Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 141
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
J Am Chem Soc ; 143(42): 17833-17842, 2021 Oct 27.
Artigo em Inglês | MEDLINE | ID: mdl-34641681

RESUMO

Although a large number of novel supramolecular topologies featuring half-sandwich [Cp*Rh] units have been reported, investigations into the properties of these architectures are astoundingly rare. In addition, the bidentate ligands employed to prepare these species have remained relatively homogeneous (i.e., symmetrical bis(pyri-4-dyl) ligands). To address these paucities in the field, the novel unsymmetrical ligand L2 and the rarely reported pyri-3-dyl ligand L3, all bearing aromatic phenazine groups (an N-heterocyclic analog of anthracene), were synthesized in addition to the common symmetrical pyri-4-dyl L1. [3]Catenane, [2]catenane, and Borromean rings assemblies were constructed successfully by the self-assembly of L1 with different building blocks. Afterward, ligand L2 was applied to prepare two novel molecular-tweezer-like compounds. Lastly, a twisted [2]catenane (relative to the [2]catenane constructed using L1) and a sandwiched metallarectangle were obtained using L3. π-π stacking interactions were observed to play a significant role in stabilizing these topologies, which also promoted nonradiative migration and triggered photothermal conversion in both the solution and the solid state. In the solution state, a clear rule of thumb was derived whereby the NIR photothermal conversion efficiency increased as the π-π stacking increased, and a very high photothermal conversion efficiency (35.5-62.4%) was observed. In addition, this family of half-sandwich-based assemblies also exhibited good photothermal conversion properties in the crystalline and noncrystal powder states. This research provides a novel method to synthesize excellent NIR photothermal conversion materials featuring half-sandwich [Cp*Rh] units and points to potential applications in the near future.

2.
Dalton Trans ; 50(46): 16984-16989, 2021 Nov 30.
Artigo em Inglês | MEDLINE | ID: mdl-34612256

RESUMO

Two novel compounds, a molecular trefoil knot and a Solomon link, were constructed successfully through the cooperation of multiple π-π stacking interactions. A reversible transformation between the trefoil knot and the corresponding [2 + 2] macrocycle could be achieved by solvent- and guest-induced effects. However, the Solomon link maintains its stability in different concentrations, solvents and guest molecules. Single-crystal X-ray crystallographic data, NMR spectroscopic experiments and ESI-MS support the synthesis and structural assignments. These synthesis methods open the door to the further development of smart materials, which will push the advancement of rational design of biomaterials.

3.
Chem Commun (Camb) ; 57(76): 9772-9775, 2021 Sep 23.
Artigo em Inglês | MEDLINE | ID: mdl-34486610

RESUMO

Taking advantage of the accumulation of a number of noncovalent intramolecular interactions, octanuclear and hexanuclear trefoil knots are self-assembled based on half-sandwich rhodium fragments. The selective synthesis of either the octanuclear or hexanuclear knot can be controlled by altering different dipyridyl arms.

4.
J Am Chem Soc ; 143(31): 12404-12411, 2021 08 11.
Artigo em Inglês | MEDLINE | ID: mdl-34337934

RESUMO

One fascinating and challenging synthetic target in the field of mechanically interlocked molecules is the family of linear [4]catenanes, which are topologically identical to the logo of automobile maker Audi. Herein, we report an "all-in-one" synthetic strategy for the synthesis of linear metalla[n]catenanes (n = 2-4) by the coordination-driven self-assembly of Cp*Rh-based (Cp* = η5-pentamethylcyclopentadienyl) organometallic rectangle π-donors and tetracationic organic cyclophane π-acceptors. We selected the pyrenyl group as the π-donor unit, leading to homogeneous metalla[2]catenanes and cyclic metalla[3]catenanes via π-stacking interactions. By taking advantage of the strong electrostatic interactions between π-donor units and π-acceptor units, a heterogeneous metalla[2]catenanes and linear metalla[3]catenanes, respectively, could be obtained by the simple stirring of homogeneous metalla[2]catenanes with a suitable tetracationic cyclophane. On this basis, this "all-in-one" synthetic strategy was further used to realize a quantitative one-step synthesis of a linear metalla[4]catenanes via the self-assembly of cyclic metalla[3]catenanes and tetracationic cyclophanes. All heterogeneous metalla[n]catenanes (n = 2-4) were fully characterized by single-crystal X-ray analysis, NMR spectroscopy and electrospray ionization mass spectrometry.

5.
Chem Asian J ; 16(14): 1918-1924, 2021 Jul 19.
Artigo em Inglês | MEDLINE | ID: mdl-33960138

RESUMO

Two Cp*-RhIII based trefoil knots were obtained in high yield under ambient conditions via the coordination-driven self-assembly of semi-rigid thioether dipyridyl ligand 1,4-bis[(pyridin-4-ylthio)methyl]benzene (L1 ), ligand chloranilic acid (H2 -CA) and 6,11-dihydroxytetracene-5,12-dione (H2 -TtDo) with Cp*RhIII metal corner units, respectively. Furthermore, using the bulkier 4,4'-{[(2,5-dimethyl-1,4-phenylene)bis(methylene)]bis(sulfanediyl)}dipyridine (L2 ) in the place of ligand L1 in the construction process resulted in the formation of a teranuclear metallacycle and a template-free Borromean ring in high yields thanks to significantly altered intermolecular forces between the constituent ligands induced by the sterically-hindering methyl groups of L2 , as demonstrated via a detailed X-ray crystallographic analysis and NMR spectroscopy.

6.
Angew Chem Int Ed Engl ; 60(28): 15466-15471, 2021 Jul 05.
Artigo em Inglês | MEDLINE | ID: mdl-33871131

RESUMO

A Cp*-Rh based D-shaped binuclear metallacycle and a template-free molecular Borromean ring (BR) were obtained in high yield using the semi-rigid thioether dipyridyl ligand 1,4-bis[(pyridin-4-ylthio)methyl]benzene (Bptmb). The topological transformation from a binuclear metallacycle and a BR to tetranuclear metallacycles was realized via the controlled oxidation of thioethers. The strategy used in this work can be regarded as a new form of stimuli-responsive post-synthesis modification (PSM).

7.
Chemistry ; 27(37): 9524-9528, 2021 Jul 02.
Artigo em Inglês | MEDLINE | ID: mdl-33882176

RESUMO

The coordination-driven self-assembly of organometallic half-sandwich iridium(III)- and rhodium(III)-based building blocks with asymmetric ambidentate pyridyl-carboxylate ligands is described. Despite the potential for obtaining a statistical mixture of multiple products, D2 symmetric octanuclear cages were formed selectively by taking advantage of the electronic effects emanating from the two types of chelating sites - (O,O') and (N,N') - on the tetranuclear building blocks. The metal sources and the lengths of bridging ligands influence the selectivity of the self-assembly. Experimental observations, supported by computational studies, suggest that the D2 symmetric cages are the thermodynamically favored products. Overall, the results underline the importance of electronic effects on the selectivity of coordination-driven self-assembly, and demonstrate that asymmetric ambidentate ligands can be used to control the design of discrete supramolecular coordination complexes.


Assuntos
Irídio , Ródio , Ácidos Carboxílicos , Ligantes
8.
J Am Chem Soc ; 143(13): 5099-5105, 2021 04 07.
Artigo em Inglês | MEDLINE | ID: mdl-33761746

RESUMO

The controllable B-H bond activation of carboranes has long been a compelling challenge. However, as the symmetry of para-carborane places the same charge on all of its ten boron atoms, controlling the regiochemistry of B-H bond activation in these molecules has remained out of reach ever since their discovery. Herein, we describe how to use steric effects to achieve a regioselective process for B-H activation of para-carborane. In this strategy, B(2,8)-H or B(2,7)-H activation patterns were achieved by taking advantage of the π-π interactions between pyridine ligands. Interestingly, by employing host-guest interactions in metallacage compounds, B(2,8)-H bond activation could be avoided and exclusive B(2,9)-H bond activation can be achieved. Steric hindrance was also found to be beneficial for regioselective B(2,8)-H bond activation in metallacage species. In this work, we demonstrate that steric effects can be a promising driving force for controllable activation of the B-H bonds of carboranes and open new opportunities in this field.

9.
Chem Commun (Camb) ; 57(19): 2412-2415, 2021 Mar 07.
Artigo em Inglês | MEDLINE | ID: mdl-33554232

RESUMO

The introduction of the 2-pyridylsulfenyl directing group to o-carboranes allowed either B(3)-Ir or B(4)-Ir bond formation using a steric effect strategy. Moreover, the reactivity of the B(4)-Rh o-carborane complexes with small molecules was probed by reactions with N-bromosuccinimide, N-iodosuccinimide and O2. Rhodium-mediated B(4)-hydroxylation and B(4)-halogenation which are seldom reported have been achieved under practical and mild conditions.

10.
Dalton Trans ; 50(3): 1060-1068, 2021 Jan 21.
Artigo em Inglês | MEDLINE | ID: mdl-33367445

RESUMO

Herein, we describe the synthesis of tetraphenylphosphonium o-carboranyl dithiocarboxylate (Ligand 1) and methyldithiocarboxyl-o-carborane (Ligand 2). The complexes [Cp*M(o-C2B10H11CS2)Cl] (M = Ir (3); Rh (4)) and [Cp*M(o-C2B10H11CS2)2] (M = Ir (5); Rh (6)) have been synthesized based on Ligand 1. The selective B-H bond activation of Ligand 2 has also been explored, leading to the synthesis of the B-H activated complex [Cp*Ir(o-C2B10H10CS2CH3)Cl] (7) and four of its substituted derivatives (8, 9, 10 and 11). All of these compounds have been characterised through single-crystal X-ray diffraction, NMR, IR spectroscopy and elemental analysis.

11.
J Am Chem Soc ; 143(2): 1119-1125, 2021 01 20.
Artigo em Inglês | MEDLINE | ID: mdl-33382617

RESUMO

Two molecular metalla-knots containing over 500 non-hydrogen atoms (especially 16 RhIII ions) and one molecular Borromean ring were obtained in high yields facilitated by multiple intermolecular interactions between their components. The syntheses rely on the strategic selection of the nonlinear dipyridyl ligand 2,7-di(pyridin-4-yl)-9H-fluorene (L1) as precursor, and the structures of the assemblies were confirmed by detailed X-ray crystallographic analysis. Subsequently, replacing L1 with the bulkier ligand 4,4'-(9,9-dimethyl-9H-fluorene-2,7-diyl)dipyridine (L2) led to the formation of three tetranuclear metallocycles in high yields on account of the weakened π-π stacking interactions between the naphthacene/anthracene and fluorene moieties, which in turn confirmed the significance of stacking interactions in the construction of the molecular 818 metalla-knots and the molecular Borromean ring.

12.
J Am Chem Soc ; 142(44): 18946-18954, 2020 Nov 04.
Artigo em Inglês | MEDLINE | ID: mdl-33006897

RESUMO

Molecular figure-eight knot (notation: 41) is extremely rare and presents great synthetic challenge due to its essentially complicated entanglement. To solve this synthetic problem, a quadruple stacking strategy was developed. Herein, we report the efficient self-assembly of figure-eight knots induced by quadruple stacking interactions, through the combination of four carefully selected naphthalenediimide (NDI)-based pyridyl ligands and Cp*Rh building blocks bearing large conjugated planes in a single-step strategy. Notably, slight size adjustment of the Cp*Rh units was found to affect the stability of the figure-eight knots in methanol. Additionally, reversible structural transformations between these figure-eight knots and corresponding metallorectangles could be achieved by concentration changes and solvent- and guest-induced effects. X-ray crystallographic data and NMR spectroscopy provide full confirmation of these phenomena.

13.
J Am Chem Soc ; 142(32): 13667-13671, 2020 08 12.
Artigo em Inglês | MEDLINE | ID: mdl-32786810

RESUMO

With the help of retrosynthetic analysis, we have realized the highly anticipated stereoselective synthesis of a topologically chiral Solomon link, by taking advantage of coordination-driven self-assembly and chiral induction by axially chiral ligands. Combination of the ligands (R or S)-2,2'-diethoxy-1,1'-binaphthyl-6,6'-bis(4-vinylpyridine) (R-L or S-L) with the binuclear iridium complex [Cp*2Ir2(DHBQ)(OTf)2] (Ir-B(OTf)2, H2DHBQ = 2,5-dihydroxy-1,4-benzoquinone) allows diastereoselective synthesis of the topological enantiomers P (Ir-1P) or M (Ir-1M) of a Solomon link, respectively. The main driving force for the formation of the Solomon link is the π-π interactions between chiral ligands.

14.
Chem Rev ; 120(13): 6288-6325, 2020 07 08.
Artigo em Inglês | MEDLINE | ID: mdl-32558562

RESUMO

Since the emergence of the concept of chemical topology, interlocked molecular assemblies have graduated from academic curiosities and poorly defined species to become synthetic realities. Coordination-directed synthesis provides powerful, diverse, and increasingly sophisticated protocols for accessing interlocked molecules. Originally, metal ions were employed solely as templates to gather and position building blocks in entwined or threaded arrangements. Recently, metal centers have increasingly featured within the backbones of the integral structural elements, which in turn use noncovalent interactions to self-assemble into intricate topologies. By outlining ingenious recent examples as well as seminal classic cases, this Review focuses on the role of metal-ligand paradigms in assembling molecular links. In addition, the ever-evolving approaches to efficient assembly, the structural features of the resulting architectures, and their prospects for the future are also presented.

15.
J Am Chem Soc ; 142(18): 8532-8538, 2020 May 06.
Artigo em Inglês | MEDLINE | ID: mdl-32271556

RESUMO

Herein, we describe how to utilize dihydrogen bond interactions to achieve alkane recognition and hexane isomer separation. A series of metallacycles based on carborane backbones are presented herein, revealing interdependent B-Hδ-···Hδ+-C proton-hydride interactions. The metallacycles take advantage of these dihydrogen bond interactions for the separation of hexane isomers. We show that the metallacycle 3a, bearing 1,4-di(4-pyridyl)benzene (DPB), can produce n-hexane with a purity of >99% in a single adsorption-desorption cycle from an equimolar mixture of all five isomers of hexane. The isomers 2-methylpentane and 3-methylpentane can be selectively absorbed by metallacycle 4a, which bears 1,2-di(4-pyridyl)ethylene (DPE). The size of the metallacycle, C-H···π interactions, and particularly B-Hδ-···Hδ+-C interactions are the main forces governing the extent of hexane recognition. This work provides a promising principle for the design of supramolecular coordination complexes (SCCs) for the separation of alkanes.

16.
Chemistry ; 26(22): 5093-5099, 2020 Apr 16.
Artigo em Inglês | MEDLINE | ID: mdl-32065679

RESUMO

Understanding and controlling the topology of self-assembled structures plays a fundamental role in supramolecular chemistry. Herein, the preparation of a series of tetranuclear metallarectangles and hexanuclear trefoil knots featuring Cp*Rh building blocks by template-free self-assembly with four different rigid and flexible ligands is described. Transformations between the trefoil knots and the corresponding macrocycles can be induced by using concentration effects. Remarkably, the hexanuclear trefoil knot 5 was shown to assemble further to provide rare examples of [12+1] heteronuclear double trefoil knots (5 a/5 b/5 c/5 d) through coordination of the amide oxygen atoms to the secondary metal ions Na+ /K+ /Ca2+ /Cd2+ . The synthetic results are supported by single-crystal XRD.

17.
Chemistry ; 26(2): 558-563, 2020 Jan 07.
Artigo em Inglês | MEDLINE | ID: mdl-31692129

RESUMO

By taking advantage of self-complementary π-π stacking and CH-π interactions, a series of discrete quadruple stacks were constructed through the self-aggregation of U-shaped dirhodium metallotweezer complexes featuring various planar polyaromatic ligands. By altering the conjugate stacking strength and bridging ligands, assemblies with a range of topologies were obtained, including a binuclear D-shaped macrocycle, tetranuclear open-ended cagelike frameworks, and duplex metallotweezer stacking structures. Furthermore, a rare stacking interaction resulting in selective C-H activation was observed during the self-assembly process of these elaborate architectures.

18.
Chem Sci ; 11(30): 8013-8019, 2020 Jul 15.
Artigo em Inglês | MEDLINE | ID: mdl-34094170

RESUMO

The synthesis of complicated supramolecular architectures and the study of their reversible structural transformations remains a fascinating challenge in the field of supramolecular chemistry. Herein, two types of novel coordination compounds, a non-intertwined ring-in-ring assembly and an abnormal trefoil knot were constructed from a strategically selected Cp*Rh building block and a semi-rigid N,N'-bis(4-pyridylmethyl)diphthalic diimide ligand via coordination-driven self-assembly. Remarkably, the reversible transformation between the abnormal trefoil knot and the ring-in-ring assembly or the corresponding tetranuclear macrocycle could be achieved by the synergistic effects of Ag+ ion coordination and alteration of the solvent. Single-crystal X-ray crystallographic data and NMR spectroscopic experiments support the structural assignments.

19.
Chem Sci ; 11(42): 11509-11513, 2020 Sep 21.
Artigo em Inglês | MEDLINE | ID: mdl-34094395

RESUMO

Herein, we report a hierarchical assembly strategy for constructing heterogeneous half-sandwich organometallic D-A (D = π-donor, A = π-acceptor) interlocked structures, and their application in near-infrared (NIR) photothermal conversion. Thienothiophene and diketopyrrolopyrrole groups were selected as the D and A units, leading to two homogeneous metalla[2]catenanes with D-D-D-D and A-A-A-A stacks, respectively. By the ordered secondary assembly of homogeneous metalla[2]catenanes, two unprecedented heterogeneous D-A metalla[2]catenanes comprising an unusual mixed D-A-D-D and unconventional D-A-A-A stacks were realized by the combination of multiple noncovalent interactions, as all demonstrated by a detailed X-ray crystallographic study. Benefiting from the mixed D-A stacking modes, NIR absorption of heterogeneous D-A metalla[2]catenanes is significantly enhanced in contrast to homogeneous metalla[2]catenanes. Thanks to the enhanced NIR absorption and the fluorescence quenching effect from half-sandwich organometallic fragments, heterogeneous D-A metalla[2]catenanes displayed high-performance NIR photothermal conversion properties (η = 27.3%).

20.
Natl Sci Rev ; 7(10): 1548-1556, 2020 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-34691487

RESUMO

Despite extensive research and several stunning breakthroughs in the synthesis of interlocked molecular species, [3]catenanes, Borromean rings and ring-in-ring complexes are exceedingly rare and their targeted synthesis remains a formidable challenge. Herein, a series of Cp*Rh-based homogeneous and heterogeneous interlocked structures have been prepared by coordination-driven self-assembly, not only including metalla[2]catenanes and molecular Borromean rings, but also linear metalla[3]catenanes and ring-in-ring complexes. The interlocked structures are all based on bithiophenyl groups. The bithiophenyl groups effectively enhance the strength of the inter-ring interactions and play a crucial role in the formation of these interlocked structures. By taking advantage of the strong interaction between π-donor (D) and π-acceptor (A) groups, the electron-deficient methylviologen cation was introduced into a cationic metallarectangle based on bithiophenyl groups. Taking inspiration from these results, a cationic metallarectangle based on A units was threaded into a metallarectangle based on D units, leading to a heterogeneous D-A ring-in-ring structure.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...