Your browser doesn't support javascript.
Mostrar: 20 | 50 | 100
Resultados 1 - 10 de 10
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Opt Express ; 27(22): 32168-32183, 2019 Oct 28.
Artigo em Inglês | MEDLINE | ID: mdl-31684434

RESUMO

High-birefringence liquid crystal (LC) in ultrathin LCOS panels was adopted to prepare high phase precision (mSTD =λ/50) and phase accuracy (mAPAE% ∼8%) with suppressed pixel-level crosstalk effects. In conjunction with optimized digital driving scheme, the zero order light loss was found directly related to the phase accuracy error. Meanwhile, the world's fastest pure phase modulation LCOS with a response time of ∼0.87 ms at 45 °C was also achieved. The low-temporal flicker (P-P ∼2.0%) with high-speed LC responses was demonstrated by applying new digital driving scheme. Finally, the 4K2 K LCOS-SLM (∼7000 PPI) was evaluated its difficulties and opportunities.

2.
Opt Express ; 25(17): 20466-20476, 2017 Aug 21.
Artigo em Inglês | MEDLINE | ID: mdl-29041727

RESUMO

This study presents the low cost fabrication of flexible white-light-emitting diodes (w-LEDs) with nano-honeycomb-structured phosphor films. Extending the dimensions of the nano-honeycomb structures improved the color uniformity of the flexible samples, and the 950-nm pattern sample demonstrated optimal color uniformity because this nano-pattern exhibited an excellent diffusion ability owing to its pitch size. In addition to color uniformity, the use of this nano-pattern improved the luminous efficiency. The 750-nm pattern exhibited the highest luminous efficiency (235.8 lm/W), which was approximately 7% higher than that exhibited by a non-patterned phosphor film sample. Thus, flexible w-LEDs with nano-honeycomb structure optimization have great potential to be used as next-generation lighting sources.

3.
ACS Appl Mater Interfaces ; 9(40): 35279-35286, 2017 Oct 11.
Artigo em Inglês | MEDLINE | ID: mdl-28891282

RESUMO

This study developed flexible light-emitting diodes (LEDs) with warm white and neutral white light. A simple ultraviolet flip-chip sticking process was adopted for the pumping source and combined with polymer and quantum dot (QD) films technology to yield white light. The polymer-blended flexible LEDs exhibited higher luminous efficiency than the QD-blended flexible LEDs. Moreover, the polymer-blended LEDs achieved excellent color-rendering index (CRI) values (Ra = 96 and R9 = 96), with high reliability, demonstrating high suitability for special applications like accent, down, or retrofit lights in the future. In places such as a museum, kitchen, or surgery room, its high R9 and high CRI characteristics can provide high-quality services.

4.
Opt Express ; 24(17): 19032-9, 2016 Aug 22.
Artigo em Inglês | MEDLINE | ID: mdl-27557183

RESUMO

This study presents an approach for patterning a polydimethylsiloxane (PDMS) phosphor film with a photonic crystal nano-honeycomb structure on a blue chip package. A phosphor film with a nano-honeycomb structure was patterned and transferred using a nanosphere and used for fabricating remote white light-emitting diodes (w-LEDs). The angular correlated color temperature deviation of the remote phosphor LED could be improved by varying nano-honeycomb structure pitches (450, 750, and 1150 nm). In particular, w-LED samples with excellent color uniformity (ΔCCT ranging from 940 to 440 K) were fabricated from 750-nm w-LED samples with nano-honeycomb-patterned tops.

5.
Sci Rep ; 6: 23563, 2016 Mar 23.
Artigo em Inglês | MEDLINE | ID: mdl-27005829

RESUMO

In this study, a novel photoluminescent quantum dots device with laser-processed microscale patterns has been demonstrated to be used as a white light emitting source. The pulsed laser ablation technique was employed to directly fabricate microscale square holes with nano-ripple structures onto the sapphire substrate of a flip-chip blue light-emitting diode, confining sprayed quantum dots into well-defined areas and eliminating the coffee ring effect. The electroluminescence characterizations showed that the white light emission from the developed photoluminescent quantum-dot light-emitting diode exhibits stable emission at different driving currents. With a flexibility of controlling the quantum dots proportions in the patterned square holes, our developed white-light emitting source not only can be employed in the display applications with color triangle enlarged by 47% compared with the NTSC standard, but also provide the great potential in future lighting industry with the correlated color temperature continuously changed in a wide range.

6.
Opt Express ; 24(2): A341-9, 2016 Jan 25.
Artigo em Inglês | MEDLINE | ID: mdl-26832586

RESUMO

A novel combination of blue LED chips, transparent glass substrates and phosphors with PDMS thin film is demonstrated. The flip-chip bonding technology is applied to facilitate this design. The ZrO(2) nanoparticles are also doped into the PDMS film to increase light scattering. The resultant luminous efficiency shows an 11% enhancement when compared to the regular COG device. The variation of correlated color temperature of such devices is also reduced to 132K. In addition to these changes, the surface temperature is reduced from 121°C to 104°C due to good thermal dissipation brought by ZrO(2) nanoparticles.

7.
Opt Express ; 23(25): 32504-15, 2015 Dec 14.
Artigo em Inglês | MEDLINE | ID: mdl-26699040

RESUMO

Colloidal quantum dots which can emit red, green, and blue colors are incorporated with a micro-LED array to demonstrate a feasible choice for future display technology. The pitch of the micro-LED array is 40 µm, which is sufficient for high-resolution screen applications. The method that was used to spray the quantum dots in such tight space is called Aerosol Jet technology which uses atomizer and gas flow control to obtain uniform and controlled narrow spots. The ultra-violet LEDs are used in the array to excite the red, green and blue quantum dots on the top surface. To increase the utilization of the UV photons, a layer of distributed Bragg reflector was laid down on the device to reflect most of the leaked UV photons back to the quantum dot layers. With this mechanism, the enhanced luminous flux is 194% (blue), 173% (green) and 183% (red) more than that of the samples without the reflector. The luminous efficacy of radiation (LER) was measured under various currents and a value of 165 lm/Watt was recorded.

8.
Opt Express ; 23(3): 3230-5, 2015 Feb 09.
Artigo em Inglês | MEDLINE | ID: mdl-25836181

RESUMO

We report ultrafast excited state dynamics of zinc phthalocyanine and zinc hexadecafluoro phthalocyanine thin films which have nanorod-like structures. Excitons in the singlet states undergo multi-exponential relaxation processes to the ground state and the singlet lifetime within a few tens of picoseconds is attributed to the diffusion-limited exciton annihilation process. Diffusive migration of the singlet excitons shows the anisotropic lifetimes depending on the polarization of probe beam. Similar anisotropy is observed in the X-ray diffraction data which exhibits long-range alignment of molecular columns along the long axis of nanorod, whereas disordered arrangement in lateral direction to the axis of nanorod.

9.
Opt Express ; 23(3): A27-33, 2015 Feb 09.
Artigo em Inglês | MEDLINE | ID: mdl-25836249

RESUMO

This study demonstrates the application of DBR structure into the remote phosphor structure to improve the angular correlated color temperature (CCT) deviation in white light-emitting diodes (WLEDs). In the experiment, the LED device with DBR structure yielded a higher luminous efficiency than a conventional structure. The CCT deviation can be improved from 1758K to 280K in a range of -70 to 70 degree and the luminous flux increases more than 10% due to the enhancement of the light extraction of the blue light. Moreover, the reflectance of the different DBR structures is analyzed with different angles to reveal the reasons of such improvements. As the result, this LED device with DBR structure shows the great potential to use as the next generation lighting source.

10.
Appl Opt ; 50(27): 5299-302, 2011 Sep 20.
Artigo em Inglês | MEDLINE | ID: mdl-21947049

RESUMO

Because of the nonuniform electric field of the in-plane-switching cell in the thickness direction, an accurate and efficient way for evaluating the Kerr constant of blue-phase liquid crystal (BPLC) needs to be developed. This study demonstrates a method for evaluating the Kerr constant by measuring the off-axis-induced retardation (R(th)) change in normal vertical field cells using a commercial polarimeter. The angle-dependent behavior of the R(th) change is observed as an electric-tunable positive C retarder. In this paper, a sigmoid fitting model has been chosen for calculating the Kerr constant for considering the very small intrinsic birefringence of the BPLC.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA