RESUMO
Owing to the carcinogenicity and environmental risks as well as the wide industrial use of hydrazine, we report herein a colorimetric probe for its ratiometric detection in pure water. The developed probe possesses push-pull architecture with 2-(piperidyn-1-yl)thiophene as the donor, N,N'-dibutylbarbituric as the acceptor, and butadiene as the spacer. In contrast to weak solvatochromic behavior in organic solvents, the probe showed distinct optical photophysical properties in water resulting from the formation of nanoscopic aggregates. The probe underwent pronounced spectral changes upon the addition of hydrazine including an 11.5-fold decrease in absorbance and ~2.4-fold fluorescence quenching. The mechanistic investigation revealed the rapid formation of hydrazone upon the interaction of the probe with hydrazine via retro-Knoevenagel reaction as confirmed experimentally and corroborated with DFT calculations. The induced colorimetric and fluorometric changes were utilized in hydrazine sensing with excellent selectivity over other biologically relevant analytes with a detection limit of 0.76 µM in aqueous media. The practical utility of the probe was assessed in real-life natural water samples, while we have also developed a cost-effective portable kit for the on-site hydrazine detection both in the solution and vapor phases.
RESUMO
Tripodal push-pull chromophores with D-(π-A)3 arrangement were synthesized using 1-methyl-2,4,5-triphenyl-1H-imidazole as a central electron donor, and their thermal, electrochemical, photophysical and non-linear optical properties were studied and corroborated with quantum-chemical calculations. Their facile synthesis involved Suzuki-Miyaura and Knoevenagel reactions, allowing the installation of various peripheral electron acceptors such as formyl, cyano, ester, trifluoromethyl and more complex moieties such as malonic/acetic acid derivatives, indan-1,3-dione and rhodanine. All phenyl rings appended at the central imidazole core were more or less twisted depending on the peripheral substitution. Although imidazole undergoes reversible one-electron oxidation, peripheral acceptors are reduced irreversibly in a multi-electron process. This behaviour is further seen as a variation of the LUMO, while the HOMO remained almost unaltered across the whole series. TD-DFT calculations revealed centrifugal charge transfer from the central imidazole to all C2, C4 and C5 branches occupied by the LUMO, LUMO+1 and LUMO+2. The HOMO-LUMO gap is tuneable within the range of 3.55-2.31 eV, while the longest-wavelength absorption/emission maxima were found within the broad range of 304-448/393-612 nm. Although the absorption spectra are solvent-independent, the emission depends strongly on the solvent polarity and the electron-withdrawing power of the peripheral acceptors. Extended chromophores with complex electron acceptors were investigated as two-photon absorbers, revealing relatively good cross-section values of up to 521 GM and a figure-of-merit (ΦF × Î´2PA) of around 190 GM.
RESUMO
A photochemical cross-coupling protocol towards bi(hetero)aryls has been developed. The coupling reactions were mediated by dicyanopyrazine photoredox catalyst, while a photoinduced disproportionation process has been identified as an accompanying mechanism, especially for pyrrole derivatives. The developed method allows the cross-coupling of five-membered rings such as pyrrole, imidazole, thiazole and oxazole as well as various diazines (pyridine and pyrimidine) and benzene derivatives. A plausible mechanism of the reaction has also been disclosed. The practical application and relevance of the developed method were demonstrated by constructing an atorvastatin core or by the gradual functionalization of benzo[c][1,2,5]thiadiazole. In total, twenty-one bi(hetero)aryls were prepared in yields ranging from 19 to 95%.
RESUMO
Inspired by the successful utilization of aziniums as anolytes in redox-flow batteries, we have designed and prepared a systematically extended series of (di)azinium compounds based on pyrazine, bipyridine, 1,5-naphthyridine, 3,8-phenanthroline, (E)-4,4'-diazastilbene and 1,2-bis(pyridin-4-yl)acetylene. It has been revealed that the fundamental electrochemical properties are affected mostly by the water-solubility and chemical stability of the particular redox forms. Based on the systematically evolved azinium structure and gathered electrochemical data, structure-property relationships were thoroughly elucidated. Further investigation on flow battery cells identified that the known 4,4'-bipyridinium decorated with two peripheral N-propyl-3-sulfonato pendants allows utilizing both redox steps with good cycling stability, while the naphthyridine scaffold turned out to be a new and promising scaffold for redox-flow batteries.
RESUMO
Nine chromophores with ferrocene donor and pyridine/pyridinium acceptors have been prepared and further investigated. The performed X-ray analysis showed partially polarized and geometrically oblate pyridine unit. An extension of the π-system and N-quaternization were revealed as suitable tools for exclusive manipulation of the LUMO with the almost steady HOMO. Whereas the electrochemical HOMO-LUMO gap can be tuned from 3.01 to 1.49 eV, the high- and low-energy absorption bands were found within the range of 280-402/456-547 nm. The pyridinium chromophores showed distinct negative solvatochromism. A thorough DFT analysis has been performed; it turned out that ferrocene donor is capable of two principal D-A interactions, whose employment depends on the appended electron-withdrawing moiety.
RESUMO
The currently limited portfolio of volatile organoselenium compounds used for atomic layer deposition (ALD) has been extended by designing and preparing a series of four-, five- and six-membered cyclic silylselenides. Their fundamental properties were tailored by alternating the ring size, the number of embedded Se atoms and the used peripheral alkyl chains. In contrast to former preparations based on formation of sodium or lithium selenides, the newly developed synthetic method utilizes a direct and easy reaction of elemental selenium with chlorosilanes. Novel 2,2,4,4-tetraisopropyl-1,3,2,4-diselenadisiletane, which features good trade-off between chemical/thermal stability and reactivity, has been successfully used for gas-to-solid phase reaction with MoCl5 affording MoSe2. A thorough characterization of the as-deposited 2D MoSe2 flakes revealed its out-of-plane orientation and high purity. Hence, the developed four-membered cyclic silylselenide turned out to be well-suited Se-precursor for ALD of MoSe2.
RESUMO
Six pyrimidine-based push-pull systems substituted at positions C2 and C4/6 with phenylacridan and styryl moieties, employing methoxy or N,N-diphenylamino donors, have been designed and synthesized through cross-coupling and Knoevenagel reactions. X-ray analysis confirmed that the molecular structure featured the acridan moiety arranged perpendicularly to the residual π system. Photophysical studies revealed significant differences between the methoxy and N,N-diphenylamino chromophores. Solvatochromic studies revealed that the methoxy derivatives showed dual emission in polar solvents. Time-resolved spectroscopy revealed that the higher energy band involved very fast (<80â ps) fluorescence, whereas the lower energy one included long components (≈30â ns) due to long-lived intramolecular charge-transfer fluorescence. In contrast to N,N-diphenylamino chromophores, the methoxy derivatives also showed aggregation-induced emission in mixtures of THF/water, as well as dual emission in thin films, covering almost the whole visible spectrum with corresponding chromaticity coordinates not far from that of pure white light. These properties render the methoxy derivatives as very promising organic materials for white organic light-emitting diodes.
RESUMO
The current portfolio of organoselenium compounds applicable as volatile precursors for atomic layer deposition can be denoted as very limited. Hence, we report herein facile and cost-effective preparation of two bis(trialkylstannyl)selenides as well as one selenole and three bis(trialkylsilyl)selenides. Their syntheses have been optimized to: (i) use readily available and inexpensive starting materials, (ii) involve operationally simple methodology (heating in a pressure vessel), (iii) use a minimum amount of additives and catalysts, and (iv) either exclude additional purification or involve only simple distillation. The chemical structure of prepared Se derivatives was confirmed by multinuclear NMR and GC/MS. Their fundamental thermal properties were investigated by differential scanning calorimetry (DSC) and TGA methods that revealed thermal stability within the range of 160-300 °C.
Assuntos
Técnicas de Química Sintética/economia , Compostos Organosselênicos/síntese química , Compostos Orgânicos Voláteis/síntese química , Varredura Diferencial de Calorimetria , Catálise , Análise Custo-Benefício , Cromatografia Gasosa-Espectrometria de Massas , Chumbo/química , Espectroscopia de Ressonância Magnética , Compostos Organosselênicos/química , Oxigênio/química , Temperatura , TermogravimetriaRESUMO
A series of new push-pull chromophores based on a combined cyclopenta[c]thiophene-4,6-dione (ThDione) acceptor, N,N-dimethylaniline, N-piperidinylthiophene or ferrocene donors, and ethylene or buta-1,3-dienylene π-linkers has been designed and synthesized. Utilizing one or two ThDione acceptors afforded linear or branched push-pull molecules. Experimental and theoretical study of their fundamental properties revealed thermal robustness up to 260 °C, a electrochemical/optical HOMO-LUMO gap that is tunable within the range of 1.47-2.19/1.99-2.39â eV, and thorough elucidation of structure-property relationships. Compared to currently available portfolio of heterocyclic electron-withdrawing units, ThDione proved to be a powerful and versatile acceptor unit. It imparts significant intramolecular charge transfer and polarizes the π-system, which results in enhanced (non)linear optical response.
RESUMO
Three cyclic silylselenides were prepared in a straightforward manner. Property tuning has been achieved by varying the ring size and the number of embedded selenium atoms. All silylselenides possess improved resistance towards moisture and oxidation as well as high thermal robustness and sufficient volatility with almost zero residues. The six-membered diselenide proved to be particularly superior Se precursors for atomic layer deposition and allowed facile preparation of MoSe2 layers. Their structure and composition have been investigated by Raman and X-ray photoelectron spectroscopy as well as scanning electron microscopy revealing vertically aligned flaky shaped nanosheets.
RESUMO
Bipyridinium salts are currently very popular due to their perspective applications in redox flow batteries. Hence, we designed and prepared a series of bipyridiniums based on 2,2'-, 3,3'-, and 4,4'-bipyridine and 2,2'-bipyrimidine. The straightforward synthesis utilizes commercially or readily available starting compounds and their direct N-alkylation, mostly using 1,3-propanesultone. All eleven target derivatives with systematically evolved structure were investigated by cyclic voltammetry, which allowed elucidating thorough structure-property relationships. The electrochemical behavior depends primarily on the parent scaffold, type of N-alkylation, number of quaternized nitrogen atoms, planarity, counter ion as well as the used media. Two derivatives featuring quasi-reversible redox processes were further tested on rotating disc electrode and in a flow battery half-cell. 4,4'-Bipyridinium derivative bearing two sultone residues showed better performance and stability in the flow half-cell with small capacity decays of 0.09/0.15% per reduction-oxidation cycle, based on the number of the utilized redox processes (one/two).
RESUMO
Fourteen new D-π-A push-pull chromophores based on two isomeric thienothiophene donors and seven acceptors of various electronic natures have been designed and conveniently synthesized. In contrast to known thienothiophene push-pull molecules, the prepared small chromophores proved to be organic materials with easily tunable thermal, electrochemical and (non)linear optical properties. It has also been shown that small structural variation may result in significantly improved/varied fundamental properties. Very detailed structure-property relationships were elucidated within the systematically developed series of push-pull molecules, which may serve as a useful guide in designing new D-π-A molecules based on fused thiophene scaffolds.
RESUMO
As an extension of the successful dicyanopyrazine photoredox catalysts, a series of X-shaped push-pull molecules with a systematically altered structure were designed and facilely synthesized; their structure-property relationship was elucidated in detail via experimental as well as theoretical calculations. Dicyanopyrazines are proven to be powerful photoredox catalysts with a push-pull arrangement that allows facile property tuning by interchanging a particular part of the D-π-A system. Changing the mutual position of the cyano acceptors and the methoxy, methylthio and thienyl donors as well as modifying the linker allowed wide tuning of the fundamental properties of the catalysts. Contrary to the currently available organic photoredox catalysts, we provided a series of catalysts based on a pyrazine heterocyclic scaffold with easy synthesis and further modification, diverse photoredox characteristics and wide application potential across modern photoredox transformations. The photoredox catalytic activities of the target catalysts were examined in a benchmark cross-dehydrogenative coupling and novel and challenging annulation reactions.
RESUMO
The synthesis of a series of 20 new 2,4,6-tristyrylpyrimidines and three new 2,4-distyrylpyrimidines by means of combination of Knoevenagel condensation and Suzuki-Miyaura cross-coupling reaction is reported. This methodology enables us to obtain chromophores with identical or different substituent on each arm. The photophysical properties of the compounds are described. Optical properties and time-dependent density functional theory calculations indicate that photophysical properties of target compounds are mainly affected by the nature of the electron-donating group in C4/C6 positions, except when the C2 substituent is a significantly stronger electron-donating group. However, the C2 substituent has a strong influence on emission quantum yield: addition of a strong electron-donating group tends to decrease the fluorescence quantum yield, whereas a moderate electron-withdrawing group results in a significant increase of fluorescence quantum yield.
RESUMO
Nine new quadrupolar chromophores based on diketopyrrolopyrrole were designed and prepared by cross-coupling reactions. The property tuning has been achieved by structural variation of the peripheral substituents (donor) and enlargement of the π-system. Fundamental properties of target molecules were studied by differential scanning calorimetry, electrochemistry, and absorption and emission spectra. Nonlinear optical properties were studied by measuring the third harmonic generation. The experimental data were completed by quantum-chemical calculations and structure-property relationships were elucidated.
RESUMO
The synthesis of a series of push-pull derivatives bearing triphenylamine electron-donating group, cyclopenta[c]thiophen-4,6-dione electron acceptor and various π-linkers including (hetero)aromatic fragments is reported. All target chromophores with systematically varied π-linker structure were further investigated by electrochemistry, absorption measurements, and EFISH experiments in conjunction with DFT calculations. Based on electrochemical and photophysical measurements, when a polarizable 2,5-thienylene moiety is embedded into the chromophore π-backbone the highest intramolecular charge transfer (ICT) is observed. Benzene, pyrimidine, and pyridazine derivatives exhibit lower polarizability and extent of the ICT across these π-linkers. The elongation of the π-conjugated system via additional ethenylene linker results in a significant reduction of the HOMO-LUMO gap and an enhancement of the NLO response. Whereas it does not significantly influence electrochemical and linear optical properties, the orientation of the pyrimidine ring seems to be a key parameter on the µß value due to significant variation of the dipolar moment (µ) value. In 2a and 2c, pyrimidine is oriented to behave as an acceptor and thus generate dipolar molecule with µ above 5 D, whereas in 2b and 2d ground state dipole moment is significantly reduced. This study seems to indicate a high aromaticity of pyrimidine and pyridazine derivatives, close to the benzene analogues and significantly higher than thiophene analogues.
RESUMO
Push-pull molecules represent a unique and fascinating class of organic π-conjugated materials. Herein, we provide a summary of their recent extraordinary design inspired by letters of the alphabet, especially focusing on H-, L-, T-, V-, X-, and Y-shaped molecules. Representative structures from each class were presented and their fundamental properties and prospective applications were discussed. In particular, emphasis is given to molecules recently prepared in our laboratory with T-, X-, and Y-shaped arrangements based on indan-1,3-dione, benzene, pyridine, pyrazine, imidazole, and triphenylamine. These push-pull molecules turned out to be very efficient charge-transfer chromophores with tunable properties suitable for second-order nonlinear optics, two-photon absorption, reversible pH-induced and photochromic switching, photocatalysis, and intercalation.
RESUMO
We report here the synthesis of new NâSn-coordinated stannaoxidoborates H[LSnB4O6R4] {L = [2,6-(Me2NCH2)C6H3](-) and R = Ph (6), 4-Br-Ph (7), 3,5-(CF3)2-Ph (8), and 4-CHO-Ph (9)} containing a nonsymmetric SnB4O6 unit. Compounds 6-9 represent new derivatives of the pentaborates [B5O6R4](-) in which the central boron is substituted by a tin atom. Compounds 6-9 were characterized by means of elemental analysis, electrospray ionization mass spectrometry, and NMR spectroscopy and in the case of 6-8 also by single-crystal X-ray diffraction analysis. The structures of NâSn-coordinated stannaoxidoborates 6-8 consist of a spirobicyclic arrangement, with two six-membered SnB2O3 rings at the tin atom providing the new stannaoxidoborate [LSnB4O6R4](-) motif, which is compensated for by the proton atom coordinated to the Me2N group of the ligand L. The linear and thermal properties of 6-9 were studied with the help of electronic absorption spectra and differential scanning calorimetry. In addition, the presence of the nonsymmetric stannaoxidoborate SnB4O6 unit in 6, 7, and 9 prompted us to investigate their second-order nonlinear-optical properties.