strongly spin-anisotropic exchange interactions which, when highly frustrated, lead to an exotic state of matter known as the Kitaev quantum spin liquid. However, in all known examples these materials magnetically order at finite temperatures, the scale of which may imply weak frustration. Here we show that the application of a relatively small magnetic field drives the three-dimensional magnet ß-Li2IrO3 from its incommensurate ground state into a quantum correlated paramagnet. Interestingly, this paramagnetic state admixes a zig-zag spin mode analogous to the zig-zag order seen in other Mott-Kitaev compounds. The rapid onset of the field-induced correlated state implies the exchange interactions are delicately balanced, leading to strong frustration and a near degeneracy of different ground states.Materials with a Kitaev spin liquid ground state are sought after as models of quantum phases but candidates so far form either zig-zag or incommensurate magnetic order. Ruiz et al. find a crossover between these states in ß-Li2IrO3 under weak magnetic fields, indicating strongly frustrated spin interactions.

Nanoimprinted Perovskite Nanograting Photodetector with Improved Efficiency.

Recently, organolead halide-based perovskites have emerged as promising materials for optoelectronic applications, particularly for photovoltaics, photodetectors, and lasing, with low cost and high performance. Meanwhile, nanoscale photodetectors have attracted tremendous attention toward realizing miniaturized optoelectronic systems, as they offer high sensitivity, ultrafast response, and the capability to detect beyond the diffraction limit. Here we report high-performance nanoscale-patterned perovskite photodetectors implemented by nanoimprint lithography (NIL). The spin-coated lead methylammonium triiodide perovskite shows improved crystallinity and optical properties after NIL. The nanoimprinted metal-semiconductor-metal photodetectors demonstrate significantly improved performance compared to the nonimprinted conventional thin-film devices. The effects of NIL pattern geometries on the optoelectronic characteristics were studied, and the nanograting pattern based photodetectors demonstrated the best performance, showing approximately 35 times improvement on responsivity and 7 times improvement on on/off ratio compared with the nonimprinted devices. The high performance of NIL-nanograting photodetectors likely results from high crystallinity and favored nanostructure morphology, which contribute to higher mobility, longer diffusion length, and better photon absorption. Our results have demonstrated that the NIL is a cost-effective method to fabricate high-performance perovskite nanoscale optoelectronic devices, which may be suitable for manufacturing of high-density perovskite nanophotodetector arrays and to provide integration with state-of-the-art electronic circuits.

Thermal stability of mullite RMn2O5 (R = Bi, Y, Pr, Sm or Gd): combined density functional theory and experimental study.

Understanding and effectively predicting the thermal stability of ternary transition metal oxides with heavy elements using first principle simulations are vital for understanding performance of advanced materials. In this work, we have investigated the thermal stability of mullite RMn2O5 (R = Bi, Pr, Sm, or Gd) structures by constructing temperature phase diagrams using an efficient mixed generalized gradient approximation (GGA) and the GGA + U method. Simulation predicted stability regions without corrections on heavy elements show a 4-200 K underestimation compared to our experimental results. We have found the number of d/f electrons in the heavy elements shows a linear relationship with the prediction deviation. Further correction on the strongly correlated electrons in heavy elements could significantly reduce the prediction deviations. Our corrected simulation results demonstrate that further correction of R-site elements in RMn2O5 could effectively reduce the underestimation of the density functional theory-predicted decomposition temperature to within 30 K. Therefore, it could produce an accurate thermal stability prediction for complex ternary transition metal oxide compounds with heavy elements.

Corrosion behavior of zirconia in acidulated phosphate fluoride.

OBJECTIVE: The corrosion behavior of zirconia in acidulated phosphate fluoride (APF) representing acidic environments and fluoride treatments was studied. MATERIAL AND METHODS: Zirconia rods were immersed in 1.23% and 0.123% APF solutions and maintained at 37°C for determined periods of time. Surfaces of all specimens were imaged using digital microscopy and scanning electron microscopy (SEM). Sample mass and dimensions were measured for mass loss determination. Samples were characterized by powder X-ray diffraction (XRD) to detect changes in crystallinity. A biosensor based on electrochemical impedance spectroscopy (EIS) was used to detect ion dissolution of material into the immersion media. RESULTS: Digital microscopy revealed diminishing luster of the materials and SEM showed increased superficial corrosion of zirconia submerged in 1.23% APF. Although no structural change was found, the absorption of salts (sodium phosphate) onto the surface of the materials bathed in 0.123% APF was significant. EIS indicated a greater change of impedance for the immersion solutions with increasing bathing time. CONCLUSION: Immersion of zirconia in APF solutions showed deterioration limited to the surface, not extending to the bulk of the material. Inferences on zirconia performance in acidic oral environment can be elucidated from the study.