A Multitechnique Study of C2H4 Adsorption on Fe3O4(001).

The adsorption/desorption of ethene (C2H4), also commonly known as ethylene, on Fe3O4(001) was studied under ultrahigh vacuum conditions using temperature-programmed desorption (TPD), scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory (DFT)-based computations. To interpret the TPD data, we have employed a new analysis method based on equilibrium thermodynamics. C2H4 adsorbs intact at all coverages and interacts most strongly with surface defects such as antiphase domain boundaries and Fe adatoms. On the regular surface, C2H4 binds atop surface Fe sites up to a coverage of 2 molecules per (√2 × âˆš2)R45° unit cell, with every second Fe occupied. A desorption energy of 0.36 eV is determined by analysis of the TPD spectra at this coverage, which is approximately 0.1-0.2 eV lower than the value calculated by DFT + U with van der Waals corrections. Additional molecules are accommodated in between the Fe rows. These are stabilized by attractive interactions with the molecules adsorbed at Fe sites. The total capacity of the surface for C2H4 adsorption is found to be close to 4 molecules per (√2 × âˆš2)R45° unit cell.

Oxygen-Terminated (1 × 1) Reconstruction of Reduced Magnetite Fe3O4(111).

The (111) facet of magnetite (Fe3O4) has been studied extensively by experimental and theoretical methods, but controversy remains regarding the structure of its low-energy surface terminations. Using density functional theory (DFT) computations, we demonstrate three reconstructions that are more favorable than the accepted Feoct2 termination under reducing conditions. All three structures change the coordination of iron in the kagome Feoct1 layer to be tetrahedral. With atomically resolved microscopy techniques, we show that the termination that coexists with the Fetet1 termination consists of tetrahedral iron capped by 3-fold coordinated oxygen atoms. This structure explains the inert nature of the reduced patches.

Suppressed Fluctuations as the Origin of the Static Magnetic Order in Strained Sr_{2}RuO_{4}.

Combining first-principles density-functional calculations and Moriya's self-consistent renormalization theory, we explain the recently reported counterintuitive appearance of an ordered magnetic state in uniaxially strained Sr_{2}RuO_{4} beyond the Lifshitz transition. We show that strain weakens the quantum spin fluctuations, which destroy the static order, more strongly than the tendency to magnetism. A different rate of decrease of the spin fluctuations vs magnetic stabilization energy promotes the onset of a static magnetic order beyond a critical strain.

Role of Polarons in Single-Atom Catalysts: Case Study of Me1 [Au1, Pt1, and Rh1] on TiO2(110).

The local environment of metal-oxide supported single-atom catalysts plays a decisive role in the surface reactivity and related catalytic properties. The study of such systems is complicated by the presence of point defects on the surface, which are often associated with the localization of excess charge in the form of polarons. This can affect the stability, the electronic configuration, and the local geometry of the adsorbed adatoms. In this work, through the use of density functional theory and surface-sensitive experiments, we study the adsorption of Rh1, Pt1, and Au1 metals on the reduced TiO2(110) surface, a prototypical polaronic material. A systematic analysis of the adsorption configurations and oxidation states of the adsorbed metals reveals different types of couplings between adsorbates and polarons. As confirmed by scanning tunneling microscopy measurements, the favored Pt1 and Au1 adsorption at oxygen vacancy sites is associated with a strong electronic charge transfer from polaronic states to adatom orbitals, which results in a reduction of the adsorbed metal. In contrast, the Rh1 adatoms interact weakly with the excess charge, which leaves the polarons largely unaffected. Our results show that an accurate understanding of the properties of single-atom catalysts on oxide surfaces requires a careful account of the interplay between adatoms, vacancy sites, and polarons. Supplementary Information: The online version contains supplementary material available at 10.1007/s11244-022-01651-0.

Deep Learning the Functional Renormalization Group.

We perform a data-driven dimensionality reduction of the scale-dependent four-point vertex function characterizing the functional renormalization group (FRG) flow for the widely studied two-dimensional t-t^{'} Hubbard model on the square lattice. We demonstrate that a deep learning architecture based on a neural ordinary differential equation solver in a low-dimensional latent space efficiently learns the FRG dynamics that delineates the various magnetic and d-wave superconducting regimes of the Hubbard model. We further present a dynamic mode decomposition analysis that confirms that a small number of modes are indeed sufficient to capture the FRG dynamics. Our Letter demonstrates the possibility of using artificial intelligence to extract compact representations of the four-point vertex functions for correlated electrons, a goal of utmost importance for the success of cutting-edge quantum field theoretical methods for tackling the many-electron problem.

Surface chemistry on a polarizable surface: Coupling of CO with KTaO3(001).

Polarizable materials attract attention in catalysis because they have a free parameter for tuning chemical reactivity. Their surfaces entangle the dielectric polarization with surface polarity, excess charge, and orbital hybridization. How this affects individual adsorbed molecules is shown for the incipient ferroelectric perovskite KTaO3. This intrinsically polar material cleaves along (001) into KO- and TaO2-terminated surface domains. At TaO2 terraces, the polarity-compensating excess electrons form a two-dimensional electron gas and can also localize by coupling to ferroelectric distortions. TaO2 terraces host two distinct types of CO molecules, adsorbed at equivalent lattice sites but charged differently as seen in atomic force microscopy/scanning tunneling microscopy. Temperature-programmed desorption shows substantially stronger binding of the charged CO; in density functional theory calculations, the excess charge favors a bipolaronic configuration coupled to the CO. These results pinpoint how adsorption states couple to ferroelectric polarization.

Competing electronic states emerging on polar surfaces.

Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO2 termination of KTaO3(001) forms more complex electronic states with different degrees of spatial and electronic localization: charge density waves (CDW) coexist with strongly-localized electron polarons and bipolarons. These surface electronic reconstructions, originating from the combined action of electron-lattice interaction and electronic correlation, are energetically more favorable than the 2DEG solution. They exhibit distinct spectroscopy signals and impact on the surface properties, as manifested by a local suppression of ferroelectric distortions.

CO oxidation by Pt2/Fe3O4: Metastable dimer and support configurations facilitate lattice oxygen extraction.

Heterogeneous catalysts based on subnanometer metal clusters often exhibit strongly size-dependent properties, and the addition or removal of a single atom can make all the difference. Identifying the most active species and deciphering the reaction mechanism is extremely difficult, however, because it is often not clear how the catalyst evolves in operando. Here, we use a combination of atomically resolved scanning probe microscopies, spectroscopic techniques, and density functional theory (DFT)-based calculations to study CO oxidation by a model Pt/Fe3O4(001) "single-atom" catalyst. We demonstrate that (PtCO)2 dimers, formed dynamically through the agglomeration of mobile Pt-carbonyl species, catalyze a reaction involving the oxide support to form CO2. Pt2 dimers produce one CO2 molecule before falling apart into two adatoms, releasing the second CO. Olattice extraction only becomes facile when both the Pt-dimer and the Fe3O4 support can access metastable configurations, suggesting that substantial, concerted rearrangements of both cluster and support must be considered for reactions occurring at elevated temperature.

Modeling polarons in density functional theory: lessons learned from TiO2.

Density functional theory (DFT) is nowadays one of the most broadly used and successful techniques to study the properties of polarons and their effects in materials. Here, we systematically analyze the aspects of the theoretical calculations that are crucial to obtain reliable predictions in agreement with the experimental observations. We focus on rutile TiO2, a prototypical polaronic compound, and compare the formation of polarons on the (110) surface and subsurface atomic layers. As expected, the parameterUused to correct the electronic correlation in the DFT +Uformalism affects the resulting charge localization, local structural distortions and electronic properties of polarons. Moreover, the polaron localization can be driven to different sites by strain: due to different local environments, surface and subsurface polarons show different responses to the applied strain, with impact on the relative energy stability. An accurate description of the properties of polarons is key to understand their impact on complex phenomena and applications: as an example, we show the effects of lattice strain on the interaction between polarons and CO adsorbates.

Ferro-octupolar Order and Low-Energy Excitations in d

Conflicting interpretations of experimental data preclude the understanding of the quantum magnetic state of spin-orbit coupled d^{2} double perovskites. Whether the ground state is a Janh-Teller-distorted order of quadrupoles or the hitherto elusive octupolar order remains debated. We resolve this uncertainty through direct calculations of all-rank intersite exchange interactions and inelastic neutron scattering cross section for the d^{2} double perovskite series Ba_{2}MOsO_{6} (M=Ca, Mg, Zn). Using advanced many-body first-principles methods, we show that the ground state is formed by ferro-ordered octupoles coupled by superexchange interactions within the ground-state E_{g} doublet. Computed ordering temperature of the single second-order phase transition is consistent with experimentally observed material-dependent trends. Minuscule distortions of the parent cubic structure are shown to qualitatively modify the structure of gaped magnetic excitations.

Rapid oxygen exchange between hematite and water vapor.

Oxygen exchange at oxide/liquid and oxide/gas interfaces is important in technology and environmental studies, as it is closely linked to both catalytic activity and material degradation. The atomic-scale details are mostly unknown, however, and are often ascribed to poorly defined defects in the crystal lattice. Here we show that even thermodynamically stable, well-ordered surfaces can be surprisingly reactive. Specifically, we show that all the 3-fold coordinated lattice oxygen atoms on a defect-free single-crystalline "r-cut" ([Formula: see text]) surface of hematite (α-Fe2O3) are exchanged with oxygen from surrounding water vapor within minutes at temperatures below 70 °C, while the atomic-scale surface structure is unperturbed by the process. A similar behavior is observed after liquid-water exposure, but the experimental data clearly show most of the exchange happens during desorption of the final monolayer, not during immersion. Density functional theory computations show that the exchange can happen during on-surface diffusion, where the cost of the lattice oxygen extraction is compensated by the stability of an HO-HOH-OH complex. Such insights into lattice oxygen stability are highly relevant for many research fields ranging from catalysis and hydrogen production to geochemistry and paleoclimatology.

Electronic State Unfolding for Plane Waves: Energy Bands, Fermi Surfaces, and Spectral Functions.

Present day computing facilities allow for first-principles density functional theory studies of complex physical and chemical phenomena. Often such calculations are linked to large supercells to adequately model the desired property. However, supercells are associated with small Brillouin zones in the reciprocal space, leading to folded electronic eigenstates that make the analysis and interpretation extremely challenging. Various techniques have been proposed and developed to reconstruct the electronic band structures of super cells unfolded into the reciprocal space of an ideal primitive cell. Here we propose an unfolding scheme embedded directly in the Vienna Ab initio Simulation Package (VASP) that requires modest computational resources and allows for an automatized mapping from the reciprocal space of the supercell to the primitive cell Brillouin zone. This algorithm can compute band structures, Fermi surfaces, and spectral functions by using an integrated postprocessing tool (bands4vasp). Here the method is applied to a selected variety of complex physical situations: the effect of doping on the band dispersion in the BaFe2(1-x)Ru2x As2 superconductor, the interaction between adsorbates and polaronic states on the TiO2(110) surface, and the band splitting induced by noncollinear spin fluctuations in EuCd2As2.

Unraveling CO adsorption on model single-atom catalysts.

Understanding how the local environment of a "single-atom" catalyst affects stability and reactivity remains a challenge. We present an in-depth study of copper1, silver1, gold1, nickel1, palladium1, platinum1, rhodium1, and iridium1 species on Fe3O4(001), a model support in which all metals occupy the same twofold-coordinated adsorption site upon deposition at room temperature. Surface science techniques revealed that CO adsorption strength at single metal sites differs from the respective metal surfaces and supported clusters. Charge transfer into the support modifies the d-states of the metal atom and the strength of the metal-CO bond. These effects could strengthen the bond (as for Ag1-CO) or weaken it (as for Ni1-CO), but CO-induced structural distortions reduce adsorption energies from those expected on the basis of electronic structure alone. The extent of the relaxations depends on the local geometry and could be predicted by analogy to coordination chemistry.

Osmates on the Verge of a Hund's-Mott Transition: The Different Fates of NaOsO_{3} and LiOsO_{3}.

We clarify the origin of the strikingly different spectroscopic properties of the chemically similar compounds NaOsO_{3} and LiOsO_{3}. Our first-principle, many-body analysis demonstrates that the highly sensitive physics of these two materials is controlled by their proximity to an adjacent Hund's-Mott insulating phase. Although 5d oxides are mildly correlated, we show that the cooperative action of intraorbital repulsion and Hund's exchange becomes the dominant physical mechanism in these materials if their t_{2g} shell is half filled. Small material specific details hence result in an extremely sharp change of the electronic mobility, explaining the surprisingly different properties of the paramagnetic high-temperature phases of the two compounds.

Resolving the adsorption of molecular O2 on the rutile TiO2(110) surface by noncontact atomic force microscopy.

Interaction of molecular oxygen with semiconducting oxide surfaces plays a key role in many technologies. The topic is difficult to approach both by experiment and in theory, mainly due to multiple stable charge states, adsorption configurations, and reaction channels of adsorbed oxygen species. Here we use a combination of noncontact atomic force microscopy (AFM) and density functional theory (DFT) to resolve [Formula: see text] adsorption on the rutile [Formula: see text](110) surface, which presents a longstanding challenge in the surface chemistry of metal oxides. We show that chemically inert AFM tips terminated by an oxygen adatom provide excellent resolution of both the adsorbed species and the oxygen sublattice of the substrate. Adsorbed [Formula: see text] molecules can accept either one or two electron polarons from the surface, forming superoxo or peroxo species. The peroxo state is energetically preferred under any conditions relevant for applications. The possibility of nonintrusive imaging allows us to explain behavior related to electron/hole injection from the tip, interaction with UV light, and the effect of thermal annealing.

Assessing model-dielectric-dependent hybrid functionals on the antiferromagnetic transition-metal monoxides MnO, FeO, CoO, and NiO.

Recently, two nonempirical hybrid functionals, dielectric-dependent range-separated hybrid functional based on the Coulomb-attenuating method (DD-RSH-CAM) and doubly screened hybrid functional (DSH), have been suggested by Chen et al (2018 Phys. Rev. Mater. 2 073803) and Cui et al (2018 J. Phys. Chem. Lett. 9 2338), respectively. These two hybrid functionals are both based on a common model dielectric function approach, but differ in the way how to non-empirically obtain the range-separation parameter. By retaining the full short-range Fock exchange and a fraction of the long-range Fock exchange that equals the inverse of the dielectric constant, both DD-RSH-CAM and DSH turn out to perform very well in predicting the band gaps for a large variety of semiconductors and insulators. Here, we assess how these two hybrid functionals perform on challenging antiferromagnetic transition-metal monoxides MnO, FeO, CoO, and NiO by comparing them to other conventional hybrid functionals and the GW method. We find that single-shot DD0-RSH-CAM and DSH0 improve the band gaps towards experiments as compared to conventional hybrid functionals. The magnetic moments are slightly increased, but the predicted dielectric constants are decreased. The valence band density of states (DOS) predicted by DD0-RSH-CAM and DSH0 are as satisfactory as HSE03 in comparison to experimental spectra, however, the conduction band DOS are shifted to higher energies by about 2 eV compared to HSE03. Self-consistent DD-RSH-CAM and DSH deteriorate the results with a significant overestimation of band gaps.

Doping Evolution of the Local Electronic and Structural Properties of the Double Perovskite Ba2Na1-x Ca x OsO6.

We present a combined experimental and computational study of the effect of charge doping in the osmium based double perovskite Ba2Na1-x Ca x OsO6 for 0 ≤ x ≤ 1 in order to provide a structural and electronic basis for understanding this complex Dirac-Mott insulator material. Specifically, we investigate the effects of the substitution of monovalent Na with divalent Ca, a form of charge doping or alloying that nominally tunes the system from Os7+ with a 5d1 configuration to Os6+ with 5d2 configuration. After an X-ray diffraction characterization, the local atomic and electronic structure has been experimentally probed by X-ray absorption fine structure at all the cation absorption edges at room temperature; the simulations have been performed using ab initio density functional methods. We find that the substitution of Na by Ca induces a linear volume expansion of the crystal structure which indicates an effective alloying due to the substitution process in the whole doping range. The local structure corresponds to the expected double perovskite one with rock-salt arrangement of Na/Ca in the B site and Os in the B' one for all the compositions. X-ray absorption near edge structure measurements show a smooth decrease of the oxidation state of Os from 7+ (5d1) to 6+ (5d2) with increasing Ca concentration, while the oxidation states of Ba, Na, and Ca are constant. This indicates that the substitution of Na by Ca gives rise to an effective electron transfer from the B to the B' site. The comparison between X-ray absorption measurements and ab initio simulations reveals that the expansion of the Os-O bond length induces a reduction of the crystal field splitting of unoccupied Os derived d states.

Viewpoint: Atomic-Scale Design Protocols toward Energy, Electronic, Catalysis, and Sensing Applications.

Nanostructured materials are essential building blocks for the fabrication of new devices for energy harvesting/storage, sensing, catalysis, magnetic, and optoelectronic applications. However, because of the increase of technological needs, it is essential to identify new functional materials and improve the properties of existing ones. The objective of this Viewpoint is to examine the state of the art of atomic-scale simulative and experimental protocols aimed to the design of novel functional nanostructured materials, and to present new perspectives in the relative fields. This is the result of the debates of Symposium I "Atomic-scale design protocols towards energy, electronic, catalysis, and sensing applications", which took place within the 2018 European Materials Research Society fall meeting.

Local Structure and Coordination Define Adsorption in a Model Ir1 /Fe3 O4 Single-Atom Catalyst.

Single-atom catalysts (SACs) bridge homo- and heterogeneous catalysis because the active site is a metal atom coordinated to surface ligands. The local binding environment of the atom should thus strongly influence how reactants adsorb. Now, atomically resolved scanning-probe microscopy, X-ray photoelectron spectroscopy, temperature-programmed desorption, and DFT are used to study how CO binds at different Ir1 sites on a precisely defined Fe3 O4 (001) support. The two- and five-fold-coordinated Ir adatoms bind CO more strongly than metallic Ir, and adopt structures consistent with square-planar IrI and octahedral IrIII complexes, respectively. Ir incorporates into the subsurface already at 450 K, becoming inactive for adsorption. Above 900 K, the Ir adatoms agglomerate to form nanoparticles encapsulated by iron oxide. These results demonstrate the link between SAC systems and coordination complexes, and that incorporation into the support is an important deactivation mechanism.