RESUMO
Limited scientific evidence exists on phosphorus immobilization under autogenetic electrochemical reactions in composting systems. This study exploited a composting procedure using microbial fuel cell (MFC) to ascertain phosphorus redistribution during composting process. Compared to the control without MFC equipment, MFC-assisted treatment yielded a 13 % decrease in phosphorus availability due to the transformation of exchangeable fraction (Ex-P) to aluminum-bound (Al-P) and calcium-bound (Ca-P) fractions. During the composting process, organic humification primarily controlled phosphorus redistribution and immobilization. Biotic factors, including bacterial communities (i.e., Firmicutes, Proteobacteria, Bacteroidota, and Gemmatimonadota) and functional enzymes (i.e., acid phosphatase, alkaline phosphatase, phytase, and C-P lyase), significantly influenced phosphorus availability in the composting systems. Temperature-dependent composting phases restricted microbial actions on phosphorus transformation. These findings highlight the mechanisms underlying phosphorus transformation in composting systems, and provide valuable insights for advancing composting technology and protecting agricultural ecosystems.
RESUMO
Antibiotic overuse in poultry feeds has disastrous implications; consequently, long-term alternatives must be developed. As a result, the current study aims to assess the impact of Aspergillus niger filtrate (ANF) high in organic acids grown on agro-industrial residue of faba bean (AIRFB) on quail diet, as well as their influence on bird productivity, digestion, carcass yield, blood chemistry, and intestinal microbiota. A total of 240 Japanese quails (aged 7 d) were used in this study, divided equally among 5 experimental groups with 48 quails each. Group 1 (G1) received a basal diet without any ANF, group 2 (G2) received a basal diet supplemented with 0.5 mL ANF/kg diet, group 3 (G3) received a basal diet supplemented with 1.0 mL ANF/kg diet, group 4 (G4) received a basal diet supplemented with 1.5 mL ANF/kg diet, and group 5 (G5) received a basal diet supplemented with 2 mL ANF/kg diet. The performance parameters were monitored at 1 to 3, 3 to 5, and 1 to 5 wk. Adding ANF increased body weight at 3 and 5 wk, as well as body weight gain at 1 to 3, 3 to 5, and 1 to 5 wk, compared to the control diet. The ANF fed quails had the highest feed conversion ratio compared to the control group. The addition of ANF to the quail diet had no effect on the weight of the carcass, gizzard, heart, liver, giblets, or dressing; however, it did lower triglycerides, low-density lipoprotein, and very low-density lipoprotein while increasing high-density lipoprotein levels. The quail groups that received ANF had enhanced immunological indices such as IgG, IgM, IgA, and lysozymes. It also increased the levels of superoxide dismutase and total antioxidant contents, as well as catalase, and digestive enzymes such as protease, amylase, and lipase. However, it lowered the blood MDA levels compared to control. It has been demonstrated that the total gut microbiota, Escherichia coli, total coliforms, and the population of Salmonella are all reduced in ANF-fed quails. Histological examination of ANF quails' liver and intestinal sections revealed normal hepatic parenchyma, typical leaf-like intestinal villi, and comparatively short and frequently free lumina. In conclusion, Japanese quail showed improvements in performance, digestive enzymes, antioxidant indices, immunity, and capacity to reduce intestinal pathogenic bacteria after consuming diet supplemented with ANF.
Assuntos
Ração Animal , Antioxidantes , Coturnix , Dieta , Suplementos Nutricionais , Microbioma Gastrointestinal , Vicia faba , Animais , Coturnix/fisiologia , Ração Animal/análise , Dieta/veterinária , Suplementos Nutricionais/análise , Vicia faba/química , Antioxidantes/metabolismo , Fermentação , Fenômenos Fisiológicos da Nutrição Animal/efeitos dos fármacos , Aspergillus niger , Análise Química do Sangue/veterinária , Masculino , Distribuição AleatóriaRESUMO
The Japanese plum tree (Prunus salicina Lindl.) is mainly cultivated in temperate areas of China and some European countries. Certain amounts of wood (from pruning works) are generated every year from this crop of worldwide commercial significance. The main objective of this work was to value this agricultural woody residue, for which the chemical composition of pruning wood extracts from six Japanese plum cultivars was investigated, and the antiproliferative activity of extracts and pure phenolics present in those extracts was measured. For the chemical characterization, total phenolic content and DPPH radical-scavenging assays and HPLCâDAD/ESIâMS analyses were performed, with the procyanidin (-)-ent-epicatechin-(2αâOâ7,4αâ8)-epicatechin (5) and the propelargonidin (+)-epiafzelechin-(2ßâOâ7,4ßâ8)-epicatechin (7) being the major components of the wood extracts. Some quantitative differences were found among plum cultivars, and the content of proanthocyanidins ranged from 1.50 (cv. 'Fortune') to 4.44 (cv. 'Showtime') mg/g of dry wood. Regarding the antitumoral activity, eight wood extracts and four phenolic compounds were evaluated in MCF-7 cells after 48 h of induction, showing the wood extract from cv. 'Songold' and (â)-annphenone (3), the best antiproliferative activity (IC50: 424 µg/mL and 405 µg/mL, respectively).
Assuntos
Extratos Vegetais , Madeira , Humanos , Madeira/química , Extratos Vegetais/farmacologia , Extratos Vegetais/química , Proliferação de Células/efeitos dos fármacos , Antineoplásicos Fitogênicos/farmacologia , Antineoplásicos Fitogênicos/química , Prunus domestica/química , Fenóis/química , Fenóis/farmacologia , Fenóis/análise , Cromatografia Líquida de Alta Pressão , Células MCF-7 , Prunus/química , Linhagem Celular Tumoral , Antineoplásicos/farmacologia , Antineoplásicos/química , Antioxidantes/farmacologia , Antioxidantes/químicaRESUMO
Anaerobic co-fermentation of swine manure (SM) and apple waste (AW) restricts by the slow hydrolysis of substrates with complex structures, which subsequently leads to low lactic acid (LA) production. Therefore, a novel strategy based on enzymatic pretreatment for improving LA production from anaerobic co-fermentation of SM and AW was proposed in this study. The results indicated that the maximal LA concentration increased from 35.89 ± 1.84 to 42.70 ± 2.18 g/L with the increase of enzyme loading from 0 to 300 U/g VSsubstrate. Mechanism exploration indicated that enzymatic pretreatment significantly promoted the release and hydrolysis of insoluble organic matter from fermentation substrate, thus providing an abundance of reaction intermediates that were directly available for LA production. Additionally, bacteria analysis revealed that the high concentration of LA was associated with the prevalence of Lactobacillus. This study offered an environmental-friendly strategy for promoting SM and AW hydrolysis and provided a viable approach for recovering valuable products.
Assuntos
Fermentação , Ácido Láctico , Malus , Esterco , Animais , Hidrólise , Ácido Láctico/biossíntese , Suínos , Resíduos , AnaerobioseRESUMO
Globally, huge amounts of cotton and sunflower stalks are generated annually. These wastes are being underutilized since they are mostly burned in the fields. So, in this work, we proposed a three-step method consisting of acid pre-treatment, alkaline hydrolysis, and bleaching for the extraction of cellulose pulps. These pulps were characterized to assess their morpho-structural and thermal properties. The design of experiments and response surface methodology were used for the optimization of the acid pre-treatment in order to achieve maximum removal of non-cellulosic compounds and obtain pulps enriched in cellulose. For cotton stalks, optimal conditions were identified as a reaction time of 190 min, a reaction temperature of 96.2 °C, and an acid (nitric acid) concentration of 6.3%. For sunflower stalks, the optimized time, temperature, and acid concentration were 130 min, 73.8 °C, and 8.7%, respectively. The pulps obtained after bleaching contained more than 90% cellulose. However, special care must be taken during the process, especially in the acid pre-treatment, as it causes the solubilization of a great amount of material. The characterization revealed that the extraction process led to cellulose pulps with around 69-70% crystallinity and thermal stability in the range of 340-350 °C, ready to be used for their conversion into derivatives for industrial applications.
RESUMO
When the cocoa pod husk (CPH) is used and processed, two types of flour were obtained and can be differentiated by particle size, fine flour (FFCH), and coarse flour (CFCH) and can be used as a possible reinforcement for the development of bio-based composite materials. Each flour was obtained from chopping, drying by forced convection, milling by blades, and sieving using the 100 mesh/bottom according to the Tyler series. Their physicochemical, thermal, and structural characterization made it possible to identify the lower presence of lignin and higher proportions of cellulose and pectin in FFCH. Based on the properties identified in FFCH, it was included in the processing of thermoplastic starch (TPS) from the plantain pulp (Musa paradisiaca) and its respective bio-based composite material using plantain peel short fiber (PPSF) as a reinforcing agent using the following sequence of processing techniques: extrusion, internal mixing, and compression molding. The influence of FFCH contributed to the increase in ultimate tensile strength (7.59 MPa) and higher matrix-reinforcement interaction when obtaining the freshly processed composite material (day 0) when compared to the bio-based composite material with higher FCP content (30%) in the absence of FFCH. As for the disadvantages of FFCH, reduced thermal stability (323.57 to 300.47 °C) and losses in ultimate tensile strength (0.73 MPa) and modulus of elasticity (142.53 to 26.17 MPa) during storage progress were identified. In the case of TPS, the strengthening action of FFCH was not evident. Finally, the use of CFCH was not considered for the elaboration of the bio-based composite material because it reached a higher lignin content than FFCH, which was expected to decrease its affinity with the TPS matrix, resulting in lower mechanical properties in the material.
RESUMO
The increasing trend of using agricultural wastes follows the concept of "waste to wealth" and is closely related to the themes of sustainable development goals (SDGs). Carbon-neutral technologies for waste management have not been critically reviewed yet. This paper reviews the technological trend of agricultural waste utilization, including composting, thermal conversion, and anaerobic digestion. Specifically, the effects of exogenous additives on the contents, fractionation, and fate of phosphorus (P) and potentially toxic elements (PTEs) during the composting process have been comprehensively reviewed in this article. The composting process can transform biomass-P and additive-born P into plant available forms. PTEs can be passivated during the composting process. Biochar can accelerate the passivation of PTEs in the composting process through different physiochemical interactions such as surface adsorption, precipitation, and cation exchange reactions. The addition of exogenous calcium, magnesium and phosphate in the compost can reduce the mobility of PTEs such as copper, cadmium, and zinc. Based on critical analysis, this paper recommends an eco-innovative perspective for the improvement and practical application of composting technology for the utilization of agricultural biowastes to meet the circular economy approach and achieve the SDGs.
Assuntos
Agricultura , Compostagem , Fósforo , Fósforo/análise , Agricultura/métodos , Compostagem/métodos , Gerenciamento de Resíduos/métodosRESUMO
Microcrystalline cellulose (MCC) is one of the essential functional excipients in the formulation of tablets. The need for cheaper MCC sources has drawn significant attention to exploring renewable sources. In this study, MCC was produced from soybean hull (SBH), the primary by-product of the soy industry, using a novel, simplified, and cost-effective approach. Various characterization techniques were used to study the physicochemical properties and micromeritics of the SBH-based MCC powders and compare them to those of the commercial Avicel PH-101. SBH MCCs had a larger particle size, a broader particle size distribution, a higher degree of polymerization, a higher degree of crystallinity, better thermal stability, and slightly superior flowability and compressibility than Avicel PH-101. The tableting blends (containing 60 % MCC) were prepared, and the post-compression out-of-die Heckel analysis showed that formulations with aggregated SBH MCCs were less ductile than those made with Avicel PH-101, resulting in a lower porosity (better compressibility) of the latter at higher compression pressures. The hardness values for all formulations were above 6 kg, with higher values for those made with Avicel PH-101. The lubricant sensitivity was lower for SBH MCCs. All tablets made using developed formulations showed very low friability (<0.1 %) and short disintegration times (<90 s), making them well-suited candidates for manufacturing orally disintegrating tablets (ODTs).
Assuntos
Celulose , Excipientes , Glycine max , Pós , Comprimidos , Celulose/química , Glycine max/química , Excipientes/química , Tamanho da Partícula , Composição de Medicamentos/métodosRESUMO
Supercapacitors have emerged as highly efficient energy storage devices, relying on electrochemical processes. The performance of these devices can be influenced by several factors, with key considerations including the selection of electrode materials and the type of electrolyte utilized. Transition metal oxide electrodes are commonly used in supercapacitors, as they greatly influence the electrochemical performance of these devices. Nonetheless, ferrites' low energy density poses a limitation. Hence, it is crucial to create electrode materials featuring unique and distinct structures, while also exploring the ideal electrolyte types, to enhance the electrochemical performance of supercapacitors incorporating magnesium ferrites (MF). In this study, we effectively prepared magnesium ferrites (MgFe2O4) supported on activated carbon (AC) derived from orange peels (OP) using a simple hydrothermal method. The resulting blends underwent comprehensive characterization employing various methods, including FTIR, XRD, TEM, SEM, EDX, and mapping analysis. Moreover, the electrochemical performance of MgFe2O4@AC composites was evaluated using GCD and CV techniques. Remarkably, the MF45-AC electrode material showed exceptional electrochemical behavior, demonstrating a specific capacitance of 870 F·g-1 within current density of 1.0 A g-1 and potential windows spanning from 0 to 0.5 V. Additionally, the prepared electrodes displayed exceptional cycling stability, with AC, MF, and MF45-AC retaining 89.6%, 94.2%, and 95.1% of their initial specific capacitance, respectively, even after 5000 cycles. These findings underscore the potential of MF-AC composites as superior electrode materials for supercapacitors. The development of such composites, combined with tailored electrolyte concentrations, holds significant promise for advancing the electrochemical performance and energy density of supercapacitor devices.
RESUMO
BACKGROUND: Cellulase is considered a group member of the hydrolytic enzymes, responsible for catalyzing the hydrolysis of cellulose and has various industrial applications. Agricultural wastes are used as an inexpensive source for several utilizable products throughout the world. So, searching for cellulase enzymes from fungal strains capable of utilizing agricultural wastes to increase productivity, reduce costs and overcome waste accumulation in the environment is very important to evaluate its potency as a bio-additive to detergent agents. RESULTS: In the current study, the previously identified fungal strain Aspergillus terreus MN901491 was screened and selected for cellulase production. Medium parameters were optimized using one-factor-at-a-time (OFAT) and multi-factorial (Plackett-Burman and Box-Behnken) design methods. OFAT showed the ability of the fungal strain to utilize agricultural wastes (corn cob and rice straw) as a substrate. Also, yeast extract was the best nitrogen source for enhancing cellulase productivity. The most significant variables were determined by Plackett-Burman Design (PBD) and their concentrations were optimized by Response Surface Methodology (RSM) using Box-Behnken Design (BBD). Among eleven independent variables screened by PBD, malt extract, (NH4)2SO4, and KCl were the most significant ones followed by rice straw which affected cellulase production positively. The ANOVA results particularly the R2-value of PBD (0.9879) and BBD (0.9883) confirmed the model efficiency and provided a good interpretation of the experiments. PBD and BBD improved cellulase productivity by 6.1-fold greater than that obtained from OFAT. Medium optimization using OFAT and statistical models increased cellulase production from A. terreus MN901491 by 9.3-fold compared to the non-optimized medium. Moreover, the efficiency of cellulase activity on cotton fabrics as a bio-additive detergent was evaluated and estimated using whiteness and scanning electron microscope (SEM) that affirmed its potential effect and remarkable detergent ability to improve whiteness by 200% in comparison with non-washed fabric and by 190% in comparison with fabric washed by water. CONCLUSION: The presented work was stabilized as a multi-efficiency in which wastes were used to produce cellulase enzyme from the fungal strain, Aspergillus terreus MN901491 as a bio-additive to detergent applications that involved ecofriendly and green processes.
Assuntos
Celulase , Oryza , Detergentes , Aspergillus , Projetos de PesquisaRESUMO
This study explores the conversion of agricultural waste into valuable industrial precursors, specifically focusing on the production of silica nanoparticles from rice husk (RH) via calcination and sol-gel processes. The synthesized particles underwent detailed analysis to assess their chemical composition, structural features, morphological characteristics, and size distribution. This comparative analysis evaluates the effectiveness of various methods in generating silica from RH and examines the impact of different drying techniques, including freeze-drying and conventional thermal drying, on the properties of the resulting silica nanoparticles. Utilizing a combination of sol-gel and freeze-drying techniques produced spherical nanoparticles with diameters of 10 to 20 nm, characterized by size uniformity, clear contours, and minimal aggregation. X-ray diffraction (XRD) analysis identified the amorphous nature of the silica, as evidenced by diffraction peaks typical of amorphous silica in the RH-derived samples processed via different methods. Significantly, the XRD patterns of the calcination-derived silica showed no foreign peaks, indicating a purer amorphous state. The findings of this study are anticipated to contribute to the development of innovative and efficient silica nanomaterials, fostering the sustainable use of agricultural waste.
RESUMO
Anaerobic co-digestion of waste wheat straw and horse manure in two steps was revealed as a promising option for renewable energy production in the form of hydrogen and methane. Addition of waste cooking oils, disposal of which could cause damage to health or the environment, as a third substrate for digestion, is suggested as an approach not only to help handle the increasing volume of food waste worldwide but also to improve process performance. In the present study, waste cooking oil, in a concentration of 5%, appeared to be a positive modulator of anaerobic digestion with the production of hydrogen and did not lead to inhibition of the hydrolysis phase. The overall efficiency of the two-stage anaerobic digestion of the mixture, which contains mainly lignocellulose waste, is positively dependent on thermochemical pretreatment with the alkali reagent (Ca(OH)2), but elevated temperature (55 °C) and cooking oil addition revealed the opportunity to omit the pre-treatment step. Nevertheless, the overall energy production was lower due to the methane production step. However, the addition of waste cooking oils to the process in which lig-nocellulose is not pretreated (V3) led to an increase in the methane production and energy yield compared to V1. The anaerobic digestion of lignocellulosic waste is a complex process and comprises successive degradation pathways and syntrophic microbial associations' activities, so the division in two reactors ensured suitable conditions for the microorganisms residing in each of them. In this study, along with the production of hydrogen and methane and the separation of the hydrolysis and methanogenesis stages, utilization of agriculture- and kitchen-generated wastes was realized in the context of waste-to-energy sustainable production methods.
RESUMO
Agricultural wastes, comprising cotton straw and livestock manure, can be effectively managed through aerobic co-composting. Nevertheless, the quality and microbial characteristics of co-composting products from different sources remain unclear. Therefore, this study utilized livestock manure from various sources in Xinjiang, China, including herbivorous sheep manure (G), omnivorous pigeon manure (Y), and pigeon-sheep mixture (GY) alongside cotton stalks, for a 40-day co-composting process. We monitored physicochemical changes, assessed compost characteristics, and investigated fungal community. The results indicate that all three composts met established composting criteria, with compost G exhibiting the fastest microbial growth and achieving the highest quality. Ascomycota emerged as the predominant taxon in three compost products. Remarkably, at the genus level, the biomarker species for G, Y, and GY are Petromyces and Cordyceps, Neurospora, and Neosartorya, respectively. Microorganisms play a pivotal role in organic matter degradation, impacting nutrient composition, demonstrating significant potential for the decomposition and transformation of compost components. Redundancy analysis indicates that potassium, total organic carbon, and C:N are key factors influencing fungal communities. This study elucidates organic matter degradation in co-composting straw and livestock manure diverse sources, optimizing treatment for efficient agricultural waste utilization and sustainable practices.
Assuntos
Compostagem , Micobioma , Animais , Ovinos , Solo/química , Esterco/microbiologia , Gado , GossypiumRESUMO
Sugarcane leaf waste, a byproduct of the growing global sugar industry, challenges agricultural waste management. This study explores its potential for methane production via anaerobic digestion. A microbial pre-hydrolysis, using lignocellulose-degrading bacteria, enhanced soluble chemical oxygen demand at an optimal initial substrate concentration of 40 g-volatile solid/L. Comparative analysis with untreated and bioaugmented leaves revealed the pre-hydrolyzed leaves achieved the highest methane production rate (MPR) at 14.0 ± 0.5 mL-CH4/L·d, surpassing others by 1.47 and 1.67 times. Two continuous stirred tank reactors were employed to assess the optimal hydraulic retention time (HRT). Results showed a stable methane production with an HRT of 25 days, yielding high MPRs: 88.70 ± 0.63 mL-CH4/L·d from pre-hydrolyzed sugarcane leaves and 82.57 ± 1.22 mL-CH4/L·d from microbial consortium-augmented leaves. A 25-day HRT fosters high microbial diversity with Bacteroidota, Firmicutes, Chloroflexi, and Verrucomicrobiota dominance, indicating favorable conditions. Conversely, a 20-day HRT results in lower diversity due to unfavorable factors like low pH during organic overloading, leading to increased concentrations of volatile fatty acids and lactic acid, with Firmicutes as the predominant phylum. This study highlights sugarcane leaf waste's potential as a valuable resource for sustainable methane production.
RESUMO
A large amount of agricultural waste is produced annually. Producing biochar is an excellent solution for waste management, resource recovery, emission reduction, energy production, reduction in transportation and enhancing carbon sequestration. This study was done to investigate the aeration status of biochar-based growth media as compared with the commercial soilless medium of cocopeat-perlite. Biochars from oven-dried residues were produced by slow pyrolysis at 300 (B300) and 500°C (B500) with a rate of 2°C min-1 and using a continuous inflow of nitrogen. Sawdust (Sd), wheat straw (WS), rice hull (Rh), palm bunches (Plm) and sugarcane bagasse (SC), their biochars, vermiculite (V) and zeolite (Z) were used to prepare 13 mixed growth media. Oxygen diffusion coefficient (Dp) of media was measured at six matric potentials (h) of -5, -10, -15, -20, -40 and -60 hPa. Troeh et al. (1982) model was fitted to Dp/D0 versus air-filled porosity (AFP) data. Although AFP was more than 0.1 m3 m-3 for some media, the Dp/D0 was very low. Considering optimum Dp/D0 (i.e. 0.010-0.015) for growth substrates at h = -8 hPa, aeration status of four media (cocopeat-perlite, Rh-SCB300-Z, Sd-SCB300-Z and WSB500-Rh-V) was optimum. Highest Dp/D0 at h = -8 hPa was observed for Rh-SCB300-Z. The AFP at h = -10 hPa was highest for Rh-SCB300-Z, cocopeat-perlite and WSB500-Rh-V. Biochar-based media with good aeration status and water retention can be a suitable substitute for commercial soilless culture in greenhouse production. Overall, WSB500-Rh-V is a suitable substitute for cocopeat-perlite.
RESUMO
Biochar production is an effective approach to managing abundant agricultural wastes. Pruning wastes from trimming the branches of trees such as carambola and mango, as well as coconut shells, are among the agricultural wastes that have reutilisation potential, which would simultaneously reduce the space required for disposal. In this study, the potential use of these wastes by converting them into biochar was investigated. The data presented in this study highlight the design of a pyrolysis system for a low-temperature slow pyrolysis process, as well as the characterisation data of the biochar produced using this system. The data collected included the elemental composition, porosity, as well as surface and adsorption characteristics of the biochar. These data indicate that the biochar produced had certain qualities that would enable its use for specific agricultural and industrial purposes. Meanwhile, the design indicated that it could facilitate small farms with specific outputs. In brief, these data can be used as references for developing a small-scale system for agricultural waste management using different types of crops.
RESUMO
This study aimed to combine various natural pH indicators of anthocyanin from Karanda (CA) with anthocyanin from butterfly pea flower (BA) or curcumin (CC) to improve the sensitivity of CA. CA75/BA25 and CA25/CC75 enhanced the sensitivity of the endpoint colour change of CA. A smart colorimetric sensing film was also developed and characterised by loading different natural pH indicators on carboxymethyl cellulose (CMC) films. The addition of different natural pH indicators increased the thickness, elongation, colour (a* and b* values), and contact angle of CMC films (p < 0.05). However, the tensile strength, water vapour permeability, film solubility, light transmission, and L* value decreased when different natural pH indicators were added (p < 0.05). The indicator films demonstrated enhanced antioxidant capacity and thermal stability. The FTIR spectra showed that natural pH indicators were successfully immobilised into the CMC films. Notably, the CMC/CA75/BA25 film was the most sensitive film to changes in volatile ammonia and different pH buffer solutions. The CMC/CA75/BA25 film changed from purple to green with exposure to ammonia solution and from pink to purple to blue to green with increasing pH. Therefore, the CMC/CA75/BA25 film has potential as a colorimetric sensing film, providing a more accurate assessment result.
Assuntos
Carboximetilcelulose Sódica , Colorimetria , Antocianinas , Amônia , Concentração de Íons de Hidrogênio , Embalagem de AlimentosRESUMO
Agricultural waste biochar was widely used to absorb phosphorus (P) from eutrophicated water and soil remediation. However, the research on the reuse of the sorbed P on biochar in infertile saline soil is insufficient. Biochars derived from four kinds of agricultural wastes (cotton straws from two origins, maize stalk, and rice husk) were modified and applied to adsorb phosphate in waste water and then be reused in saline soil in this study. The co-modified method combining ball milling and metal coated treatment obtained the higher specific surface area (SSA) of ferrite/manganese modified-ball-milled biochars (Fe/Mn-BMBCs) (226.5-331.5 m2 g-1) than that of pristine biochars (14.02-30.35 m2 g-1) and ferrite/manganese modified biochar (Fe/Mn-BC) (223.7 m2 g-1), which could improve the pore structure of metal modified biochar. The phosphate adsorption capacity (qmax) of Fe/Mn-BMBCs with rich functional groups and high SSA were 44.0-53.8 mg g-1, which was 4.47-5.82 times higher than that of pristine biochars. Fe/Mn-BMBCs showed efficiently adsorption performance at low pH and high temperature. The application of BC to saline soil could promote the availability of P in saline soil. P-loaded biochars could afford P as a nutrient to promote the growth of lettuce (Lactuca sativa L.) in saline soil. The lettuce fresh weight in Fe/Mn-BMBC-P2 treated soil was 8.21 times higher than that grew in control check (CK) treatment. As a P element provider, P-loaded biochars not only improve saline soil fertility and crop productivity, but also convert the agricultural wastes and P in eutrophicated waters to the sustainable resource.
Assuntos
Compostos Férricos , Manganês , Solo , Solo/química , Fosfatos , Adsorção , Carvão Vegetal/químicaRESUMO
The idea of utilizing waste from the agro-industrial sector to produce lightweight concrete is one of the good ideas for recycling and reusing waste materials. In a lightweight concrete production process, determining a material's optimal parameters is crucial, since it can help optimize the important properties of lightweight concrete blocks. This study introduces a novel TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) linear programming model, based on the Response Surface Methodology (RSM), to optimize the parameters of lightweight concrete blocks. The compressive strength, dry density, and water absorption are considered important responses, while black bagasse ash, cement with white bagasse ash, and aluminum powder are the factors considered. The proposed method successfully optimized the parameters, as confirmed by experimental results, showing a 7.22% increase in compressive strength, a 9.19% increase in dry density, and a 16.83% decrease in water absorption compared to the original condition. These improvements were achieved by using the optimal mixture ratio of 6:1:0.05 by weight, which consists of sugarcane bagasse ash, cement, and aluminum powder. The advantages of the proposed method are as follows: This paper presents a novel method called the TOPSIS linear programming model, which is a modified version of the original TOPSIS method, to calculate the closeness efficiency for each run. The proposed method is simpler and more practical, making it useful for solving multi-response optimization problems with large inputs. In addition, this research contributes to the advancement of sustainable materials and offers a practical solution for optimizing lightweight concrete block properties.
RESUMO
In this study, rice straw was pretreated using by cold isostatic pressure to disrupt its microstructure and improve the performance of anaerobic digestion, and the optimal process parameters were optimized using the response surface methodology. The results showed that cold isostatic pressure pretreatment under optimal conditions (pressure of 400 MPa and holding time of 9 min) was effective in disrupting the structure of rice straw and improving its biodegradability. The cumulative methane production of the cold isostatic pressure pretreatment group increased by 76% compared to the untreated group. In addition, microbial community analysis showed that the relative abundance of Firmicutes, Halobacterota, DMER64 and Methanosaeta was higher in groups pretreated with cold isostatic pressure than in untreated groups. This study demonstrated the potential of pretreatment of rice straw with cold isostatic pressure to increase methane production during anaerobic digestion.