RESUMO
In this work, the electrochemical behavior of 4-phenylurazole (Ph-Ur) was studied and the latter was used as a molecular anchor for the electrochemical bioconjugation of tyrosine (Y). Cyclic voltammetry (CV) and controlled potential coulometry (CPC) allowed the in-situ generation of the PTAD (4-phenyl-3â¯H-1,2,4-triazole-3,5(4â¯H)-dione) species from phenylurazole on demand for tyrosine electrolabeling. The chemoselectivity of the reaction was studied with another amino acid (lysine, Lys) and no changes in Lys were observed. To evaluate the performance of tyrosine electrolabeling, coulometric analyses at controlled potentials were performed on solutions of phenylurazole and the phenylurazole-tyrosine mixture in different proportions (2:1, 1:1, and 1:2). The electrolysis of the phenylurazole-tyrosine mixture in the ratio (1:2) produced a charge of 2.07â¯C, very close to the theoretical value (1.93â¯C), with high reaction kinetics, a result obtained here for the first time. The products obtained were identified and characterized by liquid chromatography coupled to high-resolution electrospray ionization mass spectrometry (LC-HRMS and LC- HRMS2). Two products were formed from the click reactions, one of which was the majority. Another part of this work was to study the electrochemical degradation of the molecular anchor 4-phenylazole (Ph-Ur). Four stable degradation products of phenylurazole were identified (C7H9N2O, C6H8N, C6H8NO, C14H13N4O2) based on chromatographic profiles and mass spectrometry results. The charge generated during the electrolysis of phenylurazole (two-electron process) (2.85â¯C) is inconsistent with the theoretical or calculated charge (1.93â¯C), indicating that secondary/parasitic reactions occurred during the electrolysis of the latter. In conclusion, the electrochemically promoted click phenylurazole-tyrosine reactions give rise to click products with high reaction kinetics and yields in the (1:2) phenylurazole-tyrosine ratios, and the presence of side reactions is likely to affect the yield of the click phenylurazole-tyrosine reaction.
Assuntos
Química Click , Técnicas Eletroquímicas , Tirosina , Tirosina/química , Técnicas Eletroquímicas/métodos , Química Click/métodos , Cromatografia Líquida de Alta Pressão/métodos , Cinética , Triazóis/química , Triazóis/análise , Espectrometria de Massas por Ionização por Electrospray/métodosRESUMO
Single-impact electrochemistry for the analysis of bacteria is a powerful technique for biosensing applications at the single-cell scale. The sensitivity of this electro-analytical method has been widely demonstrated based on chronoamperometric measurements at an ultramicroelectrode polarized at the appropriate potential of redox species in solution. Furthermore, the most recent studies display a continuous improvement in the ability of this sensitive electrochemical method to identify different bacterial strains with better selectivity. To achieve this, several strategies, such as the presence of a redox mediator, have been investigated for detecting and identifying the bacterial cell through its own electrochemical behavior. Both the blocking electrochemical impacts method and electrochemical collisions of single bacteria with a redox mediator are reported in this review and discussed through relevant examples. An original sensing strategy for virulence factors originating from pathogenic bacteria is also presented, based on a recent proof of concept dealing with redox liposome single-impact electrochemistry. The limitations, applications, perspectives, and challenges of single-impact electrochemistry for bacteria analysis are briefly discussed, based on the most significant published data.
Assuntos
Bactérias , Técnicas Biossensoriais , Eletroquímica , Técnicas Eletroquímicas/métodos , Oxirredução , Técnicas Biossensoriais/métodosRESUMO
The detection of Rhamnolipid virulence factor produced by Pseudomonas aeruginosa involved in nosocomial infections is reported by using the redox liposome single impact electrochemistry. Redox liposomes based on 1,2-dimyristoyl-sn-glycero-3-phosphocholine as a pure phospholipid and potassium ferrocyanide as an encapsulated redox content are designed for using the interaction of the target toxin with the lipid membrane as a sensing strategy. The electrochemical sensing principle is based on the weakening of the liposomes lipid membrane upon interaction with Rhamnolipid toxin which leads upon impact at an ultramicroelectrode to the breakdown of the liposomes and the release/electrolysis of its encapsulated redox probe. We present as a proof of concept the sensitive and fast sensing of a submicromolar concentration of Rhamnolipid which is detected after less than 30â minutes of incubation with the liposomes, by the appearing of current spikes in the chronoamperometry measurement.
Assuntos
Toxinas Bacterianas/análise , Técnicas Eletroquímicas , Glicolipídeos/análise , Fosfatidiletanolaminas/química , Pseudomonas aeruginosa/química , Lipossomos/química , OxirreduçãoRESUMO
In vitro and in vivo experimental models, mainly based on cell cultures, animals, healthy humans and clinical trials, are useful approaches for identifying the main metabolic pathways. However, time, cost, and matrix complexity often hinder the success of these methods. In this study, we propose an alternative non-enzymatic method, using electrochemistry (EC) coupled to liquid chromatography (LC) - high resolution mass spectrometry (HRMS) - DFT theoretical calculations (EC/LC-MS/DFT) for the mimicry/simulation of the environmental degradation of phenylurea herbicides, and for the mechanism elucidation of this class of herbicides. Fenuron, monuron, isoproturon, linuron, monolinuron, metoxuron and chlortoluron were selected as relevant model compounds. The intended compounds are oxidized by EC, separated by LC and detected using electrospray ionization HRMS. The main oxidation products were hydroxylated compounds obtained by substitution and addition reactions. Unstable quinone imines/methines, rarely observed by conventional methods, have been identified during the oxidative degradation of phenylurea herbicides for the first time in this study. Some were directly observed and the others were trapped by glutathione GSH. Reactions such as hydrolytic substitutions (-Cl/+OH and -C3H7/+OH and -CH3/+OH and -OCH3/+OH), aromatic hydroxylation, alkyl carbon hydroxylation, dehydrochlorination/dehydromethylation/dehydromethoxylation and conjugation have been successfully mimicked. The obtained results, supported by theoretical calculations, are useful for simulating/understanding and predicting the oxidative degradation pathways of pesticides in the environment.
Assuntos
Herbicidas , Animais , Cromatografia Líquida , Teoria da Densidade Funcional , Eletroquímica , Herbicidas/análise , Humanos , Compostos de Fenilureia/análise , Espectrometria de Massas por Ionização por ElectrosprayRESUMO
Currently, there is a growing interest in the study of environmental degradation pathways of organic contaminants such as pesticides, with the objective to better understand their potential risk for environmental systems and living organisms. In this context, DFT (conceptual density functional theory) and predictive methods may systematically be used to simplify and accelerate the elucidation of environmental degradation. We report herein the electrochemical behavior/degradation of the carbendazim (CBZ) fungicide widely used to treat cereal and fruit crops. Oxidative degradation of CBZ was studied using an electrochemical flow-through cell directly coupled to a mass spectrometer for rapid identification of CBZ degradation products. The structural elucidation of CBZ oxidation products was based on retention time, accurate mass, isotopic distribution and fragmentation pattern by using LC-HRMS an LC-HRMS2. The most important chemical reactions found to occur in the transformation of CBZ were hydrolysis and hydroxylation. EC-LC-MS and EC-MS analysis has made it possible to highlight the identification of degradation products of CBZ. In addition to previously known transformation products common to those observed during environmental degradation (monocarbomethoxyguanidine, benzimidazole-isocyanate, 2-aminobenzimidazole, hydroxy-2-aminobenzimidazole, hydroxycarbendazim, CBZ-CBZ dimer), two new degradation products were identified in this work: a quinone imine and a nitrenium ion. Electrochemistry mass spectrometry hyphenated techniques represent an accessible, rapid and reliable tool to elucidate the oxidative degradation of CBZ, including reactive degradation products and conjugates.
Assuntos
Fungicidas Industriais , Benzimidazóis , Carbamatos , Eletroquímica , Espectrometria de Massas , OxirreduçãoRESUMO
Three new copper(I) complexes [Cu(LX)2]+(PF6-) (where LX stands for 2,9-dihalo-1,10-phenanthroline and X = Cl, Br, and I) have been synthesized in order to study the impact of halogen substituents tethered in the α position of the chelating nitrogen atoms on their physical properties. The photophysical properties of these new complexes (hereafter named Cu-X) were characterized in both their ground and excited states. Femtosecond ultrafast spectroscopy revealed that early photoinduced processes are faster for Cu-I than for Cu-Cl or Cu-Br, both showing similar behaviors. Their electronic absorption and electrochemical properties are comparable to benchmark [Cu(dmp)2]+ (where dmp stands for 2,9-dimethyl-1,10-phenanthroline); furthermore, their optical features were fully reproduced by time-dependent density functional theory and ab initio molecular dynamics calculations. All three complexes are luminescent at room temperature, showing that halogen atoms bound to positions 2 and 9 of phenanthroline are sufficiently bulky to prevent strong interactions between the excited Cu complexes and solvent molecules in the coordination sphere. Their behavior in the excited state, more specifically the extent of the photoluminescence efficiency and its dependence on the temperature, is, however, strongly dependent on the nature of the halogen. A combination of ultrafast transient absorption spectroscopy, temperature-dependent steady-state fluorescence spectroscopy, and computational chemistry allows one to gain a deeper understanding of the behavior of all three complexes in their excited state.
RESUMO
The development of new bio-orthogonal ligation methods for the conjugation of native proteins is of particular importance in the field of chemical biology and biotherapies. In this work, we developed a traceless electrochemical method for protein bioconjugation. The electrochemically promoted tyrosine-click (e-Y-CLICK) allowed the chemoselective Y-modification of peptides and proteins with labeled urazoles. A low potential is applied in an electrochemical cell to activate urazole anchors in situ and on demand, without affecting the electroactive amino acids from the protein. The versatility of the electrosynthetic approach was shown on biologically relevant peptides and proteins such as oxytocin, angiotensin 2, serum bovine albumin, and epratuzumab. The fully conserved enzymatic activity of a glucose oxidase observed after e-Y-CLICK further highlights the softness of the method. The e-Y-CLICK protocols were successfully performed in pure aqueous buffers, without the need for co-solvents, scavenger or oxidizing chemicals, and should therefore significantly broaden the scope of bioconjugation.
Assuntos
Sondas Moleculares/química , Proteínas/química , Triazinas/química , Tirosina/química , Sequência de Aminoácidos , Animais , Aspergillus niger/enzimologia , Bovinos , Química Click/métodos , Técnicas Eletroquímicas/métodos , Glucose Oxidase/química , Humanos , Sondas Moleculares/síntese química , Triazinas/síntese químicaRESUMO
3-Amino-6-aryl- and 3-amino-6-heteroarylpyridazines have been obtained in generally good yield using a nickel-catalyzed electrochemical cross-coupling between 3-amino-6-chloropyridazines and aryl or heteroaryl halides at room temperature. Comparative experiments involving classical palladium-catalyzed reactions, such as Suzuki, Stille, or Negishi cross-couplings, reveal that the electrochemical method can constitute a reliable alternative tool for biaryl formation. A possible reaction mechanism is proposed on the basis of electrochemical analyses.
Assuntos
Reagentes de Ligações Cruzadas/química , Níquel/química , Piridazinas/química , Piridazinas/síntese química , Catálise , Técnicas Eletroquímicas , Estrutura MolecularRESUMO
The electrochemical reduction of sensitive sulfonamides is described. The addition of a benzoyl group on the nitrogen atom facilitates the reductive cleavage of sulfonamides preventing ß-fragmentation and epimerization. This strategy was successfully applied to the cyclopropylamine and to α-amino stannanes.
RESUMO
Synthesis of alternating pyridine-pyrrole molecular strands composed of two electron-rich pyrrole units (donors) sandwiched between three pyridinic cores (acceptors) is described. The envisioned strategy was a smooth electrosynthesis process involving ring contraction of corresponding tripyridyl-dipyridazine precursors. 2,6-Bis[6-(pyridazin-3-yl)]pyridine ligands 2a-c bearing pyridine residues at the terminal positions were prepared in suitable quantities by a Negishi metal cross-coupling procedure. The yields of heterocyclic coupling between 2-pyridyl zinc bromide reagents 12a-c and 2,6-bis(6-trifluoromethanesulfonylpyridazin-3-yl)pyridine increased from 68 to 95% following introduction of electron-donating methyl groups on the metallated halogenopyridine units. Favorable conditions for preparative electrochemical reduction of tripyridyl-dipyridazines 2b,c were established in THF/acetate buffer (pH 4.6)/acetonitrile to give the targeted 2,6-bis[5-(pyridin-2-yl)pyrrol-2-yl]pyridines 1b and 1c in good yields. The absorption behavior of the donor-acceptor tripyridyl-dipyrrole ligands was evaluated and compared to theoretical calculations. Highly fluorescent properties of these chromophores were found (ν(em)≈2 × 10(4) cm(-1) in MeOH and CH(2)Cl(2)), and both pyrrolic ligands exhibit a remarkable quantum yield in CH(2)Cl(2) (φ(f)=0.10). Structural studies in the solid state established the preferred cis conformation of the dipyrrolic ligands, which adopting a planar arrangement with an embedded molecule of water having a complexation energy exceeding 10 kcal mol(-1). The ability of the tripyridyl-dipyrrole to complex two copper(II) ions in a pentacoordinate square was investigated.
Assuntos
Antineoplásicos/síntese química , Cobre/química , Nitrogênio/química , Piridinas/síntese química , Pirróis/síntese química , Antineoplásicos/química , Antineoplásicos/farmacologia , Sítios de Ligação , Catálise , Proliferação de Células/efeitos dos fármacos , Ensaios de Seleção de Medicamentos Antitumorais , Técnicas Eletroquímicas , Feminino , Humanos , Ligantes , Masculino , Modelos Químicos , Estrutura Molecular , Piridinas/química , Piridinas/farmacologia , Pirróis/química , Pirróis/farmacologiaRESUMO
A general efficient electrochemical method for the preparation of aryl- and heteroarylpyridazines in a nickel-catalyzed cross-coupling reaction of 3-chloro-6-methoxypyridazine and 3-chloro-6-methylpyridazine with a range of functionalized aryl or heteroaryl halides is reported.
Assuntos
Eletroquímica/métodos , Níquel/química , Piridazinas/química , CatáliseRESUMO
The preparation of a humic acid modified carbon paste electrode (HA-MCPE) as well as the behavior of its surface as complexing agent toward Cu2+ cations are described. Electrochemical studies of the reduction of the complexed cations and of the anodic stripping oxidation of the resulting copper are outlined. The anodic stripping current was correlated to the Cu2+ concentrations. A well-defined method for the preparation of reproducible electrodes is described. The effects on the current response obtained by cyclic voltammetry of the humic acid ratio, the pH, the accumulation time, and the speed scan rate were studied. Calibration graphs were linear over the range 3 x 10(-8)-10(-5) mol L(-1) Cu2+ and the relative standard deviation (R.S.D.) was 1.2% (n=5) for [Cu2+] = 1.6 x 10(-5) mol L(-1). 5 min accumulation time for [Cu2+] > 10(-7) mol L(-1) and 10 min for [Cu2+] < 10(-7) mol L(-1) were sufficient to permit sensitive and reproducible measurements. The electrode was successfully used to measure Cu2+ in real samples and the results were compared to those obtained by the standard method with differential pulse anodic stripping voltammetry.