Amine-Functionalized Natural Rubber/Mesostructured Silica Nanocomposites for Adsorptive Removal of Clofibric Acid in Aqueous Phase.

This study is the first report on the synthesis, characterization and application of amine-functionalized mesoporous nanocomposites based on natural rubber (NR) and wormhole-like mesostructured silica (WMS). In comparison with amine-functionalized WMS (WMS-NH2), a series of NR/WMS-NH2 composites were synthesized via an in situ sol-gel method in which the organo-amine group was grafted onto the nanocomposite surface via co-condensation with 3-aminopropyltrimethoxysilane (APS) as the amine-functional group precursor. The NR/WMS-NH2 materials had a high specific surface area (115-492 m2 g-1) and total pore volume (0.14-1.34 cm3 g-1) with uniform wormhole-like mesoporous frameworks. The amine concentration of NR/WMS-NH2 (0.43-1.84 mmol g-1) was increased with an increase in the APS concentration, corresponding to high levels of functionalization with the amine groups of 53-84%. The H2O adsorption-desorption measurement revealed that NR/WMS-NH2 possessed higher hydrophobicity than WMS-NH2. The removal of clofibric acid (CFA), a xenobiotic metabolite of the lipid-lowering drug clofibrate, from the aqueous solution using WMS-NH2 and NR/WMS-NH2 materials was investigated using a batch adsorption experiment. The adsorption was a chemical process in which the pseudo-second order kinetic model expressed the sorption kinetic data better than the pseudo first-order and Ritchie-second kinetic order model. In addition, the CFA adsorption sorption equilibrium data of the NR/WMS-NH2 materials were fitted to the Langmuir isotherm model. The NR/WMS-NH2 with 5% amine loading had the highest CFA adsorption capacity (6.29 mg g-1).

Glycerol-Based Retrievable Heterogeneous Catalysts for Single-Pot Esterification of Palm Fatty Acid Distillate to Biodiesel.

The by-product of the previous transesterification, glycerol was utilised as an acid catalyst precursor for biodiesel production. The crude glycerol was treated through the sulfonation method with sulfuric acid and chlorosulfonic acid in a reflux batch reactor giving solid glycerol-SO3H and glycerol-ClSO3H, respectively. The synthesised acidic glycerol catalysts were characterised by various analytical techniques such as thermalgravimetric analyser (TGA), infrared spectroscopy, surface properties adsorption-desorption by nitrogen gas, ammonia-temperature programmed desorption (NH3-TPD), X-ray diffraction spectroscopy (XRD), elemental composition analysis by energy dispersive spectrometer (EDX) and surface micrographic morphologies by field emission electron microscope (FESEM). Both glycerol-SO3H and glycerol-ClSO3H samples exhibited mesoporous structures with a low surface area of 8.85 mm2/g and 4.71 mm2/g, respectively, supported by the microscopic image of blockage pores. However, the acidity strength for both catalysts was recorded at 3.43 mmol/g and 3.96 mmol/g, which is sufficient for catalysing PFAD biodiesel at the highest yield. The catalytic esterification was optimised at 96.7% and 98.2% with 3 wt.% of catalyst loading, 18:1 of methanol-PFAD molar ratio, 120 °C, and 4 h of reaction. Catalyst reusability was sustained up to 3 reaction cycles due to catalyst deactivation, and the insight investigation of spent catalysts was also performed.

Sustainable processing of algal biomass for a comprehensive biorefinery.

Nearly 15 billion metric tons of fossil fuels are consumed each year all over the world resulting in the depletion of non-renewable energy resources day by day therefore in the coming years, the shortage and price hikes of these fuels are inevitable. On the other hand, the global energy demand is projected to rise by almost 28% by 2040 compared to current levels. Thus, there is a dire need for developing the alternatives to meet these energy needs. Biomass is seen as a significant alternative energy source to fossil fuels from this standpoint. The main bottle neck in utilizing the biomass for this purpose is the lack of an efficient conversion or pretreatment technology which prompted scientists to delve into novel stepwise biomass conversion technologies. This review article encompasses various methods for the processing the algal biomass to generate potential biobased products such as algal crude oil, biogas, and fuel alcohols. Among the various techniques of thermochemical conversion of algal biomass, hydrothermal liquefaction and gasification are the most sustainable ones. Furthermore, anaerobic digestion of lignocellulosic biomass is the commercially workable technique providing biogas and biohydrogen. Future generations may find algal biofuels to be low-cost and ecologically benign alternative to fossil fuels. This review is a connotative illustration of the conversion technologies for algal biomass, which includes both thermochemical and biochemical processes. It also highlights the salient features along with the limitations of each of these technologies and bearing in mind the expansion of a superstructure depiction to capture the various biomass feedstocks and employment techniques for the generated bioenergy through various biomass conversion technologies.

Marine biome-derived secondary metabolites, a class of promising antineoplastic agents: A systematic review on their classification, mechanism of action and future perspectives.

Cancer is one of the most deadly diseases on the planet. Over the past decades, numerous antineoplastic compounds have been discovered from natural resources such as medicinal plants and marine species as part of multiple drug discovery initiatives. Notably, several marine flora (e.g. Ascophyllum nodosum, Sargassum thunbergii) have been identified as a rich source for novel cytotoxic compounds of different chemical forms. Despite the availability of enormous chemically enhanced new resources, the anticancer potential of marine flora and fauna has received little attention. Interestingly, numerous marine-derived secondary metabolites (e.g., Cytarabine, Trabectedin) have exhibited anticancer effects in preclinical cancer models. Most of the anticancer drugs obtained from marine sources stimulated apoptotic signal transduction pathways in cancer cells, such as the intrinsic and extrinsic pathways. This review highlights the sources of different cytotoxic secondary metabolites obtained from marine bacteria, algae, fungi, invertebrates, and vertebrates. Furthermore, this review provides a comprehensive overview of the utilisation of numerous marine-derived cytotoxic compounds as anticancer drugs, as well as their modes of action (e.g., molecular target). Finally, it also discusses the future prospects of marine-derived drug developments and their constraints.

Recent developments in biorefining of macroalgae metabolites and their industrial applications - A circular economy approach.

The macroalgal industry is expanding, and the quest for novel ingredients to improve and develop innovative products is crucial. Consumers are increasingly looking for natural-derived ingredients in cosmetic products that have been proven to be effective and safe. Macroalgae-derived compounds have growing popularity in skincare products as they are natural, abundant, biocompatible, and renewable. Due to their high biomass yields, rapid growth rates, and cultivation process, they are gaining widespread recognition as potentially sustainable resources better suited for biorefinery processes. This review demonstrates macroalgae metabolites and their industrial applications in moisturizers, anti-aging, skin whitening, hair, and oral care products. These chemicals can be obtained in combination with energy products to increase the value of macroalgae from an industrial perspective with a zero-waste approach by linking multiple refineries. The key challenges, bottlenecks, and future perspectives in the operation and outlook of macroalgal biorefineries were also discussed.

Propylsulfonic Acid-Functionalized Mesostructured Natural Rubber/Silica Nanocomposites as Promising Hydrophobic Solid Catalysts for Alkyl Levulinate Synthesis.

Organosulfonic acid-functionalized mesoporous silica is a class of heterogeneous acid catalysts used in esterification processes due to its high surface area, shape-selective properties, and strongly acidic sites. Since water is generated as a by-product of esterification, the surface of mesostructured silica is modified to enhance hydrophobicity and catalytic performance. In this study, a series of propylsulfonic acid-functionalized nanocomposites based on natural rubber and hexagonal mesoporous silica (NRHMS-SO3H) with different acidities were prepared via an in situ sol-gel process using tetraethyl orthosilicate as the silica source, dodecylamine as the nonionic templating agent, and (3-mercaptopropyl)trimethoxysilane as the acid-functional group precursor. Compared with conventional propylsulfonic acid-functionalized hexagonal mesoporous silica (HMS-SO3H), NRHMS-SO3H provided higher hydrophobicity, while retaining mesoporosity and high surface area. The catalytic activity of synthesized solid acids was then evaluated via batch esterification of levulinic acid (LA) with alcohols (ethanol, n-propanol, and n-butanol) to produce alkyl levulinate esters. NRHMS-SO3H exhibited higher catalytic activity than HMS-SO3H and ultra-stable Y (HUSY) zeolite owing to the synergistic effect between the strongly acidic-functional group and surface hydrophobicity. The activation energy of the reaction over the NRHMS-SO3H surface was lower than that of HUSY and HMS-SO3H, suggesting that tuning the hydrophobicity and acidity on a nanocomposite surface is a compelling strategy for energy reduction to promote catalysis.

Etherification of glycerol into short-chain polyglycerols over MgAl LDH/CaCO3 nanocomposites as heterogeneous catalysts to promote circular bioeconomy.

Glycerol is a byproduct from biodiesel production via conventional transesterification processes, representing approximately 10 wt% of the mass of biodiesel produced. Because of increasing biodiesel consumption, the volume of glycerol being produced has grown significantly, leading to a large surplus and, consequently, a dramatic drop in its market value. Thus, the valorization of glycerol into chemicals is a promising pathway toward sustainability in biodiesel industries. This study focused on upgrading biodiesel plant-derived glycerol into short-chain polyglycerols (PG), which are used as intermediates for producing emulsifiers in several consumer products, via catalytic etherification. To enhance environmental sustainability, solvent-free etherification of glycerol was performed over mixed oxides derived from magnesium-aluminum layered double hydroxides (MgAl LDH). For the first time, natural dolomite, a mixed calcium and magnesium carbonate (CaMg [CO3]2), was used as an Mg source in the preparation of MgAl LDH/CaCO3 nanocomposites via hydrothermal synthesis. The calcined MgAl LDH/CaCO3 nanocomposites were characterized by highly dispersed small crystallites of magnesium oxide. Their textural and acid-base properties were tuned by varying the Mg:Al molar ratio. The MgAl LDH/CaCO3 (an Mg:Al molar ratio of 1:1) calcined at 500 °C exhibited a superior catalytic performance to the MgAl LDH available commercially and the one synthesized by conventional co-precipitation. The nanocomposite catalyst displayed selectivity of >99% toward short-chain PG at 52.1 mol% glycerol conversion.

Recent advances in lignocellulosic biomass for biofuels and value-added bioproducts - A critical review.

Lignocellulosic biomass is a highly renewable, economical, and carbon-neutral feedstock containing sugar-rich moieties that can be processed to produce second-generation biofuels and bio-sourced compounds. However, due to their heterogeneous multi-scale structure, the lignocellulosic materials have major limitations to valorization and exhibit recalcitrance to saccharification or hydrolysis by enzymes. In this context, this review focuses on the latest methods available and state-of-the-art technologies in the pretreatment of lignocellulosic biomass, which aids the disintegration of the complex materials into monomeric units. In addition, this review deals with the genetic engineering techniques to develop advanced strategies for fermentation processes or microbial cell factories to generate desired products in native or modified hosts. Further, it also intends to bridge the gap in developing various economically feasible lignocellulosic products and chemicals using biorefining technologies.

Novel strategy in biohydrogen energy production from COVID - 19 plastic waste: A critical review.

Usage of plastics in the form of personal protective equipment, medical devices, and common packages has increased alarmingly during these pandemic times. Though they have served as an excellent protection source in minimizing the coronavirus disease (COVID-19) spreading, they have still emerged as major environmental pollutants nowadays. These non-degradable COVID-19 plastic wastes (CPW) were treated through incineration and landfilling process, which may lead to either the release of harmful gases or contaminating the surrounding environment. Further, they can cause numerous health hazards to the human and animal populations. These plastic wastes can be efficiently managed through thermochemical processes like pyrolysis or gasification, which assist in degrading the plastic waste and also effectively convert them into useful energy-yielding products. The pyrolysis process promotes the formation of liquid fuels and chemicals, whereas gasification leads to syngas and hydrogen fuel production. These energy-yielding products can help to compensate for the fossil fuels depletion in the near future. There are many insights explained in terms of the types of reactors and influential factors that can be adopted for the pyrolysis and gasification process, to produce high efficient energy products from the wastes. In addition, advanced technologies including co-gasification and two-stage gasification were also reviewed.

Ameliorative photocatalytic dye degradation of hydrothermally synthesized bimetallic Ag-Sn hybrid nanocomposite treated upon domestic wastewater under visible light irradiation.

Industrial and textile dyes are the major source of water pollutants in the Coimbatore Districts of Tamil Nadu, India. The highly stable organic dyes from these industries are being discharged untreated into neighboring rivers, lakes, and ponds. Thus, the present study mainly focused on the preparation of bimetallic nanocomposite (Ag-Sn) through Free-facile Teflon autoclave methodology and their subsequent stimulation has given to the photocatalyst by visible light irradiation. This visible light stimulates and irradiates the photocatalysts from steady state to the excited state and might help in absorption of the nanosized dye materials and organic matter. The nanocomposite was characterized using UV, FTIR, Zeta-sizer, XRD and FE-SEM. These parameters exhibited significant lattice structures with an average size of 127.6 nm. Further the nanocomposite treated samples were tested for water quality parameters like TDS, BOD, COD, heavy metals, sedimentation rate and bacterial population. Likewise, the samples irradiated with visible light for photocatalytic activity exhibited a significant intensity of C/C0 at 0.42 and 0.28. The treated water used for green gram seedling assay exhibited significant growth. Scavengers from Ag-Sn bimetallic nanocomposite plays the major role in dye degradation. The results clearly suggest that Ag-Sn bimetallic nanocomposite can be used for wastewater treatment and the subsequent treated water can be utilized for agriculture purposes.

Pyrolysis: An effective technique for degradation of COVID-19 medical wastes.

COVID-19 has led to the enormous rise of medical wastes throughout the world, and these have mainly been generated from hospitals, clinics, and other healthcare establishments. This creates an additional challenge in medical waste management, particularly in developing countries. Improper managing of medical waste may have serious public health issues and a significant impact on the environment. There are currently three disinfection technologies, namely incineration, chemical and physical processes, that are available to treat COVID-19 medical waste (CMW). This study focuses on thermochemical process, particularly pyrolysis process to treat the medical waste. Pyrolysis is a process that utilizes the thermal instability of organic components in medical waste to convert them into valuable products. Besides, the technique is environmentally friendly, more efficient and cost-effective, requires less landfill capacity, and causes lower pollution. The current pandemic situation generates a large amount of plastic medical wastes, which mainly consists of polyethylene, polypropylene, polystyrene, polyethylene terephthalate, and nylon. These plastic wastes can be converted into valuable energy products like oil, gas and char through pyrolysis process. This review provides detailed information about CMW handling, treatment, valuable product generation, and proper discharge into the open environment.

The COVID-19 pandemic face mask waste: A blooming threat to the marine environment.

Recently, the COVID-19 disease spread has emerged as a worldwide pandemic and cause severe threats to humanity. The World Health Organisation (WHO) releases guidelines to help the countries to reduce the spread of this virus to the public, like wearing masks, hand hygiene, social distancing, shutting down all types of public transports, etc. These conditions led to a worldwide economic fall drastically, and on the other hand, indirect environmental benefits like global air quality improvement and decreased water pollution are also pictured. Currently, use of face masks is part of a comprehensive package of the prevention and control measures that can limit the spread of COVID-19 since there is no clinically proven drugs or vaccine available for COVID-19. Mostly, face masks are made of petroleum-based non-renewable polymers that are non-biodegradable, hazardous to the environment and create health issues. This study demonstrates the extensive use of the face mask and how it affects human health and the marine ecosystem. It has become a great challenge for the government sectors to impose strict regulations for the proper disposal of the masks as medical waste by the public. Neglecting the seriousness of this issue may lead to the release of large tonnes of micro-plastics to the landfill as well as to the marine environment where mostly end-up and thereby affecting their fauna and flora population vastly. Besides, this study highlights the COVID-19 spread, its evolutionary importance, taxonomy, genomic structure, transmission to humans, prevention, and treatment.

Effect of COVID-19 virus on reducing GHG emission and increasing energy generated by renewable energy sources: A brief study in Malaysian context.

Coronavirus 2019 (COVID-19) has globally affected the human mortality rate and economic history of the modern world. According to the World Health Organization, COVID-19 has caused a severe threat to the health of the vulnerable groups, notably the elderly. There is still some disagreements regarding the source of the virus and its intermediate host. However, the spread of this disease has caused most countries to enforce strict curfew laws and close most industrial and recreational centres. This study aims to show the potential positive effects of COVID-19 on the environment and the increase of renewable energy generation in Malaysia. To prevent the spread of this disease, Malaysia enacted the Movement Control Order (MCO) law in March 2020. Implementation of this law led to a reduction in environmental pollution, especially air pollution, in this country. The greenhouse gases (GHG) emission , which was 8 Mt CO2 eq. from January 2020 to March 2020, reduced to <1 Mt CO2 eq. for April and May. The reduction of GHG emission and pollutant gases allowed more sunlight to reach photovoltaic panels, hence increasing the renewable energy generation.

Natural rubber as a renewable carbon source for mesoporous carbon/silica nanocomposites.

This study is the first report on the preparation of mesoporous carbon/silica (MCS) nanocomposites with tunable mesoporosity and hydrophobicity using natural rubber (NR) as a renewable and cheap carbon source. A series of mesoporous nanocomposites based on NR and hexagonal mesoporous silica (HMS) were prepared via an in situ sol-gel process and used as precursors; then, they were converted into MCS materials by controlled carbonization. The NR/HMS precursors exhibited a high dispersion of rubber phase incorporated into the mesostructured silica framework as confirmed by small-angle X-ray scattering and high-resolution transmission electron microscopy. An increase in the carbonization temperature up to 700 °C resulted in MCS nanocomposites with a well-ordered mesostructure and uniform framework-confined wormhole-like channels. The NR/HMS nanocomposites possessed high specific surface area (500-675 m2 g-1) and large pore volume (1.14-1.44 cm3 g-1). The carbon content of MCS (3.0-16.1 wt%) was increased with an increase in the H2SO4 concentration. Raman spectroscopy and X-ray photoelectron spectroscopy revealed the high dispersion of graphene oxide-like carbonaceous moieties in MCS materials; the type and amount of oxygen-containing groups in obtained MCS materials were determined by H2SO4 concentration. The enhanced hydrophobicity of MCS nanocomposites was related to the carbon content and the depletion of surface silanol groups, as confirmed by the water sorption measurement. The study on the controlled release of diclofenac in simulated gastrointestinal environment suggests a potential application of MCS materials as drug carriers.

Mesoporous Acidic Catalysts Synthesis from Dual-Stage and Rising Co-Current Gasification Char: Application for FAME Production from Waste Cooking Oil.

The main purpose of this work is to investigate the application options of the char produced from gasification plants. Two promising mesoporous acidic catalysts were synthesized using char as a support material. Two char samples were collected from either a dual-stage or a rising co-current biomass gasification plant. The catalysts produced from both gasification char samples were characterized for their physiochemical and morphological properties using N2 physorption measurement, total acidity evaluation through TPD-NH3, functional groups analysis by FT-IR, and morphology determination via FESEM. Results revealed that the dual-stage char-derived mesoporous catalyst (DSC-SO4) with higher specific surface area and acidic properties provided higher catalytic activity for fatty acid methyl esters (FAME) production from waste cooking oil (WCO) than the mesoporous catalyst obtained from char produced by rising co-current gasification (RCC-SO4). Furthermore, the effects of methanol/oil molar ratio (3:1-15:1), catalyst concentration (1-5 wt.% of oil), and reaction time (30-150 min) were studied while keeping the transesterification temperature constant at 65 °C. The optimal reaction conditions for the transesterification of WCO were 4 wt.% catalyst concentration, 12:1 methanol/oil molar ratio, and 90 min operating time. The optimized reaction conditions resulted in FAME conversions of 97% and 83% over DSC-SO4 and RCC-SO4 catalysts, respectively. The char-based catalysts show excellent reusability, since they could be reused six times without any modification.

Synthesis of bifunctional nanocatalyst from waste palm kernel shell and its application for biodiesel production.

The potential of bifunctional nanocatalysts obtained from waste palm kernel shell (PKS) was investigated for one-step transesterification-esterification under mild conditions. State-of-the-art characterization illustrated that the synthesized catalyst has high stability through the thermal test, high BET surface area of 438.08 m2 g-1, pore volume of 0.367 cm3 g-1 and pore width of 3.8 nm. The high amount of basicity (8.866 mmol g-1) and acidity (27.016 mmol g-1) promoted the successfulness of simultaneous transesterification-esterification. The investigation revealed that the combination of potassium and copper on activated carbon surface showed good catalytic activity by giving 95.0% FAME yield and 97.3% FFA conversion at a relatively mild condition of 5 wt% catalyst loading, 12 : 1 methanol to oil molar ratio at 80 °C for 4 hours with FAME yield > 80% after 5 reaction cycles. Characterization of the spent catalyst showed that the amount of basicity was reduced to 3.106 mmol g-1, which validated the reduction of the catalytic performance. The usage of waste material was successfully discovered in producing an effective bifunctional catalyst for biodiesel production from waste cooking oil (WCO) and has high potential for commercialization in the future.

Facile fabrication of mesostructured natural rubber/silica nanocomposites with enhanced thermal stability and hydrophobicity.

Natural rubber (NR)/hexagonal mesoporous silica (HMS) nanocomposites (NRHMS) with enhanced thermal and hydrophobic properties were facilely prepared via in situ sol-gel formation with pH adjustment using a low sulphuric acid (H2SO4) acid concentration. The effect of the amount of 0.5 M H2SO4 (2.5-10 g) added into the pre-synthesis mixture on the physicochemical properties of the obtained NRHMS nanocomposites was investigated. With a small addition of H2SO4 solution, the fabricated NRHMS nanocomposite possessed an improved wormhole-like mesostructure arrangement with a thicker silica wall, which retarded the thermal decomposition of the NR phase, as deduced from the auto-oxidation of NR by thermogravimetric analysis. The H2O adsorption-desorption measurement revealed an increased hydrophobicity of the NRHMS composites, explained by the acid-catalyzed bridging of free silanol groups to siloxane bonds, which was supported by the X-ray photoelectron spectroscopy analysis. Scanning transmission electron microscopy with energy dispersive X-ray spectroscopy elemental mapping revealed a good dispersion of the NR phase within the mesostructured silica. However, a high amount of added H2SO4 solution led to silica-NR phase separation due to the decreased hydrophobic interaction between the silica precursor and rubber chain, as well as an agglomeration of the NR phase itself. The mechanism of NRHMS nanocomposite formation under pH-controlled conditions was proposed to proceed via a cooperative self-assembly route.

Adsorption of single and mixed haloacetonitriles on silica-based porous materials: Mechanisms and effects of porous structures.

Adsorption mechanisms and the role of different porous and crystalline structures on the removal of five haloacetonitriles (HANs) over hexagonal mesoporous silica (HMS), titanium substituted mesoporous silica (Ti-HMS), rod-shaped SBA-15 and microporous zeolite NaY were investigated. In addition, the effect of pH on adsorption mechanism and selective adsorption of five HANs individually and in an equimolar mixed solution were evaluated. The results indicated that the intraparticle diffusion rate constants of the mesoporous adsorbents were higher than that of the microporous NaY. In single solute, the order of adsorption preference (highest to lowest) was mono-HANs > di-HANs > tri-HAN. However, in mixed solute, the large molecular weight of the tri-HAN and di-HANs are more easily adsorbed than the smaller molecular weight mono-HANs. Except for SBA-15, the order of adsorption capacities in mixed HANs solute was not different compared to that observed for the single HAN solute, which might be caused by the higher accessibility to the active sites due to larger pore size. The ion-dipole electrostatic interaction was likely to be the main adsorption mechanism, and was favored at high pH values due to the high negative surface charge density of the adsorbent. The molecular structure of the HANs and hydrophilic/hydrophobic nature affected the adsorption capacities and their selective adsorption from mixed solutes.

Selective adsorption mechanisms of antilipidemic and non-steroidal anti-inflammatory drug residues on functionalized silica-based porous materials in a mixed solute.

The selective adsorption mechanisms of naproxen (NAP), acetaminophen (ACT), and clofibric acid (CFA) on silica-based porous materials were examined by single and mixed-batch adsorption. Effects of the types and densities of surface functional groups on adsorption capacities were determined, including the role of hydrophobic and hydrophilic dissolved organic matters (DOMs). Hexagonal mesoporous silica (HMS), superparamagnetic HMS (HMS-SP) and SBA-15 were functionalized and applied as adsorbents. Compared with powdered activated carbon (PAC), amine-functionalized HMS had a better adsorption capacity for CFA, but PAC possessed a higher adsorption capacity for the other pharmaceuticals than HMS and its two derivatives. In contrast to PAC, the adsorption capacity of the mesoporous silicas varied with the solution pH, being highest at pH 5. Electrostatic interactions and hydrogen bonding were found to be the main mechanisms. Increase in grafted amine group density on silica surfaces can enhance the CFA adsorption capacity. Further, hydrophilic DOM can decrease CFA adsorption capacities on amino-grafted adsorbents by adsorption site competition, while hydrophobic DOM can interfere with CFA adsorption by the interaction between hydrophobic DOM and CFA. Finally, in a competitive adsorption study, the adsorption capacity of hydrophilic adsorbents for acidic pharmaceuticals varied with their pKa values.