Integration of Open Metal Sites in an Amino-Functionalized Sm(III)-Organic Framework toward Enhanced Third-Order Nonlinear Optical Property.

A variety of new inorganic and organic materials have emerged to advance laser technologies and optical engineering. A rational design approach can contribute significantly to fabricating nonlinear optically active metal-organic frameworks (MOFs) by considering the underlying structure-property linkage. Here, it has been embarked on a study of novel samarium(III) MOF, ([Sm2(ata)3(DMF)4]·DMF (ata2-: 2-aminoterephthalate), abbreviated as NH2-Sm-MUM-4) with enhanced nonlinear optical (NLO) properties. The crystal structure of this MOF represents a 6-connected framework with a pcu topology and distinctive characteristics, including open metal sites, free amine groups, and great stability, making it suitable for third-order NLO activity. The nonlinear index of refraction (n2) revealed the self-focusing impacts of NH2-Sm-MUM-4 at different incident intensities. The highest value of n2 and ß related to 10 mw power of incident intensity are 5.15 cm2/W and 2.65 cm/W, respectively. As far as the authors know, this is the first study examining the potential systematic structural-property associations in Sm-MOFs considering improved third-order NLO properties.

Helically chiral multiresonant thermally activated delayed fluorescent emitters and their use in hyperfluorescent organic light-emitting diodes.

Chiral multiresonant thermally activated delayed fluorescence (MR-TADF) materials show great potential as emitters in circularly polarized (CP) organic light-emitting diodes (CP-OLEDs) owing to their bright and narrowband CP emission. Here, two new chiral MR-TADF emitters tBuPh-BN and DPA-tBuPh-BN possessing intrinsically helical chirality have been synthesized and studied. The large steric interactions between the tert-butylphenyl groups not only induce the helical chirality but also provide a notable configurational stability to the enantiomers. Racemic mixtures of tBuPh-BN and DPA-tBuPh-BN show narrowband emission at 490 and 477 nm with full-width at half maximum (FWHM) of 25 and 28 nm and photoluminescence quantum yields, Φ PL, of 85 and 54% in toluene. The separated enantiomers of tBuPh-BN and DPA-tBuPh-BN show symmetric circularly polarized luminescence (CPL) with respective dissymmetry factors |g PL| values of 1.5 × 10-3 and 0.9 × 10-3. The hyperfluorescence organic light-emitting diodes (HF-OLEDs) with tBuPh-BN and DPA-tBuPh-BN acting as terminal emitters and 2,3,4,5,6-penta-(9H-carbazol-9-yl)benzonitrile (5CzBN) as their assistant dopant exhibited, respectively, maximum external quantum efficiencies (EQEmax) of 20.9 and 15.9% at 492 and 480 nm with FWHM of 34 and 38 nm. This work demonstrates a strategy for developing intrinsically helically chiral MR-TADF emitters possessing significant configurational stability, which can be used in HF-OLEDs.

Methyl 2-[(Z)-5-bromo-2-oxoindolin-3-yl-idene]-hydrazinecarbodi-thio-ate.

The title compound, C10H8BrN3OS2, a brominated di-thio-carbazate imine deriv-ative, was obtained from the condensation reaction of S-methyl-dithio-carbazate (SMDTC) and 5-bromo-isatin. The essentially planar mol-ecule exhibits a Z configuration, with the di-thio-carbazate and 5-bromo-isatin fragments located on the same sides of the C=N azomethine bond, which allows for the formation of an intra-molecular N-H⋯Ob (b = bromo-isatin) hydrogen bond generating an S(6) ring motif. In the crystal, adjacent mol-ecules are linked by pairs of N-H⋯O hydrogen bonds, forming dimers characterized by an R 2 2(8) loop motif. In the extended structure, mol-ecules are linked into a three-dimensional network by C-H⋯S and C-H⋯Br hydrogen bonds, C-Br⋯S halogen bonds and aromatic π-π stacking.

A Mononuclear [PtCl(tpy)]PF6 Complex for a Yellow Emitting Solution-Processable Organic Light Emitting Diode.

We report square planar mononuclear Pt(II)-complexes of terpyridines in the form of [PtCl(L1/L2)]PF6 as phosphorescent emitters (where L1 = 4-(3-pyridine)2,2':6',2''-terpyridine and L2 = 4'-(3-pyridinyl)-4,4''-di(tert-butyl)-2,2':6'2''-terpyridine). Complex 2 showed emission at 534 nm in the DCM solution with photoluminescence quantum efficiency (ΦPL) = 14%, while in the mCBP host (5-wt % doped), the emission shifted to 584 nm with ΦPL = 37.8% and a phosphorescence lifetime (τphos) of 37.8 µs. Complex 2 in mCBP was used to fabricate a solution-processed phosphorescent organic light-emitting diode (PhOLED) which showed maximum external quantum efficiency (EQEmax) = 7.4% with yellow emission at λEL = 570 nm and exhibited a low efficiency roll-off with an EQE drop to 7.0% at 1000 cd/m2.

One-Pot Access to Functionalised Malamides via Organocatalytic Enantioselective Formation of Spirocyclic ß-Lactone-Oxindoles and Double Ring-Opening.

Malamides (diamide derivatives of malic acid) are prevalent in nature and of significant biological interest, yet only limited synthetic methods to access functionalised enantiopure derivatives have been established to date. Herein, an effective synthetic method to generate this molecular class is developed through in situ formation of spirocyclic ß-lactone-oxindoles (employing a known enantioselective isothiourea-catalysed formal [2+2] cycloaddition of C(1)-ammonium enolates and isatin derivatives) followed by a subsequent dual ring-opening protocol (of the ß-lactone and oxindole) with amine nucleophiles. The application of this protocol is demonstrated across twelve examples to give densely functionalised malamide derivatives with high enantio- and diastereo-selectivity (up to >95:5 dr and >99:1 er).

Isothiourea-Catalysed Acylative Kinetic Resolution of Tertiary Pyrazolone Alcohols.

The development of methods for the selective acylative kinetic resolution (KR) of tertiary alcohols is a recognised synthetic challenge with relatively few successful substrate classes reported to date. In this manuscript, a highly enantioselective isothiourea-catalysed acylative KR of tertiary pyrazolone alcohols is reported. The scope and limitations of this methodology have been developed, with high selectivity observed across a broad range of substrate derivatives incorporating varying substitution at N(2)-, C(4)- and C(5)-, as well as bicyclic constraints within the pyrazolone scaffold (30 examples, selectivity factors (s) typically >100) at generally low catalyst loadings (1 mol%). The application of this KR method to tertiary alcohols derived from a natural product (geraniol), alongside pharmaceutically relevant drug compounds (indomethacin, gemfibrozil and probenecid), with high efficiency (s > 100) is also described. The KR process is readily amenable to scale up, with effective resolution on a 50 g (0.22 mol) scale demonstrated. The key structural motif leading to excellent selectivity in this KR process has been probed through computation, with an NC=O•••isothiouronium interaction observed within the favoured transition state. Similarly, the effect of C(5)-aryl substitution that leads to reduced experimental selectivity is probed, with a competitive π-isothiouronium interaction identified as leading to reduced selectivity.

A Well-Defined Magnesium Complex of C70 6.

Controlling and understanding charge state and metal coordination in carbon nanomaterials is crucial to harnessing their unique properties. Here we describe the synthesis of the well-defined fulleride complex [{(Mesnacnac)Mg}6C70], 2, (Mesnacnac)=HC(MeCNMes)2, Mes=2,4,6-Me3C6H2, from the reaction of the ß-diketiminate magnesium(I) complex [{(Mesnacnac)Mg}2] with C70 in aromatic solvents. The molecular structure of complex 2 was determined, providing the first high-quality structural study of a complex with the C70 6- ion. In combination with solution state NMR spectroscopic and DFT computational studies, the changes in geometry and charge distribution in the various atom and bond types of the fulleride unit were investigated. Additionally, the influence of the (Mesnacnac)Mg+ cations on the global and local fulleride coordination environment was examined.

Synthesis and Analysis of (γ,γ',γ''-Trifluoro)neopentyl (TFNP) Aryl Ethers as a Polar Fluoroaliphatic Motif.

A route is developed to (γ,γ',γ'''-trifluoro)neopentyl (TFNP) aryl ethers to extend the methods for the introduction of the tert-butyl group, carrying a fluorine on each of the methyl substituents. The route combines neopentyltosylate 3 with phenols and thiophenols to give efficient substitution reactions to the corresponding TFNP aryl ethers. The three C-F bonds adopt a helical propeller conformation as revealed by computation and single crystal X-ray structure analysis. The LogPs of TFNP ethers are lower (more hydrophilic) than their neopentyl analogues. The metabolism of selected TFNP ethers was explored in the fungus Cunninghamella elegans.

De-epimerizing DyKAT of ß-lactones generated by isothiourea-catalysed enantioselective [2 + 2] cycloaddition.

An enantioselective isothiourea-catalysed [2 + 2] cycloaddition of C(1)-ammonium enolates with pyrazol-4,5-diones is used to construct spirocyclic ß-lactones in good yields, excellent enantioselectivity (99 : 1 er) but with modest diastereocontrol (typically 70 : 30 dr). Upon ring-opening with morpholine or alternative nucleophilic amines and alcohols ß-hydroxyamide and ß-hydroxyester products are generated with enhanced diastereocontrol (up to >95 : 5 dr). Control experiments show that stereoconvergence is observed in the ring-opening of diastereoisomeric ß-lactones, leading to a single product (>95 : 5 dr, >99 : 1 er). Mechanistic studies and DFT analysis indicate a substrate controlled Dynamic Kinetic Asymmetric Transformation (DyKAT) involving epimerisation at C(3) of the ß-lactone under the reaction conditions, coupled with a hydrogen bond-assisted nucleophilic addition to the Si-face of the ß-lactone and stereodetermining ring-opening. The scope and limitations of a one-pot protocol consisting of isothiourea-catalysed enantio-determining [2 + 2] cycloaddition followed by diastereo-determining ring-opening are subsequently developed. Variation within the anhydride ammonium enolate precursor, as well as N(1) and C(3) within the pyrazol-4,5-dione scaffold is demonstrated, giving a range of functionalised ß-hydroxyamides with high diastereo- and enantiocontrol (>20 examples, up to >95 : 5 dr and >99 : 1 er) via this DyKAT.

Enantioselective Synthesis in Continuous Flow: Polymer-Supported Isothiourea-Catalyzed Enantioselective Michael Addition-Cyclization with α-Azol-2-ylacetophenones.

A packed reactor bed incorporating a polymer-supported isothiourea HyperBTM catalyst derivative has been used to promote the enantioselective synthesis of a range of heterocyclic products derived from α-azol-2-ylacetophenones and -acetamides combined with alkyl, aryl, and heterocyclic α,ß-unsaturated homoanhydrides in continuous flow via an α,ß-unsaturated acyl-ammonium intermediate. The products are generated in good to excellent yields and generally in excellent enantiopurity (up to 97:3 er). Scale-up is demonstrated on a 15 mmol scale, giving the heterocyclic product in 68% overall yield with 98:2 er after recrystallization.

Alkyl backbone variations in common ß-diketiminate ligands and applications to N-heterocyclic silylene chemistry.

We report the extension of the common ß-diketimine proligand class, RArnacnacH (HC(RCNAr)2H), where R is an alkyl group such as Et or iPr, plus Ph, and Ar is a sterically demanding aryl substituent such as Dip = 2,6-diispropylphenyl, Dep = 2,6-diethylphenyl, Mes = 2,4,6-trimethylphenyl or mesityl, Xyl = 2,6-dimethylphenyl, via one-pot condensation procedures. When a condensation reaction is carried out using the chemical dehydrating agent PPSE (polyphosphoric acid trimethylsilylester), ß-diketiminate phosphorus(V) products such as (iPrMesnacnac)PO2 can also be obtained, which can be converted to the respective proligand iPrMesnacnacH via alkaline hydrolysis. The RArnacnacH proligands can be converted to their alkali metal complexes with common methods and we have found that deprotonation of iPrDipnacnacH is significantly more sluggish than that of related ß-diketimines with smaller backbone alkyl groups. The basicity of the RArnacnac- anions can play a role in the success of their salt metathesis chemistry and we have prepared and structurally characterised the EtDipnacnac-derived silicon(II) compounds (EtDipnacnac)SiBr and (EtDipnacnac')Si, where EtDipnacnac' is the deprotonated variant MeCHC(NDip)CHC(NDip)Et.

Anticancer, antimicrobial and photocatalytic activities of a new pyrazole containing thiosemicarbazone ligand and its Co(III) and Ni(II) complexes: Synthesis, spectroscopic characterization and X-ray crystallography.

A new pyrazole based thiosemicarbazone ligand, 5-methyl-3-formylpyrazole-N(4)-isopropylthiosemicarbazone, (HMPzNHPri) (compound I), and its cobalt(III) and nickel(II) complexes, [Co(MPzNHPri)2]Cl (compound II) and [Ni(HMPzNHPri)2]Br2 (compound III), respectively, have been synthesized and characterized through various physico-chemical and spectroscopic studies. Both the reported Co(III) and Ni(II) complexes are cationic in nature and behave as 1:1 and 1:2 electrolytes in MeOH, respectively. Electronic spectral features of the complexes have classified them as distorted octahedral ones. IR spectral data (4000-450 cm-1) have suggested a monoprotic tridentate (NNS) function of compound I coordinating to the Co(III) ion via the pyrazolyl (tertiary) ring nitrogen, azomethine nitrogen and thiolato sulphur atom; while for compound III, compound I has been found to act as neutral NNS tridentate one, coordinating to Ni(II) via the pyrazolyl iminic nitrogen, azomethine nitrogen and thioketo sulphur. Structural features of all the compounds are confirmed by the single crystal X-ray data. All the compounds reported here have been found to exhibit significant photocatalytic activity towards degradation of Methylene Blue (MB) under UV radiation. Anticancer activity of all the three compounds against cancer cell lines (HeLa and A549) and a normal cell line (HEK293) have been investigated. Compound II has been found to be more efficient against the human cervical cancer cell (HeLa) and the lung cancer cell (A549) than compounds I and III. The ligand and both the complexes display potential activities against both gram-positive (Bacillus subtilis MTCC 7193) and gram-negative bacteria (E. coli MTCC 1610).

Isothiourea-Catalysed Acylative Dynamic Kinetic Resolution of Tetra-substituted Morpholinone and Benzoxazinone Lactols.

The development of methods to allow the selective acylative dynamic kinetic resolution (DKR) of tetra-substituted lactols is a recognised synthetic challenge. In this manuscript, a highly enantioselective isothiourea-catalysed acylative DKR of tetra-substituted morpholinone and benzoxazinone-derived lactols is reported. The scope and limitations of this methodology have been developed, with high enantioselectivity and good to excellent yields (up to 89 %, 99 : 1 er) observed across a broad range of substrate derivatives incorporating substitution at N(4) and C(2), di- and spirocyclic substitution at C(5) and C(6), as well as benzannulation (>35 examples in total). The DKR process is amenable to scale-up on a 1 g laboratory scale. The factors leading to high selectivity in this DKR process have been probed through computation, with an N-C=O⋅⋅⋅isothiouronium interaction identified as key to producing ester products in highly enantioenriched form.

Synthesis of Tetra-Substituted 3-Hydroxyphthalide Esters by Isothiourea-Catalysed Acylative Dynamic Kinetic Resolution.

A general and highly enantioselective method for the preparation of tetra-substituted 3-hydroxyphthalide esters via isothiourea-catalysed acylative dynamic kinetic resolution (DKR) is reported. Using (2S,3R)-HyperBTM (5 mol %) as the catalyst, the scope and limitations of this methodology have been extensively probed, with high enantioselectivity and good to excellent yields observed (>40 examples, up to 99 %, 99 : 1 er). Substitution of the aromatic core within the 3-hydroxyphthalide skeleton, as well as aliphatic and aromatic substitution at C(3), is readily tolerated. A diverse range of anhydrides, including those from bioactive and pharmaceutically relevant acids, can also be used. The high enantioselectivity observed in this DKR process has been probed computationally, with a key substrate heteroatom donor O⋅⋅⋅acyl-isothiouronium interaction identified through DFT analysis as necessary for enantiodiscrimination.

Poly[3-methyl-pyridinium [(µ2-di-hydrogen phosphito)bis(µ3-hydrogen phosphito)dizinc]].

In the title compound, {(C6H8N)[Zn2(HPO3)2(H2PO3)]}n, the constituent ZnO4, HPO3 and H2PO3 polyhedra of the inorganic component are linked into (010) sheets by Zn-O-P bonds (mean angle = 134.4°) and the layers are reinforced by O-H⋯O hydrogen bonds. The protonated templates are anchored to the inorganic sheets via bifurcated N-H⋯(O,O) hydrogen bonds.

4-Fluoro-benzyl (Z)-2-(2-oxoindolin-3-yl-idene)hydrazine-1-carbodi-thio-ate.

The title compound, C16H12FN3OS, a fluorinated di-thio-carbazate imine derivative, was synthesized by the one-pot, multi-component condensation reaction of hydrazine hydrate, carbon di-sulfide, 4-fluoro-benzyl chloride and isatin. The compound demonstrates near-planarity across much of the mol-ecule in the solid state and a Z configuration for the azomethine C=N bond. The Z form is further stabilized by the presence of an intra-molecular N-H⋯O hydrogen bond. In the extended structure, mol-ecules are linked into dimers by N-H⋯O hydrogen bonds and further connected into chains along either [20] or [100] by weak C-H⋯S and C-H⋯F hydrogen bonds, which further link into corrugated sheets and in combination form the overall three-dimensional network.

Synthesis and Structural Studies of peri-Substituted Acenaphthenes with Tertiary Phosphine and Stibine Groups.

Two mixed peri-substituted phosphine-chlorostibines, Acenap(PiPr2)(SbPhCl) and Acenap(PiPr2)(SbCl2) (Acenap = acenaphthene-5,6-diyl) reacted cleanly with Grignard reagents or nBuLi to give the corresponding tertiary phosphine-stibines Acenap(PiPr2)(SbRR') (R, R' = Me, iPr, nBu, Ph). In addition, the Pt(II) complex of the tertiary phosphine-stibine Acenap(PiPr2)(SbPh2) as well as the Mo(0) complex of Acenap(PiPr2)(SbMePh) were synthesised and characterised. Two of the phosphine-stibines and the two metal complexes were characterised by single-crystal X-ray diffraction. The peri-substituted species act as bidentate ligands through both P and Sb atoms, forming rather short Sb-metal bonds. The tertiary phosphine-stibines display through-space J(CP) couplings between the phosphorus atom and carbon atoms bonded directly to the Sb atom of up to 40 Hz. The sequestration of the P and Sb lone pairs results in much smaller corresponding J(CP) being observed in the metal complexes. QTAIM (Quantum Theory of Atoms in Molecules) and EDA-NOCV (Energy Decomposition Analysis employing Naturalised Orbitals for Chemical Valence) computational techniques were used to provide additional insight into a weak n(P)→σ*(Sb-C) intramolecular bonding interaction (pnictogen bond) in the phosphine-stibines.

Ligand Hydrogenation during Hydroformylation Catalysis Detected by In Situ High-Pressure Infra-Red Spectroscopic Analysis of a Rhodium/Phospholene-Phosphite Catalyst.

Phospholane-phosphites are known to show highly unusual selectivity towards branched aldehydes in the hydroformylation of terminal alkenes. This paper describes the synthesis of hitherto unknown unsaturated phospholene borane precursors and their conversion to the corresponding phospholene-phosphites. The relative stereochemistry of one of these ligands and its Pd complex was assigned with the aid of X-ray crystal structure determinations. These ligands were able to approach the level of selectivity observed for phospholane-phosphites in the rhodium-catalysed hydroformylation of propene. High-pressure infra-red (HPIR) spectroscopic monitoring of the catalyst formation revealed that whilst the catalysts showed good thermal stability with respect to fragmentation, the C=C bond in the phospholene moiety was slowly hydrogenated in the presence of rhodium and syngas. The ability of this spectroscopic tool to detect even subtle changes in structure, remotely from the carbonyl ligands, underlines the usefulness of HPIR spectroscopy in hydroformylation catalyst development.

Modular Synthesis of Complex Benzoxaboraheterocycles through Chelation-Assisted Rh-Catalyzed [2 + 2 + 2] Cycloaddition.

Benzoxaboraheterocycles (BOBs) are moieties of increasing interest in the pharmaceutical industry; however, the synthesis of these compounds is often difficult or impractical due to the sensitivity of the boron moiety, the requirement for metalation-borylation protocols, and lengthy syntheses. We report a straightforward, modular approach that enables access to complex examples of the BOB framework through a Rh-catalyzed [2 + 2 + 2] cycloaddition using MIDA-protected alkyne boronic acids. The key to the development of this methodology was overcoming the steric barrier to catalysis by leveraging chelation assistance. We show the utility of the method through synthesis of a broad range of BOB scaffolds, mechanistic information on the chelation effect, intramolecular alcohol-assisted BMIDA hydrolysis, and linear/cyclic BOB limits as well as comparative binding affinities of the product BOB frameworks for ribose-derived biomolecules.

Thermally activated delayed fluorescence emitters showing wide-range near-infrared piezochromism and their use in deep-red OLEDs.

Organic small molecules exhibiting both thermally activated delayed fluorescence (TADF) and wide-ranging piezochromism (Δλ > 150 nm) in the near-infrared region have rarely been reported in the literature. We present three emitters MeTPA-BQ, tBuTPA-BQ and TPPA-BQ based on a hybrid acceptor, benzo[g]quinoxaline-5,10-dione, that emit via TADF, having photoluminescence quantum yields, ΦPL, of 39-42% at photoluminescence (PL) maxima, λPL, of 625-670 nm in 2 wt% doped films in 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP). Despite their similar chemical structures, the PL properties in the crystalline states of MeTPA-BQ (λem = 735 nm, ΦPL = 2%) and tBuTPA-BQ (λem = 657 nm, ΦPL = 11%) are significantly different. Further, compounds tBuTPA-BQ and TPPA-BQ showed a significant PL shift of ∼98 and ∼165 nm upon grinding of the crystalline samples, respectively. Deep-red organic light-emitting diodes with MeTPA-BQ and tBuTPA-BQ were also fabricated, which showed maximum external quantum efficiencies, EQEmax, of 10.1% (λEL = 650 nm) and 8.5% (λEL = 670 nm), respectively.