Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Sci Rep ; 11(1): 9610, 2021 05 05.
Artigo em Inglês | MEDLINE | ID: mdl-33953260

RESUMO

We demonstrated the design of pre-additive manufacturing microalloying elements in tuning the microstructure of iron (Fe)-based alloys for their tunable mechanical properties. We tailored the microalloying stoichiometry of the feedstock to control the grain sizes of the metallic alloy systems. Two specific microalloying stoichiometries were reported, namely biodegradable iron powder with 99.5% purity (BDFe) and that with 98.5% (BDFe-Mo). Compared with the BDFe, the BDFe-Mo powder was found to have lower coefficient of thermal expansion (CTE) value and better oxidation resistance during consecutive heating and cooling cycles. The selective laser melting (SLM)-built BDFe-Mo exhibited high ultimate tensile strength (UTS) of 1200 MPa and fair elongation of 13.5%, while the SLM-built BDFe alloy revealed a much lower UTS of 495 MPa and a relatively better elongation of 17.5%, indicating the strength enhancement compared with the other biodegradable systems. Such an enhanced mechanical behavior in the BDFe-Mo was assigned to the dominant mechanism of ferrite grain refinement coupled with precipitate strengthening. Our findings suggest the tunability of outstanding strength-ductility combination by tailoring the pre-additive manufacturing microalloying elements with their proper concentrations.

2.
BMC Musculoskelet Disord ; 22(1): 171, 2021 Feb 11.
Artigo em Inglês | MEDLINE | ID: mdl-33573634

RESUMO

BACKGROUND: We developed a porous Ti alloy/PEEK composite interbody cage by utilizing the advantages of polyetheretherketone (PEEK) and titanium alloy (Ti alloy) in combination with additive manufacturing technology. METHODS: Porous Ti alloy/PEEK composite cages were manufactured using various controlled porosities. Anterior intervertebral lumbar fusion and posterior augmentation were performed at three vertebral levels on 20 female pigs. Each level was randomly implanted with one of the five cages that were tested: a commercialized pure PEEK cage, a Ti alloy/PEEK composite cage with nonporous Ti alloy endplates, and three composite cages with porosities of 40, 60, and 80%, respectively. Micro-computed tomography (CT), backscattered-electron SEM (BSE-SEM), and histological analyses were performed. RESULTS: Micro-CT and histological analyses revealed improved bone growth in high-porosity groups. Micro-CT and BSE-SEM demonstrated that structures with high porosities, especially 60 and 80%, facilitated more bone formation inside the implant but not outside the implant. Histological analysis also showed that bone formation was higher in Ti alloy groups than in the PEEK group. CONCLUSION: The composite cage presents the biological advantages of Ti alloy porous endplates and the mechanical and radiographic advantages of the PEEK central core, which makes it suitable for use as a single implant for intervertebral fusion.


Assuntos
Fusão Vertebral , Titânio , Animais , Desenvolvimento Ósseo , Feminino , Cetonas , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Polietilenoglicóis , Porosidade , Suínos , Microtomografia por Raio-X
3.
Int J Mol Sci ; 21(10)2020 May 21.
Artigo em Inglês | MEDLINE | ID: mdl-32455543

RESUMO

The interference screw fixation method is used to secure a graft in the tibial tunnel during anterior cruciate ligament reconstruction surgery. However, several complications have been reported, such as biodegradable screw breakage, inflammatory or foreign body reaction, tunnel enlargement, and delayed graft healing. Using additive manufacturing (AM) technology, we developed a titanium alloy (Ti6Al4V) interference screw with chemically calcium phosphate surface modification technology to improve bone integration in the tibial tunnel. After chemical and heat treatment, the titanium screw formed a dense apatite layer on the metal surface in simulated body fluid. Twenty-seven New Zealand white rabbits were randomly divided into control and additive manufactured (AMD) screw groups. The long digital extensor tendon was detached and translated into a tibial plateau tunnel (diameter: 2.0 mm) and transfixed with an interference screw while the paw was in dorsiflexion. Biomechanical analyses, histological analyses, and an imaging study were performed at 1, 3, and 6 months. The biomechanical test showed that the ultimate pull-out load failure was significantly higher in the AMD screw group in all tested periods. Micro-computed tomography analyses revealed early woven bone formation in the AMD screw group at 1 and 3 months. In conclusion, AMD screws with bioactive surface modification improved bone ingrowth and enhanced biomechanical performance in a rabbit model.


Assuntos
Parafusos Ósseos/normas , Osseointegração , Impressão Tridimensional , Tendões/cirurgia , Tíbia/cirurgia , Ligas/química , Animais , Parafusos Ósseos/efeitos adversos , Interface Osso-Implante/cirurgia , Fosfatos de Cálcio/química , Porosidade , Coelhos
4.
Sci Rep ; 7(1): 9727, 2017 08 29.
Artigo em Inglês | MEDLINE | ID: mdl-28852077

RESUMO

This study reports a mechanical stress-based technique that involves scratching or imprinting to write textured graphite conducting wires/patterns in an insulating amorphous carbon matrix for potential use as interconnects in future carbonaceous circuits. With low-energy post-annealing below the temperature that is required for the thermal graphitization of amorphous carbon, the amorphous carbon phase only in the mechanically stressed regions transforms into a well aligned crystalline graphite structure with a low electrical resistivity of 420 µΩ-cm, while the surrounding amorphous carbon matrix remains insulating. Micro-Raman spectra with obvious graphitic peaks and high-resolution transmission electron microscopic observations of clear graphitic lattice verified the localized phase transformation of amorphous carbon into textured graphite exactly in the stressed regions. The stress-induced reconstruction of carbon bonds to generate oriented graphitic nuclei is believed to assist in the pseudo-self-formation of textured graphite during low-temperature post annealing.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...