Your browser doesn't support javascript.
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Mais filtros

Base de dados
Intervalo de ano de publicação
Sci Adv ; 6(47)2020 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-33208366


We demonstrate an additive manufacturing approach to produce gradient refractive index glass optics. Using direct ink writing with an active inline micromixer, we three-dimensionally print multimaterial green bodies with compositional gradients, consisting primarily of silica nanoparticles and varying concentrations of titania as the index-modifying dopant. The green bodies are then consolidated into glass and polished, resulting in optics with tailored spatial profiles of the refractive index. We show that this approach can be used to achieve a variety of conventional and unconventional optical functions in a flat glass component with no surface curvature.

ACS Appl Mater Interfaces ; 12(5): 6736-6741, 2020 Feb 05.
Artigo em Inglês | MEDLINE | ID: mdl-31934741


Direct ink writing (DIW) three-dimensional (3D) printing provides a revolutionary approach to fabricating components with gradients in material properties. Herein, we report a method for generating colloidal germania feedstock and germania-silica inks for the production of optical quality germania-silica (GeO2-SiO2) glasses by DIW, making available a new material composition for the development of multimaterial and functionally graded optical quality glasses and ceramics by additive manufacturing. Colloidal germania and silica particles are prepared by a base-catalyzed sol-gel method and converted to printable shear-thinning suspensions with desired viscoelastic properties for DIW. The volatile solvents are then evaporated, and the green bodies are calcined and sintered to produce transparent, crack-free glasses. Chemical and structural evolution of GeO2-SiO2 glasses is confirmed by nuclear magnetic resonance, X-ray diffraction, and Raman spectroscopy. UV-vis transmission and optical homogeneity measurements reveal comparable performance of the 3D printed GeO2-SiO2 glasses to glasses produced using conventional approaches and improved performance over 3D printed TiO2-SiO2 inks. Moreover, because GeO2-SiO2 inks are compatible with DIW technology, they offer exciting options for forming new materials with patterned compositions such as gradients in the refractive index that cannot be achieved with conventional manufacturing approaches.

Opt Express ; 21(7): 8821-30, 2013 Apr 08.
Artigo em Inglês | MEDLINE | ID: mdl-23571972


We demonstrate a fiber-based slow light system using a carbon disulfide (CS2)) filled integrated liquid-core optical fiber (i-LCOF). Using 1 meter of i-LCOF we were able to delay 18ps pulses up to 34ps; a delay of 188% of the pulse width. This experimental setup serves as a foundation for slow-light experiments in other nonlinear liquids. Numerical simulations of pulse-propagation equations confirmed the observed delay and a simplified method is presented that can be applied to calculate induced delay for non-cw Stokes pulses. The system is all-fiber and compact with delays greater than a pulse width, indicating potential application as an ultrafast controllable delay line for time division multiplexing in multiGb/s telecommunication systems.

Dissulfeto de Carbono/química , Tecnologia de Fibra Óptica/instrumentação , Análise Espectral Raman/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Espalhamento de Radiação , Integração de Sistemas