Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 19 de 19
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
ACS Appl Mater Interfaces ; 16(39): 52179-52190, 2024 Oct 02.
Artigo em Inglês | MEDLINE | ID: mdl-39293816

RESUMO

The enhanced utilization of noble metal catalysts through highly porous nanostructures is crucial to advancing the commercialization prospects of proton exchange membrane water electrolysis (PEMWE). In this study, hierarchically structured IrOx-based nanofiber catalyst materials for acidic water electrolysis are synthesized by electrospinning, a process known for its scalability and ease of operation. A calcination study at various temperatures from 400 to 800 °C is employed to find the best candidates for both electrocatalytic activity and stability. Morphology, structure, phase, and chemical composition are investigated using a scale-bridging approach by SEM, TEM, XRD, and XPS to shed light on the structure-function relationship of the thermally prepared nanofibers. Activity and stability are monitored by a scanning flow cell (SFC) coupled with an inductively coupled plasma mass spectrometer (ICP-MS). We evaluate the dissolution of all metals potentially incorporated into the final catalyst material throughout the synthesis pathway. Despite the opposite trend of performance and stability, the present study demonstrates that an optimum between these two aspects can be achieved at 600 °C, exhibiting values that are 1.4 and 2.4 times higher than those of the commercial reference material, respectively. The dissolution of metal contaminations such as Ni, Fe, and Cr remains minimal, exhibiting no correlation with the steps of the electrochemical protocol applied, thus exerting a negligible influence on the stability of the nanofibrous catalyst materials. This work demonstrates the scalability of electrospinning to produce nanofibers with enhanced catalyst utilization and their testing by SFC-ICP-MS. Moreover, it illustrates the influence of calcination temperature on the structure and chemical composition of the nanofibers, resulting in outstanding electrocatalytic performance and stability compared to commercial catalyst materials for PEMWE.

2.
J Am Chem Soc ; 145(30): 16517-16525, 2023 Aug 02.
Artigo em Inglês | MEDLINE | ID: mdl-37467341

RESUMO

High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of the molecular structure leads to the complexity of molecular properties, such as solubility, polarity, and crystallinity, which poses great challenges to solution processing and purification. Here, we first report an integrated system for the high-throughput synthesis, purification, and characterization of molecules with a large variety. Based on the principle "Like dissolves like," we combine theoretical calculations and a robotic platform to accelerate the purification of those molecules. With this platform, a material library containing 125 molecules and their optical-electronic properties was built within a timeframe of weeks. More importantly, the high repeatability of recrystallization we design is a reliable approach to further upgrading and industrial production.

3.
J Am Chem Soc ; 145(11): 6398-6409, 2023 Mar 22.
Artigo em Inglês | MEDLINE | ID: mdl-36892000

RESUMO

The oxygen evolution reaction (OER) is crucial to future energy systems based on water electrolysis. Iridium oxides are promising catalysts due to their resistance to corrosion under acidic and oxidizing conditions. Highly active iridium (oxy)hydroxides prepared using alkali metal bases transform into low activity rutile IrO2 at elevated temperatures (>350 °C) during catalyst/electrode preparation. Depending on the residual amount of alkali metals, we now show that this transformation can result in either rutile IrO2 or nano-crystalline Li-intercalated IrOx. While the transition to rutile results in poor activity, the Li-intercalated IrOx has comparative activity and improved stability when compared to the highly active amorphous material despite being treated at 500 °C. This highly active nanocrystalline form of lithium iridate could be more resistant to industrial procedures to produce PEM membranes and provide a route to stabilize the high populations of redox active sites of amorphous iridium (oxy)hydroxides.

4.
Adv Mater ; 34(28): e2203030, 2022 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-35514107

RESUMO

Fuel cells recombine water from H2 and O2 thereby can power, for example, cars or houses with no direct carbon emission. In anion-exchange membrane fuel cells (AEMFCs), to reach high power densities, operating at high pH is an alternative to using large volumes of noble metals catalysts at the cathode, where the oxygen-reduction reaction occurs. However, the sluggish kinetics of the hydrogen-oxidation reaction (HOR) hinders upscaling despite promising catalysts. Here, the authors observe an unexpected ingress of B into Pd nanocatalysts synthesized by wet-chemistry, gaining control over this B-doping, and report on its influence on the HOR activity in alkaline conditions. They rationalize their findings using ab initio calculations of both H- and OH-adsorption on B-doped Pd. Using this "impurity engineering" approach, they thus design Pt-free catalysts as required in electrochemical energy conversion devices, for example, next generations of AEMFCs, that satisfy the economic and environmental constraints, that is, reasonable operating costs and long-term stability, to enable the "hydrogen economy."

5.
ACS Appl Energy Mater ; 3(10): 9523-9527, 2020 Oct 26.
Artigo em Inglês | MEDLINE | ID: mdl-33134878

RESUMO

Photoelectrochemical water splitting is a promising route to produce hydrogen from solar energy. However, corrosion of photoelectrodes remains a fundamental challenge for their implementation. Here, we reveal different dissolution behaviors of BiVO4 photoanode in pH-buffered borate, phosphate, and citrate (hole-scavenger) electrolytes, studied in operando employing an illuminated scanning flow cell. We demonstrate that decrease in photocurrents alone does not reflect the degradation of photoelectrodes. Changes in dissolution rates correlate to the evolution of surface chemistry and morphology. The correlative measurements on both sides of the liquid-semiconductor junction provide quantitative comparison and mechanistic insights into the degradation processes.

6.
J Phys Chem Lett ; 11(13): 5008-5014, 2020 Jul 02.
Artigo em Inglês | MEDLINE | ID: mdl-32496784

RESUMO

The development of efficient acidic water electrolyzers relies on understanding dynamic changes of the Ir-based catalytic surfaces during the oxygen evolution reaction (OER). Such changes include degradation, oxidation, and amorphization processes, each of which somehow affects the material's catalytic performance and durability. Some mechanisms involve the release of oxygen atoms from the oxide's lattice, the extent of which is determined by the structure of the catalyst. While the stability of hydrous Ir oxides suffers from the active participation of lattice oxygen atoms in the OER, rutile IrO2 is more stable and the lattice oxygen involvement is still under debate due to the insufficient sensitivity of commonly used online electrochemical mass spectrometry. Here, we revisit the case of rutile IrO2 at the atomic scale by a combination of isotope labeling and atom probe tomography and reveal the exchange of oxygen atoms between the oxide lattice and water. Our approach enables direct visualization of the electrochemically active volume of the catalysts and allows for the estimation of an oxygen exchange rate during the OER that is discussed in view of surface restructuring and subsequent degradation. Our work presents an unprecedented opportunity to quantitatively assess the exchange of surface species during an electrochemical reaction, relevant for the optimization of the long-term stability of catalytic systems.

7.
ACS Appl Mater Interfaces ; 12(20): 23595-23605, 2020 May 20.
Artigo em Inglês | MEDLINE | ID: mdl-32314585

RESUMO

Metal alloy catalysts can develop complex surface structures when exposed to reactive atmospheres. The structures of the resulting surfaces have intricate relationships with a myriad of factors, such as the affinity of the individual alloying elements to the components of the gas atmosphere and the bond strengths of the multitude of low-energy surface compounds that can be formed. Identifying the atomic structure of such surfaces is a prerequisite for establishing structure-property relationships, as well as for modeling such catalysts in ab initio calculations. Here, we show that an alloy, consisting of an oxophilic metal (Cu) diluted into a noble metal (Ag), forms a meta-stable two-dimensional oxide monolayer, when the alloy is subjected to oxidative reaction conditions. The presence of this oxide is correlated with selectivity in the corresponding test reaction of ethylene epoxidation. In the present study, using a combination of in situ, ex situ, and theoretical methods (NAP-XPS, XPEEM, LEED, and DFT), we determine the structure to be a two-dimensional analogue of Cu2O, resembling a single lattice plane of Cu2O. The overlayer holds a pseudo-epitaxial relationship with the underlying noble metal. Spectroscopic evidence shows that the oxide's electronic structure is qualitatively distinct from its three-dimensional counterpart, and because of weak electronic coupling with the underlying noble metal, it exhibits metallic properties. These findings provide precise details of this peculiar structure and valuable insights into how alloying can enhance catalytic properties.

8.
Angew Chem Int Ed Engl ; 59(14): 5651-5655, 2020 Mar 27.
Artigo em Inglês | MEDLINE | ID: mdl-31922307

RESUMO

The incorporation of impurities during the chemical synthesis of nanomaterials is usually uncontrolled and rarely reported because of the formidable challenge in measuring trace amounts of often light elements with sub-nanometer spatial resolution. And yet, these foreign elements (introduced by doping, for example) influence functional properties. We demonstrate how the hydrothermal growth and a partial reduction reaction on hollow TiO2 nanowires leads to the introduction of parts per millions of boron, sodium, and nitrogen. This doping explains the presence of oxygen vacancies and reduced Ti states at the surface, which enhance the functional properties of TiO2 . Our results were obtained on model metal oxide nanomaterials and they shed light on a general process that leads to the uncontrolled incorporation of trace impurities in TiO2 , thereby, having a strong effect on applications in energy-harvesting.

9.
Adv Mater ; 32(8): e1907235, 2020 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-31930769

RESUMO

Molybdenum disulfide (MoS2 ) nanosheet is a two-dimensional (2D) material with high electron mobility and with high potential for applications in catalysis and electronics. MoS2 nanosheets are synthesized using a one-pot wet-chemical synthesis route with and without Re doping. Atom probe tomography reveals that 3.8 at% Re is homogeneously distributed within the Re-doped sheets. Other impurities are also found integrated within the material: light elements including C, N, O, and Na, locally enriched up to 0.1 at%, as well as heavy elements such as V and W. Analysis of the nondoped sample reveals that the W and V likely originate from the Mo precursor. It is shown how wet-chemical synthesis results in an uncontrolled integration of species from the solution that can affect the material's activity. The results of this work are expected to contribute to an improved understanding of the relationships linking composition to properties of 2D transition-metal dichalcogenide materials.

10.
Phys Chem Chem Phys ; 21(20): 10457-10469, 2019 May 28.
Artigo em Inglês | MEDLINE | ID: mdl-31070222

RESUMO

Manganese-based systems are considered as candidate electrocatalysts for the electrochemical oxygen evolution reaction (OER), because of their abundance in biochemical oxygen producing catalyst systems. In this work, the surface of metallic manganese was investigated in situ and operando in potentiodynamic cyclic voltammetry (CV) experiments and potentiostatic chronoamperometry (CA) experiments in NaOH. In both cases, the surfaces were initially reduced. At corresponding potentials, no oxide species can be detected by Raman spectroscopy, though electrochemical data and the absence of dissolution above the reversible potential for reactions of type Mn → MnII indicate that the material is passive. The CV shows anodic peaks at potentials in line with expectations on the basis of thermodynamic data for the oxidation to Mn3O4 and Mn2O3; the thickness of the surface layer increases by a few nm during these peaks, as evidenced by spectroscopic ellipsometry. Dissolution of Mn as evidenced by downstream electrolyte analysis by inductively coupled plasma mass spectrometry in a scanning flow cell (SFC-ICP-MS) of the electrolyte is negligible in the range of electrode potential vs. Ag|AgCl|3 M KCl, EAg|AgCl, up to 0.3 V. Remarkably, Raman spectra already show the occurrence of α-MnO2 at EAg|AgCl > -0.25 V, which is ca. 0.5 V below the potential at which oxidation to MnO2 is expected. This observation is attributed to disproportionation above a certain level of MnIII. For EAg|AgCl > 0.4 V, dissolution sets in, at a constant layer thickness. Above the onset potential of the OER, at EAg|AgCl≈ 0.6 V, SFC-ICP-MS analysis shows fast dissolution, and the oxide layer thickness is constant or increases. CA experiments during the OER show strong dissolution, and the re-formation of a strongly disordered, ß-MnO2-like oxide, which exists in a quasi-stationary state at the interface. Several CV cycles increase the dissolution per cycle and the fraction of α-MnO2 on the surface which cannot be reduced. The high dissolution currents show that metallic Mn is hardly suitable as an OER catalyst, however, at least the MnIV oxides remain stationarily present in the system.

11.
ACS Appl Mater Interfaces ; 11(18): 16430-16442, 2019 May 08.
Artigo em Inglês | MEDLINE | ID: mdl-31017393

RESUMO

Anion substitution is an emerging strategy to enhance the photoelectrochemical performance of metal oxide photoelectrodes. In the present work, we investigate the effect of fluorine incorporation on the photoelectrochemical water oxidation performance of BiVO4 and Mo:BiVO4 thin film photoanodes. The BiVO4 and Mo:BiVO4 thin film photoanodes were prepared by a straightforward organometallic solution route involving dip coating and subsequent calcination in air. Fluorine modification was realized by applying a soft and low-cost solid-vapor reaction route involving fluorine-containing polymers and an inert gas atmosphere leading to novel F:BiVO4 and F/Mo:BiVO4 thin film photoanodes with substantially increased photoelectrochemical water oxidation properties. Deposition of the cobalt phosphate (CoPi) water oxidation catalyst allowed further enhancement of the photoelectrochemical performance. While Mo doping mainly improves light-harvesting, charge transport, and charge separation efficiencies, F modification was demonstrated to primarily affect the charge transfer efficiency at the semiconductor-electrolyte interface, thereby leading to a photocurrent increase of 40 and 21% upon fluorination of the BiVO4 and Mo:BiVO4 photoanodes, respectively, and an applied bias photon-to-current efficiency increase of 35 and 5%, respectively. We thereby could demonstrate that cation and anion co-doping in BiVO4 as demonstrated for Mo and F allows combining the photoelectrochemically relevant benefits associated with each type of dopant.

12.
Chem Rec ; 19(10): 2130-2142, 2019 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-30589199

RESUMO

Electrocatalyst degradation due to dissolution is one of the major challenges in electrochemical energy conversion technologies such as fuel cells and electrolysers. While tendencies towards dissolution can be grasped considering available thermodynamic data, the kinetics of material's stability in real conditions is still difficult to predict and have to be measured experimentally, ideally in-situ and/or on-line. On-line inductively coupled plasma mass spectrometry (ICP-MS) is a technique developed recently to address exactly this issue. It allows time- and potential-resolved analysis of dissolution products in the electrolyte during the reaction under dynamic conditions. In this work, applications of on-line ICP-MS techniques in studies embracing dissolution of catalysts for oxygen reduction (ORR) and evolution (OER) as well as hydrogen oxidation (HOR) and evolution (HER) reactions are reviewed.

13.
Nat Mater ; 17(7): 592-598, 2018 07.
Artigo em Inglês | MEDLINE | ID: mdl-29867166

RESUMO

Electrocatalysis is at the heart of our future transition to a renewable energy system. Most energy storage and conversion technologies for renewables rely on electrocatalytic processes and, with increasing availability of cheap electrical energy from renewables, chemical production will witness electrification in the near future1-3. However, our fundamental understanding of electrocatalysis lags behind the field of classical heterogeneous catalysis that has been the dominating chemical technology for a long time. Here, we describe a new strategy to advance fundamental studies on electrocatalytic materials. We propose to 'electrify' complex oxide-based model catalysts made by surface science methods to explore electrocatalytic reactions in liquid electrolytes. We demonstrate the feasibility of this concept by transferring an atomically defined platinum/cobalt oxide model catalyst into the electrochemical environment while preserving its atomic surface structure. Using this approach, we explore particle size effects and identify hitherto unknown metal-support interactions that stabilize oxidized platinum at the nanoparticle interface. The metal-support interactions open a new synergistic reaction pathway that involves both metallic and oxidized platinum. Our results illustrate the potential of the concept, which makes available a systematic approach to build atomically defined model electrodes for fundamental electrocatalytic studies.

14.
Angew Chem Int Ed Engl ; 57(9): 2488-2491, 2018 02 23.
Artigo em Inglês | MEDLINE | ID: mdl-29219237

RESUMO

Understanding the pathways of catalyst degradation during the oxygen evolution reaction is a cornerstone in the development of efficient and stable electrolyzers, since even for the most promising Ir based anodes the harsh reaction conditions are detrimental. The dissolution mechanism is complex and the correlation to the oxygen evolution reaction itself is still poorly understood. Here, by coupling a scanning flow cell with inductively coupled plasma and online electrochemical mass spectrometers, we monitor the oxygen evolution and degradation products of Ir and Ir oxides in situ. It is shown that at high anodic potentials several dissolution routes become possible, including formation of gaseous IrO3 . On the basis of experimental data, possible pathways are proposed for the oxygen-evolution-triggered dissolution of Ir and the role of common intermediates for these reactions is discussed.

15.
ChemSusChem ; 10(21): 4140-4143, 2017 11 09.
Artigo em Inglês | MEDLINE | ID: mdl-28922570

RESUMO

In searching for alternative oxygen evolution reaction (OER) catalysts for acidic water splitting, fast screening of the material intrinsic activity and stability in half-cell tests is of vital importance. The screening process significantly accelerates the discovery of new promising materials without the need of time-consuming real-cell analysis. In commonly employed tests, a conclusion on the catalyst stability is drawn solely on the basis of electrochemical data, for example, by evaluating potential-versus-time profiles. Herein important limitations of such approaches, which are related to the degradation of the backing electrode material, are demonstrated. State-of-the-art Ir-black powder is investigated for OER activity and for dissolution as a function of the backing electrode material. Even at very short time intervals materials like glassy carbon passivate, increasing the contact resistance and concealing the degradation phenomena of the electrocatalyst itself. Alternative backing electrodes like gold and boron-doped diamond show better stability and are thus recommended for short accelerated aging investigations. Moreover, parallel quantification of dissolution products in the electrolyte is shown to be of great importance for comparing OER catalyst feasibility.

16.
Sci Rep ; 7(1): 4595, 2017 07 04.
Artigo em Inglês | MEDLINE | ID: mdl-28676657

RESUMO

Tin-based oxides are attractive catalyst support materials considered for application in fuel cells and electrolysers. If properly doped, these oxides are relatively good conductors, assuring that ohmic drop in real applications is minimal. Corrosion of dopants, however, will lead to severe performance deterioration. The present work aims to investigate the potential dependent dissolution rates of indium tin oxide (ITO), fluorine doped tin oxide (FTO) and antimony doped tin oxide (ATO) in the broad potential window ranging from -0.6 to 3.2 VRHE in 0.1 M H2SO4 electrolyte. It is shown that in the cathodic part of the studied potential window all oxides dissolve during the electrochemical reduction of the oxide - cathodic dissolution. In case an oxidation potential is applied to the reduced electrode, metal oxidation is accompanied with additional dissolution - anodic dissolution. Additional dissolution is observed during the oxygen evolution reaction. FTO withstands anodic conditions best, while little and strong dissolution is observed for ATO and ITO, respectively. In discussion of possible corrosion mechanisms, obtained dissolution onset potentials are correlated with existing thermodynamic data.

17.
Angew Chem Int Ed Engl ; 56(30): 8809-8812, 2017 07 17.
Artigo em Inglês | MEDLINE | ID: mdl-28570025

RESUMO

Fe-N-C catalysts with high O2 reduction performance are crucial for displacing Pt in low-temperature fuel cells. However, insufficient understanding of which reaction steps are catalyzed by what sites limits their progress. The nature of sites were investigated that are active toward H2 O2 reduction, a key intermediate during indirect O2 reduction and a source of deactivation in fuel cells. Catalysts comprising different relative contents of FeNx Cy moieties and Fe particles encapsulated in N-doped carbon layers (0-100 %) show that both types of sites are active, although moderately, toward H2 O2 reduction. In contrast, N-doped carbons free of Fe and Fe particles exposed to the electrolyte are inactive. When catalyzing the ORR, FeNx Cy moieties are more selective than Fe particles encapsulated in N-doped carbon. These novel insights offer rational approaches for more selective and therefore more durable Fe-N-C catalysts.

18.
Angew Chem Int Ed Engl ; 56(33): 9767-9771, 2017 08 07.
Artigo em Inglês | MEDLINE | ID: mdl-28613404

RESUMO

A fundamental understanding of the behavior of non-noble based materials toward the hydrogen evolution reaction is crucial for the successful implementation into practical devices. Through the implementation of a highly sensitive inductively coupled plasma mass spectrometer coupled to a scanning flow cell, the activity and stability of non-noble electrocatalysts is presented. The studied catalysts comprise a range of compositions, including metal carbides (WC), sulfides (MoS2 ), phosphides (Ni5 P4 , Co2 P), and their base metals (W, Ni, Mo, Co); their activity, stability, and degradation behavior was elaborated and compared to the state-of-the-art catalyst platinum. The non-noble materials are stable at HER potentials but dissolve substantially when no current is flowing. Through pre- and post-characterization of the catalysts, explanations of their stability (thermodynamics and kinetics) are discussed, challenges for the application in real devices are analyzed, and strategies for circumventing dissolution are suggested. The precise correlation of metal dissolution with applied potential/current density allows for narrowing down suitable material choices as replacement for precious group metals as for example, platinum and opens up new ways in finding cost-efficient, active, and stable new-generation electrocatalysts.

19.
Angew Chem Int Ed Engl ; 55(25): 7247-51, 2016 06 13.
Artigo em Inglês | MEDLINE | ID: mdl-27139913

RESUMO

The increasing production and application of nanoparticles necessitates a highly sensitive analytical method for the quantification and identification of these potentially hazardous materials. We describe here an application of surface plasmon microscopy for the individual detection of each adsorbed nanoparticle and for visualization of its electrochemical conversion. Whereas the adsorption rate characterizes the number concentration of nanoparticles, the potential at which the adsorbed nanoparticles disappear during an anodic potential sweep characterizes the type of material. All the adsorbed nanoparticles are subjected to the potential sweep simultaneously; nevertheless, each of the up to a million adsorbed nanoparticles is identified individually by its electrochemical dissolution potential. The technique has been tested with silver and copper nanoparticles, but can be extended to many other electrochemically active nanomaterials.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA