Re-entrant phase transitions in Laponite/Gum Arabic nanocomposites.

A re-entrant gel transition is observed in a discotic clay, Laponite (Lap) aqueous suspensions with the addition of a complex polysaccharide, Gum Arabic (GA). For fixed concentrations of Lap (1-3 % w/v) and at low GA concentrations (CGA < 10 % w/v), the composites exhibit gel behaviour, while the suspensions undergo liquid phase separation for intermediate GA concentrations (10 % w/v < CGA < 20 % w/v). Gel behaviour is again observed in the samples at even higher GA concentrations (CGA > 30 % w/v). Here, we identify a thermodynamic phase transition in Lap/GA mixtures that is caused by a variation in GA content. The viscoelastic characteristics, phase transitions, and gelation kinetics of the Lap/GA mixtures have been studied by employing rheology, small-angle X-ray scattering, and optical investigations. Reduction of the negative values of zeta-potential and growth of the composite system's hydrodynamic size indicated the presence of interactions in Lap/GA mixtures. The phase diagram enables the apparent interactions and phase transitions between the nanoplatelets and the complex polysaccharides. Thus, our study provides new perspectives on a nanocomposite's tuneable rheological and structural features.

Nanoscale Operando Imaging of Electrically Driven Charge-Density Wave Phase Transitions.

Structural transformations in strongly correlated materials promise efficient and fast control of materials' properties via electrical or optical stimulation. The desired functionality of devices operating based on phase transitions, however, will also be influenced by nanoscale heterogeneity. Experimentally characterizing the relationship between microstructure and phase switching remains challenging, as nanometer resolution and high sensitivity to subtle structural modifications are required. Here, we demonstrate nanoimaging of a current-induced phase transformation in the charge-density wave (CDW) material 1T-TaS2. Combining electrical characterizations with tailored contrast enhancement, we correlate macroscopic resistance changes with the nanoscale nucleation and growth of CDW phase domains. In particular, we locally determine the transformation barrier in the presence of dislocations and strain, underlining their non-negligible impact on future functional devices. Thereby, our results demonstrate the merit of tailored contrast enhancement and beam shaping for advanced operando microscopy of quantum materials and devices.

Entropy and Negative Specific Heat of Doped Graphene: Topological Phase Transitions and Nernst's Theorem Revisited.

This study explores the thermodynamic properties of doped graphene using an adapted electronic spectrum. We employed the one-electron tight-binding model to describe the hexagonal lattice structure. The dispersion relation for graphene is expressed in terms of the hopping energies using a compositional parameter that characterizes the different dopant atoms in the lattice. The focus of the investigation is on the impact of the compositions, specifically the presence of dopant atoms, on the energy spectrum, entropy, temperature, and specific heat of graphene. The numerical and analytical results reveal distinct thermodynamic behaviors influenced by the dopant composition, including topological transitions, inflection points in entropy, and specific heat divergences. In addition, the use of Boltzmann entropy and the revision of Nernst's theorem for doped graphene are introduced as novel aspects.

Tuning structural modulation and magnetic properties in metal-organic coordination polymers [CH3NH3]CoxNi1-x(HCOO)3.

Three solid solutions of [CH3NH3]CoxNi1-x(HCOO)3, with x = 0.25 (1), x = 0.50 (2) and x = 0.75 (3), were synthesized and their nuclear structures and magnetic properties were characterized using single-crystal neutron diffraction and magnetization measurements. At room temperature, all three compounds crystallize in the Pnma orthorhombic space group, akin to the cobalt and nickel end series members. On cooling, each compound undergoes a distinct series of structural transitions to modulated structures. Compound 1 exhibits a phase transition to a modulated structure analogous to the pure Ni compound [Cañadillas-Delgado, L., Mazzuca, L., Fabelo, O., Rodríguez-Carvajal, J. & Petricek, V. (2020). Inorg. Chem. 59, 17896-17905], whereas compound 3 maintains the behaviour observed in the pure Co compound reported previously [Canadillas-Delgado, L., Mazzuca, L., Fabelo, O., Rodriguez-Velamazan, J. A. & Rodriguez-Carvajal, J. (2019). IUCrJ, 6, 105-115], although in both cases the temperatures at which the phase transitions occur differ slightly from the pure phases. Monochromatic neutron diffraction measurements showed that the structural evolution of 2 diverges from that of either parent compound, with competing hydrogen bond interactions that drive the modulation throughout the series, producing a unique sequence of phases. It involves two modulated phases below 96 (3) and 59 (3) K, with different q vectors, similar to the pure Co compound (with modulated phases below 128 and 96 K); however, it maintains the modulated phase below magnetic order [at 22.5 (7) K], resembling the pure Ni compound (which presents magnetic order below 34 K), resulting in an improper modulated magnetic structure. Despite these large-scale structural changes, magnetometry data reveal that the bulk magnetic properties of these solid solutions form a linear continuum between the end members. Notably, doping of the metal site in these solid solutions allows for tuning of bulk magnetic properties, including magnetic ordering temperature, transition temperatures and the nature of nuclear phase transitions, through adjustment of metal ratios.

Reversible Structural Phase Transitions in Zero-dimensional Cu(I)-Based Metal Halides for Dynamically Tunable Emissions.

Exploring structural phase transitions and luminescence mechanisms in Zero-dimensional (0D) metal halides poses significant challenges, that are crucial for unlocking the full potential of tunable optical properties and diversifying their functional capabilities. Herein, we have designed two inter-transformable 0D Cu(I)-based metal halides, namely (C19H18P)2CuI3 and (C19H18P)2Cu4I6, through distinct synthesis conditions utilizing identical reactants. Their optical properties and luminescence mechanisms were systematically elucidated by experiments combined with density functional theory calculations. The bright cyan-fluorescent (C19H18P)2CuI3 with high photoluminescence quantum yield (PLQY) of 77% is attributed to the self-trapped exciton emission. Differently, the broad yellow-orange fluorescence of (C19H18P)2Cu4I6 displays a remarkable PLQY of 83%. Its luminescence mechanism is mainly attributed to the combined effects of metal/halide-to-ligand charge transfer and cluster-centered charge transfer, which effects stem from the strong Cu-Cu bonding interactions in the (Cu4I6)2- clusters. Moreover, (C19H18P)2CuI3 and (C19H18P)2Cu4I6 exhibit reversible structural phase transitions. The elucidation of the phase transitions mechanism has paved the way for an unforgeable anti-counterfeiting system. This system dynamically shifts between cyan and yellow-orange fluorescence, triggered by the phase transitions, bolstering security and authenticity. This work enriches the luminescence theory of 0D metal halides, offering novel strategies for optical property modulation and fostering optical applications.

Spontaneous symmetry breaking of cooperation between species.

In mutualistic associations, two species cooperate by exchanging goods or services with members of another species for their mutual benefit. At the same time, competition for reproduction primarily continues with members of their own species. In intra-species interactions, the prisoner's dilemma is the leading mathematical metaphor to study the evolution of cooperation. Here we consider inter-species interactions in the spatial prisoner's dilemma, where members of each species reside on one lattice layer. Cooperators provide benefits to neighbouring members of the other species at a cost to themselves. Hence, interactions occur across layers but competition remains within layers. We show that rich and complex dynamics unfold when varying the cost-to-benefit ratio of cooperation, r. Four distinct dynamical domains emerge that are separated by critical phase transitions, each characterized by diverging fluctuations in the frequency of cooperation: (i) for large r cooperation is too costly and defection dominates; (ii) for lower r cooperators survive at equal frequencies in both species; (iii) lowering r further results in an intriguing, spontaneous symmetry breaking of cooperation between species with increasing asymmetry for decreasing r; (iv) finally, for small r, bursts of mutual defection appear that increase in size with decreasing r and eventually drive the populations into absorbing states. Typically, one species is cooperating and the other defecting and hence establish perfect asymmetry. Intriguingly and despite the symmetrical model set-up, natural selection can nevertheless favour the spontaneous emergence of asymmetric evolutionary outcomes where, on average, one species exploits the other in a dynamical equilibrium.

Room-Temperature Possible Current-Induced Transition in Ca2RuO4 Thin Films Grown Through Intercalation-Like Cation Diffusion in the A2BO4 Ruddlesden-Popper Structure.

Cation deficiency tuning is a central issue in thin-film epitaxy of functional metal oxides, as it is typically more difficult than anion deficiency tuning, as anions can be readily supplied from gas sources. Here, highly effective internal deficiency compensation of Ru cations is demonstrated for Ca2RuO4 epitaxial films based on diffusive transfer of metal cations in the A2BO4 Ruddlesden-Popper lattice from solid-phase cation sources. Through detailed structural characterization of Ca2RuO4/LaAlO3 (001) thin films grown with external cation sources by solid-phase epitaxy, the occurrence of intercalation-like, interstitial diffusion of La cations (from the substrates) in the A2BO4 structure is revealed, and that of Ru cations is also suggested. Relying on the interstitial-type diffusion, an optimized Ru deficiency compensation method, which does not induce the formation of Can +1RunO3 n +1 Ruddlesden-Popper impurity phases with higher n, is proposed for Ca2RuO4 epitaxial films. In the Ca2RuO4/LaAlO3 (001) thin films grown with Ru deficiency compensation, record-high resistivity values (102-10-1 Ω cm) and a large (more than 200 K) increase in the temperature range of the nonlinear transport properties are demonstrated by transport measurements, demonstrating the possible advantages of this method in the control of the current-induced quantum phase transition of Ca2RuO4.

Strain-Driven Phase Transitions in Delafossite Cu1-xAxAlO2: A Key to Enhanced Photo(electro)catalytic Performance.

This study investigates the impact of intrinsic strain and phase transitions on the thermodynamic stability and electronic properties of Cu1-xAxAlO2 solid solutions, which are key to their photocatalytic performance. It is demonstrated that Cu1-xAxAlO2 with A = Ag, Au, Pt can form continuous isostructural solid solutions due to relatively small compressive strain, while a substantial increase strain restricts Cu1-xPdxAlO2 to forming only limited solutions. For A = Li, Na, the formation of heterostructural solid solutions is facilitated by structural motif alterations, accommodating significant differences in ionic radii and A-O bond characteristics. Specifically, Cu1-xLixAlO2 exhibits a phase transition at x ≈ 0.333, whereas Cu1-xNaxAlO2 undergoes three distinct phase transitions. Electronic structure analysis indicates that in Cu1-xAxAlO2 (A = Ag, Au), d10-d10 closed-shell interactions dominate, enabling tunable band gaps with varying solubility. Nevertheless, increased intrinsic strain in metal sublattices, as seen in A = Pd and Pt, shifts antibonding states to the Fermi level, inducing a semiconductor-to-metal transition. Experimental evidence confirms that Ag+ ions modulate the band gaps and carrier dynamics in Cu1-xAgxAlO2, with Cu0.75Ag0.25AlO2 exhibiting heightened photoelectrochemical activity and a 38.5-fold enhancement in H2 production rate over CuAlO2. Additionally, the coordination environment changes between alkali metals and O, induced by phase transitions, effectively tune the band edge positions and carrier dynamics of Cu1-xAxAlO2 (A = Li, Na) heterostructural solid solutions. Therefore, 3R-Cu0.97Li0.03AlO2 with asymmetric nonlinear dumbbell O-Cu-O demonstrates the highest photocatalytic H2 production activity, 72.9 times greater than CuAlO2. In contrast, α-Cu1-xAxAlO2 with a smaller CuO6 octahedral splitting energy exhibits increased band gaps, resulting in diminished photocatalytic activity. This research underscores that strain-driven phase transition provides an additional control factor and new mechanism for regulating the photo(electro)catalytic activity of Cu1-xAxAlO2 solid solutions.

In Situ Annealing Effect on Thermally Co-Evaporated CsPbI2Br Thin Films Studied via Spectroscopic Ellipsometry.

All-inorganic cesium lead halide perovskites possess excellent thermal stability, a feature that renders them highly favorable for optoelectronic applications with an elevated thermal budget. Employing a coevaporation approach for their deposition holds promise for manufacturing at an industrial level, owing to improvements in device scalability and reproducibility. For unlocking the full potential of vacuum-evaporated perovskite thin films, it is crucial to delve deeper into their crystallization process, which, as a solid-state reaction, has been less investigated compared to the crystallization process of, most commonly used, solution-based methods. In this work, we employ spectroscopic ellipsometry, a nondestructive, high speed, and high accuracy characterization method, to study the real time annealing effect on thermally coevaporated CsPbI2Br thin films in a temperature range between 25 and 300 °C. We achieve this by developing a singular dynamic model that can be fitted in real time as a function of temperature, providing insights into how thermal annealing influences the perovskite film's morphology and optical constants. Based on the latter, we derive the temperature dependence of the thermo-optic coefficient and Urbach energy as well as analyze the interband transition energies via critical point analysis. We demonstrate that the γ- to ß-phase transition can be identified through a pronounced shift in the bandgap energy, whereas the ß- to α-phase transition can be discerned by a sharp increase in the film's roughness. We corroborate the obtained fit results with additional in- and ex situ measurements, such as in situ grazing incidence wide-angle X-ray scattering, atomic force microscopy, reflectance/transmittance, and profilometry.

The Determining Influence of the Phase Composition on the Mechanical Properties of Titanium-Iron Alloys after High-Pressure Torsion.

Three titanium alloys with 0.5, 6, and 9 wt.% iron were investigated, and the samples were pre-annealed in three different regions of the Ti-Fe phase diagram, namely ß, α+ß, and α+FeTi. After annealing, five samples of different phases and structural compositions were studied. They were then subjected to the high-pressure torsion (HPT). The microstructure of the samples before and after HPT treatment was studied using transmission and scanning electron microscopy. The microstructure of the samples obtained during heat treatment before HPT treatment had a fundamental effect on the microstructure after HPT. Grain boundary layers and chains of particles formed during the annealing process made it difficult to mix the material during HPT, which led to the formation of areas with non-uniform mixing of components. Thus, the grain boundary layers of the α-phase formed in the Ti-6wt % Fe alloy after annealing at 670 °C significantly decreased the mixing of the components during HPT. Despite the fact that the microstructure and phase composition of Ti-6wt % Fe alloys pre-annealed in three different regions of the Ti-Fe phase diagram had significant differences, after HPT treatment, the phase compositions of the studied samples were quite similar. Moreover, the measured micro- and nanohardness as well as the Young's modulus of Ti-6wt % Fe alloy had similar values. It was shown that the microhardness of the studied samples increased with the iron content. The values of nanohardness and Young's modulus correlated well with the fractions of ß- and ω-phases in the studied alloys.

Light-element and purely charge-based topological materials.

We examine a class of Hamiltonians characterized by interatomic, interorbital even-odd parity hybridization as a model for a family of topological insulators without the need for spin-orbit coupling. Non-trivial properties of these materials are exemplified by studying the topologically-protected edge states ofs-phybridized alkali and alkaline earth atoms in one and two-dimensional lattices. In 1D the topological features are analogous to the canonical Su-Schrieffer-Heeger model but, remarkably, occur in the absence of dimerization. Alkaline earth chains, with Be standing out due to its gap size and near particle-hole symmetry, are of particular experimental interest since their Fermi energy without doping lies directly at the level of topological edge states. Similar physics is demonstrated to occur in a 2D honeycomb lattice system ofs-pbonded atoms, where dispersive edge states emerge. Lighter elements are predicted using this model to host topological states in contrast to spin-orbit coupling-induced band inversion favoring heavier atoms.

Universal cold RNA phase transitions.

RNA's diversity of structures and functions impacts all life forms since primordia. We use calorimetric force spectroscopy to investigate RNA folding landscapes in previously unexplored low-temperature conditions. We find that Watson-Crick RNA hairpins, the most basic secondary structure elements, undergo a glass-like transition below [Formula: see text]C where the heat capacity abruptly changes and the RNA folds into a diversity of misfolded structures. We hypothesize that an altered RNA biochemistry, determined by sequence-independent ribose-water interactions, outweighs sequence-dependent base pairing. The ubiquitous ribose-water interactions lead to universal RNA phase transitions below TG, such as maximum stability at [Formula: see text]C where water density is maximum, and cold denaturation at [Formula: see text]C. RNA cold biochemistry may have a profound impact on RNA function and evolution.

Brillouin Biosensing of Viscoelasticity across Phase Transitions in Ovine Cornea.

Noninvasive in situ monitoring of viscoelastic characteristics of corneal tissue at elevated temperatures is pivotal for mechanical property-informed refractive surgery techniques, including thermokeratoplasty and photorefractive keratectomy, requiring precise thermal modifications of the corneal structure during these surgical procedures. This study harnesses Brillouin light scattering spectroscopy as a biosensing platform to noninvasively probe the viscoelastic properties of ovine corneas across a temperature range of 25-64 °C. By submerging the tissue samples in silicone oil, consistent hydration and immiscibility are maintained, allowing for their accurate sensing of temperature-dependent mechanical behaviors. We identify significant phase transitions in the corneal tissue, particularly beyond 40 °C, likely due to collagen unfolding, marking the beginning of thermal destabilization. A subsequent transition, observed beyond 60 °C, correlates with collagen denaturation. These phase transformations highlight the cornea's sensitivity to both physiologically reversible and irreversible viscoelastic changes induced by mild to high temperatures. Our findings underscore the potential of the Brillouin biosensing technique for real-time diagnostics of corneal biomechanics during refractive surgeries to attain optimized therapeutic outcomes.

Consequences of the Pb-S bond formation for lead halide perovskites.

Lead halide perovskites are structurally not stable due to their ionic bonds. Using sulfur agents in the crystal growth improves the stability and performance of the photovoltaic and light-emitting devices. In this theoretical work, we use a small toy S-radical in place of A cation in the bulk of lead iodide perovskite, and highlight the significance of the Pb-S covalent-double-bond formation for: the charge redistribution on the neighboring bonds that also turn to be covalent, phase transformation to a stable non-perovskite structure, and superior optoelectronic properties. The chemical analysis was performed with the Quantum Theory of Atoms In Molecules (QTAIM) and Non-Covalent Interactions (NCI) index. Excitonic properties were obtained from the solution of ab initio Bethe-Salpeter equation. Presence of the spin-orbit coupling triggers an interplay between the Frenkel and charge-transfer multiexcitons, switching between the photovoltaic and laser applications. Multiexcitons obey the exciton-fission preconditions.

Real-space visualization of a defect-mediated charge density wave transition.

We study the coupled charge density wave (CDW) and insulator-to-metal transitions in the 2D quantum material 1T-TaS2. By applying in situ cryogenic 4D scanning transmission electron microscopy with in situ electrical resistance measurements, we directly visualize the CDW transition and establish that the transition is mediated by basal dislocations (stacking solitons). We find that dislocations can both nucleate and pin the transition and locally alter the transition temperature Tc by nearly ~75 K. This finding was enabled by the application of unsupervised machine learning to cluster five-dimensional, terabyte scale datasets, which demonstrate a one-to-one correlation between resistance-a global property-and local CDW domain-dislocation dynamics, thereby linking the material microstructure to device properties. This work represents a major step toward defect-engineering of quantum materials, which will become increasingly important as we aim to utilize such materials in real devices.

Percolation Transitions in Edge-Coupled Interdependent Networks with Reinforced Inter-Layer Links.

Prior research on cascading failures within interdependent networks has predominantly emphasized the coupling of nodes. Nevertheless, in practical networks, interactions often exist not just through the nodes themselves but also via the connections (edges) linking them, a configuration referred to as edge-coupled interdependent networks. Past research has shown that introducing a certain percentage of reinforced nodes or connecting edges can prevent catastrophic network collapses. However, the effect of reinforced inter-layer links in edge-coupled interdependent networks has yet to be addressed. Here, we develop a theoretical framework for studying percolation models in edge-coupled interdependent networks by introducing a proportion of reinforced inter-layer links and deriving detailed expressions for the giant and finite components and the percolation phase transition threshold. We find that there exists a required minimum proportion of the reinforced inter-layer links to prevent abrupt network collapse, which serves as a boundary to distinguish different phase transition types of a network. We provide both analytical and numerical solutions for random and scale-free networks, demonstrating that the proposed method exhibits superior reinforcement efficiency compared to intra-layer link reinforcement strategies. Theoretical analysis, simulation results, and real network systems validate our model and indicate that introducing a specific proportion of reinforced inter-layer links can prevent abrupt system failure and enhance network robustness in edge-coupled interdependent networks.

Critical Model Insight into Broadband Dielectric Properties of Neopentyl Glycol (NPG).

This report presents the low-frequency (LF), static, and dynamic dielectric properties of neopentyl glycol (NPG), an orientationally disordered crystal (ODIC)-forming material important for the barocaloric effect applications. High-resolution tests were carried out for 173K

Structure-property relationship of a complex photoluminescent arylacetylide-gold(I) compound. I: a pressure-induced phase transformation caught in the act.

A pressure-induced triclinic-to-monoclinic phase transition has been caught `in the act' over a wider series of high-pressure synchrotron diffraction experiments conducted on a large, photoluminescent organo-gold(I) compound. Here, we describe the mechanism of this single-crystal-to-single-crystal phase transition, the onset of which occurs at ∼0.6 GPa, and we report a high-quality structure of the new monoclinic phase, refined using aspherical atomic scattering factors. Our case illustrates how conducting a fast series of diffraction experiments, enabled by modern equipment at synchrotron facilities, can lead to overestimation of the actual pressure of a phase transition due to slow transformation kinetics.

Synthesis, the Reversible Isostructural Phase Transition, and the Dielectric Properties of a Functional Material Based on an Aminobenzimidazole-Iron Thiocyanate Complex.

By introducing disordered molecules into a crystal structure, the motion of the disordered molecules easily induces the formation of multidimensional frameworks in functional crystal materials, allowing for structural phase transitions and the realization of various dielectric properties within a certain temperature range. Here, we prepared a novel ionic complex [C7H8N3]3[Fe(NCS)6]·H2O (1) between 2-aminobenzimidazole and ferric isothiocyanate from ferric chloride hexahydrate, ammonium thiocyanate, and 2-aminobenzimidazole using the evaporation of the solvent method. The main components, the single-crystal structure, and the thermal and dielectric properties of the complex were characterized using infrared spectroscopy, elemental analysis, single-crystal X-ray diffraction, powder XRD, thermogravimetric analysis, differential scanning calorimetry, variable-temperature and variable-frequency dielectric constant tests, etc. The analysis results indicated that compound 1 belongs to the P21/n space group. Within the crystal structure, the [Fe(NCS)6]3- anion formed a two-dimensional hydrogen-bonded network with the organic cation through S···S interactions and hydrogen bonding. The disorder-order motion of the anions and cations within the crystal and the deformation of the crystal frameworks lead to a significant reversible isostructural phase transition and multiaxial dielectric anomalies of compound 1 at approximately 240 K.

Graph Theoretical Description of Phase Transitions in Complex Multiscale Phases with Supramolecular Assemblies.

Phase transitions are typically quantified using order parameters, such as crystal lattice distances and radial distribution functions, which can identify subtle changes in crystalline materials or high-contrast phases with large structural differences. However, the identification of phases with high complexity, multiscale organization and of complex patterns during the structural fluctuations preceding phase transitions, which are essential for understanding the system pathways between phases, is challenging for those traditional analyses. Here, it is shown that for two model systems- thermotropic liquid crystals and a lyotropic water/surfactant mixtures-graph theoretical (GT) descriptors can successfully identify complex phases combining molecular and nanoscale levels of organization that are hard to characterize with traditional methodologies. Furthermore, the GT descriptors also reveal the pathways between the different phases. Specifically, centrality parameters and node-based fractal dimension quantify the system behavior preceding the transitions, capturing fluctuation-induced breakup of aggregates and their long-range cooperative interactions. GT parameterization can be generalized for a wide range of chemical systems and be instrumental for the growth mechanisms of complex nanostructures.