RESUMO
X-ray micro-CT has been used to study the tracheal system of Pre and Post hibernation Queen wasps (Vespula vulgaris) and their workers. We have compared our findings in wasps with Snodgrass's description of the tracheal system of the honeybee as characterised by anatomical dissection. Our images, whilst broadly similar, identify the tracheal system as being considerably more complex than previously suggested. One of the 30 wasps imaged had a markedly different, previously undescribed tracheal system. Since completing this study, a large micro-CT study from the American Museum of Natural History (AMNH) has been published. This used different software (Slicer) and analysed 16bit digital data. We have compared our methods with that described in the AMNH publication, adopted their suggested nomenclature and have made recommendations for future studies.
RESUMO
Background: Obstructive cholestasis can lead to significant alterations of the biliary tree depending on the extent and duration of the biliary occlusion. Current experimental studies reported about advanced techniques for corrosion cast and 3D reconstruction (3D-reco) visualizing delicate microvascular structures in animals. We compared these two different techniques for visualization and quantitative assessment of the obstructed murine biliary tree with classical 2D histology. Methods: Male mice (n = 36) were allocated to 3 different experiments. In experiments 1 and 2, we injected two different media (Microfil© for 3D-reco, MV; Batson's No.17 for corrosion cast, CC) into the extrahepatic bile duct. In experiment 3 we sampled liver tissue for 2D histology (HE, BrdU). Time points of interest were days 1, 3, 5, 7, 14, and 28 after biliary occlusion. We used different types of software for quantification of the different samples: IMALYTICS Preclinical for 3D scans (MV); NDP.view2 for the digital photography of CC; HistoKat software for 2D histology. Results: We achieved samples in 75% of the animals suitable for evaluation (MV and CC, each with 9/12). Contrasting of terminal bile ducts (4th order of branches) was achieved with either technique. MV permitted a fast 3D-reco of the hierarchy of the biliary tree, including the 3rd and 4th order of branches in almost all samples (8/9 and 6/9). CC enabled focused evaluation of the hierarchy of the biliary tree, including the 4th to 5th order of branches in almost all samples (9/9 and 8/9). In addition, we detected dense meshes of the smallest bile ducts in almost all CC samples (8/9). MV and CC allowed a quantitative assessment of anatomical details of the 3rd and 4th order branches of almost every sample. The 2D histology identified different kinetics and areas of proliferation of hepatocytes and cholangiocytes. Complementary usage of 3D-reco, corrosion casting and 2D histology matched dense meshes of small bile ducts with areas of intensive proliferative activity of cholangiocytes as periportal proliferative areas of 4th and 5th order branches (â¼terminal bile ducts and bile ductules) matched with its morphological information the matching assessment of areas with increased proliferative activity (BrdU) and a partial quantification of the characteristics of the 4th order branches of the biliary tree. Conclusion: The 3D-reco and corrosion casting of the murine biliary tree are feasible and provide a straightforward, robust, and reliable (and more economical) procedure for the visualization and quantitative assessment of architectural alterations, in comparative usage with the 2D histology.
RESUMO
Background and aims: Previous work has shown that oral losartan can enhance microfracture-mediated cartilage repair in a rabbit osteochondral defect injury model. In this study, we aimed to determine whether oral losartan would have a detrimental effect on articular cartilage and bone homeostasis in the uninjured sides. Methods: New Zealand rabbits were divided into 4 groups including normal uninjured (Normal), contralateral uninjured side of osteochondral defect (Defect), osteochondral defect plus microfracture (Microfracture) and osteochondral defect plus microfracture and losartan oral administration (10 mg/kg/day) (Losartan). Rabbits underwent different surgeries and treatment and were sacrificed at 12 weeks. Both side of the normal group and uninjured side of treatment groups tibias were harvested for Micro-CT and histological analysis for cartilage and bone including H&E staining, Herovici's staining (bone and cartilage) Alcian blue and Safranin O staining (cartilage) as well as immunohistochemistry of losartan related signaling pathways molecules for both cartilage and bone. Results: Our results showed losartan oral treatment at 10 mg/kg/day slightly increase Alcian blue positive matrix as well as decrease collagen type 3 in articular cartilage while having no significant effect on articular cartilage structure, cellularity, and other matrix. Losartan treatment also did not affect angiotensin receptor type 1 (AGTR1), angiotensin receptor type 2 (AGTR2) and phosphorylated transforming factor ß1 activated kinase 1 (pTAK1) expression level and pattern in the articular cartilage. Furthermore, losartan treatment did not affect microarchitecture of normal cancellous bone and cortical bone of tibias compared to normal and other groups. Losartan treatment slightly increased osteocalcin positive osteoblasts on the surface of cancellous bone and did not affect bone matrix collagen type 1 content and did not change AGTR1, AGTR2 and pTAK1 signal molecule expression. Conclusion: Oral losartan used as a microfracture augmentation therapeutic does not have significant effect on uninjured articular cartilage and bone based on our preclinical rabbit model. These results provided further evidence that the current regimen of using losartan as a microfracture augmentation therapeutic is safe with respect to bone and cartilage homeostasis and support clinical trials for its application in human cartilage repair.
RESUMO
This study develops a three-dimensional automated detection framework (PitScan) that systematically evaluates the severity and phenomenology of pitting corrosion. This framework uses a python-based algorithm to analyse microcomputer-tomography scans (µCT) of cylindrical specimens undergoing corrosion. The approach systematically identifies several surface-based corrosion features, enabling full spatial characterisation of pitting parameters, including pit density, pit size, pit depth as well as pitting factor according to ASTM G46-94. Furthermore, it is used to evaluate pitting formation in tensile specimens of a Rare Earth Magnesium alloy undergoing corrosion, and relationships between key pitting parameters and mechanical performance are established. Results demonstrated that several of the parameters described in ASTM G46-94, including pit number, pit density and pitting factor, showed little correlation to mechanical performance. However, this study did identify that other parameters showed strong correlations with the ultimate tensile strength and these tended to be directly linked to the reduction of the cross-sectional area of the specimen. Specifically, our results indicate, that parameters directly linked to the loss of the cross-sectional area (e.g. minimum material width), are parameters that are most suited to provide an indication of a specimen's mechanical performance. The automated detection framework developed in this study has the potential to provide a basis to standardise measurements of pitting corrosion across a range of metals and future prediction of mechanical strength over degradation time.
RESUMO
Malpighian tubules are the insect equivalent of mammalian kidneys and normally drain into the gut at the junction between the mid and hind gut. The Malpighian tubules of the fruit fly Drosophila melanogaster are increasingly being used as a model for studying human renal tract development, histology, nephrolithiasis and urolithiasis. In the present study we report when using X-ray micro-computer tomography techniques, the larval, intrapuparial and adult stages of the larger Calliphora vomitoria can contain large amounts of calcium-rich concretions which are tightly packed in the lumen of both anterior Malpighian tubules. We show that it is feasible to utilise these calcium-rich concretions as a form of marking agent to delineate the various developmental stages of the Malpighian tubules including the crucial phase when the Malpighian tubules reconnect with the hind gut. In the majority of cases during the intrapuparial period the ureters of the Malpighian tubules did not start to re-canalise and thus reconnect with the developing hind gut until the 7th day of the 10-11 day. Just prior to ecdysis, virtually all the radio-opaque concretions in the Malpighian tubules had emptied into the hind gut and had then been completely excreted by the time the imago emerged from its puparium. In contrast, we show that in flies developing from larvae previously stained by ingesting Rhodamine B, a known substrate for both the Multi Xenobiotic Resistance and Multi Drug Resistant membrane transport systems, the efficiency with which these calcium-rich concretions are excreted by the imago as it emerges from its intrapuparial period can be significantly impaired. Therefore, it might be useful to include C. vomitoria as a model when studying renal tract development and urolithiasis using X-ray micro-computer tomography.
Assuntos
Calliphoridae/anatomia & histologia , Túbulos de Malpighi , Animais , Túbulos de Malpighi/diagnóstico por imagem , Microtomografia por Raio-XRESUMO
The filamentous ascomycete fungus Aspergillus niger is a prolific secretor of organic acids, proteins, enzymes and secondary metabolites. Throughout the last century, biotechnologists have developed A. niger into a multipurpose cell factory with a product portfolio worth billions of dollars each year. Recent technological advances, from genome editing to other molecular and omics tools, promise to revolutionize our understanding of A. niger biology, ultimately to increase efficiency of existing industrial applications or even to make entirely new products. However, various challenges to this biotechnological vision, many several decades old, still limit applications of this fungus. These include an inability to tightly control A. niger growth for optimal productivity, and a lack of high-throughput cultivation conditions for mutant screening. In this mini-review, we summarize the current state-of-the-art for A. niger biotechnology with special focus on organic acids (citric acid, malic acid, gluconic acid and itaconic acid), secreted proteins and secondary metabolites, and discuss how new technological developments can be applied to comprehensively address a variety of old and persistent challenges.
Assuntos
Aspergillus niger , Biotecnologia , Aspergillus niger/genética , Aspergillus niger/metabolismo , Ácido Cítrico/metabolismo , Edição de GenesRESUMO
BACKGROUND: Mucus and mucus glands are important features of the amphibian cutis. In tree frogs, the mucus glands and their secretions are crucial components of the adhesive digital pads of these animals. Despite a variety of hypothesised functions of these components in tree frog attachment, the functional morphology of the digital mucus glands and the chemistry of the digital mucus are barely known. Here, we use an interdisciplinary comparative approach to analyse these components, and discuss their roles in tree frog attachment. RESULTS: Using synchrotron micro-computer-tomography, we discovered in the arboreal frog Hyla cinerea that the ventral digital mucus glands differ in their morphology from regular anuran mucus glands and form a subdermal gland cluster. We show the presence of this gland cluster also in several other-not exclusively arboreal-anuran families. Using cryo-histochemistry as well as infrared and sum frequency generation spectroscopy on the mucus of two arboreal (H. cinerea and Osteopilus septentrionalis) and of two terrestrial, non-climbing frog species (Pyxicephalus adspersus and Ceratophrys cranwelli), we find neutral and acidic polysaccharides, and indications for proteinaceous and lipid-like mucus components. The mucus chemistry varies only little between dorsal and ventral digital mucus in H. cinerea, ventral digital and abdominal mucus in H. cinerea and O. septentrionalis, and between the ventral abdominal mucus of all four studied species. CONCLUSIONS: The presence of a digital mucus gland cluster in various anuran families, as well as the absence of differences in the mucus chemistry between arboreal and non-arboreal frog species indicate an adaptation towards generic functional requirements as well as to attachment-related requirements. Overall, this study contributes to the understanding of the role of glands and their secretions in tree frog attachment and in bioadhesion in general, as well as the evolution of anurans.
RESUMO
Inflorescence architecture is diverse in angiosperms, and is mainly determined by the arrangement of the branches and flowers, known as phyllotaxy. In rice (Oryza sativa), the main inflorescence axis, called the rachis, generates primary branches in a spiral phyllotaxy, and flowers (spikelets) are formed on these branches. Here, we have studied a classical mutant, named verticillate rachis (ri), which produces branches in a partially whorled phyllotaxy. Gene isolation revealed that RI encodes a BELL1-type homeodomain transcription factor, similar to Arabidopsis PENNYWISE/BELLRINGER/REPLUMLESS, and is expressed in the specific regions within the inflorescence and branch meristems where their descendant meristems would soon initiate. Genetic combination of an ri homozygote and a mutant allele of RI-LIKE1 (RIL1) (designated ri ril1/+ plant), a close paralog of RI, enhanced the ri inflorescence phenotype, including the abnormalities in branch phyllotaxy and rachis internode patterning. During early inflorescence development, the timing and arrangement of primary branch meristem (pBM) initiation were disturbed in both ri and ri ril1/+ plants. These findings suggest that RI and RIL1 were involved in regulating the phyllotactic pattern of the pBMs to form normal inflorescences. In addition, both RI and RIL1 seem to be involved in meristem maintenance, because the ri ril1 double-mutant failed to establish or maintain the shoot apical meristem during embryogenesis.
Assuntos
Inflorescência/embriologia , Inflorescência/metabolismo , Meristema/embriologia , Meristema/metabolismo , Oryza/embriologia , Oryza/metabolismo , Proteínas de Plantas/metabolismo , Regulação da Expressão Gênica de Plantas , Inflorescência/genética , Meristema/genética , Oryza/genética , Proteínas de Plantas/genéticaRESUMO
Fused Deposition Modelling (a.k.a. FDM-3D printing) has been previously employed in the development of personalized medicines with unique properties and release behavior. In the present work, a bilayer dosage form containing two anti-diabetic drugs with different daily dosage regimens; i.e. metformin and glimepiride, was manufactured via FDM 3D printing, studied using a variety of techniques and characterized in vitro. Metformin and glimepiride were embedded in Eudragit® RL sustained release layer and polyvinyl alcohol (PVA) layer respectively. Incorporation of more than one API's into the formulation is desirable, as it increases patient compliance and reduces cost of treatment, especially when distinct dosages of API's can be adjusted individually in situ, in order to meet each patient's specific needs, a capability provided by 3D printing. A number of different preparation methods, which involved different plasticizers and extruders, were tested on manufacturing Eudragit® RL drug-loaded filaments for printing the sustained release layer. The properties of the produced filaments were assessed by means of mechanical and physicochemical characterization techniques and the filaments with the optimum properties were used for printing. Microfocus computed tomography (µCT) imaging-based actual/nominal comparison analysis showed a printing accuracy ranging between -100, +200⯵m, while X-ray (XRD) diffractograms revealed the incorporation of the (initially crystalline) API's as amorphous dispersions into polymer matrices. Dissolution tests showed sufficient drug release for both drugs in desired time frames (75â¯min for glimepiride and 480â¯min for metformin). The results from the current study emphasize the potentiality of 3D printing technology for tailor-made solid dosage forms for combined pharmacotherapy, even at the cases when API's with different desirable release profiles are employed.
Assuntos
Hipoglicemiantes/química , Metformina/química , Impressão Tridimensional , Compostos de Sulfonilureia/química , Tecnologia Farmacêutica/métodos , Administração Oral , Cristalização , Cristalografia por Raios X , Preparações de Ação Retardada , Formas de Dosagem , Portadores de Fármacos , Combinação de Medicamentos , Composição de Medicamentos , Liberação Controlada de Fármacos , Hipoglicemiantes/administração & dosagem , Cinética , Metformina/administração & dosagem , Polímeros/química , Álcool de Polivinil/química , Solubilidade , Compostos de Sulfonilureia/administração & dosagem , Microtomografia por Raio-XRESUMO
Female reproductive systems are important characters for understanding the evolution of Brachyura and resolving its phylogenetic relationships. We herein investigate a podotreme brachyuran reproductive system comprehensively for the first time studying spermathecae and gonopores of Homoloidea with histological methods, micro-computer tomography and scanning electron microscopy. Our results show that spermathecal apertures are species-specific and their shape corresponds closely to that of male copulatory organs. Apertures were either enclosed by membranous cuticle areas or otherwise occluded preventing direct access into spermathecae. 3D-reconstructions reveal that spermathecae differ between the species Paromola cuvieri and Homola barbata with regard to the involvement of sternite 7 and 8, respectively, in forming the sperm storage chamber. The cuticle epithelium that lines the spermathecal chamber is irregular and distinct from the remaining cylindrical cuticle epithelium. A first uniramous pleopod was present in all homoloids studied and always held in a position to cover spermathecal apertures. Specific pulvinated cuticle structures present on both sides of the first pleopod are herein interpreted as adhesive structures functioning in reproductive processes. The coxal gonopores were enclosed by a laterally arising muscular mobile operculum that resembles opercula described in eubrachyuran vaginae, which raises the question whether these two structures are homologous. Our results are compared with data available for other brachyuran groups and discussed in terms of phylogenetic relationships within the Brachyura and possible functions in insemination and fertilization in Podotremata. J. Morphol. 278:89-105, 2017. ©© 2016 Wiley Periodicals,Inc.
Assuntos
Braquiúros/anatomia & histologia , Genitália Feminina/anatomia & histologia , Filogenia , Espermatozoides , Animais , Braquiúros/genética , Epitélio , Feminino , Técnicas Histológicas , Masculino , Microscopia Eletrônica de Varredura , Especificidade da EspécieRESUMO
The dentition of lamniforme sharks exhibits several characters that have been used extensively to resolve the phylogenetic relationships of extant taxa, yet some uncertainties remain. Also, the development of different teeth of a tooth file within the jaws of most extant lamniforms has not been documented to date. High-resolution micro-computed tomography is used here to re-evaluate the importance of two dental characters within the order Lamniformes, which were considered not to be phylogenetically informative, the histotype and the number of teeth per tooth file. Additionally, the development and mineralization patterns of the teeth of the two osteodont lamniforms Lamna nasus and Alopias superciliosus were compared. We discuss the importance of these dental characters for phylogenetic interpretations to assess the quality of these characters in resolving lamniform relationships. The dental characters suggest that (1) Lamniformes are the only modern-level sharks exhibiting the osteodont histotype, (2) the osteodont histotype in lamniform sharks is a derived state in modern-level sharks (Elasmobranchii), (3) the osteodont type, conversely is convergently achieved when the clade Chondrichthyes is considered and thus might comprise a functional rather than a phylogenetic signal, and (4) there is an increase in the number of teeth per file throughout lamniform phylogeny. Structural development of the teeth of L. nasus and A. superciliosus is congruent with a previous investigation of the lamniform shark Carcharodon carcharias. J. Morphol. 277:1584-1598, 2016. © 2016 Wiley Periodicals, Inc.
Assuntos
Tubarões/anatomia & histologia , Dente/citologia , Dente/embriologia , Animais , Dentição , Imageamento Tridimensional , Arcada Osseodentária/anatomia & histologia , Filogenia , Dente/anatomia & histologia , Dente/diagnóstico por imagem , Microtomografia por Raio-XRESUMO
The superfamily Austrochiloidea (Austrochilidae and Gradungulidae) take a pivotal position in araneomorph spider phylogeny. In this discussion crevice weaver spiders (Filistatidae) are of equal interest. Especially data from these phylogenetically uncertain yet basal off branching groups can enlighten our understanding on the evolution of organ systems. In the course of a survey on the evolutionary morphology of the circulatory system in spiders we therefore investigated the hemolymph vascular system in two austrochiloid and one filistatid species. Additionally some data on a hypochilid and a gradungulid species are included. Using up-to-date morphological methods, the vascular systems in these spiders are visualized three dimensionally. Ground pattern features of the circulatory systems in austrochiloid spiders are presented and the data discussed along recent lines of phylogenetic hypotheses. Special topics highlighted are the intraspecific variability of the origins of some prosomal arteries and the evolutionary correlation of respiratory and circulatory systems in spiders.
Assuntos
Evolução Biológica , Aranhas/anatomia & histologia , Animais , Feminino , Hemolinfa/diagnóstico por imagem , Microtomografia por Raio-XRESUMO
While micro-FE simulations have become a standard tool in computational biomechanics, the choice of appropriate material properties is still a relevant topic, typically involving empirical grey value-to-elastic modulus relations. We here derive the voxel-specific volume fractions of mineral, collagen, and water, from tissue-independent bilinear relations between mineral and collagen content in extracellular bone tissue (J. Theor. Biol. 287: 115, 2011), and from the measured X-ray attenuation information quantified in terms of grey values. The aforementioned volume fractions enter a micromechanics representation of bone tissue, as to deliver voxel-specific stiffness tensors. In order to check the relevance of this strategy, we convert a micro Computer Tomograph of a mouse femur into a regular Finite Element mesh, apply forces related to the dead load of a standing mouse, and then compare simulation results based on voxel-specific heterogeneous elastic properties to results based on homogeneous elastic properties related to the spatial average over the solid bone matrix compartment, of the X-ray attenuation coefficients. The element-specific strain energy density illustrates that use of homogeneous elastic properties implies overestimation of the organ stiffness. Moreover, the simulation reveals large tensile normal stresses throughout the femur neck, which may explain the mouse femur neck's trabecular morphology being quite different from the human case, where the femur neck bears compressive forces and bending moments.