Remarkably Enhanced Lattice Oxygen Participation in Perovskites to Boost Oxygen Evolution Reaction.

Enhancing the participation of the lattice oxygen mechanism (LOM) in several perovskites to significantly boost the oxygen evolution reaction (OER) is daunting. With the rapid decline in fossil fuels, energy research is turning toward water splitting to produce usable hydrogen by significantly reducing overpotential for other half-cells' OER. Recent studies have shown that in addition to the conventional adsorbate evolution mechanism (AEM), participation of LOM can overcome their prevalent scaling relationship limitations. Here, we report the acid treatment strategy and bypass the cation/anion doping strategy to significantly enhance LOM participation. Our perovskite demonstrated a current density of 10 mA cm-2 at an overpotential of 380 mV and a low Tafel slope (65 mV dec-1) much lower than IrO2 (73 mV dec-1). We propose that the presence of nitric acid-induced defects regulates the electronic structure and thereby lowers oxygen binding energy, allowing enhanced LOM participation to boost OER significantly.

Design of XS2 (X = W or Mo)-Decorated VS2 Hybrid Nano-Architectures with Abundant Active Edge Sites for High-Rate Asymmetric Supercapacitors and Hydrogen Evolution Reactions.

Two-dimensional layered transition metal dichalcogenides have emerged as promising materials for supercapacitors and hydrogen evolution reaction (HER) applications. Herein, the molybdenum sulfide (MoS2 )@vanadium sulfide (VS2 ) and tungsten sulfide (WS2 )@VS2  hybrid nano-architectures prepared via a facile one-step hydrothermal approach is reported. Hierarchical hybrids lead to rich exposed active edge sites, tuned porous nanopetals-decorated morphologies, and high intrinsic activity owing to the strong interfacial interaction between the two materials. Fabricated supercapacitors using MoS2 @VS2  and WS2 @VS2  electrodes exhibit high specific capacitances of 513 and 615 F g- 1 , respectively, at an applied current of 2.5 A g- 1  by the three-electrode configuration. The asymmetric device fabricated using WS2 @VS2  electrode exhibits a high specific capacitance of 222 F g- 1  at an applied current of 2.5 A g- 1  with the specific energy of 52 Wh kg- 1  at a specific power of 1 kW kg- 1 . For HER, the WS2 @VS2  catalyst shows noble characteristics with an overpotential of 56 mV to yield 10 mA cm- 2 , a Tafel slope of 39 mV dec-1 , and an exchange current density of 1.73 mA cm- 2 . In addition, density functional theory calculations are used to evaluate the durable heterostructure formation and adsorption of hydrogen atom on the various accessible sites of MoS2 @VS2  and WS2 @VS2  heterostructures.

Hysteresis Induced by Incomplete Cationic Redox in Li-Rich 3d-Transition-Metal Layered Oxides Cathodes.

Activation of oxygen redox during the first cycle has been reported as the main trigger of voltage hysteresis during further cycles in high-energy-density Li-rich 3d-transition-metal layered oxides. However, it remains unclear whether hysteresis only occurs due to oxygen redox. Here, it is identified that the voltage hysteresis can highly correlate to cationic reduction during discharge in the Li-rich layered oxide, Li1.2 Ni0.4 Mn0.4 O2 . In this material, the potential region of discharge accompanied by hysteresis is apparently separated from that of discharge unrelated to hysteresis. The quantitative analysis of soft/hard X-ray absorption spectroscopies discloses that hysteresis is associated with an incomplete cationic reduction of Ni during discharge. The galvanostatic intermittent titration technique shows that the inevitable energy consumption caused by hysteresis corresponds to an overpotential of 0.3 V. The results unveil that hysteresis can also be affected by cationic redox in Li-rich layered cathodes, implying that oxygen redox cannot be the only reason for the evolution of voltage hysteresis. Therefore, appropriate control of both cationic and anionic redox of Li-rich layered oxides will allow them to reach their maximum energy density and efficiency.

MoO3@MoS2 Core-Shell Structured Hybrid Anode Materials for Lithium-Ion Batteries.

We explore a phase engineering strategy to improve the electrochemical performance of transition metal sulfides (TMSs) in anode materials for lithium-ion batteries (LIBs). A one-pot hydrothermal approach has been employed to synthesize MoS2 nanostructures. MoS2 and MoO3 phases can be readily controlled by straightforward calcination in the (200-300) °C temperature range. An optimized temperature of 250 °C yields a phase-engineered MoO3@MoS2 hybrid, while 200 and 300 °C produce single MoS2 and MoO3 phases. When tested in LIBs anode, the optimized MoO3@MoS2 hybrid outperforms the pristine MoS2 and MoO3 counterparts. With above 99% Coulombic efficiency (CE), the hybrid anode retains its capacity of 564 mAh g-1 after 100 cycles, and maintains a capacity of 278 mAh g-1 at 700 mA g-1 current density. These favorable characteristics are attributed to the formation of MoO3 passivation surface layer on MoS2 and reactive interfaces between the two phases, which facilitate the Li-ion insertion/extraction, successively improving MoO3@MoS2 anode performance.

Understanding the Structural Phase Transitions in Na3 V2 (PO4 )3 Symmetrical Sodium-Ion Batteries Using Synchrotron-Based X-Ray Techniques.

Sodium-ion batteries (SIBs) hold great potential for use in large-scale grid storage applications owing to their low energy cost compared to lithium analogs. The symmetrical SIBs employing Na3 V2 (PO4 )3 (NVP) as both the cathode and anode are considered very promising due to negligible volume changes and longer cycle life. However, the structural changes associated with the electrochemical reactions of symmetrical SIBs employing NVP have not been widely studied. Previous studies on symmetrical SIBs employing NVP are believed to undergo one mole of Na+ storage during the electrochemical reaction. However, in this study, it is shown that there are significant differences during the electrochemical reaction of the symmetrical NVP system. The symmetrical sodium-ion cell undergoes ≈2 moles of Na+ reaction (intercalation and deintercalation) instead of 1 mole of Na+ . A simultaneous formation of Na5 V2 (PO4 )3 phase in the anode and NaV2 (PO4 )3 phase in the cathode is revealed by synchrotron-based X-ray diffraction and X-ray absorption spectroscopy. A symmetrical NVP cell can deliver a stable capacity of ≈99 mAh g-1 , (based on the mass of the cathode) by simultaneously utilizing V3+ /V2+ redox in anode and V3+ /V4+ redox in cathode. The current study provides new insights for the development of high-energy symmetrical NIBs for future use.

Reduced Potential Barrier of Sodium-Substituted Disordered Rocksalt Cathode for Oxygen Evolution Electrocatalysts.

Cation-disordered rocksalt (DRX) cathodes have been viewed as next-generation high-energy density materials surpassing conventional layered cathodes for lithium-ion battery (LIB) technology. Utilizing the opportunity of a better cation mixing facility in DRX, we synthesize Na-doped DRX as an efficient electrocatalyst toward oxygen evolution reaction (OER). This novel OER electrocatalyst generates a current density of 10 mA cm−2 at an overpotential (η) of 270 mV, Tafel slope of 67.5 mV dec−1, and long-term stability >5.5 days' superior to benchmark IrO2 (η = 330 mV with Tafel slope = 74.8 mV dec−1). This superior electrochemical behavior is well supported by experiment and sparse Gaussian process potential (SGPP) machine learning-based search for minimum energy structure. Moreover, as oxygen binding energy (OBE) on the surface closely relates to OER activity, our density functional theory (DFT) calculations reveal that Na-doping assists in facile O2 evolution (OBE = 5.45 eV) compared with pristine-DRX (6.51 eV).

New O3-Type Layer-Structured Na0.80[Fe0.40Co0.40Ti0.20]O2 Cathode Material for Rechargeable Sodium-Ion Batteries.

Herein, we formulated a new O3-type layered Na0.80[Fe0.40Co0.40Ti0.20]O2 (NFCTO) cathode material for sodium-ion batteries (SIBs) using a double-substitution concept of Co in the parent NaFe0.5Co0.5O2, having the general formula Na1-x[Fe0.5-x/2Co0.5-x/2M4+x]O2 (M4+ = tetravalent ions). The NFCTO electrode delivers a first discharge capacity of 108 mAhg-1 with 80% discharge capacity retention after 50 cycles. Notably, the first charge-discharge profile shows asymmetric yet reversible redox reactions. Such asymmetric redox reactions and electrochemical properties of the NFCTO electrode were correlated with the phase transition behavior and charge compensation reaction using synchrotron-based in situ XRD and ex situ X-ray absorption spectroscopy. This study provides an exciting opportunity to explore the interplay between the rich chemistry of Na1-x[Fe0.5-x/2Co0.5-x/2M4+x]O2 and sodium storage properties, which may lead to the development of new cathode materials for SIBs.

Development of a highly active FeNC catalyst with the preferential formation of atomic iron sites for oxygen reduction in alkaline and acidic electrolytes.

Nitrogen-doped porous carbons containing atomically dispersed iron are prime candidates for substituting platinum-based catalysts for oxygen reduction reaction (ORR) in fuel cells. These carbon catalysts are classically synthesizedviacomplicated routes involving multiple heat-treatment steps to form the desired Fe-Nx sites. We herein developed a highly active FeNC catalyst comprising of exclusive Fe-Nx sites by a simplified solid-state synthesis protocol involving only a single heat-treatment. Imidazole is pyrolyzed in the presence of an inorganic salt-melt resulting in highly porous carbon sheets decorated with abundant Fe-Nx centers, which yielded a high density of electrochemically accessible active sites (1.36 × 1019 sites g-1) as determined by the in situ nitrite stripping technique. The optimized catalyst delivered a remarkable ORR activity with a half-wave potential (E1/2) of 0.905 VRHE in alkaline electrolyte surpassing the benchmark Pt catalyst by 55 mV. In acidic electrolyte, an E1/2 of 0.760 VRHE is achieved at a low loading level (0.29 mg cm-2). In PEMFC tests, a current density of 2.3 mA cm-2 is achieved at 0.90 ViR-free under H2-O2 conditions, reflecting high kinetic activity of the optimized catalyst.

Hierarchical Mo2C@CNT Hybrid Structure Formation for the Improved Lithium-Ion Battery Storage Performance.

2-D transition metal carbides (TMCs)-based anode materials offer competitive performance in lithium-ion batteries (LIBs) owing to its excellent conductivity; cheaper, flexible uses; and superior mechanical stability. However, the electrochemical energy storage of TMCs is still the major obstacle due to their modest capacity and the trends of restacking/aggregation. In this report, the Mo2C nanosheets were attached on conductive CNT network to form a hierarchical 2D hybrid structure, which not only alleviated the aggregation of the Mo2C nanoparticle and facilitated the rapid transference of ion/electron, but also adapted effectually to the hefty volume expansion of Mo2C nanosheets and prevented restacking/collapse of Mo2C structure. Benefitting from the layered Mo2@CNT hybrid structure, the charge/discharge profile produced a 200 mAh g-1 discharge-specific capacity (second cycle) and 132 mAh g-1 reversible-discharge discharge-specific capacity (after 100 cycles) at 50 mA g-1 current density, with high-speed competency and superior cycle stability. The improved storage kinetics for Mo2@CNT hybrid structure are credited to the creation of numerous active catalytic facets and association reaction between the CNT and Mo2C, promoting the efficient electron transfer and enhancing the cycling stability.

Tailoring Solution-Processable Li Argyrodites Li6+xP1-xMxS5I (M = Ge, Sn) and Their Microstructural Evolution Revealed by Cryo-TEM for All-Solid-State Batteries.

Owing to their high Li+ conductivities, mechanical sinterability, and solution processability, sulfide Li argyrodites have attracted much attention as enablers in the development of high-performance all-solid-state batteries with practicability. However, solution-processable Li argyrodites have been developed only for a composition of Li6PS5X (X = Cl, Br, I) with insufficiently high Li+ conductivities (∼10-4 S cm-1). Herein, we report the highest Li+ conductivity of 0.54 mS cm-1 at 30 °C (Li6.5P0.5Ge0.5S5I) for solution-processable iodine-based Li argyrodites. A comparative investigation of three iodine-based argyrodites of unsubstituted and Ge- and Sn-substituted solution-processed Li6PS5I with varied heat-treatment temperature elucidates the effect of microstructural evolution on Li+ conductivity. Notably, local nanostructures consisting of argyrodite nanocrystallites in solution-processed Li6.5P0.5Ge0.5S5I have been directly captured by cryogenic transmission electron microscopy, which is a first for sulfide solid electrolyte materials. Specifically, the promising electrochemical performances of all-solid-state batteries at 30 °C employing LiCoO2 electrodes tailored by the infiltration of Li6.5P0.5Ge0.5S5I-ethanol solutions are successfully demonstrated.

Probing the Sodium Insertion/Extraction Mechanism in a Layered NaVO3 Anode Material.

For the realization of sodium-ion batteries (SIBs), high-performance anode materials are urgently required with the advantages of being low-cost and environment-friendly. In this work, layered-type NaVO3 is prepared by the simple solid-state route with a rod-like morphology and used as an anode material for SIBs. The NaVO3 electrode exhibits a high specific capacity of 196 mA h g-1 during the first cycle and retains a capacity of 125 mA h g-1 at the 80th cycle with a high Coulombic efficiency of >99%, demonstrating high reversibility. The sodium diffusion coefficient in NaVO3 is measured using electrochemical impedance spectroscopy (1.368 × 10-15 cm2 s-1), the galvanostatic intermittent titration technique (1.15715 × 10-13 cm2 s-1), and cyclic voltammetry (2.7935 × 10-16 cm2 s-1). Furthermore, the reaction mechanism during the sodiation/desodiation process is investigated using in situ X-ray diffraction and X-ray absorption near the edge structure analysis, which suggests the formation of an amorphous-like phase and reversible redox reaction of V4+ ↔ V5+, respectively.

Superior shuttling of lithium and sodium ions in manganese-doped titania @ functionalized multiwall carbon nanotube anodes.

In order to improve the electrochemical kinetics of anatase titania (TiO2), Mn-doped TiO2 incorporated with functionalized multiwall carbon nanotubes (MWCNTs) has been prepared by a modified hydrothermal method and tested for both lithium (LIB) and sodium-ion battery (SIB) anodes. The size of the TiO2 particles is controlled to ∼35-40 nm, with almost even distribution on the MWCNTs surface. The nanostructuring and appropriate doping of cost-effective manganese into the TiO2 host improved the electrochemical performance in terms of high rate capability and specific capacity for both the rechargeable battery systems. For the LIBs, the charge capacity of the 5% Mn-TiO2/MWCNT anode is 226.3 mA h g-1 in the first cycle, and is retained at 176.4 mA h g-1 after 80 cycles as compared with the SIBs, in which the charge capacity is 152.1 mA h g-1 in the first cycle, and is retained at 121.4 mA h g-1 after 80 cycles. After testing the electrodes at a high current rate of 20C, the nanocomposite electrode can still demonstrate charge capacities of 131.2 and 117.2 mA h g-1 at a 0.1C rate for LIBs and SIBs, respectively. The incorporation of Mn-ions (2+, 4+) is found to play a crucial role in terms of defects and vacancy creation, increasing conduction band electrons and lattice expansion to facilitate alkali metal ion diffusion for superior electrochemical performance. The combination of heteroatom doping and use of a highly conductive additive in the form of MWCNTs has resulted in excellent electrode integrity, high ion accessibility, and fast electron transport. Its outstanding cycling stability and remarkable rate performance make the 5% Mn-TiO2/MWCNT a promising anode material for high-performance LIBs and SIBs.

Lithium intercalation mechanism into FeF3·0.5H2O as a highly stable composite cathode material.

The growing demand for lithium-ion batteries (LIBs) requires investigation of high-performance electrode materials with the advantages of being environmentally friendly and cost-effective. In this study, a nanocomposite of open-pyrochlore-structured FeF3·0.5H2O and reduced graphene oxide (RGO) is synthesized for use as a high-performance cathode in LIBs, where RGO provides high electrical conductivity to the composite material. The morphology of the composite shows that FeF3·0.5H2O spheres are embedded into RGO layers and high-resolution TEM image shows that those spheres are composed of primary nanoparticles with a size of ~5 nm. The cycling performance indicates that the composite electrode delivers an initial high discharge capacity of 223 mAh g-1 at 0.05 C, a rate capability up to a high C-rate of 10 C (47 mAh g-1) and stable cycle performance at 0.05 C (145 mAh g-1 after 100 cycles) and 0.2 C (93 mAh g-1 after 100 cycles) while maintaining high electrochemical reversibility. Furthermore, the responsible electrochemical reaction is investigated using in-situ XRD and synchrotron-based X-ray absorption spectroscopy (XAS), and the XRD results show that FeF3·0.5H2O transitions to an amorphous-like phase through a lithiation process. However, a reversible oxidation change of Fe3+ ↔ Fe2+ is identified by the XAS results.

Polythiophene-Wrapped Olivine NaFePO4 as a Cathode for Na-Ion Batteries.

The surface of olivine NaFePO4 was modified with polythiophene (PTh) to develop a high-performance cathode material for use in Na-ion batteries. The Rietveld refinement results of the prepared material reveal that PTh-coated NaFePO4 belongs to a space group of Pnma with lattice parameters of a = 10.40656 Å, b = 6.22821 Å, and c = 4.94971 Å. Uncoated NaFePO4 delivers a discharge capacity of 108 mAh g(-1) at a current density of 10 mA g(-1) within a voltage range of 2.2-4.0 V. Conversely, the PTh-coated NaFePO4 electrode exhibits significantly improved electrochemical performance, where it exhibits a discharge capacity of 142 mAh g(-1) and a stable cycle life over 100 cycles, with a capacity retention of 94%. The NaFePO4/PTh electrode also exhibits satisfactory performance at high current densities, and reversible capacities of 70 mAh g(-1) at 150 mA g(-1) and 42 mAh g(-1) at 300 mA g(-1) are obtained compared with negligible capacities without coating. The related electrochemical reaction mechanism has been investigated using in situ X-ray absorption spectroscopy (XAS), which revealed a systematic change of Fe valence and reversible contraction/expansion of Fe-O octahedra upon desodiation/sodiation. The ex situ X-ray diffraction (XRD) results suggest that the deintercalation in NaFePO4/PTh electrodes proceeds through a stable intermediate phase and the lattice parameters show a reversible contraction/expansion of unit cell during cycling.

SnS 3D Flowers with Superb Kinetic Properties for Anodic Use in Next-Generation Sodium Rechargeable Batteries.

Tin sulfide (SnS) 3D flowers containing hierarchical nanosheet subunits are synthesized using a simple polyol process. The Li ion cells incorporating SnS 3D flowers exhibit an excellent rate capability, as well as good cycling stability, compared to SnS bulks and Sn nanoparticles. These desirable properties can be attributed to their unique morphology having not only large surface reaction area but also enough space between individual 2D nanosheets, which alleviates the pulverization of SnS.

Investigation of the Na Intercalation Mechanism into Nanosized V2O5/C Composite Cathode Material for Na-Ion Batteries.

There is a significant interest to develop high-performance and cost-effective electrode materials for next-generation sodium ion batteries. Herein, we report a facile synthesis method for nanosized V2O5/C composite cathodes and their electrochemical performance as well as energy storage mechanism. The composite exhibits a discharge capacity of 255 mAh g(-1) at a current density of 0.05 C, which surpasses that of previously reported layered oxide materials. Furthermore, the electrode shows good rate capability; discharge capacity of 160 mAh g(-1) at a current density of 1 C. The reaction mechanism of V2O5 upon sodium insertion/extraction is investigated using ex situ X-ray diffraction (XRD) and synchrotron based near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Ex situ XRD result of the fully discharged state reveals the appearance of NaV2O5 as a major phase with minor Na2V2O5 phase. Upon insertion of sodium into the array of parallel ladders of V2O5, it was confirmed that lattice parameter of c is increased by 9.09%, corresponding to the increase in the unit-cell volume of 9.2%. NEXAFS results suggest that the charge compensation during de/sodiation process accompanied by the reversible changes in the oxidation state of vanadium (V(4+) ↔ V(5+)).

Tuning charge-discharge induced unit cell breathing in layer-structured cathode materials for lithium-ion batteries.

For LiMO2 (M=Co, Ni, Mn) cathode materials, lattice parameters, a(b), contract during charge. Here we report such changes in opposite directions for lithium molybdenum trioxide (Li2MoO3). A 'unit cell breathing' mechanism is proposed based on crystal and electronic structural changes of transition metal oxides during charge-discharge. Metal-metal bonding is used to explain such 'abnormal' behaviour and a generalized hypothesis is developed. The expansion of the metal-metal bond becomes the controlling factor for a(b) evolution during charge, in contrast to the shrinking metal-oxygen bond as controlling factor in 'normal' materials. The cation mixing caused by migration of molybdenum ions at higher oxidation state provides the benefits of reducing the c expansion range in the early stage of charging and suppressing the structure collapse at high voltage charge. These results may open a new strategy for designing layered cathode materials for high energy density lithium-ion batteries.

Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy.

Thermal stability of charged LiNixMnyCozO2 (NMC, with x + y + z = 1, x:y:z = 4:3:3 (NMC433), 5:3:2 (NMC532), 6:2:2 (NMC622), and 8:1:1 (NMC811)) cathode materials is systematically studied using combined in situ time-resolved X-ray diffraction and mass spectroscopy (TR-XRD/MS) techniques upon heating up to 600 °C. The TR-XRD/MS results indicate that the content of Ni, Co, and Mn significantly affects both the structural changes and the oxygen release features during heating: the more Ni and less Co and Mn, the lower the onset temperature of the phase transition (i.e., thermal decomposition) and the larger amount of oxygen release. Interestingly, the NMC532 seems to be the optimized composition to maintain a reasonably good thermal stability, comparable to the low-nickel-content materials (e.g., NMC333 and NMC433), while having a high capacity close to the high-nickel-content materials (e.g., NMC811 and NMC622). The origin of the thermal decomposition of NMC cathode materials was elucidated by the changes in the oxidation states of each transition metal (TM) cations (i.e., Ni, Co, and Mn) and their site preferences during thermal decomposition. It is revealed that Mn ions mainly occupy the 3a octahedral sites of a layered structure (R3̅m) but Co ions prefer to migrate to the 8a tetrahedral sites of a spinel structure (Fd3̅m) during the thermal decomposition. Such element-dependent cation migration plays a very important role in the thermal stability of NMC cathode materials. The reasonably good thermal stability and high capacity characteristics of the NMC532 composition is originated from the well-balanced ratio of nickel content to manganese and cobalt contents. This systematic study provides insight into the rational design of NMC-based cathode materials with a desired balance between thermal stability and high energy density.

In situ soft XAS study on nickel-based layered cathode material at elevated temperatures: a novel approach to study thermal stability.

Tracking thermally induced reactions has always been challenging for electrode materials of electrochemical battery systems. Traditionally, a variety of calorimetric techniques and in situ XRD at elevated temperatures has been used to evaluate the thermal stability of electrode materials. These techniques are capable of providing variations in heat capacity, mass and average bulk composition of materials only. Herein, we report investigation of thermal characteristics of Li0.33Ni0.8Co0.15Al0.05O2 by using in situ soft XAS measurements in combination with XRD. Fluorescence yield and partial electron yield measurements are used simultaneously to obtain element selective surface and bulk information. Fluorescence yield measurements reveal no energy change of the absorption peak and thus no valence state change in the bulk. However, electron yield measurements indicate that NiO-type rock salt structure is formed at the surface at temperatures above 200°C while no evidence for a surface reaction near Co sites in investigated temperature range is found. These results clearly show that in situ soft XAS can give a unique understanding of the role of each element in the structural transformation under thermal abuse offering a useful guidance in developing new battery system with improved safety performance.

Structures of delithiated and degraded LiFeBO(3), and their distinct changes upon electrochemical cycling.

Lithium iron borate (LiFeBO3) has a high theoretical specific capacity (220 mAh/g), which is competitive with leading cathode candidates for next-generation lithium-ion batteries. However, a major factor making it difficult to fully access this capacity is a competing oxidative process that leads to degradation of the LiFeBO3 structure. The pristine, delithiated, and degraded phases of LiFeBO3 share a common framework with a cell volume that varies by less than 2%, making it difficult to resolve the nature of the delithiation and degradation mechanisms by conventional X-ray powder diffraction studies. A comprehensive study of the structural evolution of LiFeBO3 during (de)lithiation and degradation was therefore carried out using a wide array of bulk and local structural characterization techniques, both in situ and ex situ, with complementary electrochemical studies. Delithiation of LiFeBO3 starts with the production of LitFeBO3 (t ≈ 0.5) through a two-phase reaction, and the subsequent delithiation of this phase to form Lit-xFeBO3 (x < 0.5). However, the large overpotential needed to drive the initial two-phase delithiation reaction results in the simultaneous observation of further delithiated solid-solution products of Lit-xFeBO3 under normal conditions of electrochemical cycling. The degradation of LiFeBO3 also results in oxidation to produce a Li-deficient phase D-LidFeBO3 (d ≈ 0.5, based on the observed Fe valence of ∼2.5+). However, it is shown through synchrotron X-ray diffraction, neutron diffraction, and high-resolution transmission electron microscopy studies that the degradation process results in an irreversible disordering of Fe onto the Li site, resulting in the formation of a distinct degraded phase, which cannot be electrochemically converted back to LiFeBO3 at room temperature. The Li-containing degraded phase cannot be fully delithiated, but it can reversibly cycle Li (D-Lid+yFeBO3) at a thermodynamic potential of ∼1.8 V that is substantially reduced relative to the pristine phase (∼2.8 V).