Chitosan/dextran-based organohydrogel delivers EZH2 inhibitor to epigenetically reprogram chemo/immuno-resistance in unresectable metastatic melanoma.

Melanoma either intrinsically possesses resistance or rapidly acquires resistance to anti-tumor therapy, which often leads to local recurrence or distant metastasis after resection. In this study, we found histone 3 lysine 27 (H3K27) demethylated by an inhibitor of histone methyltransferase EZH2 could epigenetically reverse the resistance to chemo-drug paclitaxel (PTX), or enhance the efficacy of immune checkpoint inhibitor anti-TIGIT via downregulating TIGIT ligand CD155. Next, to address the complexity in the combination of multiple bioactive molecules with distinct therapeutic properties, we developed a polysaccharides-based organohydrogel (OHG) configured with a heterogenous network. Therein, hydroxypropyl chitosan (HPC)-stabilized emulsions for hydrophobic drug entrapment were crosslinked with oxidized dextran (Odex) to form a hydrophilic gel matrix to facilitate antibody accommodation, which demonstrated a tunable sustained release profile by optimizing emulsion/gel volume ratios. As results, local injection of OHG loaded with EZH2 inhibitor UNC1999, PTX and anti-TIGIT did not only synergistically enhance the cytotoxicity of PTX, but also reprogrammed the immune resistance via bi-directionally blocking TIGIT/CD155 axis, leading to the recruitment of cytotoxic effector cells into tumor and conferring a systemic immune memory to prevent lung metastasis. Hence, this polysaccharides-based OHG represents a potential in-situ epigenetic-, chemo- and immunotherapy platform to treat unresectable metastatic melanoma.

Flexible Artificial Tactility with Excellent Robustness and Temperature Tolerance Based on Organohydrogel Sensor Array for Robot Motion Detection and Object Shape Recognition.

Hydrogel-based flexible artificial tactility is equipped to intelligent robots to mimic human mechanosensory perception. However, it remains a great challenge for hydrogel sensors to maintain flexibility and sensory performances during cyclic loadings at high or low temperatures due to water loss or freezing. Here, a flexible robot tactility is developed with high robustness based on organohydrogel sensor arrays with negligent hysteresis and temperature tolerance. Conductive polyaniline chains are interpenetrated through a poly(acrylamide-co-acrylic acid) network with glycerin/water mixture with interchain electrostatic interactions and hydrogen bonds, yielding a high dissipated energy of 1.58 MJ m-3, and ultralow hysteresis during 1000 cyclic loadings. Moreover, the binary solvent provides the gels with outstanding tolerance from -100 to 60 °C and the organohydrogel sensors remain flexible, fatigue resistant, conductive (0.27 S m-1), highly strain sensitive (GF of 3.88) and pressure sensitive (35.8 MPa-1). The organohydrogel sensor arrays are equipped on manipulator finger dorsa and pads to simultaneously monitor the finger motions and detect the pressure distribution exerted by grasped objects. A machine learning model is used to train the system to recognize the shape of grasped objects with 100% accuracy. The flexible robot tactility based on organohydrogels is promising for novel intelligent robots.

Skin-like dual-network gelatin/chitosan/emodin organohydrogel sensors mediated by Hofmeister effect and Schiff base reaction.

Conductive gels have been extensively explored in the field of wearable electronics due to their excellent flexibility and deformability. Traditional gels constructed from synthetic networks pose risks to biosecurity due to residual monomers like acrylamide, while pure biological hydrogels are plagued by inadequate mechanical performance. This study explores an innovative strategy, employing a dual-network (DN) system with purely biological components, as a superior alternative to conventional synthetic networks. By integrating gelatin and chitosan, two natural polymers with inherent biocompatibility and advantageous biomedical properties, this approach successfully avoids the toxic risk of synthetic polymers. By utilizing emodin, a natural extract from Rheum officinale, as a cross-linking agent for chitosan by Schiff base reactions, and Hofmeister effect of gelatin induced by sodium carbonate, the DN gelatin/chitosan/emodin organohydrogels achieve ultrahigh tensile strength (up to 9.45 MPa), tunable moduli (ranging from 0.07 to 3.42 MPa), excellent toughness (∼9.64 MJ/m3), and high ionic conductivity (7.63 mS/cm). Remarkably, these conductive organohydrogels also exhibit high sensitivity (gauge factor up to 1.5) and ultrahigh linearity (R2 up to 0.9995), making them promising candidates for soft human-motion sensors capable of accurately detecting and monitoring human movements in real time with high sensitivity and durability.

An oil-in-gel type of organohydrogel loaded with methylprednisolone for the treatment of secondary injuries following spinal cord traumas.

The secondary injuries following traumatic spinal cord injury (SCI) is a multiphasic and complex process that is difficult to treat. Although methylprednisolone (MP) is the only available pharmacological regime for SCI treatment, its efficacy remains controversial due to its very narrow therapeutic time window and safety concerns associated with high dosage. In this study, we have developed an oil-in-gel type of organohydrogel (OHG) in which the binary oleic-water phases coexist, for the local delivery of MP. This new OHG is fabricated by a glycol chitosan/oxidized hyaluronic acid hydrophilic network that is uniformly embedded with a biocompatible oil phase, and it can be effectively loaded with MP or other hydrophobic compounds. In addition to spatiotemporally control MP release, this biodegradable OHG also provides a brain tissue-mimicking scaffold that can promote tissue regeneration. OHG remarkably decreases the therapeutic dose of MP in animals and extends its treatment course over 21 d, thereby timely manipulating microglia/macrophages and their associated with signaling molecules to restore immune homeostasis, leading to a long-term functional improvement in a complete transection SCI rat model. Thus, this OHG represents a new type of gel for clinical treatment of secondary injuries in SCI.

Heterogeneous Organohydrogel Toward Automated and Interference-Free Gradient Feeding of Drugs in Cell Screening.

Cell-based microarrays are widely used in the fields of drug discovery and toxicology. Precise gradient generation and automated drug feeding are essential for high-throughput screening of live cells in tiny droplets. However, most existing technologies either require sophisticated robotic equipment or cause mechanical/physiological interference with cells. Here, a heterogeneous organohydrogel is presented for automated gradient drug feeding, while ensuring minimal interference with cells. The heterogeneous organohydrogel comprises three crucial components. The bottom surface can automatically generate gradients functioning as a gradient generator, the organohydrogel bulk allows unidirectional transport of drugs without backflow, and the top surface with hydrophilic arrays can firmly anchor the cell-based droplet array to evaluate the concentration-dependent bioeffects of drugs accurately. Such a unique structure enables universal screening of different cell types and drugs dissolved in different solvents, requiring neither additional accessories nor arduous drug functionalization. The heterogeneous organohydrogel with unprecedented automation and non-interference possesses the enormous potential to be a next-generation platform for drug screening.

Cellulose nanocrystals-based optical organohydrogel fiber with customizable iridescent colors for strain and humidity response.

Stimuli-responsive optical hydrogels are widely used in various fields including environmental sensing, optical encryption, and intelligent display manufacturing. However, these hydrogels are susceptible to water losses when exposed to air, leading to structural damage, significantly shortened service lives, and compromised durability. This study presents mechanically robust, environmentally stable, and multi-stimuli responsive optical organohydrogel fibers with customizable iridescent colors. These fibers are fabricated by incorporating tunicate cellulose nanocrystals, alginate, and acrylamide in a glycerol-water binary system. The synthesized fibers exhibit high strength (1.38 MPa), moisture retention capabilities, and elastic properties. Furthermore, a sensor based on these fibers demonstrates high- and low-temperature resistance along with stimuli-responsive characteristics, effectively detecting changes in environmental humidity and strains. Moreover, the fiber sensor demonstrates continuous, repeatable, and quantitatively predictable moisture discoloration responses across a humidity range of 11 % and 98 %. During strain sensing, the optical-organohydrogel-based sensor demonstrates a large working strain (50 %) and excellent cycling stability, underscoring its potential for effectively monitoring a wide range of intricate human motions. Overall, the synthesized fibers and their simple fabrication method can elicit new avenues for numerous related applications including the large-scale implementation of advanced wearable technology.

Temperature-Tolerant Versatile Conductive Zwitterionic Nanocomposite Organohydrogel toward Multisensory Applications.

Conductive hydrogels (CHs) are emerging materials for next generation sensing systems in flexible electronics. However, the fabrication of competent CHs with excellent stretchability, adhesion, self-healing, photothermal conversion, multisensing, and environmental stability remains a huge challenge. Herein, a nanocomposite organohydrogel with the above features is constructed by in situ copolymerization of zwitterionic monomer and acrylamide in the existence of carboxylic cellulose nanofiber-carrying reduced graphene oxide (rGO) plus a solvent displacement strategy. The synergy of abundant dipole-dipole interactions and intermolecular hydrogen bonds enables the organohydrogel to exhibit high stretchability, strong adhesion, and good self-healing. The presence of glycerol weakens the formation of hydrogen bonds between water molecules, endowing the organohydrogel with excellent environmental stability (-40 to 60 °C) to adapt to different application scenarios. Importantly, the multimodal organohydrogel presents excellent sensing behavior, including a high gauge factor of 16.3 at strains of 400-1440% and a reliable thermal coefficient of resistance (-4.2 °C-1) over a wide temperature widow (-40 to 60 °C). Moreover, the organohydrogel displays a highly efficient and reliable photothermal conversion ability due to the favorable optical absorbing behavior of rGO. Notably, the organohydrogel can detect accurate human activities at ambient temperature, demonstrating potential applications in flexible intelligent electronics.

Wireless Sensor System Based on Organohydrogel Ionic Skin for Physiological Activity Monitoring.

Supermolecular hydrogel ionic skin (i-skin) linked with smartphones has attracted widespread attention in physiological activity detection due to its good stability in complex scenarios. However, the low ionic conductivity, inferior mechanical properties, poor contact adhesion, and insufficient freeze resistance of most used hydrogels limit their practical application in flexible electronics. Herein, a novel multifunctional poly(vinyl alcohol)-based conductive organohydrogel (PCEL5.0%) with a supermolecular structure was constructed by innovatively employing sodium carboxymethyl cellulose (CMC-Na) as reinforcement material, ethylene glycol as antifreeze, and lithium chloride as a water retaining agent. Thanks to the synergistic effect of these components, the PCEL5.0% organohydrogel shows excellent performance in terms of ionic conductivity (1.61 S m-1), mechanical properties (tensile strength of 70.38 kPa and elongation at break of 537.84%), interfacial adhesion (1.06 kPa to pig skin), frost resistance (-50.4 °C), water retention (67.1% at 22% relative humidity), and remoldability. The resultant PCEL5.0%-based i-skin delivers satisfactory sensitivity (GF = 1.38) with fast response (348 ms) and high precision under different deformations and low temperature (-25 °C). Significantly, the wireless sensor system based on the PCEL5.0% organohydrogel i-skin can transmit signals from physiological activities and sign language to a smartphone by Bluetooth technology and dynamically displays the status of these movements. The organohydrogel i-skin shows great potential in diverse fields of physiological activity detection, human-computer interaction, and rehabilitation medicine.

Acceleration of Wound Healing in Diabetic Rats through a Novel 3D Organo-Hydrogel Nanocomposite of Polydopamine/TiO2 Nanoparticles and Cu (PDA-TiO2@Cu).

BACKGROUND: Diabetic wound represents a serious issue with a substantial impact and an exceptionally complex pathology affecting patients' mental health and quality of life. So, we have developed a novel 3D organo-hydrogel nanocomposite of polydopamine/TiO2 nanoparticles and cu (PDA-TiO2@Cu) and examined its efficacy in diabetic wound healing. METHODS: Forty-five adult male albino rats were divided into normal control rats (non-diabetic rats with non-treated skin wounds), diabetic control rats (diabetic rats with non-treated skin wounds), and organo-hydrogel-treated rats (diabetic wounds treated with topically applied organo- hydrogel once daily). Macroscopic changes of the wound were observed on days 0, 3, 5, 7, and 10 to measure wound diameters. Skin specimens from the wound tissue were taken on days 3, 7, and 10, respectively, and examined histologically and immunohistochemically. Also, the gene expressions of collagen I, Matrix Metalloproteinase-9 (MMP-9), and Epidermal Growth Factor (EGF), and levels of Interleukin 6 (IL-6) and Superoxide Dismutase (SOD) were assessed. RESULTS: Our observed results indicated that the developed patch significantly accelerated the healing time compared to the normal control and diabetic control groups. Moreover, the patchloaded group revealed complete re-epithelization and a highly significant increase in the mean area % of CD31 immunostaining on day 7. The organo-hydrogel-loaded group displayed a significant decrease in gene expression of MMP-9 and a significant increase in gene expression of EGF and collagen I. Additionally, the organo-hydrogel-loaded group exhibited a significant decrease in levels of IL-6 and a significant increase in levels of SOD, compared to the normal diabetic control groups. CONCLUSION: The organo-hydrogel can be used for treating and decreasing the healing period of diabetic wounds.

CQDs-Cross-Linked Conductive Collagen/PAA-Based Nanocomposite Organohydrogel Coupling Flexibility with Multifunctionality for Dual-Modal Sensing of Human Motions.

Conductive hydrogels are ideal materials for intelligent medical devices, human-machine interfaces, and flexible bioelectrodes due to their adjustable mechanical properties and electrical responsiveness, whereas it is still a great challenge to achieve the integration of excellent flexibility and biocompatibility into one hydrogel sensor while also incorporating self-healing, self-adhesion, environmental tolerance, and antimicrobial properties. Here, a nanocomposite conductive organohydrogel was constructed by using collagen (Col), alginate-derived carbon quantum dots (OSA-CQDs), poly(acrylic acid) (PAA), ethylene glycol reduced AgNPs, and Fe3+ ions. Depending on OSA-CQDs with multiple chemical binding sites and high specific surface area as cross-linkers, while coupling highly biologically active Col chains and PAA chains are serving as an energy dissipation module, the resulting organohydrogel exhibited excellent flexibility (795% of strain, 193 kPa of strength), high cell compatibility (>95% survival rate), self-healing efficiency (HE = 79.5%), antifreezing (-20 °C), moisturizing (>120 h), repeatable adhesion (strength >20 kPa, times >10), inhibitory activity against Escherichia coli and Staphylococcus aureus (9 and 21.5 cm2), conductivity, and strain sensitivity (σ = 1.34 S/m, gauge factor (GF) = 11.63). Based on the all-in-one integration of multifunction, the organohydrogel can collaboratively adapt to the multimode of strain sensing and electrophysiological sensing to realize wireless real-time monitoring of human activities and physiological health. Therefore, this work provides a new and common platform for the design and sensing of next-generation hydrogel-based smart wearable sensors.

A Viscous-Biofluid Self-Pumping Organohydrogel Dressing to Accelerate Diabetic Wound Healing.

Viscous biofluids on wounds challenge conventional "water-absorbing" wound dressings in efficient drainage due to their poor fluidity, generally causing prolonged inflammation, anti-angiogenesis, and delayed wound closure. Herein, it is reported that a self-pumping organohydrogel dressing (SPD) with aligned hydrated hydrogel channels, prepared by a three-dimensional-templated wetting-enabled-transfer (3D-WET) polymerization process, can efficiently drain viscous fluids and accelerate diabetic wound healing. The asymmetric wettability of the hydrophobic-hydrophilic layers and aligned hydrated hydrogel channels enable unidirectional and efficient drainage of viscous fluids away from the wounds, preventing their overhydration and inflammatory stimulation. The organogel layer can adhere onto the skin around the wounds but can be easily detached from the wet wound area, avoiding secondary trauma to the newly formed tissues. Taking a diabetic rat model as an example, the SPD can significantly downregulate the inflammation response by ≈70.8%, enhance the dermal remodeling by ≈14.3%, and shorten wound closure time by about 1/3 compared with the commercial dressing (3M, Tegaderm hydrocolloid thin dressing). This study sheds light on the development of the next generation of functional dressings for chronic wounds involving viscous biofluids.

Tough and Strain-Sensitive Organohydrogels Based on MXene and PEDOT/PSS and Their Effects on Mechanical Properties and Strain-Sensing Performance.

Conductive hydrogels have shown promising application prospects in the field of flexible sensors, but they often suffer from poor mechanical properties, low sensitivity, and lack of frost resistance. Herein, we report a tough, highly sensitive, and antifreeze strain sensor assembled from a conductive organohydrogel composed of a dual-cross-linked polyacrylamide and poly(vinyl alcohol) (PVA) network, as well as MXene nanosheets as nanofillers and poly(3,4-ethylenedioxythiophene)-doped poly(styrenesulfonate) (PEDOT/PSS) as the main conducting component (PPMP-OH organohydrogel). The tensile strength and toughness of PPMP-OH had been greatly enhanced by MXene nanosheets due to the mechanical reinforcement of MXene nanosheets, as well as various strong noncovalent interactions formed in the organohydrogels. The PPM1P-OH organohydrogels showed a tensile strength of 1.48 MPa at 772% and a toughness of 5.59 MJ/m3. Moreover, the conductivity and strain-sensing performance of PPMP-OH were significantly improved by PEDOT/PSS, which can form hydrogen bonds with PVA and electrostatic interactions with MXene. This was greatly beneficial for constructing a uniformly distributed and stable 3D conductive network and helped to obtain strain-dependent resistance of PPMP-OH. The strain sensors assembled from PPMP1-OH exhibited a high sensitivity of 5.16, a wide range of detectable strains up to 500%, and a short response time of 122 ms, which can effectively detect various physiological activities of the human body with high stability. In addition, the corresponding pressure sensor array also showed high sensitivity in identifying pressure magnitude and position.

Frost-resistant nanocellulose-based organohydrogel with high mechanical strength and transparency.

Improving mechanical strength and frost-resistance is an important research direction in the field of hydrogel materials. Herein, using bacterial nanocellulose (BC) as a reinforcing agent and polyvinyl alcohol (PVA) as a polymer matrix, a frost-resistant organohydrogel was constructed via the freezing-thawing method in a new binary solvent system of N, N-dimethylformamide and water (DMF-H2O), which was designed according to the Hansen Solubility Parameter. Owing to the solvent-induced crystallization effect that led to the enhanced 3D hydrogen bonding network during the freezing-thawing process, the optimal organohydrogel achieved excellent mechanical properties with the tensile strength of 2,974 kPa and the stretchability of 277 % at room temperature, respectively. In the visiblelight range, the organohydrogel demonstrated high transmittance. Moreover, the presence of a DMF-H2O binary solvent endows it with frost-resistance, retaining the tensile strength of 508 kPa and a stretchability of 190 % even at -70 °C, respectively. This kind of transparent, frost-resistant organohydrogel has potential uses in harsh settings due to its great mechanical strength.

Tough, Antifreezing, and Piezoelectric Organohydrogel as a Flexible Wearable Sensor for Human-Machine Interaction.

Piezoelectric hydrogel sensors are becoming increasingly popular for wearable sensing applications due to their high sensitivity, self-powered performance, and simple preparation process. However, conventional piezoelectric hydrogels lack antifreezing properties and are thus confronted with the liability of rupture in low temperatures owing to the use of water as the dispersion medium. Herein, a kind of piezoelectric organohydrogel that integrates piezoelectricity, low-temperature tolerance, mechanical robustness, and stable electrical performance is reported by using poly(vinylidene fluoride) (PVDF), acrylonitrile (AN), acrylamide (AAm), p-styrenesulfonate (NaSS), glycerol, and zinc chloride. In detail, the dipolar interaction of the PVDF chain with the PAN chain facilitates the crystal phase transition of PVDF from the α to ß phase, which endows the organohydrogels with a high piezoelectric constant d33 of 35 pC/N. In addition, the organohydrogels are highly ductile and can withstand significant tensile and compressive forces through the synergy of the dipolar interaction and amide hydrogen bonding. Besides, by incorporating glycerol and zinc chloride, the growth of ice crystals is inhibited, allowing the organohydrogels to maintain stable flexibility and sensitivity even at -20 °C. The real-time monitoring of the pulse signal for up to 2 min indicates that the gel sensor has stable sensitivity. It is believed that our organohydrogels will have good prospects in future wearable electronics.

Secondary Chemical Cross-Linking to Improve Mechanical Properties in a Multifaceted Biocompatible Strain Sensor.

A new conductive and transparent organohydrogel is developed with high stretchability, excellent mechanical, self-healing, antifreezing, and adhesive properties. A simple one-pot polymerization method is used to create polyacrylamide cross-linked through N,N'-methylenebis(acrylamide) (MBAA) and divinylbenzene (DVB). The dual chemical cross-linked gel network is complemented by several physical cross-links via hydrogen bonding and π-π interaction. Multiple chemical and physical cross-links are used to construct the gel network that allows toughness (171 kPa), low modulus (≈45 kPa), excellent stretchability (>1100%), and self-healing ability. The use of appropriate proportions of the water/glycerol binary solvent system ensures efficient environment tolerance (-20 to 40 °C). Phytic acid is used as a conductive filler that provides excellent conductivity and contributes to the physical cross-linking. Dopamine is incorporated in the gel matrix, which endows excellent adhesive property of the gel. The organohydrogel-based strain sensors are developed with state-independent properties, highly linear dependence, and excellent antifatigue performance (>100 cycles). Moreover, during the practical wearable sensing tests, human motions can be detected, including speaking, smiling, and joint movement. Additionally, the sensor is biocompatible, indicating the potential applications for the next generation of epidermal sensors.

Unlocking the Power of Multicatalytic Synergistic Transformation: toward Environmentally Adaptable Organohydrogel.

A sustainable and efficient multicatalytic chemical transformation approach is devised for the development of all-biobased environmentally adaptable polymers and gels with multifunctional properties. The catalytic system, utilizing Lignin aluminum nanoparticles (AlNPs)-aluminum ions (Al3+ ), synergistically combines multiple catalytic cycles to create robust, mechanically stable, and versatile organohydrogels. Single catalytic cycles alone fail to achieve desired results, highlighting the importance of cooperatively combining different cycles for successful outcomes. The transformation involves free radical crosslinking, reversible quinone-catechol reactions, and an autocatalytic mechanism, resulting in a dual crosslinking strategy that incorporates both covalent and ionic crosslinking. This approach creates a dynamic gel system with combined energy dissipation and storage mechanisms. The engineered organohydrogels demonstrate vital multifunctionalities such as good thermal stability, self-healing, and adhesive properties, flame-retardancy, mechanical resilience and durability, conductivity, viscoelastic properties, environmental adaptability, and resistance to extreme conditions such as freezing and drying. The developed catalytic technology and resulting gels hold significant potential for applications in flexible electronics, energy storage, actuators, and sensors.

SiC and N, S-doped carbon nanosheets and lignin-enhanced organohydrogel for low-temperature tolerant solid-state supercapacitors.

The rational design of porous carbon materials and hydrogel electrolytes with excellent mechanical properties and low-temperature tolerance are significance for the development of flexible solid-state supercapacitors. In this study, we introduce a novel methodology for synthesizing SiC/N, S-doped porous carbon nanosheets from bamboo pulp red liquor (RL). We leverage the SiO2 and the sodium salt in RL as templates and sodium lignosulfonate as sulfur dopants for the pyrolysis process and use NH4Cl as a nitrogen dopant. This innovative approach results in a material with a remarkable specific surface area of 1659.19 m2 g-1, a specific capacitance of 308 F g-1 at a current density of 1 A g-1 and excellent stability. Additionally, we harness alkali lignin extracted from RL to enhance a poly (vinyl alcohol) (PVA) matrix, creating a gel electrolyte with low-temperature tolerance and outstanding mechanical properties. A flexible solid-state supercapacitor, which incorporates our electrodes and gel electrolyte, demonstrates high energy density (5.2 W h kg-1 at 251 W kg-1 power density). Impressively, it maintains 82 % of its capacitance over 10,000 cycles of charge and discharge. This provides a new solution for the development of flexible solid-state supercapacitors.

Polyvinyl alcohol/chitosan based nanocomposite organohydrogel flexible wearable strain sensors for sports monitoring and underwater communication rescue.

Hydrogel-based flexible wearable sensors have garnered significant attention in recent years. However, the use of hydrogel, a biomaterial known for its high toughness, environmental friendliness, and frost resistance, poses a considerable challenge. In this study, we propose a stepwise construction and multiple non-covalent interaction matching strategy to successfully prepare dynamically physically crosslinked multifunctional conductive hydrogels. These hydrogels self-assembled to form a rigid crosslinked network through intermolecular hydrogen bonding and metal ion coordination chelation. Furthermore, the freeze-thawing process promoted the formation of poly(vinyl alcohol) microcrystalline domains within the amorphous hydrogel network system, resulting in exceptional mechanical properties, including a tensile strength (2.09 ± 0.01 MPa) and elongation at break of 562 ± 12 %. It can lift 10,000 times its own weight. Additionally, these hydrogels exhibit excellent resistance to swelling and maintain good toughness even at temperatures as low as -60 °C. As a wearable strain sensor with remarkable sensing ability (GF = 1.46), it can be effectively utilized in water and underwater environments. Moreover, it demonstrates excellent antimicrobial properties against Escherichia coli (Gram-negative bacteria). Leveraging its impressive sensing ability, we combine signal recognition with a deep learning model by incorporating Morse code for encryption and decryption, enabling information transmission.

Organohydrogels with cellulose nanofibers enhanced supramolecular interactions toward high performance self-adhesive sensing pads.

Gel materials with tailored functions and tissue-like properties have gained significant interest in emerging applications, including tissue engineering scaffolds, flexible electronics, and soft robotics. In this work, we developed a stretchable, flexible, adhesive, and conductive organohydrogel through physical cross-linking of the poly (N-[tris (hydroxymethyl) methyl] acrylamide-co-acrylamide) (denoted as P(THMA-AM)) network in the presence of cellulose nanofiber (CNF), sodium chloride, and glycerol. The gel matrix is rich in intermolecular interactions, including hydrogen bonding and ionic interactions, which contribute to a highly compact and cohesive structure without the requirement of any chemical crosslinkers. Moreover, the plasticizing effect of glycerol can mitigate the self-entanglement of CNFs, enhancing their mobility and ultimately conferring the organohydrogel with exceptional stretchability and flexibility. The resulting organohydrogel exhibited superior mechanical properties, self-adhesion, and ionic conductivity, making it an excellent candidate for strain-sensing applications, particularly in distinguishing and monitoring human movements.

Self-Healable, Adhesive, Anti-Drying, Freezing-Tolerant, and Transparent Conductive Organohydrogel as Flexible Strain Sensor, Triboelectric Nanogenerator, and Skin Barrier.

Conductive hydrogels have attracted tremendous interest in the construction of flexible strain sensors and triboelectric nanogenerators (TENGs) owing to their good stretchability and adjustable properties. Nevertheless, how to simultaneously achieve high transparency, self-healing, adhesion, antibacterial, anti-freezing, anti-drying, and biocompatibility properties through a simple method remains a challenge. Herein, a transparent, freezing-tolerant, and multifunctional organohydrogel (PAOAM-PDO) as electrode for strain sensors and TENGs was constructed through a free radical polymerization in the 1,3-propanediol (PDO)/water binary solvent system, in which oxide sodium alginate, aminated gelatin, acrylic acid, and AlCl3 were used as raw materials. The obtained PAOAM-PDO exhibited good transparency (>90%), self-healing, adhesiveness, antibacterial property, good conductivity (1.13 S/m), and long-term environmental stability. The introduction of PDO endowed PAOAM-PDO with freezing resistance with a low freezing point of -60 °C, and PAOAM-PDO could serve as a protective skin barrier to prevent frostbite at low temperature. PAOAM-PDO could be assembled as strain sensors to monitor heterogeneous human movements with high strain sensitivity (gauge factor of 7.05, strain = 233%). Meanwhile, PAOAM-PDO could be further fabricated as a TENG with a "sandwich" structure in single electrode mode. Moreover, the resulting TENG achieved electrical outputs with simple hand tapping and served as a self-powered device to light light-emitting diodes. This work displays a feasible strategy to build environment-tolerant and multifunctional organohydrogels, which possess potential applications in the wearable electronics and self-powered devices.