RESUMO
Deuterium labelling of the non-labile protium atoms in starch granules has been achieved for the first time, by growing genetically modified yeast on deuterated media. Mass spectrometry of the glucose monomers from digested starch showed 44 % average deuteration of the non-labile protium when grown on partially deuterated raffinose (with average deuteration 48 %); yielding starch with 26 % average overall deuteration. Non-labile deuteration was also demonstrated using D2O solvent in the culture medium. Solid-state NMR revealed that deuteration was not evenly distributed across the monomer, being highest at the C6 carbon and lowest at the C1 carbon. SANS revealed two structural features at q = 0.05 Å-1 and 0.4 Å-1, the first corresponding to a lamellar repeat of approximately 12-13 nm while the latter is consistent with B-type crystalline polymer packing. Furthermore, solvent contrast variation SANS analysis yielded a contrast match point of 66 mol% D2O indicative of approximately 30-35 % average deuteration of the bulk granules, consistent with mass spectroscopy. When coupled with the more traditional process of exchange of labile protium in the hydroxyl groups by D2O solvent exchange, the biosynthesis of highly deuterated starch opens new opportunities for neutron scattering experiments involving multicomponent starch-based systems.
Assuntos
Deutério , Amido , Amido/química , Amido/metabolismo , Amido/biossíntese , Deutério/química , Saccharomyces cerevisiae/metabolismo , Espectroscopia de Ressonância Magnética , Espectrometria de Massas , Rafinose/química , Rafinose/metabolismoRESUMO
Solid-state electrochemical energy systems have attracted numerous attentions for their excellent performance, high safety, and low cost. Recently, ice of aqueous electrolytes is reported as a new kind solid-state electrolyte for low-temperature solid-state devices. However, the lack of kinetically favorable electrodes hampers the performance of this new class of icy electrolyte-based solid-state devices at sub-zero temperatures. In this work, a hydrated layered polyaniline cathode active material (h-LPANi) with nanoconfined supercooled water by metatungstate clusters is utilized to improve the performance of sub-zero solid-state zinc ion hybrid capacitors (ZIHCs). The interlayer confined hydrated network of h-LPANi improves kinetics, surpassing pristine polyaniline and conventional porous carbon-based active materials. At -15 °C, the solid-state iced ZIHCs with h-LPANi cathode demonstrate an areal energy density of 580.0 µWh cm-2 at 1.1 mW cm-2 and 155.7 µWh cm-2 at 43.3 mW cm-2, surpassing other low-temperature solid-state ZIHCs with conventional cathodes.
RESUMO
We present a novel study introducing a durable and robust covalent-organic framework (COF) nanocoating, developed in situ on living cells. This COF nanocoating demonstrates remarkable resistance against a diverse range of lethal stressors, including high temperature, extreme pH, ultraviolet radiation, toxic metal ions, organic pollutants, and strong oxidative stress. Notably, the nanocoating exhibits exceptional cell survival enhancement under high temperature and strongly acidic conditions, an aspect yet unexplored in the case of metal-organic framework nanocoatings and other nanomaterials. Moreover, functionalization of the nanocoating with an exogenous enzyme catalase enables yeast fermentation and ethanol production even under strong oxidative stress. Our findings establish the durable and robust COF nanocoating as a reliable platform for safeguarding vulnerable microorganisms to allow their utilisation in a wide range of adverse environments.
RESUMO
The production of aluminum (Al) metal-organic frameworks (MOFs) by electrosynthesis using solid-state Al electrodes always faces significant challenges due to the formation of a passivating aluminum oxide layer in the process. Here, we developed a liquid-metal-based method to electrosynthesize an aluminum Al-MOF (MIL-53). This method uses a liquid-state gallium (Ga) anode as a reservoir and activator for a light metal, Al, in the form of Al-Ga alloys that releases Al3+ for the electrosynthesis of Al-MOFs. Introducing Ga into the system inhibits the formation of aluminum oxide passivation layer and promotes the electrochemical reaction for Al-MOF synthesis. The electrosynthesis using liquid Al-Ga alloy is conducted at ambient temperatures for long durations without requiring pretreatment for aluminum oxide removal. We show that the Al-MOF products synthesized from 0.40 wt % Al in liquid Ga lead to the highest crystallinity and possess a specific surface area greater than 800 m2 g-1 and a low capacity for CO2 adsorption that can be used as a potential matrix for CO2/N2 separation. This work provides evidence that employing liquid-metal electrodes offers a viable pathway to circumvent surface passivation effects that inevitably occur when using conventional solid metals. It also introduces an efficient electrosynthesis method based on liquid metals for producing atomically porous materials.
RESUMO
Delamanid (DLM) is a hydrophobic small molecule therapeutic used to treat drug-resistant tuberculosis (DR-TB). Due to its hydrophobicity and resulting poor aqueous solubility, formulation strategies such as amorphous solid dispersions (ASDs) have been investigated to enhance its aqueous dissolution kinetics and thereby improve oral bioavailability. However, ASD formulations are susceptible to temperature- and humidity-induced phase separation and recrystallization under harsh storage conditions typically encountered in areas with high tuberculosis incidence. Nanoencapsulation represents an alternative formulation strategy to increase aqueous dissolution kinetics while remaining stable at elevated temperature and humidity. The stabilizer layer coating the nanoparticle drug core limits the formation of large drug domains by diffusion during storage, representing an advantage over ASDs. Initial attempts to form DLM-loaded nanoparticles via precipitation-driven self-assembly were unsuccessful, as the trifluoromethyl and nitro functional groups present on DLM were thought to interfere with surface stabilizer attachment. Therefore, in this work, we investigated the nanoencapsulation of DLM via emulsification, avoiding the formation of a solid drug core and instead keeping DLM dissolved in a dichloromethane dispersed phase during nanoparticle formation. Initial emulsion formulation screening by probe-tip ultrasonication revealed that a 1:1 mass ratio of lecithin and HPMC stabilizers formed 250 nm size-stable emulsion droplets with 40% DLM loading. Scale-up studies were performed to produce nearly identical droplet size distribution at larger scale using high-pressure homogenization, a continuous and industrially scalable technique. The resulting emulsions were spray-dried to form a dried powder, and in vitro dissolution studies showed dramatically enhanced dissolution kinetics compared to both as-received crystalline DLM and micronized crystalline DLM, owing to the increased specific surface area and partially amorphous character of the DLM-loaded nanoparticles. Solid-state NMR and dissolution studies showed good physical stability of the emulsion powders during accelerated stability testing (50 °C/75% RH, open vial).
Assuntos
Nanopartículas , Tuberculose Bucal , Humanos , Emulsões , Nanopartículas/química , Solubilidade , Excipientes/química , Água/química , Tamanho da PartículaRESUMO
Selecting a suitable support material for enzyme immobilization with excellent biocatalytic activity and stability is a critical aspect in the development of functional biosystems. The highly stable and metal-free properties of covalent-organic frameworks (COFs) make them ideal supports for enzyme immobilization. Herein, we constructed three kinds of COFs via a biofriendly and one-pot synthetic strategy at room temperature in aqueous solution. Among the three developed COFs (COF-LZU1, RT-COF-1 and ACOF-1), the horseradish peroxidase (HRP)-incorporated COF-LZU1 is found to retain the highest activity. Structural analysis reveals that a weakest interaction between the hydrated enzyme and COF-LZU1, an easiest accessibility by the COF-LZU1 to the substrate, as well as an optimal conformation of enzyme together promote the bioactivity of HRP-COF-LZU1. Furthermore, the COF-LZU1 is revealed to be a versatile nanoplatform for encapsulating multiple enzymes. The COF-LZU1 also offers superior protection for the immobilized enzymes under harsh conditions and during recycling. The comprehensive understanding of interfacial interactions of COF host and enzyme guest, the substrate diffusion, as well as the enzyme conformation alteration within COF matrices represents an opportunity to design the ideal biocatalysts and opens a broad range of applications of these nanosystems.
Assuntos
Enzimas Imobilizadas , Estruturas Metalorgânicas , Biocatálise , Difusão , Peroxidase do Rábano SilvestreRESUMO
Silk from silkworms and spiders is an exceptionally important natural material, inspiring a range of new products and applications due to its high strength, elasticity, and toughness at low density, as well as its unique conductive and optical properties. Transgenic and recombinant technologies offer great promise for the scaled-up production of new silkworm- and spider-silk-inspired fibres. However, despite considerable effort, producing an artificial silk that recaptures the physico-chemical properties of naturally spun silk has thus far proven elusive. The mechanical, biochemical, and other properties of pre-and post-development fibres accordingly should be determined across scales and structural hierarchies whenever feasible. We have herein reviewed and made recommendations on some of those practices for measuring the bulk fibre properties; skin-core structures; and the primary, secondary, and tertiary structures of silk proteins and the properties of dopes and their proteins. We thereupon examine emerging methodologies and make assessments on how they might be utilized to realize the goal of developing high quality bio-inspired fibres.
Assuntos
Bombyx , Fibroínas , Aranhas , Animais , Animais Geneticamente Modificados , Elasticidade , Aranhas/química , Fibroínas/químicaRESUMO
Currently, synthetic fibre production focuses primarily on high performance materials. For high performance fibrous materials, such as silks, this involves interpreting the structure-function relationship and downsizing to a smaller scale to then harness those properties within synthetic products. Spiders create an array of fibres that range in size from the micrometre to nanometre scale. At about 20 nm diameter spider cribellate silk, the smallest of these silks, is too small to contain any of the typical secondary protein structures of other spider silks, let alone a hierarchical skin-core-type structure. Here, we performed a multitude of investigations to elucidate the structure of cribellate spider silk. These confirmed our hypothesis that, unlike all other types of spider silk, it has a disordered molecular structure. Alanine and glycine, the two amino acids predominantly found in other spider silks, were much less abundant and did not form the usual α-helices and ß-sheet secondary structural arrangements. Correspondingly, we characterized the cribellate silk nanofibre to be very compliant. This characterization matches its function as a dry adhesive within the capture threads of cribellate spiders. Our results imply that at extremely small scales there may be a limit reached below which a silk will lose its structural, but not functional, integrity. Nano-sized fibres, such as cribellate silk, thus offer a new opportunity for inspiring the creation of novel scaled-down functional adhesives and nano meta-materials.
Assuntos
Nanofibras , Aranhas , Animais , Seda/química , AdesivosRESUMO
Enhancing the enzymatic activity inside metal-organic frameworks (MOFs) is a critical challenge in chemical technology and bio-technology, which, if addressed, will broaden their scope in energy, food, environmental, and pharmaceutical industries. Here, we report a simple yet versatile and effective strategy to optimize biocatalytic activity by using MOFs to rapidly "lock" the ultrasound (US)-activated but more fragile conformation of metalloenzymes. The results demonstrate that up to 5.3-fold and 9.3-fold biocatalytic activity enhancement of the free and MOF-immobilized enzymes could be achieved compared to those without US pretreatment, respectively. Using horseradish peroxidase as a model, molecular dynamics simulation demonstrates that the improved activity of the enzyme is driven by an opened gate conformation of the heme active site, which allows more efficient substrate binding to the enzyme. The intact heme active site is confirmed by solid-state UV-vis and electron paramagnetic resonance, while the US-induced enzyme conformation change is confirmed by circular dichroism spectroscopy and Fourier-transform infrared spectroscopy. In addition, the improved activity of the biocomposites does not compromise their stability upon heating or exposure to organic solvent and a digestion cocktail. This rapid locking and immobilization strategy of the US-induced active enzyme conformation in MOFs gives rise to new possibilities for the exploitation of highly efficient biocatalysts for diverse applications.
Assuntos
Estruturas Metalorgânicas , Metaloproteínas , Enzimas Imobilizadas/química , Heme , Peroxidase do Rábano Silvestre , Estruturas Metalorgânicas/química , SolventesRESUMO
Proton electrochemistry is promising for developing post-lithium energy storage devices with high capacity and rate capability. However, some electrode materials are vulnerable because of the co-intercalation of free water molecules in traditional acid electrolytes, resulting in rapid capacity fading. Here, the authors report a molecular crowding electrolyte with the usage of poly(ethylene glycol) (PEG) as a crowding agent, achieving fast and stable electrochemical proton storage and expanded working potential window (3.2 V). Spectroscopic characterisations reveal the formation of hydrogen bonds between water and PEG molecules, which is beneficial for confining the activity of water molecules. Molecular dynamics simulations confirm a significant decrease of free water fraction in the molecular crowding electrolyte. Dynamic structural evolution of the MoO3 anode is studied by in-situ synchrotron X-ray diffraction (XRD), revealing a reversible multi-step naked proton (de)intercalation mechanism. Surficial adsorption of PEG molecules on MoO3 anode works in synergy to alleviate the destructive effect of concurrent water desolvation, thereby achieving enhanced cycling stability. This strategy offers possibilities of practical applications of proton electrochemistry thanks to the low-cost and eco-friendly nature of PEG additives.
Assuntos
Fontes de Energia Elétrica , Prótons , Eletrólitos/química , Lítio/química , ÁguaRESUMO
Rechargeable aqueous proton batteries are promising competitors for the next generation of energy storage systems with the fast diffusion kinetics and wide availability of protons. However, poor cycling stability is a big challenge for proton batteries due to the attachment of water molecules to the electrode surface in acid electrolytes. Here, a hydrogen-bond disrupting electrolyte strategy to boost proton battery stability via simultaneously tuning the hydronium ion solvation sheath in the electrolyte and the electrode interface is reported. By mixing cryoprotectants such as glycerol with acids, hydrogen bonds involving water molecules are disrupted leading to a modified hydronium ion solvation sheaths and minimized water activity. Concomitantly, glycerol absorbs on the electrode surface and acts to protect the electrode surface from water. Fast and stable proton storage with high rate capability and long cycle life is thus achieved, even at temperatures as low as -50 °C. This electrolyte strategy may be universal and is likely to pave the way toward highly stable aqueous energy storage systems.
Assuntos
Glicerol , Prótons , Eletrólitos/química , Ligação de Hidrogênio , Água/químicaRESUMO
Silk is a unique fiber, having a strength and toughness that exceeds other natural fibers. While inroads have been made in our understanding of silkworm silk structure and function, few studies have measured structure and function at nanoscales. As a consequence, the sources of variation in mechanical properties along single silk fibers remain unresolved at multiple scales. Here we utilized state of the art spectroscopic and microscopic methodologies to show that the silks of species of wild and domesticated silkworms vary in mechanical properties along a single fiber and, what is more, this variation correlates with nanoscale void formations. These results can also explain the strain hardening behaviours observed in the silks where structural features of the proteins could not. We thereupon devised a predictive thermal model and showed that the voids contribute to temperature regulation within the silkworm cocoons.
Assuntos
Bombyx , Seda , Animais , Bombyx/química , Seda/químicaRESUMO
Continual application of nitrogen (N), phosphorous (P) and potassium (K) fertilizer may not return a profit to farmers due to the costs of application and the loss of NPK from soil in various ways. Thus, a combination of NPK granule with a porous biochar (termed here as BNPK) appears to offer multiple benefits resulting from the excellent properties of biochar. Given the lack of information on the properties of NPK and BNPK fertilizers, it is necessary to investigate the characteristics of both to achieve a good understanding of why BNPK granule is superior to NPK granule. Therefore, this study aims to investigate the characteristics of a maize straw biochar mixed with NPK granule, before and after application to soil, and compare them to those for a commercial NPK granule. The BNPK granule, with a greater surface area and porosity, showed a higher capacity to store and donate electrons than the NPK granule. Relatively lower concentrations of Ca, P, K, Si and Mg were dissolved from the BNPK, indicating the ability of the BNPK granule to maintain these mineral elements and reduce dissolution rate. To study the nutrient storage mechanism of the BNPK granule in the soil, short- and long-term leaching experiments were conducted. During the experiments, organo-mineral clusters, comprising C, P, K, Si, Al and Fe, were formed on the surface and inside the biochar pores. However, BNPK was not effective in reducing N leaching, in the absence of plants, in a red chromosol soil.
Assuntos
Carvão Vegetal , Solo , Fertilizantes/análise , Nitrogênio/análiseRESUMO
Porous electrodes with extraordinary capacitances in liquid electrolytes are oftentimes incompetent when gel electrolyte is applied because of the escalating ion diffusion limitations brought by the difficulties of infilling the pores of electrode with gels. As a result, porous electrodes usually exhibit lower capacitance in gel electrolytes than that in liquid electrolytes. Benefiting from the swift ion transport in intrinsic hydrated nanochannels, the electrochemical capacitance of the nanofluidic voidless electrode (5.56% porosity) is nearly equal in gel and liquid electrolytes with a difference of ~1.8%. In gel electrolyte, the areal capacitance reaches 8.94 F cm-2 with a gravimetric capacitance of 178.8 F g-1 and a volumetric capacitance of 321.8 F cm-3. The findings are valuable to solid-state electrochemical energy storage technologies that require high-efficiency charge transport.
RESUMO
Copolymeric organo-sulfur based electrodes provide a unique framework to explore and subsequently improve lithium-sulfur (Li-S) cells. There is a general difference in the way copolymers trap lithium during cell function compared to inorganic carbon-sulfur composites. Using a chain-like polyterpene copolymeric architecture involving the copolymerization of squalene monomer with sulfur (poly(S-r-squalene)), the first evidence for distinguishable differences in the entrapment of lithiated species, when using different copolymeric architectures, is provided. Investigation of poly(S-r-squalene) as an active cathode material via X-ray Absorption Near-Edge Structure (XANES) spectroscopy and high-resolution solid-state Nuclear Magnetic Resonance (NMR) reveal notable differences compared to previously studied poly(S-r-DIB) (proposed to have a less branched architecture) between the lithium environments present during electrochemistry that can be directly linked to the copolymeric structural features. Subtle but pertinent effects based on the copolymeric architecture related to the solid-electrolyte interphase (SEI) formed from the electrolytic components are also uncovered through these techniques. This work offers a comprehensive study on poly(S-r-squalene) and reveals that foundational inverse vulcanisation conditions such as choice of crosslinking monomer can dramatically impact lithium transport and SEI formation for the copolymeric electrode.
RESUMO
Investigation of highly oxidized graphene oxide (GO) by solid-state nuclear magnetic resonance (NMR) spectroscopy has revealed an exceptional level of hitherto undiscovered structural complexity. A number of chemical moieties were observed for the first time, such as terminal esters, furanic carbons, phenolic carbons, and three distinct aromatic and two distinct alkoxy carbon moieties. Quantitative one-dimensional (1D) and two-dimensional (2D) 13C{1H} NMR spectroscopy established the relative populations and connectivity of these different moieties to provide a consistent "local" chemical structure model. An inferred 2 nm GO sheet size from a very large (â¼20%) edge carbon fraction by NMR analysis is at odds with the >20 nm sheet size determined from microscopy and dynamic light scattering. A proposed kirigami model where extensive internal cuts/tears in the basal plane provide the necessary edge sites is presented as a resolution to these divergent results. We expect this work to expand the fundamental understanding of this complex material and enable greater control of the GO structure.
RESUMO
The mechanistic effects of long-term γ irradiation on the mineralogical, microstructural, structural, physical, and chemical properties of 40â¯wt% blast furnace slag + 60â¯wt% fly ash geopolymer pastes have been examined. Ambient curing for 28 days during normal equilibration was followed by exposure to 60Co irradiation (1574, 4822, 10,214â¯kGy). The material characteristics are controlled largely through the competing mechanisms of beneficial equilibration at initial lower dosages, which enhances gelation and crosslinking, and detrimental equilibration at subsequent higher dosages, which causes structural and microstructural destabilisation. Irradiation for 2 months (1574â¯kGy) increases the compressive strength ~45% (~57 to ~83â¯MPa) through conversion of less-crosslinked (Q0/Q1/Q1') to more-crosslinked (Q2/Q3/Q4) silicate species. The transition between these regimes occurs after ~5 months of irradiation (~4000â¯kGy). Beyond this, the rates of beneficial equilibration and detrimental equilibration equalise upon completion of normal geopolymerisation. Additional geopolymerisation from γ irradiation is controlled by the rate-limiting release of Si4+ from the unreacted aluminosilicates and silicates and their rapid incorporation in the geopolymer network. The aqueous leaching of the geopolymer pastes is not affected significantly by γ irradiation. These data reveal the potential for these materials as intermediate-level wasteforms that can outperform Portland cement-based materials.
RESUMO
Metal-organic frameworks (MOFs) have recently emerged as excellent hosting matrices for enzyme immobilization, offering superior physical and chemical protection for biocatalytic reactions. However, for multienzyme and cofactor-dependent biocatalysis, the subtle orchestration of enzymes and cofactors is largely disrupted upon immobilizing in the rigid crystalline MOF network, which leads to a much reduced biocatalytic efficiency. Herein, we constructed hierarchically porous MOFs by controlled structural etching to enhance multienzyme and cofactor-dependent enzyme biocatalysis. The expanded size of the pores can provide sufficient space for accommodated enzymes to reorientate and spread within MOFs in their lower surface energy state as well as to decrease the inherent barriers to accelerate the diffusion rate of reactants and intermediates. Moreover, the developed hierarchically porous MOFs demonstrated outstanding tolerance to inhospitable surroundings and recyclability.
Assuntos
Biocatálise/efeitos dos fármacos , Enzimas Imobilizadas/química , Estruturas Metalorgânicas/química , Armoracia/enzimologia , Glucose/química , NAD/química , Oxirredução , Fenazinas/síntese química , Fenilenodiaminas/química , PorosidadeRESUMO
Nanostructured LiMnO2 integrated with Li3PO4 was successfully synthesized by the mechanical milling route and examined as a new series of positive electrode materials for rechargeable lithium batteries. Although uniform mixing at the atomic scale between LiMnO2 and Li3PO4 was not anticipated because of the noncompatibility of crystal structures for both phases, our study reveals that phosphorus ions with excess lithium ions dissolve into nanosize crystalline LiMnO2 as first evidenced by elemental mapping using STEM-EELS combined with total X-ray scattering, solid-state NMR spectroscopy, and a theoretical ab initio study. The integrated phase features a low-crystallinity metastable phase with a unique nanostructure; the phosphorus ion located at the tetrahedral site shares faces with adjacent lithium ions at slightly distorted octahedral sites. This phase delivers a large reversible capacity of â¼320 mA h g-1 as a high-energy positive electrode material in Li cells. The large reversible capacity originated from the contribution from the anionic redox of oxygen coupled with the cationic redox of Mn ions, as evidenced by operando soft XAS spectroscopy, and the superior reversibility of the anionic redox and the suppression of oxygen loss were also found by online electrochemical mass spectroscopy. The improved reversibility of the anionic redox originates from the presence of phosphorus ions associated with the suppression of oxygen dimerization, as supported by a theoretical study. From these results, the mechanistic foundations of nanostructured high-capacity positive electrode materials were established, and further chemical and physical optimization may lead to the development of next-generation electrochemical devices.
RESUMO
Chirality is a key aspect of amino acids and is essential for life. Here, a chiral metal-organic framework, S-Mg2dobpdc, is used to determine the chirality of three BOC protected amino acids (alanine, valine and proline) by 13C solid-state NMR with chemical shift differences of up to 1.3 ppm observed between enantiomers. The chiral sensitivity persists upon in situ deprotection of the amino acids by thermolysis of the BOC group.