RESUMO
Interlayer electronic coupling in two-dimensional materials enables tunable and emergent properties by stacking engineering. However, it also results in significant evolution of electronic structures and attenuation of excitonic effects in two-dimensional semiconductors as exemplified by quickly degrading excitonic photoluminescence and optical nonlinearities in transition metal dichalcogenides when monolayers are stacked into van der Waals structures. Here we report a van der Waals crystal, niobium oxide dichloride (NbOCl2), featuring vanishing interlayer electronic coupling and monolayer-like excitonic behaviour in the bulk form, along with a scalable second-harmonic generation intensity of up to three orders higher than that in monolayer WS2. Notably, the strong second-order nonlinearity enables correlated parametric photon pair generation, through a spontaneous parametric down-conversion (SPDC) process, in flakes as thin as about 46 nm. To our knowledge, this is the first SPDC source unambiguously demonstrated in two-dimensional layered materials, and the thinnest SPDC source ever reported. Our work opens an avenue towards developing van der Waals material-based ultracompact on-chip SPDC sources as well as high-performance photon modulators in both classical and quantum optical technologies1-4.
RESUMO
Liquid methanol has the potential to be the hydrogen energy carrier and storage medium for the future green economy. However, there are still many challenges before zero-emission, affordable molecular H2 can be extracted from methanol with high performance. Here, we present noble-metal-free Cu-WC/W plasmonic nanohybrids which exhibit unsurpassed solar H2 extraction efficiency from pure methanol of 2,176.7 µmol g-1 h-1 at room temperature and normal pressure. Macro-to-micro experiments and simulations unveil that local reaction microenvironments are generated by the coperturbation of WC/W's lattice strain and infrared-plasmonic electric field. It enables spontaneous but selective zero-emission reaction pathways. Such microenvironments are found to be highly cooperative with solar-broadband-plasmon-excited charge carriers flowing from Cu to WC surfaces for efficient stable CH3OH plasmonic reforming with C3-dominated liquid products and 100% selective gaseous H2. Such high efficiency, without any COx emission, can be sustained for over a thousand-hour operation without obvious degradation.
RESUMO
Owing to its inherent non-trivial geometry, the unique structural motif of the recently discovered Kagome topological superconductor AV3 Sb5 (A = K, Rb, Cs) is an ideal host of diverse topologically non-trivial phenomena, including giant anomalous Hall conductivity, topological charge order, charge density wave (CDW), and unconventional superconductivity. Despite possessing a normal-state CDW order in the form of topological chiral charge order and diverse superconducting gaps structures, it remains unclear how fundamental atomic-level properties and many-body effects including Fermi surface nesting, electron-phonon coupling, and orbital hybridization contribute to these symmetry-breaking phenomena. Here, we report the direct participation of the V3d-Sb5p orbital hybridization in mediating the CDW phase transition in CsV3 Sb5 . The combination of temperature-dependent X-ray absorption and first-principles studies clearly indicate the Inverse Star of David structure as the preferred reconstruction in the low-temperature CDW phase. Our results highlight the critical role that Sb orbitals plays and establish orbital hybridization as the direct mediator of the CDW states and structural transition dynamics in Kagome unconventional superconductors. This is a significant step towards the fundamental understanding and control of the emerging correlated phases from the Kagome lattice through the orbital interactions and provide promising approaches to novel regimes in unconventional orders and topology. This article is protected by copyright. All rights reserved.
RESUMO
The kagome lattice has attracted intense interest with the promise of realizing topological phases built from strongly interacting electrons. However, fabricating two-dimensional (2D) kagome materials with nontrivial topology is still a key challenge. Here, we report the growth of single-layer iron germanide kagome nanoflakes by molecular beam epitaxy. Using scanning tunneling microscopy/spectroscopy, we unravel the real-space electronic localization of the kagome flat bands. First-principles calculations demonstrate the topological band inversion, suggesting the topological nature of the experimentally observed edge mode. Apart from the intrinsic topological states that potentially host chiral edge modes, the realization of kagome materials in the 2D limit also holds promise for future studies of geometric frustration.
RESUMO
Ferroelectric materials play an important role in a wide spectrum of semiconductor technologies and device applications. Two-dimensional (2D) van der Waals (vdW) ferroelectrics with surface-insensitive ferroelectricity that is significantly different from their traditional bulk counterparts have further inspired intensive interest. Integration of ferroelectrics into 2D-layered-material-based devices is expected to offer intriguing working principles and add desired functionalities for next-generation electronics. Herein, fundamental properties of ferroelectric materials that are compatible with 2D devices are introduced, followed by a critical review of recent advances on the integration of ferroelectrics into 2D devices. Representative device architectures and corresponding working mechanisms are discussed, such as ferroelectrics/2D semiconductor heterostructures, 2D ferroelectric tunnel junctions, and 2D ferroelectric diodes. By leveraging the favorable properties of ferroelectrics, a variety of functional 2D devices including ferroelectric-gated negative capacitance field-effect transistors, programmable devices, nonvolatile memories, and neuromorphic devices are highlighted, where the application of 2D vdW ferroelectrics is particularly emphasized. This review provides a comprehensive understanding of ferroelectrics-integrated 2D devices and discusses the challenges of applying them into commercial electronic circuits.
RESUMO
Exciton is a bosonic quasiparticle consisting of a pair of electron and hole, with promising potentials for optoelectronic device applications, such as exciton transistors, photodetectors and light emitting devices. However, the charge-neutral nature of excitons renders them challenging to manipulate using electronics. Here we present the generation of trions, a form of charged excitons, together with enhanced exciton resonance in monolayer WSe2. The excitation of the trion quasiparticles is achieved by the hot carrier transport from the integrated gold plasmonic nanocavity, formed by embedding monolayer WSe2 between gold nanoparticles and a gold film. The nanocavity-induced negatively charged trions provide a promising route for the manipulation of excitons, essential for the construction of all-exciton information processing circuits.
RESUMO
Polycyclic hydrocarbons (PHs) share the same hexagonal structure of sp2 carbons as graphene but possess an energy gap due to quantum confinement effect. PHs can be synthesized by a bottom-up strategy starting from small building blocks covalently bonded into large 2D organic sheets. Further investigation of the role of the covalent bonding/coupling ways on their electronic properties is needed. Here, we demonstrate a surface-mediated synthesis of hexa-peri-hexabenzocoronene (HBC) and its extended HBC oligomers (dimers, trimers, and tetramers) via single- and triple-coupling ways and reveal the implication of different covalent bonding on their electronic properties. High-resolution low-temperature scanning tunneling microscopy and noncontact atomic force microscopy are employed to in situ determine the atomic structures of as-synthesized HBC oligomers. Scanning tunneling spectroscopy measurements show that the length extension of HBC oligomers narrows the energy gap between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO). Furthermore, the energy gaps of triple-coupling HBC oligomers are smaller and decrease more significantly than that of the single-coupling ones. We hypothesize that the triple coupling promotes a more effective delocalization of π-electrons than the single coupling, according to density functional theory calculations. We also demonstrate that the HBC oligomers can further extend across the substrate steps to achieve conjugated polymers and large-area porous carbon networks.
RESUMO
Complex correlated states emerging from many-body interactions between quasiparticles (electrons, excitons and phonons) are at the core of condensed matter physics and material science. In low-dimensional materials, quantum confinement affects the electronic, and subsequently, optical properties for these correlated states. Here, by combining photoluminescence, optical reflection measurements and ab initio theoretical calculations, we demonstrate an unconventional excitonic state and its bound phonon sideband in layered silicon diphosphide (SiP2), where the bound electron-hole pair is composed of electrons confined within one-dimensional phosphorus-phosphorus chains and holes extended in two-dimensional SiP2 layers. The excitonic state and emergent phonon sideband show linear dichroism and large energy redshifts with increasing temperature. Our ab initio many-body calculations confirm that the observed phonon sideband results from the correlated interaction between excitons and optical phonons. With these results, we propose layered SiP2 as a platform for the study of excitonic physics and many-particle effects.
RESUMO
Epitaxial growth is a powerful tool for synthesizing heterostructures and integrating multiple functionalities. However, interfacial mixing can readily occur and significantly modify the properties of layered structures, particularly for those containing energy storage materials with smaller cations. Here, we show a two-step sequence involving the growth of an epitaxial LiCoO2 cathode layer followed by the deposition of a binary transition metal oxide. Orientation-controlled epitaxial synthesis of the model solid-state-electrolyte Li2WO4 and anode material Li4Ti5O12 occurs as WO3 and TiO2 nucleate and react with Li ions from the underlying cathode. We demonstrate that this lithiation-assisted epitaxy approach can be used for energy materials discovery and exploring different combinations of epitaxial interfaces that can serve as well-defined model systems for mechanistic studies of energy storage and conversion processes.
RESUMO
Positive magnetoresistance (PMR) and negative magnetoresistance (NMR) describe two opposite responses of resistance induced by a magnetic field. Materials with giant PMR are usually distinct from those with giant NMR due to different physical natures. Here, we report the unusual photomagnetoresistance in the van der Waals heterojunctions of WSe2/quasi-two-dimensional electron gas, showing the coexistence of giant PMR and giant NMR. The PMR and NMR reach 1,007.5% at -9 T and -93.5% at 2.2 T in a single device, respectively. The magnetoresistance spans over two orders of magnitude on inversion of field direction, implying a giant unidirectional magnetoresistance (UMR). By adjusting the thickness of the WSe2 layer, we achieve the maxima of PMR and NMR, which are 4,900,000% and -99.8%, respectively. The unique magnetooptical transport shows the unity of giant UMR, PMR, and NMR, referred to as giant bipolar unidirectional photomagnetoresistance. These features originate from strong out-of-plane spin splitting, magnetic field-enhanced recombination of photocarriers, and the Zeeman effect through our experimental and theoretical investigations. This work offers directions for high-performance light-tunable spintronic devices.NMR).
RESUMO
2D platinum ditelluride (PtTe2) has received significant attention for 2D photodetector applications due to its novel physical properties. One of the critical factors that affect device performance is the film quality. Here, using molecular beam epitaxy, we investigate the role of growth temperature in determining the film quality of PtTe2 on highly oriented pyrolytic graphite, and unveil its layer-dependent electronic properties by X-ray photoelectron spectroscopy, Raman spectroscopy, and scanning tunneling microscopy/spectroscopy (STM/STS), as well as density functional theory (DFT) calculations. At low growth temperature (≤250 °C), the PtTe2 film prefers a stack of the monolayer and bilayer, while at ≈300 °C large-area continuous bilayer films are formed. In contrast, high growth temperature (>300 °C) leads to the formation of thick films with high Te deficiency and poor crystallinity. Theoretical calculations confirm the higher thermal stability of bilayer PtTe2 over other layer numbers above a critical crystal size of ≈100 nm2. STS shows that PtTe2 is a semiconductor in the monolayer with a bandgap of 0.80 ± 0.05 eV, and changes to a semimetal from the bilayer. DFT calculations support our experimental results and suggest an indirect bandgap structure of the monolayer. This work provides a systematic study of the layer-dependent electronic structure of 2D PtTe2, and demonstrates that with appropriate substrate and growth temperature choices, high-quality ultrathin PtTe2 films can be obtained, important for device applications.
RESUMO
Supramolecular self-assembly offers a possible pathway for nanopatterning and functionality. In particular, molecular tiling such as trihexagonal tiling (also known as the Kagome lattice) has promising chemical and physical properties. Distorted Kagome lattices are not well understood due to their complexity, and studies of their controllable fabrication are few. Here, by employing a conformationally flexible precursor, 2,4,6-tris(3-bromophenyl)-1,3,5-triazine (mTBPT), we demonstrate two-dimensional distorted Kagome lattice p3, (333) by supramolecular self-assembly and achieve tuning of the metastable phases, including the homochiral porous network and distorted Kagome lattice p3, (333) by steering deposition rates on a cold Ag(111) substrate. By a combination of scanning tunneling microscopy and density functional theory calculations, the distorted Kagome lattice is energetically unfavorable but can be trapped at a high deposition rate, and the process mainly depends on surface kinetics. This work using conformationally flexible mTBPT molecules provides a pathway for the controllable growth of different phases, including metastable Kagome lattices.
RESUMO
The transition metal dichalcogenide (TMD)-metal interfaces constitute an active part of TMD-based electronic devices with optimized performances. Despite their decisive role, current strategies for nanoscale electronic tuning remain limited. Here, we demonstrate electronic tuning in the WSe2/Au interface by twist engineering, capable of modulating the WSe2 carrier doping from an intrinsic p-type to n-type. Scanning tunneling microscope/spectroscopy gives direct evidence of enhanced interfacial interaction induced doping in WSe2 as the twist angle with respect to the topmost (100) lattice of gold changing from 15 to 0°. Taking advantage of the strong coupling interface achieved this way, we have moved a step further to realize an n-p-n-type WSe2 homojunction. The intrinsic doping of WSe2 can be recovered by germanium intercalation. Density functional theory calculations confirm that twist angle and intercalation-dependent charge transfer related doping are involved in our observations. Our work offers ways for electronically tuning the metal-2D semiconductor interface.
RESUMO
Heterointerfaces have led to the discovery of novel electronic and magnetic states because of their strongly entangled electronic degrees of freedom. Single-phase chromium compounds always exhibit antiferromagnetism following the prediction of the Goodenough-Kanamori rules. So far, exchange coupling between chromium ions via heteroanions has not been explored and the associated quantum states are unknown. Here, we report the successful epitaxial synthesis and characterization of chromium oxide (Cr_{2}O_{3})-chromium nitride (CrN) superlattices. Room-temperature ferromagnetic spin ordering is achieved at the interfaces between these two antiferromagnets, and the magnitude of the effect decays with increasing layer thickness. First-principles calculations indicate that robust ferromagnetic spin interaction between Cr^{3+} ions via anion-hybridization across the interface yields the lowest total energy. This work opens the door to fundamental understanding of the unexpected and exceptional properties of oxide-nitride interfaces and provides access to hidden phases at low-dimensional quantum heterostructures.
RESUMO
Quantum spin Hall (QSH) systems hold promises of low-power-consuming spintronic devices, yet their practical applications are extremely impeded by the small energy gaps. Fabricating QSH materials with large gaps, especially under the guidance of design principles, is essential for both scientific research and practical applications. Here, we demonstrate that large on-site atomic spin-orbit coupling can be directly exploited via the intriguing substrate-orbital-filtering effect to generate large-gap QSH systems and experimentally realized on the epitaxially synthesized ultraflat bismuthene on Ag(111). Theoretical calculations reveal that the underlying substrate selectively filters Bi pz orbitals away from the Fermi level, leading pxy orbitals with nonzero magnetic quantum numbers, resulting in large topological gap of â¼1 eV at the K point. The corresponding topological edge states are identified through scanning tunneling spectroscopy combined with density functional theory calculations. Our findings provide general strategies to design large-gap QSH systems and further explore their topology-related physics.
RESUMO
Thinning crystalline materials to two dimensions (2D) creates a rich playground for electronic phases, including charge, spin, superconducting, and topological order. Bulk materials hosting charge density waves (CDWs), when reduced to ultrathin films, have shown CDW enhancement and tunability. However, charge order confined to only 2D remains elusive. Here we report a distinct charge ordered state emerging in the monolayer limit of 1T-VSe2. Systematic scanning tunneling microscopy experiments reveal that bilayer VSe2 largely retains the bulk electronic structure, hosting a tridirectional CDW. However, monolayer VSe2 âconsistently across distinct substratesâexhibits a dimensional crossover, hosting two CDWs with distinct wavelengths and transition temperatures. Electronic structure calculations reveal that while one CDW is bulk-like and arises from the well-known Peierls mechanism, the other is decidedly unconventional. The observed CDW-lattice decoupling and the emergence of a flat band suggest that the second CDW could arise from enhanced electron-electron interactions in the 2D limit. These findings establish monolayer-VSe2 as a host of coexisting charge orders with distinct origins, and enable the tailoring of electronic phenomena via emergent interactions in 2D materials.
RESUMO
Van der Waals (vdW) heterojunctions, based on two-dimensional (2D) materials, have great potential for the development of ecofriendly and high-efficiency nanodevices, which shows valuable applications as photovoltaic cells, photodetectors, etc. However, the coexistence of photoelectric conversion and storage in a single device has not been achieved until now. Here, we demonstrate a simple strategy to construct a vdW p-n junction between a WSe_{2} layer and quasi-2D electron gas. After an optical illumination, the device stores the light-generated carriers for up to seven days, and then releases a very large photocurrent of 2.9 mA with bias voltage applied in darkness; this is referred to as chargeable photoconductivity (CPC), which completely differs from any previously observed photoelectric phenomenon. In normal photoconductivity, the recombination of electron-hole pairs occurs at the end of their lifetime; in contrast, infinite-lifetime photocarriers can be generated and stored in CPC devices without recombination. The photoelectric conversion and storage are completely self-excited during the charging process. The ratio between currents in full- and empty-photocarrier states below the critical temperature reaches as high as 10^{9}, with an external quantum efficiency of 93.8% during optical charging. A theoretical model developed to explain the mechanism of this effect is in good agreement with the experimental data. This work paves a path toward the high-efficiency devices for photoelectric conversion and storage.