Chitosan nanoparticles, Rose Bengal-chitosan activated photodynamic therapy as final irrigant on pushout bond strength, smear layer removal efficacy and antibacterial effectiveness against E.faecalis.

AIM: Impact of final root canal disinfectants diode laser (DL), Rose Bengal photosensitizer (RBP), Chitosan Nanoparticles (CNPs), and CNPs modified RBP on Enterococcus faecalis (E.faecalis) survival rate, smear layer (SL) removal efficacy and push out bond strength (PBS) of resin sealer to the radicular dentin. MATERIAL AND METHOD: Single rooted seventy-five human mandibular premolar teeth were sectioned at a level of cementoenamel (CEJ) and root canal treatment was performed using a ProTaper rotary instrument. To assess the antibacterial efficiency E.faecalis inoculation was performed using a pour plate method. The samples were arbitrarily allocated into five groups based on the final disinfectant received (n = 15) Group-1 (NaOCl+17 % EDTA), Group-2 (NaOCl+DL), Group-3 (NaOCl+CNPs), Group-4 (NaOCl+RBP activated by DL) and Group-5 (NaOCl+CNPs-RBP activated by DL). SEM analysis for SL removal was performed on five specimens from each group. Root canal obturation and sectioning were performed at cervical, middle, and apical levels. PBS and failure mode were analyzed using a universal testing machine (UTM) and stereomicroscope respectively. The data was subjected to analysis using one-way analysis of variance (ANOVA) and Tukey's post hoc test. RESULT: Group 1 (NaOCl+17 % EDTA) (0.36 ± 0.01 CFU/mL) unveiled the maximum survival rate of tested bacteria. However, Group 5 (NaOCl+CNPs-RBP activated by DL) (0.11 ± 0.01 CFU/mL) displayed minimum survival of E.faecalis. The highest SL removal (1.44 ± 0.11) and bond integrity scores (12.23 ± 0.24 MPa) were recorded in the coronal section of Group 5 (NaOCl+ CNPs-RBP activated by DL) treated roots. However, the lowest removal of SL (3.15 ± 1.09) and PBS (7.24 ± 0.09 MPa) were recorded in Group 4 (NaOCl+RBP activated by DL) treated canals. CONCLUSION: CNPs-RBP activated by DL as the final irrigant provided satisfactory antibacterial activity, SL removal, and bond strength outcomes compared to other tested groups.

Assessment of Smear Layer Removal and Push-Out Bond Strength Efficacy of Traditional and Herbal Root Canal Irrigants Across Different Root Levels: An In Vitro Study.

INTRODUCTION: Endodontic therapy requires meticulous root canal debridement, pathogen elimination, and effective obturation to prevent microbial intrusion. The presence of the smear layer hinders sealer penetration, compromising sealing effectiveness. Sodium hypochlorite and chlorhexidine are esteemed endodontic irrigants. Herbal extracts like neem and tulsi, with antimicrobial and anti-inflammatory properties, show promise for root canal irrigation. The study aimed to evaluate the efficacy of various irrigants in removing the smear layer and enhancing push-out bond strength at different root canal levels. MATERIALS AND METHODS: One hundred mandibular premolars with single canals were collected, and 50 samples each were used for the smear layer and push-out bond strength analysis. Neem and tulsi extracts were prepared for irrigation. Teeth were decoronated, and up to 30 (6%) canals were prepared and were randomly divided into five groups based on irrigants used. A smear layer examination was conducted after longitudinally sectioning the tooth and sections were observed in a scanning electron microscope (SEM). Obturation was done in the remaining samples, and the push-out bond strength was assessed using a universal test machine. RESULTS: Sodium hypochlorite showed the highest smear layer removal efficacy followed by chlorhexidine, neem, tulsi leaves with rose water extract, and normal saline. Chlorhexidine exhibited the highest push-out bond strength, with the coronal third presenting the strongest values, followed by neem, tulsi with rose water, normal saline, and sodium hypochlorite. CONCLUSION: The study underscores the potential of herbal irrigants in endodontic therapy, indicating promising results while emphasizing the necessity for further clinical trials to validate their efficacy and other properties.

The effect of different intracanal irrigants on the push-out bond strength of dentin in damaged anterior primary teeth.

This experimental study investigated the effect of different intracanal irrigants on the push-out bond strength of dentin in damaged anterior primary teeth. The crowns of 90 anterior primary teeth were sectioned horizontally, 1 mm above the cementoenamel junction (CEJ). Following canal preparation with K-files, all groups except the negative control received normal saline irrigation. Canals were then irrigated with either 3% or 5.25% sodium hypochlorite (NaOCl), 2% or 0.2% chlorhexidine (CHX) solution (except negative and positive controls). The roots were filled with Metapex material and covered with a calcium hydroxide liner. In root canals, the bond was applied by self-etching and then light-cured for 20 seconds before canals were restored incrementally with composite. Stereomicroscopes were used to assess failure patterns. Push-out bond strengths (MPa ± SD) were: 3% NaOCl (16.92 ± 5.78), 5.25% NaOCl (8.96 ± 3.55), 2% CHX (14.76 ± 5.56), and 0.2% CHX (7.76 ± 2.93). Significant differences were seen across the irrigants regarding the push-out bond strength of dentin sections (P <0.001). The most frequent failures were adhesive and cohesive. NaOCl and CHX irrigants increased the push-out bond strength compared to controls. Compared to controls, both 3% NaOCl and 2% CHX irrigants significantly increased the push-out bond strength of dentin in non-vital anterior primary teeth.

Does the Mixing Method of AH Plus Jet Affect its Physicochemical and Mechanical Properties?

INTRODUCTION: The purpose of this study was to evaluate whether the mixing method of AH Plus Jet sealer affects its physicochemical and mechanical properties. METHODS: The properties of AH Plus Jet sealer were analyzed when mixed using either the Auto Mix Tip or manual mixing. The evaluated properties included radiopacity (n = 5), initial and final setting times (n = 5), flow (n = 5), and solubility (n = 3), following specifications outlined in ISO 6876/2012 and ADA Nº 57/2000. pH levels were measured at intervals of 3, 24, 72, and 168 hours (n = 10). The push-out bond strength test was conducted using a universal testing machine and using bovine teeth (n = 30). Failure modes were analyzed with stereomicroscopy. Porosity was evaluated under micro-CT (n = 5), and scanning electron microscopy was also performed (n = 5). One-way analysis of variance and Tukey, unpaired t-tests, or Mann-Whitney tests were used with a significance level of 5%. RESULTS: The Auto Mix exhibited a radiopacity value of 12.11 mmAl, whereas manual mixing resulted in 12.55 mmAl (P > .05). For initial and final setting times, Auto Mix showed 901 minutes and 1779 minutes, respectively, while manual mixing recorded values of 631 minutes and 1504 minutes (P < .05). In terms of flow, Auto Mix demonstrated higher values (25.26 mm) than manual mixing (21.71 mm) (P < .05). No statistical differences were observed between the two methods for solubility and pH (P > .05). Manual mixing presented a higher bond strength value (14.52 MPa) than Auto Mix (9.81 MPa) (P < .05). The mixed failure mode was the most frequent outcome for both methods. The highest porosity was observed for Auto Mix (P < .05). Scanning electron microscopy analysis revealed that manual mixing resulted in a smoother surface with fewer pores and smaller, more evenly distributed agglomerates compared to automatic mixing. CONCLUSION: The mixing method employed for AH Plus Jet sealer influences some physicochemical and mechanical properties of the material.

Comparison of push-out bond strength and apical microleakage of different calcium silicate-based cements after using EDTA, chitosan and phytic acid irrigations.

This research was aimed to evaluate push-out bond strength and apical-microleakage after application of three different calcium silicate-based cements with irrigation solutions on simulated immature teeth. 40 maxillary permanent canine teeth were used for push-out bond strength test, and 120 maxillary permanent incisors were used for microleakage evaluation. 120 root slices were divided into four main groups (EDTA, Chitosan, Phytic acid, and Saline) and immersed these solutiouns according to irrigation procedures. Each irrigation group was divided into 3 subgroups (Biodentine, MTA Repair HP, and NeoPUTTY). The prepared teeth were divided into four groups according to irrigation procedure for microleakage test. EDTA irrigation with Biodentine group showed highest push-out bond strength value and saline group with Neoputty showed the lowest push-out bond strength value. The highest microleakage value was seen in saline group with MTA Repair HP, while the lowest microleakage value was observed chitosan with Biodentine group. Chitosan and phytic acid solutions can be recommended as an alternative irrigation solution to 17% EDTA in single-session apexification treatment, since they are non-toxic, naturally occurring materials, effectively remove the smear layer, and have a positive effect on bond strength and apical leakage. RESEARCH HIGHLIGHTS: One of the factors affecting the long-term success of root canal treatment is a hermetic seal. Non-hermetic or inadequate filling triggers a chronic inflammatory reaction in periapical tissues, causing fluids to enter the spaces and negatively affecting the success of the treatment. Therefore, this study will help clinicians choose the right biomaterial and irrigation solution that will affect the success of root canal treatment.

Push-Out Bond Strength of Glass Fiber Endodontic Posts with Different Diameters.

(1) Background: The retention of intraradicular posts is an important factor for the prognosis of endodontically treated teeth. The purpose of this study was to evaluate the push-out bond strength (PBS) of the posts relating to their diameter and region of the root. (2) Methods: A total of 40 premolar teeth (decoronated and root canal-filled) were divided into four groups (n = 10). After post-space preparation, different sizes (1.0, 1.2, 1.5, and 2.0 mm) of glass fiber posts were luted with resin cement into the root canals. After placement, 2 mm thick slices were cut from the roots according to their apical, middle, and coronal regions (n = 116). Push-out tests were carried out in a universal testing machine on each slice. A statistical evaluation of the data was applied. (3) Results: When comparing the diameter, the 2.0 mm posts had the highest PBS (111.99 ± 10.40 N), while the 1.0 mm posts had the lowest PBS (99.98 ± 8.05 N). Divided by the surface of the bonded area, the average PBS value was the highest for the 1.0 mm posts (18.20 ± 1.67 MPa) and the lowest for the 2.0 mm posts (12.08 ± 1.05 MPa). (4) Conclusions: Within the limitations of the study, when comparing the regions of the roots, no significant differences were found among the PBS values of the three regions (p = 0.219). When comparing the diameters, significant differences were shown between the PBS values of the four groups (p = 0.023 and p = 0.003, respectively).

PEEK and glass fiber post pushout bond strength and vickers hardness of canal disinfected with curcumin photosensitizer activated by microbubble emulsion and sodium-hypochlorite with EDTA.

AIMS: Impact of different post-space disinfectants (Saline, Sodium hypochlorite (NaOCl) followed by ethylene-diamine-tetra-acetic acid (EDTA) and curcumin activated by microbubble emulsion (MBE) on the Vickers hardness (VH) of root canal dentin and extrusion bond strength (EBS) of Glass fiber post (GFP) and PEEK post. METHODS: Ninety maxillary central incisors having fully formed roots were included. After the specimen's disinfection, root canal treatment was completed. Post space was prepared by removing gutta-percha using gates glidden drills. Teeth were then arbitrarily allocated into three groups based on the methods of disinfection regime used. Group 1: Saline, Group 2: NaOCl+ EDTA and Group 3: Curcumin activated by MBE (n = 30). Analysis of VH of radicular dentin was performed using a micro-Vickers tester on ten samples from each group. After post-space disinfection, twenty specimens from each group were further divided into two subgroups (n = 10) In group-1A 2A, and 3A, GFP was used. Whereas, prefabricated PEEK posts were used in 1B, 2B, and 3B subgroups. The PBS and failure modes were performed using a universal testing machine and stereomicroscope respectively. Data was analyzed using ANOVA and Tukey post hoc test to identify significant variations among groups concerning the MH and EBS of the different posts used (p = 0.05). RESULTS: Group 2 (5.25 % NaOCl + 17 % EDTA) (0.15 ± 0.02 GPa) treated specimens presented lowest scores of VH. However, Group 1 (Saline) irrigated canals displayed the highest scores of surface hardness (0.25 ± 0.07 GPa). Additionally, a cervical third of 3A (CP activated by MBE + GFP) (11.22 ± 0.79 MPa) presented the highest scores of bond integrity. Whereas Group 1B (Saline + PEEK post) treated specimens presented the lowest scores of PBS (4.15 ± 0.15 MPa). CONCLUSION: Curcumin activated by microbubble emulsion for disinfection of canal dentin demonstrated favorable VH. Similarly, glass fiber post-cemented in radicular walls disinfected with curcumin activated with MBE showed promising post-bond integrity to the canal dentin.

Comparative Evaluation of the Push-Out Bond Strength of Glass Ionomer Cement, Mineral Trioxide Aggregate, Biodentine, and Endosequence Root Repair Material in Repair of Furcation Perforations: An In Vitro Study.

Introduction: An in vitro comparative analysis was performed to calculate the push-out bond strength of commercially existing root repairing cements like glass ionomer cement (GIC), biodentine, mineral trioxide aggregate (MTA), and endosequence root repair material (RRM) employed in furcation perforation, with or without blood contamination present. Materials and Methods: Eighty molars were selected and subjected to furcal perforations. They were categorized based on the cement used for repair (GIC, MTA, biodentine, and endosequence RRM); furthermore, they were sub-divided into two sub-groups, that is, blood contaminated and non-contaminated. For 24 hours, all the samples were kept in an incubator till the materials were fully set. Then these samples were examined for push-out bond strength measurement. Results: The 24-hour push-out bond strength of was the highest in biodentine and the lowest in glass ionomer cement. The push-out bond strength of endosequence RRM, MTA, and GIC was influenced by blood contamination. Conclusion: The push-out bond strength of biodentine was the highest as compared to endosequence RRM, MTA angelus, and GIC. The push-out bond strength of endosequence RRM and MTA angelus after 24 hours with or without blood contamination showed insignificant differences. Group 1A (GIC contaminated with blood) displayed the least push-out bond strength among other groups.

Comparative Analysis of AH Plus Bond Strength to Root Canal Dentin and Adhesive Interface Quality after Calcium Hydroxide Removal using Different Irrigation Protocols.

INTRODUCTION: To evaluate the push-out bond strength (POBS) of AH Plus sealer to root dentin and the adhesive interface quality after calcium hydroxide (Ca(OH)2) intracanal dressing removal with different final irrigation protocols. METHOD: After root canal instrumentation and irrigation, 40 root canals were filled with Ca(OH)2 and sealed. After 14 days, the specimens were randomly distributed according to the irrigation protocols for Ca(OH)2 removal (n = 10): GH2O (control) - distilled water; GNaOCl - 1% NaOCl; GEDTA - 17% EDTA; GEDTA + NaOCl - 17% EDTA + 1% NaOCl. The root canals were filled with AH Plus sealer and gutta-percha. After 7 days, the roots were sectioned into dentin slices and submitted to POBS test and analysis of the adhesive interface under scanning electron microscope. The POBS data were statistically evaluated (analysis of variance and Tukey test). The Kruskal-Wallis and Mann-Whitney tests were used to analyze the adhesive interface (α = 0.05). RESULTS: GH2O, GNaOCl, and GEDTA + NaOCl had similar POBS values, with higher values on the apical third, in comparison with other thirds (P < .05). A homogeneous and free-of-gaps adhesive interface was observed for GH2O, GNaOCl, and GEDTA + NaOCl, with difference between GH2O and GEDTA (P < .05). GH2O and GEDTA + NaOCl presented higher sealer tags formation (P < .05). CONCLUSION: The final rinse with EDTA for Ca(OH)2 dressing removal had a negative effect on the POBS of the filling material to root dentin. The use of EDTA followed by NaOCl had results similar to the distilled water, providing uniform and free-of-gaps adhesive interface, and a higher number of sealer tags.

Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study.

AIM: The aim of this present study was to compare the dislodgement resistance of calcium silicate-based sealer, zinc oxide sealer, and a new sealer combining both zinc oxide and calcium silicate-based sealer in vitro. MATERIALS AND METHODS: 60 single-rooted human teeth were instrumented with F3 Protaper Gold. All endodontic canals were filled using gutta percha cones using the cold lateral condensation technique in combination using one of the mentioned sealers (n = 20 per group). The teeth were divided into three groups: group A consisted of Sealite® Ultra, group B consisted of K-Sealer®, and group C consisted of BioRoot® RC. After 2 months of incubation (37°C, 100% humidity) and after cutting out 2 mm from the most apical portion of the root apex, six slices of 1 mm thickness were generated. Mechanical dislodgement resistance was examined using a universal pressure-testing machine and the push-out bond strength (POBS) was calculated. Specimens were examined under 20× magnification to define the bond failure mode. Statistical analysis was executed using ANOVA, post hoc Turkey test for pairwise comparisons and Kruskal-Wallis tests. RESULTS: The POBS of BioRoot® was significantly higher than the POBS of the two other sealers with a mean of 10.54 MPa ± 2.10 and 5.73 MPa ± 2.34, respectively (p < 0.001). Sealite® and K-Sealer® showed similar results in the median and coronal part. K-Sealer® revealed highest POBS compared with Sealite® in the apical part (p < 0.05). CONCLUSION: The POBS of the zinc oxide and calcium silicate-based sealer was significantly lower compared with calcium silicate. Sealite® and K-Sealer® exhibited almost same results. BioRoot showed the highest POBS of all sealers. CLINICAL SIGNIFICANCE: The current study was needed to evaluate the bond strength of three different cements to dentinal walls, by evaluating their respective POBS in vitro. The findings of this study may provide guidance for the clinician in the selection of an adequate endodontic sealer that guarantees an enhanced adhesive seal between the Gutta-percha and the dentinal canal walls. How to cite this article: Makhlouf MP, El Helou JD, Zogheib CE, et al. Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study. J Contemp Dent Pract 2024;25(1):15-19.

Comparative evaluation of dentinal tubule penetration and push-out bond strength of new injectable hydraulic calcium disilicate based root canal sealer: A single blinded in vitro study.

Objective: To evaluate and compare dentinal tubule penetration and push-out bond strength of BIO-C ION+, AH Plus and NanoSeal-S using Confocal Laser Scanning Microscopy (CLSM) and Universal Testing Machine (UTM). Materials & method: Sixty human mandibular premolars were prepared using ProTaper Gold till F3. Samples were then divided into 3 groups: Group I (n = 20) BIO-C ION + sealer, Group II (n = 20) AH Plus and Group III (n = 20) NanoSeal-S sealer. Groups were then sub-divided into two sub groups: In Subgroup A (n = 10) samples were obturated using single-cone with 0.1 % Rhodamine B dye and in Subgroup B (n = 10) samples were obturated using single cone. The samples were then transversely sectioned into coronal, middle and apical segments, samples in subgroup A & B were then submitted to CLSM analysis and UTM respectively. Results: The Bond Strength data showed following means (MPa): Group I Subgroup B: (BIO-C ION+) coronal (1.64), middle (1.25), apical (0.93); Group II Subgroup B: (AH Plus) coronal (2.20), middle (1.85) apical (1.38) and Group III Subgroup B: (NanoSeal-S) coronal (1.26), middle (0.94), apical (0.58). The dentinal tubule penetration data showed following means: (µm) Group I Subgroup A (BIO-C ION+) coronal (1184.69), middle (997.03), apical (637.26); Group II Subgroup-A AH Plus (864.14) and NanoSeal-S (495.64). Statistical analysis (two-way ANOVA, Tukey's Post Hoc Test) showed significant difference among sealers (p < 0.001) and root canal thirds (p < 0.001). Conclusion: The results of the study concluded that BIO-C ION + sealer showed maximum dentinal tubule penetration and AH Plus demonstrated maximum push-out bond strength.

Evaluation of the root dentin bond strength and intratubular biomineralization of a premixed calcium aluminate-based hydraulic bioceramic endodontic sealer.

PURPOSE: This study evaluated the dentin bonding strength and biomineralization effect of a recently developed premixed calcium aluminate-based endodontic sealer (Dia-Root Bio Sealer) in comparison with existing calcium silicate-based sealers. METHODS: The root canals of 80 mandibular premolars were filled with Dia-Root Bio Sealer, Endoseal MTA, EndoSequence BC Sealer, and AH Plus Bioceramic Sealer. Medial and apical specimens were then obtained by sectioning. The push-out bond strength was measured using the medial specimens, and the failure mode was recorded. Intratubular biomineralization in the apical specimens was analyzed using scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDS). The data were analyzed using one-way analysis of variance followed by the Tukey test (P < 0.05). RESULTS: The push-out bond strength of Dia-Root Bio Sealer was significantly higher than that of the other tested materials, and a cohesive failure pattern was observed in all groups. Dia-Root Bio Sealer also exhibited a significantly higher degree of biomineralization than the other groups, and EDS analysis indicated that the biomineralized precipitates were amorphous calcium phosphate. CONCLUSION: The results of this study indicate that Dia-Root Bio Sealer has the potential to be used as an adequate root canal sealer due to its favorable bonding performance.

Post retention strength of apical and conventional coating obturation methods using bioceramic sealer: a laboratory investigation.

BACKGROUND: Once bioceramic sealer (BCS) enters the dentinal tubules, it cannot be reliably removed. BCS-occupied dentinal tubules reduce fibre post retention strength. Coating gutta-percha with BCS only on the apical portion may improve post retention strength due to increased retention strength between the dentin and resin cement interface. The aim of the study was to test this hypothesis. METHODS: Root canals of 27 extracted human mandibular premolars were instrumented and randomly assigned to three obturation methods: conventional coating (CC), non-coating (NC), and apical coating (AC). The root canals were obturated with gutta-percha to 4 mm from the working length under an operating microscope. After the BCS was completely set, post spaces were prepared, and quartz fibre posts were cemented. The apical 4.5 mm of the roots were removed. Two samples were prepared at the apical, middle, and coronal root levels (one for scanning electron microscope (SEM) study and another for the push out bond strength (PBS) test). After the PBS test, the samples were examined with a stereo microscope to determine the failure mode: dentine-cement (DC), post-cement (PC) and mixed. The PBS data were analysed by One way ANOVA for the specific obturation method effects. Repeated ANOVA was used for the specific effects of the root levels on PBS in different obturation methods. RESULTS: At all three root levels, more continuous hybrid layers and denser resin tags were found in the NC and AC than the CC group. The AC and NC groups' PBS was significantly higher than the CC group at the apical 1/3 (p = 0.002 and p = 0.001) and coronal 1/3 (p = 0.016 and p = 0.041). The PBS in the CC group at the middle 1/3 was significantly higher than the apical 1/3 (p = 0.022). DC failure mode was most commonly found in the CC group, while PC failure mode was found most frequently in the NC and AC groups. CONCLUSIONS: The apical coating obturation method significantly increased PBS over the conventional coating method, potentially reducing fiber post dislodgement. However, this study was only preliminary. Clinical studies are required to confirm the results.

Push-out bond strength and SEM fractographical analysis of hollow fibre posts used with self-adhesive resin cement: a pilot study.

Detachment is the major cause of failure of endodontic fibre posts. Hollow posts have been recently introduced to overcome such issue. The primary aim of this pilot study was to compare the push-out bond strength of hollow posts and traditional solid posts. Eight round-shaped single-canal premolars extracted for periodontal reason were selected as sample and equally randomized into two groups: (i) traditional solid fibre posts-TECH21xop and ii) hollow fibre posts-TECHOLE. A dual-curing self-adhesive cement (new TECHCEM) was used for posts placement. Six horizontal sections-two from each portion of the root (coronal, middle and apical)-were obtained from each sample root, yielding a total of 24 sections for each group. Push-out test was performed on the sections and bond strength values were compared between groups and within each group. Scanning electron microscope (SEM) fractographical analysis was conducted on each section. Additional SEM and EDX analyses were performed on new samples of both posts, to assess fibres density and distribution, and the chemical composition of the fibres and the matrix. Hollow posts showed a significantly higher push-out bond strength (6.36 ± 1.22 MPa) than solid posts (3.64 ± 1.62 MPa). Among the three root portions of the same group, there was no significant difference in bond strength. In both groups, the most frequent type of fracture was a mixed adhesive failure with the cement covering 0 to 50% of the post perimeter. Hollow post fibres appear more similar in size and have a more homogeneous distribution, compared to solid posts. The two post types also have different chemical compositions.

Effect of silver diamine fluoride activation on bond strength to root dentin.

BACKGROUND: To investigate the effect of silver diamine fluoride (SDF) application and activation on the bond strength of gutta-percha to dentin and resin bonded post to dentin. METHODS: Thirty-six human premolar teeth were used. The coronal part tooth was removed, and endodontic mechanical preparation was performed for all the teeth. The teeth were divided according to final rinse protocol (n = 9) as follows: Control group; no SDF application, SDF/NA; 38% SDF as a final rinse with no activation, SDF/MDA; 38% SDF as a final rinse with manual dynamic activation and SDF/US; 38% SDF as a final rinse with ultrasonic activation. Root canal obturation using lateral condensation technique followed by fiber post insertion after 48 h in the root canal after corresponding preparations. The roots were cut with a low-speed precision saw creating 2 mm thickness sections. A total of 4 sections were obtained from each tooth, 2 coronal specimens (with post) and 2 apical specimens (with Gutta percha). Each specimen was subjected to push-out bond strength test with a universal testing machine. Data were analyzed using two-way ANOVA. RESULTS: The Push-out bond strength at the apical root section was significantly higher in SDF/MDA and SDF/US groups compared to control group. While for the coronal part, all SDF treated specimen showed reduced Push-out bond strength. CONCLUSION: SDF application as final rinse may reduce the bonding performance between fiber post and dentine. Activation with manual and ultrasonic methods improved the bond strength at the apical root section.

Influence of long -term thermal cycling and masticatory loading simulation on bond strength of roots filled with epoxy resin and calcium silicate based sealers.

BACKGROUND: The aim of this study was to evaluate the effect of thermal and mechanical cyclic aging using a mastication simulator on push-out bond strength of mandibular premolars obturated with AH Plus and BioRoot RCS root canal sealers. METHODS: With REVO-S files up to SU/0.06 taper, 48 single-rooted premolar teeth were instrumented. The teeth were randomly divided into two main groups (n = 24) based on the two root canal sealers used (AH Plus and BioRoot RCS). All teeth were obturated with h matched-taper single-cone. Each main group was then subdivided into three subgroups (A, B, and C) (n = 8). Group A served as the negative control group (no-thermocycling aging). While groups B and C were subjected to thermal changes in a thermocycler machine (15,000 and 30,000 thermal cycles, respectively), followed by two different dynamic loading periods, 3 × 105 and 6 × 105 in a masticatory simulator with a nominal load of 5 kg at 1.2 Hz which represent roughly 1½ and 3 years of clinical function respectively. 2 mm slice at 3 levels, apical, middle, and coronal, to obtain 3 sections were prepared and subjected to push-out test using a universal testing machine. Statistical analysis was performed using analysis of variance (ANOVA) followed by a Tukey post hoc comparisons test and an independent T-test. A significance level of 5% was used. RESULTS: After thermal-mechanical cyclic aging, the two root canal sealers showed a significantly decreased in push-out bond strength (p < 0.05), however, AH Plus had significantly higher bond strength values than BioRoot RCS after cycling aging. CONCLUSIONS: It could be concluded that thermal-mechanical cyclic aging had a significant impact on the outcome of the dislodgment resistance of AH Plus and BioRoot RCS.

Particulate Filler and Discontinuous Fiber Filler Resin Composite's Adaptation and Bonding to Intra-Radicular Dentin.

The aim of this study was to assess adaptation and bonding to root canal dentin of discontinuous (short) glass fiber-reinforced composite to intra-radicular dentin (DSGFRC). METHODS: Seventy virgin human teeth were extracted and then endodontically treated; then samples were randomly divided into 7 groups (n = 10), based on the materials' combinations as follows: Group 1, a two-bottle universal adhesive + DSGFRC; Group 2, a single-component universal adhesive + DSGFRC; Groups 3 and 4, the same materials of Goups 1 and 2 were used but after cleaning of the canal walls with 17% EDTA and final irrigation with 5.25% NaOCl Ultrasound Activated (UA); Group 5, traditional prefabricated fiber posts were luted after being silanized with G-Multi Primer; Groups 6 and 7, like Group 5 but after ultrasonic irrigation (UA). All sample roots were cut 1 mm thick (n = 10) to be evaluated regarding root canal adaptation using a light microscope and scanning electron microscope (SEM) and push-out bond strength. These results were statistically analyzed by Kruskal-Wallis analysis of variance by ranks. The level of significance was set at p < 0.05. RESULTS: Bond strength forces varied between 6.66 and 8.37 MPa and no statistically significant differences were recorded among the groups. By microscopic examination, it was noted that ultrasonic irrigation increased the adaptation of the materials to the dentin surface. CONCLUSIONS: Within the limitations of this in vitro study, it may be concluded that when DSGFRC was used for intracanal anchorage in the post-endodontic reconstruction, similar push-out retentive force and strength to those of traditional fiber posts cemented with particulate filler resin composite cements were achieved.

Effect of different irrigants on the push-out bond strength of biodentine and TheraCal LC when used for perforation repair in simulated condition.

Background: Perforation repair materials should have excellent sealing ability and dislodgement resistance. While several materials have been employed for perforation repair, newer calcium-silicate materials, such as Biodentine and TheraCal LC, have shown promising outcomes. Aims: This study aimed to evaluate the effect of different irrigants on the dislodgement resistance of Biodentine and TheraCal LC when used for perforation repair in simulated conditions. Methods and Material: 3% sodium hypochlorite, 2% chlorhexidine gluconate, and 17% EDTA were evaluated for their effect on the dislodgement resistance of Biodentine and TheraCal LC. 48 permanent mandibular molars were selected for the study. The samples were divided into two groups: Group I - Biodentine and Group II - TheraCal LC, with 24 samples each. Statistical Analysis: The mean dislodgement resistance and standard deviation of Group I (Biodentine) and Group II (TheraCal LC) were compared and Failure pattern analysis was done. Results: Biodentine showed a significant decrease in push-out bond strength after contact with 3% NaOCl, 2% CHX, and 17% EDTA whereas, TheraCal LC showed no significant decrease in push-out bond strength after exposure to 3% NaOCl, 2% CHX, and 17% EDTA. Conclusions: Overall, TheraCal LC can be considered good perforation repair material with excellent physical and biological properties.

The adhesive strength of fiber post-to-canal dentin with Aniline green, Fotoenticine activated by PDT, green tea, and ozone as a final irrigant.

AIM: The effect of novel final disinfection protocols Malachite green (MG), Fotoenticine® (FTC), Green tea extract (GTE), and Ozonated water (OW) on the bond strength of prefabricated glass fiber posts (PGFP) adhered to canal dentin. MATERIAL AND METHOD: The canals of fifty premolars with closed apices were cleansed and obturated. The specimens were randomly assigned to one of five groups based on the final irrigant used, with the control group receiving NaOCl+EDTA and the experimental groups receiving MG, FTC, OW, and GTE. The GFP was cemented with a self-etching, dual-cure paste; the bond strength was estimated with a universal testing machine; and failure analysis was conducted with a stereomicroscope. RESULTS: The highest PBS was observed in the coronal third of Group 4 (using ozonated water as the final irrigant), whereas the lowest bond integrity was observed in the apical section of Group 2 (1.02-0.54 MPa) using Malachite green as the final irrigant. Group 1, Group 4, and Group 5 exhibited no significant difference in the bond integrity of GFP to dentin when compared to Group 2 (p>0.05). In addition, comparable bond score values were obtained for Groups 2 and 3 (p>0.05). CONCLUSION: The results of this study suggest that OW and GTE may be effective final disinfectants for root canals, as they increase the bond strength of resin-luting cement.

The effect of carbodiimide on push-out bond strength of fiber posts and endogenous enzymatic activity.

BACKGROUND: To investigate the effect of 0.3 M 1-ethyl-3(3-dimethylaminopropyl) carbodiimide (EDC) aqueous solution pretreatment on push-out bond strength (PBS) and matrix-metalloproteinases (MMPs) activity within radicular dentin when different post cementation strategies were employed. METHODS: One hundred and twenty monoradicular human teeth were endodontically treated and randomly divided into six groups, depending on the cementation strategy and root dentin pretreatment (n = 20): EAR: cementation with an etch-and-rinse adhesive (LuxaBond Total Etch, DMG) and resin cement (LuxaCore Z Dual, DMG); EAR/EDC: 1 min EDC pretreatment after etching + EAR; SE: cementation with a self-etch primer (Multilink Primer, Ivoclar Vivadent) and corresponding cement (Multilink Automix, Ivoclar Vivadent); SE/EDC: self-etch primer + EDC pretreatment + SE; SA: cementation with a universal self-adhesive cement (RelyX Universal, 3 M); SA/EDC: EDC pretreatment + SA. Slices were submitted to PBS test and interfacial nanoleakage evaluation 24 h after cementation or after thermocycling (40.000 cycles, 5-55 °C). To investigate the effect of EDC on MMPs activity, 4 additional first maxillary premolars per group were processed for in situ zymography analysis. Multivariate ANOVA and post hoc Tukey tests were used to analyze PBS values. The data from in situ zymography were analyzed with Kruskal-Wallis test and Dunn's pairwise multiple comparison procedures (α = 0.05). RESULTS: The variables "EDC pretreatment", "root region" and "thermocycling" significantly influenced PBS (p < 0.05), while the variable "cementation strategy" had no influence (p > 0.05). Thermocycling significantly reduced PBS in SE and SA groups (p < 0.05). EDC was effective in preserving PBS after artificial aging. EDC pretreatment significantly reduced enzymatic activity at baseline in EAR and SE groups, and in SA group after thermocycling (p < 0.05). CONCLUSIONS: The use of EDC prevents the reduction of bond-strength values after artificial aging and silences endogenous enzymatic activity within radicular dentin when different cementation strategies were employed.