RESUMO
BACKGROUND: The aim of this study was to investigate the clinical course and to redefine an optimized algorithm for OE cases until epithetic restoration. METHODS: Indication, defect type according to Kesting, reconstructive technique, incidence of postoperative complications and peri-implantitis, patients' quality of life, timing of periorbital implant insertion, incidence of and interval to implant loss, and time until epithetic restoration were analyzed in 43 patients. RESULTS: A significant correlation was detected between wound dehiscence and defect type. Out of 24 patients, 7 were implanted secondarily with a median time interval of 399 days (270-2015) after OE. Eleven out of 83 placed implants were lost in 8 patients with a median time interval of 586 days (264-4485) after insertion. The majority of epithesis carriers had no or few restrictions in their quality of life. CONCLUSIONS: We recommend our modified treatment algorithm to further improve and shorten the clinical course.
Assuntos
Implantes Dentários , Procedimentos de Cirurgia Plástica , Humanos , Estudos Transversais , Qualidade de Vida , Exenteração Orbitária , Progressão da DoençaRESUMO
Most odontogenic and intraoral abscesses can be treated on an outpatient basis with local anesthesia. However, severe disease progression may require an incision under general anesthesia (GA) with postoperative inpatient treatment. This study aimed to evaluate the first "COVID-19 year" in Germany and compare the first "COVID-19 year" with the two previous years. All consecutive cases with odontogenic or intraoral abscesses treated in an outpatient or inpatient setting between 2018 and 2021 were included in this study. Data were collected, including the type of anesthesia, length of hospital stay, and healthcare costs. Despite the lower total number of abscess treatments in the first year of COVID-19 (n = 298 patients) than that in the two previous years (n = 663 patients), the number of advanced abscesses requiring intervention under GA was significantly higher (p < 0.001). This increased burden of care was also reflected in increased healthcare costs. The measures taken against the COVID-19 pandemic had an impact on the course of other diseases, for example, odontogenic and intraoral abscesses. The results showed an emerging conflict in patient care during the pandemic crisis that should be considered in possible future pandemics.
Assuntos
Abscesso , COVID-19 , Pandemias , Humanos , Abscesso/epidemiologia , Abscesso/cirurgia , Alemanha/epidemiologia , Tempo de Internação , Quarentena , Abscesso Periapical , Abscesso Periodontal , Tumores OdontogênicosRESUMO
BACKGROUND: The behavior of blood flow changes within free flaps following microvascular anastomosis is not well described in the literature. The aim of this study was to determine the immediate blood flow behavior of different free flaps as reference values for various clinical applications. METHODS: Intraoperative transit-time flow measurements were performed on patients receiving free flap transfer in the head and neck area comprising radial forearm flaps (RFF), peroneal artery perforator flaps (PAP), anterolateral thigh flaps (ALT), vastus lateralis flaps (VLF), parascapular flaps (PSF), latissimus dorsi flaps (LDF), fibula free flaps (FFF), deep circumflex iliac artery flaps (DCIA), and scapular flaps (SF). In accordance with a structured protocol, measurements took place at the pedicle directly before flap harvesting and at the recipient vessels 1 h after flap transfer. Heart rate, transplant weight, and other patient characteristics were recorded and analyzed. RESULTS: A total of 129 were enrolled, comprising 66 RFF, 8 ALT, 6 PAP, 11 VLF, 3 PSF, 2 LDF, 24 FFF, 7 DCIA, and 2 SF. In most of the transplant groups, arterial perfusion increased after anastomosis at the recipient site. The arterial pulsatility index developed indirectly proportionally to arterial blood flow, whereas venous blood drainage did not show any statistically significant changes. Muscle flaps had the highest arterial perfusion before flap transfer. Composite transplants with hard and soft tissue presented the greatest increase in arterial perfusion. The lowest arterial blood flow after anastomosis was measured in PAP and RFF. In contrast, RFF and PAP presented the highest arterial perfusion per 100 g transplant weight. CONCLUSIONS: Arterial perfusion changed, whereas venous blood flow did not show any statistically significant variations in any transplant group. Perfusion of free flaps does not only depend on the recipient vessel and the recipient bed, but also on flap-specific anatomy and physiology.
Assuntos
Retalhos de Tecido Biológico , Procedimentos de Cirurgia Plástica , Humanos , Retalhos de Tecido Biológico/irrigação sanguínea , Estudos Prospectivos , Pescoço/cirurgia , Cabeça/cirurgiaRESUMO
BACKGROUND: Mandibular reconstruction is conventionally performed freehand, CAD/CAM-assisted, or by using partially adjustable resection aids. CAD/CAM-assisted reconstructions are usually done in cooperation with osteosynthesis manufacturers, which entails additional costs and longer lead time. The purpose of this study is to analyze an in-house, open-source software-based solution for virtual planning. METHODS AND MATERIALS: All consecutive cases between January 2019 and April 2021 that underwent in-house, software-based (Blender) mandibular reconstruction with a free fibula flap (FFF) were included in this cross-sectional study. The pre- and postoperative Digital Imaging and Com munications in Medicine (DICOM) data were converted to standard tessellation language (STL) files. In addition to documenting general information (sex, age, indication for surgery, extent of resection, number of segments, duration of surgery, and ischemia time), conventional measurements and three-dimensional analysis methods (root mean square error [RMSE], mean surface distance [MSD], and Hausdorff distance [HD]) were used. RESULTS: Twenty consecutive cases were enrolled. Three-dimensional analysis of preoperative and virtually planned neomandibula models was associated with a median RMSE of 1.4 (0.4-7.2), MSD of 0.3 (-0.1-2.9), and HD of 0.7 (0.1-3.1). Three-dimensional comparison of preoperative and postoperative models showed a median RMSE of 2.2 (1.5-11.1), MSD of 0.5 (-0.6-6.1), and HD of 1.5 (1.1-6.5) and the differences were significantly different for RMSE (p < 0.001) and HD (p < 0.001). The difference was not significantly different for MSD (p = 0.554). Three-dimensional analysis of virtual and postoperative models had a median RMSE of 2.3 (1.3-10.7), MSD of -0.1 (-1.0-5.6), and HD of 1.7 (0.1-5.9). CONCLUSIONS: Open-source software-based in-house planning is a feasible, inexpensive, and fast method that enables accurate reconstructions. Additionally, it is excellent for teaching purposes.
RESUMO
The packaging of fresh meat has been studied for decades, leading to improved packaging types and conditions such as modified atmosphere packaging (MAP). While commonly used meat packaging uses fossil fuel-based materials, the use of biodegradable packaging materials for this application has not been studied widely. This study aimed at evaluating the sustainability of biodegradable packaging materials compared to established conventional packaging materials through analyses of the quality of freshly packaged pork. The quality was assessed by evaluating sensory aspects, meat color and microbiological attributes of the pork products. The results show no significant differences (p > 0.05) in ground pork and pork loin stored in biodegradable MAP (BioMAP) and conventional MAP for the evaluated sensory attributes, meat color or total bacterial count (TBC) over extended storage times. The data suggest that BioMAP could be a viable alternative to MAP using conventional, fossil fuel-based materials for the storage of fresh meats, while simultaneously fulfilling the customers' wishes for a more environmentally friendly packaging alternative.
RESUMO
Temporal muscle thickness (TMT) was investigated as a novel surrogate marker on MRI examinations of the brain, to detect patients who may be at risk for sarcopenia. TMT was analyzed in a retrospective, normal collective cohort (n = 624), to establish standard reference values. These reference values were correlated with grip strength measurements and body mass index (BMI) in 422 healthy volunteers and validated in a prospective cohort (n = 130) of patients with various neurological disorders. Pearson correlation revealed a strong association between TMT and grip strength (retrospective cohort, ρ = 0.746; p < 0.001; prospective cohort, ρ = 0.649; p < 0.001). A low or no association was found between TMT and age (retrospective cohort, R2 correlation coefficient 0.20; p < 0.001; prospective cohort, ρ = -0.199; p = 0.023), or BMI (retrospective cohort, ρ = 0.116; p = 0.042; prospective cohort, ρ = 0.227; p = 0.009), respectively. Male patients with temporal wasting and unintended weight loss, respectively, showed significantly lower TMT values (p = 0.04 and p = 0.015, unpaired t-test). TMT showed a high correlation with muscle strength in healthy individuals and in patients with various neurological disorders. Therefore, TMT should be integrated into the diagnostic workup of neurological patients, to prevent, delay, or treat sarcopenia.
RESUMO
In this work, we investigated the interaction of phenylphosphonic acid (PPA, C6H5PO3H2) with atomically-defined Co3O4(111) thin films, grown on Ir(100), under ultrahigh vacuum (UHV) conditions and in the electrochemical environment. In the first step, we employed infrared reflection absorption spectroscopy (IRAS) and followed the formation of a saturated monolayer (380 K) in UHV. We observed that the binding motif changes from a chelating tridentate in the sub-monolayer regime to a chelating bidentate at full monolayer coverages. In the electrochemical environment, we analyzed the interaction of PPA with the same Co3O4(111) surface by electrochemical infrared reflection absorption spectroscopy (EC-IRRAS) (0.3 VRHE-1.3 VRHE). When adsorbed at pH 10 from an ammonia buffered aqueous solution, PPA binds to the surface in form of a fully deprotonated chelating bidentate. With increasing electrode potential, we observed two fully reversible processes. At low buffer concentration, protons are released upon oxidation of surface Co2+ ions and lead to protonation of the anchored phosphonates. At high buffer concentration, most of the protons released are accepted by NH3. Simultaneously, the surface phosphonate changes its adsorption motif from bidentate to tridentate while adopting a more upright geometry.
RESUMO
Molecular photoswitches provide an extremely simple solution for solar energy conversion and storage. To convert stored energy to electricity, however, the photoswitch has to be coupled to a semiconducting electrode. In this work, we report on the assembly of an operational solar-energy-storing organic-oxide hybrid interface, which consists of a tailor-made molecular photoswitch and an atomically-defined semiconducting oxide film. The synthesized norbornadiene derivative 2-cyano-3-(4-carboxyphenyl)norbornadiene (CNBD) was anchored to a well-ordered Co3O4(111) surface by physical vapor deposition in ultrahigh vacuum. Using a photochemical infrared reflection absorption spectroscopy experiment, we demonstrate that the anchored CNBD monolayer remains operational, i.e., can be photo-converted to its energy-rich counterpart 2-cyano-3-(4-carboxyphenyl)quadricyclane (CQC). We show that the activation barrier for energy release remains unaffected by the anchoring reaction and the anchored photoswitch can be charged and discharged with high reversibility. Our atomically-defined solar-energy-storing model interface enables detailed studies of energy conversion processes at organic/oxide hybrid interfaces.
RESUMO
Photochemical in situ studies in a well-controlled surface science environment can help to understand photochemical reactions in organic thin films in more detail. To perform such studies without external focusing or light guiding systems, we designed a high-intensity UV-photon source, which is compatible with an ultra-high vacuum (UHV) environment. The UV source is based on a high power light-emitting diode (LED), soldered onto a copper heat reservoir to avoid overheating. The LED can be placed in close vicinity in front of a single crystal, providing flux densities of 2 × 1018 photons s-1 cm-2 at a wavelength of 365 nm. Thus, the device provides light intensities one order of magnitude higher as compared to conventional continuous wave arc lamps, at only a small variation of the flux of less than ±20% over a sample surface of 10 × 8 mm2. The UV source is mounted in a UHV infrared reflection absorption spectroscopy system and triggered by using the IR spectrometer. This allows fully automatized in situ IR studies of photochemical reactions at interfaces and thin films. We prove the functionality of the device by studying the photochemical conversion of norbornadiene (NBD) to quadricyclane (QC) mediated by the photosensitizer 4,4'-bis(dimethylamino)benzophenone (Michler's ketone, MK). NBD and MK were grown by physical vapor deposition in the form of thin films on Pt(111) at 120 K. Even at prolonged UV irradiation (>100 s), the temperature of the sample increased by less than 10 K. We report first successful conversion of NBD to QC under UHV conditions and follow the conversion behavior as a function of the photon dose and NBD/MK ratio. Initial quantum yields of up to 23% and selectivity for a QC of 70% are obtained at NBD/MK of 7.4:1, indicating good electronic coupling between NBD and MK even in a frozen multilayer. For both very small and very large NBD loadings, the conversion efficiency decreases, which is attributed to the effect of the metallic substrate and phase separation in thick multilayers, respectively.
RESUMO
The interaction of water with metal oxides controls their activity and stability in heterogeneous catalysis and electrocatalysis. In this work, we combine density functional theory calculations and infrared reflection absorption spectroscopy (IRAS) to identify the structural motifs formed upon interaction of water with an atomically defined Co3O4(111) surface. Three principal structures are observed: (i) strongly bound isolated OD, (ii) extended hydrogen-bonded OD/D2O structures, and (iii) a third structure which has not been reported to our knowledge. In this structure, surface Co2+ ions bind to three D2O molecules to form an octahedrally coordinated Co2+ with a "half hydration shell". We propose that this hydration structure represents an important intermediate in reorganization and dissolution on oxide surfaces which expose highly unsaturated surface cations.
RESUMO
Understanding the correlation between structure and reactivity of oxide surfaces is vital for the rational design of catalytic materials. In this work, we demonstrate the exceptional degree of structure sensitivity of the water dissociation reaction for one of the most important materials in catalysis and electrocatalysis. We studied H2O on two atomically defined cobalt oxide surfaces, CoO(100) and Co3O4(111). Both surfaces are terminated by O2- and Co2+ in different coordination. By infrared reflection absorption spectroscopy and synchrotron radiation photoelectron spectroscopy we show that H2O adsorbs molecularly on CoO(100), while it dissociates and forms very strongly bound OH and partially dissociated (H2O) n(OH) m clusters on Co3O4(111). We rationalize this structure dependence by the coordination number of surface Co2+. Our results show that specific well-ordered cobalt oxide surfaces interact very strongly with H2O whereas others do not. We propose that this structure dependence plays a key role in catalysis with cobalt oxide nanomaterials.
RESUMO
We have studied the anchoring mechanism of a phosphonic acid on an atomically defined oxide surface. Using time-resolved infrared reflection absorption spectroscopy, we investigated the reaction of deuterated phenylphosphonic acid (DPPA, C6H5PO3D2) with an atomically defined Co3O4(111) surface in situ during film growth by physical vapor deposition. We show that the binding motif of the phosphonate anchor group changes as a function of coverage. At low coverage, DPPA binds in the form of a chelating tridentate phosphonate, while a transition to a chelating bidentate occurs close to monolayer saturation coverage. However, the coverage-dependent change in the binding motif is not associated with a major change of the molecular orientation, suggesting that the rigid phosphonate linker always maintains the DPPA in a strongly tilted orientation irrespective of the surface coverage.
RESUMO
The characteristics and risk factors of pigeon paramyxovirus type 1 (PPMV-1) infection in humans are poorly known. We performed virological, pathological, and epidemiological analyses of a Dutch case, and compared the results with those of a US case. Both infections occurred in transplant patients under immunosuppressive therapy and caused fatal respiratory failure. Both virus isolates clustered with PPMV-1, which has pigeons and doves as reservoir. Experimentally inoculated pigeons became infected and transmitted the virus to naive pigeons. Both patients were likely infected by contact with infected pigeons or doves. Given the large populations of feral pigeons with PPMV-1 infection in cities, increasing urbanization, and a higher proportion of immunocompromised individuals, the risk of severe human PPMV-1 infections may increase. We recommend testing for avian paramyxovirus type 1, including PPMV-1, in respiratory disease cases where common respiratory pathogens cannot be identified.
Assuntos
Doenças das Aves/virologia , Galinhas/virologia , Columbidae/virologia , Doença de Newcastle/diagnóstico , Vírus da Doença de Newcastle/isolamento & purificação , Pneumonia/diagnóstico , Síndrome do Desconforto Respiratório/diagnóstico , Animais , Evolução Fatal , Feminino , Humanos , Hospedeiro Imunocomprometido , Metagenômica , Pessoa de Meia-Idade , Doença de Newcastle/patologia , Doença de Newcastle/virologia , Vírus da Doença de Newcastle/patogenicidade , Filogenia , Pneumonia/patologia , Pneumonia/virologia , Síndrome do Desconforto Respiratório/patologia , Síndrome do Desconforto Respiratório/virologia , Fatores de Risco , Virulência , ZoonosesRESUMO
Indole derivatives were recently proposed as potential liquid organic hydrogen carriers (LOHC) for storage of renewable energies. In this work, we have investigated the adsorption, dehydrogenation and degradation mechanisms in the indole/indoline/octahydroindole system on Pt(111). We have combined infrared reflection absorption spectroscopy (IRAS), X-ray photoelectron spectroscopy (XPS) and DFT calculations. Indole multilayers show a crystallization transition at 200â K, in which the molecules adopt a strongly tilted orientation, before the multilayer desorbs at 220â K. For indoline, a less pronounced restructuring transition occurs at 150â K and multilayer desorption is observed at 200â K. Octahydroindole multilayers desorb already at 185â K, without any indication for restructuring. Adsorbed monolayers of all three compounds are stable up to room temperature and undergo deprotonation at the NH bond above 300â K. For indoline, the reaction is followed by partial dehydrogenation at the 5-membered ring, leading to the formation of a flat-lying di-σ-indolide in the temperature range from 330-390â K. Noteworthy, the same surface intermediate is formed from indole. In contrast, the reaction of octahydroindole with Pt(111) leads to the formation of a different intermediate, which originates from partial dehydrogenation of the 6-membered ring. Above 390â K, all three compounds again form the same strongly dehydrogenated and partially decomposed surface species.
RESUMO
We investigated the adsorption behavior of 4,4'-biphenhyl dicarboxylic acid (BDA) on well-ordered CoO(111) films grown on Ir(100) as a function of coverage and temperature using time-resolved and temperature-programmed infrared reflection absorption spectroscopy (TR-IRAS, TP-IRAS) in combination with density functional theory (DFT) and scanning tunneling microscopy (STM) under ultrahigh vacuum (UHV) conditions. To compare the binding behavior of BDA as a function of the oxide film thickness, three different CoO(111) film thicknesses were explored: films of about 20 bilayers (BLs) (approximately 5 nm), 2 BLs, and 1 BL. The two carboxylic acid groups of BDA offer two potential anchoring points to the oxide surface. At 150 K, intact BDA adsorbs on 20 BL thick oxide films in planar geometry with the phenyl rings aligned parallel to the surface. With decreasing oxide film thickness, we observe an increasing tendency for deprotonation and the formation of flat-lying BDA molecules anchored as dicarboxylates. After saturation of the first monolayer, intact BDA multilayers grow with molecules aligned parallel to the surface. The BDA multilayer desorbs at around 360 K. Completely different growth behavior is observed if BDA is deposited above the multilayer desorption temperature. Initially, doubly deprotonated dicarboxylates are formed by adopting a flat-lying orientation. With increasing exposure, however, the adsorbate layer transforms into upright standing monocarboxylates. A sharp OH stretching band (3584 cm-1) and a blue-shifted CO stretching band (1759 cm-1) indicate weakly interacting apical carboxylic acid groups at the vacuum interface. The anchored monocarboxylate phase slowly desorbs in a temperature range of up to 470 K. At higher temperature, a flat-lying doubly deprotonated BDA is formed, which desorbs and decomposes in a temperature range of up to 600 K.
RESUMO
Acidosis occurs in a variety of pathophysiological and painful conditions where it is thought to excite or contribute to excitation of nociceptive neurons. Despite potential clinical relevance the principal receptor for sensing acidosis is unclear, but several receptors have been proposed. We investigated the contribution of the acid-sensing ion channels, transient receptor potential vanilloid type 1 (TRPV1) and transient receptor potential ankyrin type 1 (TRPA1) to peripheral pain signaling. We first established a human pain model using intraepidermal injection of the TRPA1 agonist carvacrol. This resulted in concentration-dependent pain sensations, which were reduced by experimental TRPA1 antagonist A-967079. Capsaicin-induced pain was reduced by the TRPV1 inhibitor BCTC. Amiloride was used to block acid-sensing ion channels. Testing these antagonists in a double-blind and randomized experiment, we probed the contribution of the respective channels to experimental acidosis-induced pain in 15 healthy human subjects. A continuous intraepidermal injection of pH 4.3 was used to counter the buffering capacity of tissue and generate a prolonged painful stimulation. In this model, addition of A-967079, BCTC or amiloride did not reduce the reported pain. In conclusion, target-validated antagonists, applied locally in human skin, have excluded the main hypothesized targets and the mechanism of the human acidosis-induced pain remains unclear. PERSPECTIVE: An acidic milieu is a trigger of pain in many clinical conditions. The aim of this study was to identify the contribution of the currently hypothesized sensors of acid-induced pain in humans. Surprisingly, inhibition of these receptors did not alter acidosis-induced pain.
Assuntos
Acidose/complicações , Analgésicos/uso terapêutico , Dor/tratamento farmacológico , Dor/etiologia , Canal de Cátion TRPA1/antagonistas & inibidores , Canais de Cátion TRPV/antagonistas & inibidores , Bloqueadores do Canal Iônico Sensível a Ácido/uso terapêutico , Adulto , Amilorida/uso terapêutico , Análise de Variância , Capsaicina/efeitos adversos , Relação Dose-Resposta a Droga , Método Duplo-Cego , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Oximas/uso terapêutico , Medição da Dor , Pirazinas/uso terapêutico , Piridinas/uso terapêuticoRESUMO
We have investigated the surface chemistry of the polycyclic valence-isomer pair norbornadiene (NBD) and quadricyclane (QC) on Pt(111). The NBD/QC system is considered to be a prototype for energy storage in strained organic compounds. By using a multimethod approach, including UV photoelectron, high-resolution X-ray photoelectron, and IR reflection-absorption spectroscopic analysis and DFT calculations, we could unambiguously identify and differentiate between the two molecules in the multilayer phase, which implies that the energy-loaded QC molecule is stable in this state. Upon adsorption in the (sub)monolayer regime, the different spectroscopies yielded identical spectra for NBD and QC at 125 and 160â K, when multilayer desorption takes place. This behavior is explained by a rapid cycloreversion of QC to NBD upon contact with the Pt surface. The NBD adsorbs in a η2 :η1 geometry with an agostic Pt-H interaction of the bridgehead CH2 subunit and the surface. Strong spectral changes are observed between 190 and 220â K because the hydrogen atom that forms the agostic bond is broke. This reaction yields a norbornadienyl intermediate species that is stable up to approximately 380â K. At higher temperatures, the molecule dehydrogenates and decomposes into smaller carbonaceous fragments.
RESUMO
We have investigated the influence of the structure of oxide surfaces on the thermal stability of anchored phthalic acid (PA) thin films. Specifically, we have performed temperature programmed infrared reflection absorption spectroscopy (TP-IRAS) of PA films deposited by physical vapor deposition (PVD) in ultra-high vacuum (UVH) onto three well-ordered surfaces: Co3O4(111), CoO(111) and CoO(100), all grown on Ir(100). Restructuring and desorption of PA were monitored in situ by TP-IRAS. Upon annealing of PA multilayers, co-adsorbed phthalic anhydride (PAA) desorbs at 200 K and a structural transition to a flat-lying adsorption geometry occurs at 250 K, before the PA multilayer desorbs at 300 K. At temperatures up to 400 K co-adsorbed mono-carboxylates partially desorb and partially convert to bis-carboxylates. Pronounced structure dependencies are observed regarding the thermal stability of the anchored bis-carboxylate monolayers. From Co3O4(111) the anchored PA desorbs over a wide range of temperatures centered at around 540 K. Weaker binding is observed for CoO(111) with desorption temperatures centered around 490 K. The strongest binding occurs on CoO(100), where the anchored PA films are found to be perfectly stable up to 510 K, before desorption starts and centers at around 580 K. The differences in binding strength are rationalized based on the density and the accessibility of the surface Co(2+) ions. The findings show that the atomic structure of the oxide surface plays an important role in the stability of organic hybrid interfaces.
RESUMO
We have performed a model study to explore the influence of surface structure on the anchoring of organic molecules on oxide materials. Specifically, we have investigated the adsorption of phthalic acid (PA) on three different, well-ordered, and atomically defined cobalt oxide surfaces, namely 1) Co3O4(111), 2) CoO(111), and 3) CoO(100) on Ir(100). PA was deposited by physical vapor deposition (PVD). The formation of the PA films and interfacial reactions were monitored in situ during growth by isothermal time-resolved IR reflection absorption spectroscopy (TR-IRAS) under ultrahigh vacuum (UHV) conditions. We observed a pronounced structure dependence on the three surfaces with three distinctively different binding geometries and characteristic differences depending on the temperature and coverage. 1) PA initially binds to Co3O4(111) through the formation of a chelating bis-carboxylate with the molecular plane oriented perpendicularly to the surface. Similar species were observed both at low temperature (130 K) and at room temperature (300 K). With increasing exposure, chelating mono-carboxylates became more abundant and partially replaced the bis-carboxylate. 2) PA binds to CoO(100) in the form of a bridging bis-carboxylate for low coverage. Upon prolonged deposition of PA at low temperature, the bis-carboxylates were converted into mono-carboxylate species. In contrast, the bis-carboxylate layer was very stable at 300 K. 3) For CoO(111) we observed a temperature-dependent change in the adsorption mechanism. Although PA binds as a mono-carboxylate in a bridging bidentate fashion at low temperature (130 K), a strongly distorted bis-carboxylate was formed at 300 K, possibly as a result of temperature-dependent restructuring of the surface. The results show that the adsorption geometry of PA depends on the atomic structure of the oxide surface. The structure dependence can be rationalized by the different arrangements of cobalt ions at the three surfaces.
RESUMO
We have studied the adsorption of tetraphenylporphyrin (2HTPP) and its carboxylated counterpart mono-para-carboxyphenyltriphenylporphyrin (MCTPP) on an atomically defined Co3O4(111) film under ultrahigh vacuum (UHV) conditions. Using time-resolved infrared reflection absorption spectroscopy (TR-IRAS), we show that 2HTPP adsorbs molecularly in a flat-lying orientation, whereas MCTPP binds to the surface via formation of a chelating bidentate carboxylate upon deposition at 400 K. Combining TR-IRAS and density-functional theory (DFT), we determine the molecular tilting angle as a function of coverage. We show that the MCTPP adsorption geometry changes from a nearly flat-lying orientation (tilting angle <30°) at low coverage to a nearly perfectly upright-standing orientation (tilting angle of approximately 80°) in the full monolayer.