Multilayer In-Plane Heterostructures Based on Transition Metal Dichalcogenides for Advanced Electronics.

In-plane heterostructures of transition metal dichalcogenides (TMDCs) have attracted much attention for high-performance electronic and optoelectronic devices. To date, mainly monolayer-based in-plane heterostructures have been prepared by chemical vapor deposition (CVD), and their optical and electrical properties have been investigated. However, the low dielectric properties of monolayers prevent the generation of high concentrations of thermally excited carriers from doped impurities. To solve this issue, multilayer TMDCs are a promising component for various electronic devices due to the availability of degenerate semiconductors. Here, we report the fabrication and transport properties of multilayer TMDC-based in-plane heterostructures. The multilayer in-plane heterostructures are formed through CVD growth of multilayer MoS2 from the edges of mechanically exfoliated multilayer flakes of WSe2 or NbxMo1-xS2. In addition to the in-plane heterostructures, we also confirmed the vertical growth of MoS2 on the exfoliated flakes. For the WSe2/MoS2 sample, an abrupt composition change is confirmed by cross-sectional high-angle annular dark-field scanning transmission electron microscopy. Electrical transport measurements reveal that a tunneling current flows at the NbxMo1-xS2/MoS2 in-plane heterointerface, and the band alignment is changed from a staggered gap to a broken gap by electrostatic electron doping of MoS2. The formation of a staggered gap band alignment of NbxMo1-xS2/MoS2 is also supported by first-principles calculations.

Emergence of Interlayer Coherence in Twist-Controlled Graphene Double Layers.

We report enhanced interlayer tunneling with reduced linewidth at zero interlayer bias in a twist-controlled double monolayer graphene heterostructure in the quantum Hall regime, when the top (ν_{T}) and bottom (ν_{B}) layer filling factors are near ν_{T}=±1/2,±3/2 and ν_{B}=±1/2,±3/2, and the total filling factor ν=±1 or ±3. The zero-bias interlayer conductance peaks are stable against variations of layer filling factor, and signal the emergence of interlayer phase coherence. Our results highlight twist control as a key attribute in revealing interlayer coherence using tunneling.

Synthesis and structure of a pyridine-stabilized silanone molybdenum complex and its reactions with PMe3 and acetone.

Silanones (OSiR2) are highly reactive species that readily convert to oligomeric siloxane (O-SiR2)n. The coordination of silanones to transition metal fragments to afford silanone-coordinated complexes is a reliable silanone stabilization method. Herein, a pyridine-stabilized silanone molybdenum complex Cp*(OC)2Mo{OSiMes2(py)}(SiMe3) (2b, Cp*: η5-C5Me5, Mes: 2,4,6-Me3C6H2, and py: pyridine) was synthesized by reacting the silyl(silylene) complex Cp*(OC)2Mo(SiMes2)(SiMe3) (4b) with pyridine-N-oxide in pyridine. X-ray crystal structure analysis revealed that the geometry of complex 2b is similar to those of the previously synthesized DMAP-stabilized analogue Cp*(OC)2Mo{OSiMes2(DMAP)}(SiMe3) (2a, DMAP: 4-(dimethylamino)pyridine). The SiO and Mo-O bond distances in 2b are similar to those observed in 2a, but the N-Si coordination bond of 2b is slightly longer (approximately 0.05 Å) than that of 2a, indicating weaker pyridine coordination than that of DMAP. The reaction of 2a with excess PMe3 in C6D6 at room temperature for 28 h afforded Cp*(OC)2Mo(PMe3)(SiMe3) (5c) in a 43% NMR yield. In contrast, reacting 2b with excess PMe3 in C6D6 at room temperature for 9 h afforded 5c and the five-membered metallacyclic carbene complex Cp*(OC)Mo(C(SiMe3)OSiMes2O)(PMe3) (6) in 10% and 41% NMR yields, respectively. The reactions of pyridine-stabilized silanone complexes Cp*(OC)2M(OSiMes2(py))(SiMe3) (M = Mo (2b) and W (1b)) with acetone proceeded via pyridine elimination, coordination of acetone to the Si center in the silanone ligand, and elimination of HSiMe3 to give Cp*(OC)2M{OSiMes2OC(Me)CH2} (M = Mo (8) and W (9)) in high yields.

Diffused Beam Energy to Dope van der Waals Electronics and Boost Their Contact Barrier Lowering.

Contact engineering of two-dimensional semiconductors is a central issue for performance improvement of micro-/nanodevices based on these materials. Unfortunately, the various methods proposed to improve the Schottky barrier height normally require the use of high temperatures, chemical dopants, or complex processes. This work demonstrates that diffused electron beam energy (DEBE) treatment can simultaneously reduce the Schottky barrier height and enable the direct writing of electrical circuitry on van der Waals semiconductors. The electron beam energy projected into the region outside the electrode diffuses into the main channel, producing selective-area n-type doping in a layered MoTe2 (or MoS2) field-effect transistor. As a result, the Schottky barrier height at the interface between the electrode and the DEBE-treated MoTe2 channel is as low as 12 meV. Additionally, because selective-area doping is possible, DEBE can allow the formation of both n- and p-type doped channels within the same atomic plane, which enables the creation of a nonvolatile and homogeneous MoTe2 p-n rectifier with an ideality factor of 1.1 and a rectification ratio of 1.3 × 103. These results indicate that the DEBE method is a simple, efficient, mask-free, and chemical dopant-free approach to selective-area doping for the development of van der Waals electronics with excellent device performances.

Reversible Charge-Polarity Control for Multioperation-Mode Transistors Based on van der Waals Heterostructures.

Van der Waals (vdW) heterostructures-in which layered materials are purposely selected to assemble with each other-allow unusual properties and different phenomena to be combined and multifunctional electronics to be created, opening a new chapter for the spread of internet-of-things applications. Here, an O2 -ultrasensitive MoTe2 material and an O2 -insensitive SnS2 material are integrated to form a vdW heterostructure, allowing the realization of charge-polarity control for multioperation-mode transistors through a simple and effective rapid thermal annealing strategy under dry-air and vacuum conditions. The charge-polarity control (i.e., doping and de-doping processes), which arises owing to the interaction between O2 adsorption/desorption and tellurium defects at the MoTe2 surface, means that the MoTe2 /SnS2 heterostructure transistors can reversibly change between unipolar, ambipolar, and anti-ambipolar transfer characteristics. Based on the dynamic control of the charge-polarity properties, an inverter, output polarity controllable amplifier, p-n diode, and ternary-state logics (NMIN and NMAX gates) are demonstrated, which inspire the development of reversibly multifunctional devices and indicates the potential of 2D materials.

Ultrafast Operation of 2D Heterostructured Nonvolatile Memory Devices Provided by the Strong Short-Time Dielectric Breakdown Strength of h-BN.

Recently, the ultrafast operation (∼20 ns) of a two-dimensional (2D) heterostructured nonvolatile memory (NVM) device was demonstrated, attracting considerable attention. However, there is no consensus on its physical origin. In this study, various 2D NVM device structures are compared. First, we reveal that the hole injection at the metal/MoS2 interface is the speed-limiting path in the NVM device with the access region. Therefore, MoS2 NVM devices with a direct tunneling path between source/drain electrodes and the floating gate are fabricated by removing the access region. Indeed, a 50 ns program/erase operation is successfully achieved for devices with metal source/drain electrodes as well as graphite source/drain electrodes. This controlled experiment proves that an atomically sharp interface is not necessary for ultrafast operation, which is contrary to the previous literature. Finally, the dielectric breakdown strength (EBD) of h-BN under short voltage pulses is examined. Since a high dielectric breakdown strength allows a large tunneling current, ultrafast operations can be achieved. Surprisingly, an EBD = 26.1 MV/cm for h-BN is realized under short voltage pulses, largely exceeding the EBD = ∼12 MV/cm from the direct current (DC) measurement. This suggests that the high EBD of h-BN can be the physical origin of the ultrafast operation.

Functional characterization and vacuolar localization of fructan exohydrolase derived from onion (Allium cepa).

Fructans such as inulin and levan accumulate in certain taxonomic groups of plants and are a reserve carbohydrate alternative to starch. Onion (Allium cepa L.) is a typical plant species that accumulates fructans, and it synthesizes inulin-type and inulin neoseries-type fructans in the bulb. Although genes for fructan biosynthesis in onion have been identified so far, no genes for fructan degradation had been found. In this study, phylogenetic analysis predicted that we isolated a putative vacuolar invertase gene (AcpVI1), but our functional analyses demonstrated that it encoded a fructan 1-exohydrolase (1-FEH) instead. Assessments of recombinant proteins and purified native protein showed that the protein had 1-FEH activity, hydrolyzing the ß-(2,1)-fructosyl linkage in inulin-type fructans. Interestingly, AcpVI1 had an amino acid sequence close to those of vacuolar invertases and fructosyltransferases, unlike all other FEHs previously found in plants. We showed that AcpVI1 was localized in the vacuole, as are onion fructosyltransferases Ac1-SST and Ac6G-FFT. These results indicate that fructan-synthesizing and -degrading enzymes are both localized in the vacuole. In contrast to previously reported FEHs, our data suggest that onion 1-FEH evolved from a vacuolar invertase and not from a cell wall invertase. This demonstrates that classic phylogenetic analysis on its own is insufficient to discriminate between invertases and FEHs, highlighting the importance of functional markers in the nearby active site residues.

C-O and C-C bond cleavage of α,ß-unsaturated esters with the assistance of a gallane(pyridyl)iron complex.

Selective fragmentation of α,ß-unsaturated esters into CC, CO, and OR fragments was investigated with the assistance of a gallane(pyridyl)iron complex Cp*(OC)Fe{(η1-HGaMes2)(η1-2-C5H4N)} (1, Cp*: η5-C5Me5, Mes: 2,4,6-Me3C6H2). The reaction of 1 with methyl acrylate in C7D8 afforded vinyliron complex Cp*(OC)2Fe(CHCH2) (2) and 4-membered Ga2O2 cyclic gallane [Mes2GaOMe]2 (3). The C-O and C-C bonds in t-butyl acrylate were cleaved by the reaction with complex 1, producing complex 2 and pyridine-coordinated gallane Mes2(t-BuO)Ga(pyridine) (4). The selective bond cleavage reactions proceeded by the reactions of 1 with methyl methacrylate and methyl 2-butenoate to afford Cp*(OC)2Fe(CR1CHR2) (R1 = Me, R2 = H (5), R1 = H, R2 = Me (6)) and 3. In contrast, compound 3 was formed in 11% NMR yield by the reaction of 1 with methyl 3-butenoate (ß,γ-unsaturated ester), and complex mixtures of unidentified products were obtained by the reaction of 1 with methyl 4-pentenoate (γ,δ-unsaturated ester) and methyl propionate (saturated ester). The treatment of a cyclic ester, α-methylene-γ-butyrolactone, with 1 afforded a 4-membered Ga2O2 cyclic gallane dimer with Cp*(OC)2FeC(CH2)CH2CH2 substituents on the oxygen atoms, namely [Cp*(OC)2FeC(CH2)CH2CH2OGaMes2]2 (7). In addition, the bond cleavage reaction occurred by the reaction of 1 with allyl methyl ether to afford the (η3-allyl)iron complex Cp*(OC)Fe(η3-CH2CHCH2) (8) and 3. These results indicate that the existence of the -CC-C-OR fragment, regardless of the presence or absence of the CO group between the CC and OR fragments, is essential for the bond cleavage reaction.

Mist chemical vapor deposition of crystalline MoS2atomic layer films using sequential mist supply mode and its application in field-effect transistors.

Molybdenum disulfide (MoS2) mono/bilayer have been systematically investigated using atmospheric-pressure mist chemical vapor deposition (mist CVD) from (NH4)2MoS4dissolved in N-methyl-2-pyrrolidone as a precursor. Film deposition was performed by alternating MoS2mist storage within a closed chamber and mist exhaust, i.e. sequential mist supply mode at different furnace temperatures, storage times of precursor, and repetition cycles of mist supply on thermally grown SiO2(th-SiO2) and mist-CVD grown Al1-xTixOy(ATO) layers coated on p+-Si substrates. The average size of the MoS2flake and their number of stack layers could be controlled by tuning the deposition parameters combined with substrate pretreatment. Field-effect transistors with MoS2atomic mono/bilayer as a channel layer exhibited mobility up to 31-40 (43-55) cm2V-1s-1with a threshold voltage of -1.6 (-0.5) V, subthreshold slope of 0.8 (0.11) V dec.-1, and on/off ratio of 3.2 × 104(3.6 × 105) onth-SiO2(ATO) layers as gate dielectric layers without mechanical exfoliation. These findings imply that mist CVD is available for the synthesis of metal transition metal dichalcogenide and metal oxide layers as channel and gate dielectric layers, respectively.

Material and Device Structure Designs for 2D Memory Devices Based on the Floating Gate Voltage Trajectory.

Two-dimensional heterostructures have been extensively investigated as next-generation nonvolatile memory (NVM) devices. In the past decade, drastic performance improvements and further advanced functionalities have been demonstrated. However, this progress is not sufficiently supported by the understanding of their operations, obscuring the material and device structure design policy. Here, detailed operation mechanisms are elucidated by exploiting the floating gate (FG) voltage measurements. Systematic comparisons of MoTe2, WSe2, and MoS2 channel devices revealed that the tunneling behavior between the channel and FG is controlled by three kinds of current-limiting paths, i.e., tunneling barrier, 2D/metal contact, and p-n junction in the channel. Furthermore, the control experiment indicated that the access region in the device structure is required to achieve 2D channel/FG tunneling by preventing electrode/FG tunneling. The present understanding suggests that the ambipolar 2D-based FG-type NVM device with the access region is suitable for further realizing potentially high electrical reliability.

Twist Angle-Dependent Interlayer Exciton Lifetimes in van der Waals Heterostructures.

In van der Waals (vdW) heterostructures formed by stacking two monolayers of transition metal dichalcogenides, multiple exciton resonances with highly tunable properties are formed and subject to both vertical and lateral confinement. We investigate how a unique control knob, the twist angle between the two monolayers, can be used to control the exciton dynamics. We observe that the interlayer exciton lifetimes in MoSe_{2}/WSe_{2} twisted bilayers (TBLs) change by one order of magnitude when the twist angle is varied from 1° to 3.5°. Using a low-energy continuum model, we theoretically separate two leading mechanisms that influence interlayer exciton radiative lifetimes. The shift to indirect transitions in the momentum space with an increasing twist angle and the energy modulation from the moiré potential both have a significant impact on interlayer exciton lifetimes. We further predict distinct temperature dependence of interlayer exciton lifetimes in TBLs with different twist angles, which is partially validated by experiments. While many recent studies have highlighted how the twist angle in a vdW TBL can be used to engineer the ground states and quantum phases due to many-body interaction, our studies explore its role in controlling the dynamics of optically excited states, thus, expanding the conceptual applications of "twistronics".

Enhanced Exciton-Exciton Collisions in an Ultraflat Monolayer MoSe2 Prepared through Deterministic Flattening.

Squeezing bubbles and impurities out of interlayer spaces by applying force through a few-layer graphene capping layer leads to van der Waals heterostructures with the ultraflat structure free from random electrostatic potential arising from charged impurities. Without the graphene capping layer, a squeezing process with an AFM tip induces applied-force-dependent charges of Δn ∼ 2 × 1012 cm-2 µN-1, resulting in the significant intensity of trions in photoluminescence spectra of MoSe2 at low temperature. We found that a hBN/MoSe2/hBN prepared with the "graphene-capping-assisted AFM nano-squeezing method" shows a strong excitonic emission with negligible trion peak, and the residual line width of the exciton peak is only 2.2 meV, which is comparable to the homogeneous limit. Furthermore, in this high-quality sample, we found that the formation of biexciton occurs even at extremely low excitation power (Φph ∼ 2.3 × 1019 cm-2 s-1) due to the enhanced collisions between excitons.

Understanding the Memory Window Overestimation of 2D Materials Based Floating Gate Type Memory Devices by Measuring Floating Gate Voltage.

The memory window of floating gate (FG) type non-volatile memory (NVM) devices is a fundamental figure of merit used not only to evaluate the performance, such as retention and endurance, but also to discuss the feasibility of advanced functional memory devices. However, the memory window of 2D materials based NVM devices is historically determined from round sweep transfer curves, while that of conventional Si NVM devices is determined from high and low threshold voltages (Vth s), which are measured by single sweep transfer curves. Here, it is elucidated that the memory window of 2D NVM devices determined from round sweep transfer curves is overestimated compared with that determined from single sweep transfer curves. The floating gate voltage measurement proposed in this study clarifies that the Vth s in round sweep are controlled not only by the number of charges stored in floating gate but also by capacitive coupling between floating gate and back gate. The present finding on the overestimation of memory window enables to appropriately evaluate the potential of 2D NVM devices.

All 2D Heterostructure Tunnel Field-Effect Transistors: Impact of Band Alignment and Heterointerface Quality.

Van der Waals heterostructures are the ideal material platform for tunnel field-effect transistors (TFETs) because a band-to-band tunneling (BTBT) dominant current is feasible at room temperature (RT) because of ideal, dangling bond-free heterointerfaces. However, achieving subthreshold swing (SS) values lower than 60 mV dec-1 of the Boltzmann limit is still challenging. In this work, we systematically studied the band alignment and heterointerface quality in n-MoS2 channel heterostructure TFETs. By selecting a p+-MoS2 source with a sufficiently high doping level, stable gate modulation to a type III band alignment was achieved regardless of the number of MoS2 channel layers. For the gate stack formation, it was found that the deposition of Al2O3 as the top gate introduces defect states for the generation current under reverse bias, while the integration of a hexagonal boron nitride (h-BN) top gate provides a defect-free, clean interface, resulting in the BTBT dominant current even at RT. All 2D heterostructure TFETs produced by combining the type III n-MoS2/p+-MoS2 heterostructure with the h-BN top-gate insulator resulted in low SS values at RT.

Facile and Reversible Carrier-Type Manipulation of Layered MoTe2 Toward Long-Term Stable Electronics.

Flexible manipulation of the carrier transport behaviors in two-dimensional materials determines their values of practical application in logic circuits. Here, we demonstrated the carrier-type manipulation in field-effect transistors (FETs) containing α-phase molybdenum ditelluride (MoTe2) by a rapid thermal annealing (RTA) process in dry air for hole-dominated and electron-beam (EB) treatment for electron-dominated FETs. EB treatment induced a distinct shift of the transfer curve by around 135 V compared with that of the FET-processed RTA treatment, indicating that the carrier density of the EB-treated FET was enhanced by about 1 order of magnitude. X-ray photoelectron spectroscopy analysis revealed that the atomic ratio of Te decreased from 66.4 to 60.8% in the MoTe2 channel after EB treatment. The Fermi level is pinned near the new energy level resulting from the Te vacancies produced by the EB process, leading to the electron-dominant effect of the MoTe2 FET. The electron-dominated MoTe2 FET showed excellent stability for more than 700 days. Thus, we not only realized the reversible modulation of carrier-type in layered MoTe2 FETs but also demonstrated MoTe2 channels with desirable performance, including long-term stability.

Decreased expression of fructosyltransferase genes in asparagus roots may contribute to efficient fructan degradation during asparagus spear harvesting.

Asparagus (Asparagus officinalis L.) accumulates inulin and inulin neoseries-type fructans in root, which are synthesized by three fructosyltransferases-sucrose:sucrose 1-fructosyltransferase (1-SST, EC 2.4.1.99), fructan:fructan 1-fructosyltransferase (1-FFT, EC 2.4.1.100), and fructan:fructan 6G-fructosyltransferase (6G-FFT, EC 2.4.1.243). Fructans in roots are considered as energy sources for emerging of spears, and it has been demonstrated that a gradual decrease in root fructan content occurs during the spear harvesting season (budding and shooting up period). However, the roles of certain three fructosyltransferases during the harvest season have not yet been elucidated. Here, we investigated the variation in enzymatic activities and gene expression levels of three fructosyltransferases and examined sugar contents in roots before and during the spear harvest period. Two cDNAs, aoft2 and aoft3, were isolated from the cDNA library of roots. The respective recombinant proteins (rAoFT2 and rAoFT3), produced by Pichia pastoris, were characterized: rAoFT2 showed 1-FFT activity (producing nystose from 1-kestose), whereas rAoFT3 showed 1-SST activity (producing 1-kestose from sucrose). These reaction profiles of recombinant proteins were similar to those of native enzymes purified previously. These results indicate that aoft2 and aoft3 encoding 1-FFT and 1-SST are involved in fructan synthesis in roots. A gradual downregulation of fructosyltransferase genes and activity of respective enzymes was observed in roots during the harvest period, which also coincided with the decrease in fructooligosaccharides and increase in fructose due to fructan exohydrolase activity. These findings suggest that downregulation of fructosyltransferases genes during harvest time may contribute to efficient degradation of fructan required for the emergence of spears.

Synthesis, structure, and reactivity of a pyridine-stabilized silanonetungsten complex.

A pyridine-stabilized silanonetungsten complex Cp*(OC)2W{O[double bond, length as m-dash]SiMes2(py)}(SiMe3) (1b, Cp* = η5-C5Me5, Mes = 2,4,6-Me3C6H2, py = C5H5N) was obtained by the reaction of a silyl(silylene) complex Cp*(OC)2W([double bond, length as m-dash]SiMes2)(SiMe3) (3) with pyridine-N-oxide in pyridine. X-ray crystal structure determination revealed that complex 1b shows a similar geometry to that observed for a previously synthesized DMAP-stabilized analogue, Cp*(OC)2W{O[double bond, length as m-dash]SiMes2(DMAP)}(SiMe3) (1a, DMAP = 4-NMe2C6H4N). The Si[double bond, length as m-dash]O and W-O bond distances in 1b are comparable to those observed in 1a, but the nitrogen to silicon coordination bond of 1b is slightly longer (ca. 0.05 Å) than that of 1a, indicating the weaker coordination of pyridine than that of DMAP. The reaction of 1b with excess PMe3 in C6D6 at r. t. proceeded via elimination of pyridine to afford a five-membered metallacyclic carbene complex, Cp*(OC)W([double bond, length as m-dash]C(SiMe3)OSiMes2O)(PMe3) (5), but that of 1a with PMe3 did not proceed at all. Complex 5 was further transformed in C7D8 at 100 °C for 4 h to give a four-membered W-O-Si-O metallacyclic complex with carbyne and PMe3 ligands, Cp*W(OSiMes2O)([triple bond, length as m-dash]CSiMe3)(PMe3) (7). The structural features of complexes 1b, 5, and 7 are comparable to those suggested theoretically as intermediates in the reaction of 3 with a sulfuration reagent to afford a six-membered metallacyclic carbene complex, Cp*W(S){[double bond, length as m-dash]C(SiMe3)C([double bond, length as m-dash]O)OSiMes2S} (6), indicating that complex 1b and the theoretically proposed silanethione complex are transformed via a similar reaction pathway.

Investigation of laser-induced-metal phase of MoTe2 and its contact property via scanning gate microscopy.

Although semiconductor to metal phase transformation of MoTe2 by high-density laser irradiation of more than 0.3 MW cm-2 has been reported, we reveal that the laser-induced-metal (LIM) phase is not the 1T' structure derived by a polymorphic-structural phase transition but consists instead of semi-metallic Te induced by photo-thermal decomposition of MoTe2. The technique is used to fabricate a field effect transistor with a Pd/2H-MoTe2/LIM structure having an asymmetric metallic contact, and its contact properties are studied via scanning gate microscopy. We confirm that a Schottky barrier (a diffusion potential) is always formed at the Pd/2H-MoTe2 boundary and obstacles a carrier transport while an Ohmic contact is realized at the 2H-MoTe2/LIM phase junction for both n- and p-type carriers.

Oxygen-Sensitive Layered MoTe2 Channels for Environmental Detection.

The oxygen (O2)-dependent resistance change of multilayered molybdenum ditelluride (MoTe2) channels was characterized. A variation of the channel resistance could reproducibly determine relative O2 content (denoted as the O2 index). We found that Joule heating in a layered MoTe2 field-effect transistor caused the O2 index to decrease drastically from 100 to 12.1% in back gate modulation. Furthermore, Joule heating caused effective O2 desorption from the MoTe2 surface and repeatable O2 detection by multilayered MoTe2 channels was realized. This work not only explored the influence of O2 on the electrical properties of multilayered MoTe2 channels but also revealed that MoTe2 channels are promising for sensing O2 in an environmental condition.

Barrier Formation at the Contacts of Vanadium Dioxide and Transition-Metal Dichalcogenides.

Phase-transition field-effect transistors (FETs) are a class of steep-slope devices that show abrupt on/off switching owing to the metal-insulator transition (MIT) induced in the contacting materials. An important avenue to develop phase-transition FETs is to understand the charge injection mechanism at the junction of the contacting MIT materials and semiconductor channels. Here, toward the realization of high-performance phase-transition FETs, we investigate the contact properties of heterojunctions between semiconducting transition-metal dichalcogenides (TMDCs) and vanadium dioxide (VO2) that undergoes a MIT at a critical temperature (Tc) of approximately 340 K. We fabricated transistors based on molybdenum disulfide (MoS2) and tungsten diselenide (WSe2) in contact with the VO2 source/drain electrodes. The VO2-contacted MoS2 transistor exhibited n-type transport both below and above Tc. Across the MIT, the on-current was observed to increase only by a factor of 5, in contrast to the order-of-magnitude change in the resistance of the VO2 electrodes, suggesting the existence of high contact resistance. The Arrhenius analyses of the gate-dependent drain current confirmed the formation of the interfacial barrier at the VO2/MoS2 contacts, irrespective of the phase state of VO2. The VO2-contacted WSe2 transistor showed ambipolar transport, indicating that the Fermi level lies near the mid gap of WSe2. These observations provide insights into the contact properties of phase-transition FETs based on VO2 and TMDCs and suggest the need for contact engineering for high-performance operations.