Proton Nuclear Magnetic Resonance Spectroscopy Analysis of Mixtures of Chlorhexidine with Different Oxidizing Agents Activated by Photon-Induced Photoacoustic Streaming for Root Canal Irrigation.

Objective: The aim of this in vitro study was to investigate the possible interactions between photon-induced photoacoustic streaming (PIPS™)-activated oxidizing agents and 2% chlorhexidine digluconate. Background data: There is no information about the safety of laser-activated oxidizing agents in combination usage with chlorhexidine gluconate. Materials and methods: Groups were designed as follows G1: 98% para-chloroaniline (PCA); G2: 2% chlorhexidine (CHX); G3: 5.25% sodium hypochlorite (NaOCl) +2% CHX; G4: 5.25% NaOCl (30 sec PIPS activated) +2% CHX; G5: 5.25% NaOCl (60 sec PIPS activated) +2% CHX; G6: 3.5% chlorine dioxide (ClO2) + 2% CHX; G7: 3.5% (ClO2) (30 sec PIPS activated) +2% CHX; G8: 3.5% (ClO2) (60 sec PIPS activated) +2% CHX. The laser-irrigation protocol was performed with an erbium:yttrium-aluminum-garnet laser with a wavelength of 2940 nm equipped with a 140 mm long endodontic fiber tip (PIPS) using 10 mJ at 15 Hz (0.15 W), per pulse operating outputs. Groups were analyzed with proton nuclear magnetic resonance spectroscopy, using PCA as an internal standard. Results: No free PCA was formed in any groups of mixtures or after PIPS activation. Conclusions: Mixing of 3.5% ClO2 and 2% CHX does not form bulky precipitates, unlike the mixture NaOCl + CHX. PIPS activation does not cause changes in reactions of oxidizing agents.

Effect of ultrasonic and Nd: Yag laser activation on irrigants on the push-out bond strength of fiber post to the root canal.

OBJECTIVE: This in vitro study aimed to compare the efficacy of irrigants using various irrigation activation methods to the push-out bond strengths of fiber post to root canal luted with self-adhesive resin cement (SARC). METHODOLOGY: Forty-eight decoronated human canines were used. The specimens were divided into four groups corresponding with the post-space irrigation process and were treated as follows: distilled water (DW) (Control) group received 15 mL of DW; sodium hypochlorite (NaOCl)+ethylenediaminetetraacetic acid (EDTA) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW; passive ultrasonic irrigation (PUI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was agitated with an ultrasonic file; and laser activated irrigation (LAI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was irradiated with Nd: YAG laser. Fiber posts were luted with SARC, and a push-out test was performed. Data was analyzed using one-way analysis of variance and Tukey HSD test. RESULTS: The bond strength values for the groups obtained were as follows: Control (10.04 MPa), NaOCl+EDTA (11.07 MPa), PUI (11.85 MPa), and LAI (11.63 MPa). No statistically significant differences were found among all experimental groups (p>0.05). The coronal (12.66 MPa) and middle (11.63 MPa) root regions indicated a significantly higher bond strength compared with the apical (9.16 MPa) region (p<0.05). CONCLUSIONS: Irrigant activation methods did not increase the bond strength of fiber post to canal.

Effect of ultrasonic and Nd: Yag laser activation on irrigants on the push-out bond strength of fiber post to the root canal

Abstract Objective: This in vitro study aimed to compare the efficacy of irrigants using various irrigation activation methods to the push-out bond strengths of fiber post to root canal luted with self-adhesive resin cement (SARC). Methodology: Forty-eight decoronated human canines were used. The specimens were divided into four groups corresponding with the post-space irrigation process and were treated as follows: distilled water (DW) (Control) group received 15 mL of DW; sodium hypochlorite (NaOCl)+ethylenediaminetetraacetic acid (EDTA) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW; passive ultrasonic irrigation (PUI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was agitated with an ultrasonic file; and laser activated irrigation (LAI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was irradiated with Nd: YAG laser. Fiber posts were luted with SARC, and a push-out test was performed. Data was analyzed using one-way analysis of variance and Tukey HSD test. Results: The bond strength values for the groups obtained were as follows: Control (10.04 MPa), NaOCl+EDTA (11.07 MPa), PUI (11.85 MPa), and LAI (11.63 MPa). No statistically significant differences were found among all experimental groups (p>0.05). The coronal (12.66 MPa) and middle (11.63 MPa) root regions indicated a significantly higher bond strength compared with the apical (9.16 MPa) region (p<0.05). Conclusions: Irrigant activation methods did not increase the bond strength of fiber post to canal.

How to improve root canal filling in teeth subjected to radiation therapy for cancer.

The aim of this study was to evaluate the influence of radiation therapy on root canal sealer push-out bond strength (BS) to dentin and the sealer/dentin interface after different final irrigation solutions (NaOCl, EDTA, and chitosan). Sixty-four maxillary canines were distributed into two groups (n=30): non-irradiated and irradiated with 60 Gy. Canals were prepared with Reciproc-R50 and subdivided (n=10) for final irrigation (NaOCl, EDTA, chitosan) and filled. Three dentin slices were obtained from each root third. The first slice of each third was selected for BS evaluation, and the failure mode was determined by stereomicroscopy. SEM analysis of the sealer-dentin interface was performed in the remaining slices. Two-way ANOVA and Tukey's tests (α=0.05) were used. Lower BS (P<0.0001) was obtained after irradiation (2.07±0.79 MPa), regardless of the final irrigation solution used. The NaOCl group (P<0.001) had the lowest BS in the irradiated (1.68±0.72) and non-irradiated (2.39±0.89) groups, whereas the EDTA (irradiated: 2.14±0.77 and non-irradiated: 3.92±1.54) and chitosan (irradiated: 2.37±0.73 and non-irradiated: 3.51±1.47) groups demonstrated a higher BS (P<0.05). The highest values were observed in the coronal third (3.17±1.38) when compared to the middle (2.74±1.36) and apical ones (2.09±0.97)(P<0.0001). There were more cohesive failures and more gaps in irradiated specimens, regardless of the final solution. The present study showed that radiation was associated with a decrease in BS, regardless of the final solution used, whereas chitosan increased BS in teeth subjected to radiation therapy.

How to improve root canal filling in teeth subjected to radiation therapy for cancer

Abstract The aim of this study was to evaluate the influence of radiation therapy on root canal sealer push-out bond strength (BS) to dentin and the sealer/dentin interface after different final irrigation solutions (NaOCl, EDTA, and chitosan). Sixty-four maxillary canines were distributed into two groups (n=30): non-irradiated and irradiated with 60 Gy. Canals were prepared with Reciproc-R50 and subdivided (n=10) for final irrigation (NaOCl, EDTA, chitosan) and filled. Three dentin slices were obtained from each root third. The first slice of each third was selected for BS evaluation, and the failure mode was determined by stereomicroscopy. SEM analysis of the sealer-dentin interface was performed in the remaining slices. Two-way ANOVA and Tukey's tests (α=0.05) were used. Lower BS (P<0.0001) was obtained after irradiation (2.07±0.79 MPa), regardless of the final irrigation solution used. The NaOCl group (P<0.001) had the lowest BS in the irradiated (1.68±0.72) and non-irradiated (2.39±0.89) groups, whereas the EDTA (irradiated: 2.14±0.77 and non-irradiated: 3.92±1.54) and chitosan (irradiated: 2.37±0.73 and non-irradiated: 3.51±1.47) groups demonstrated a higher BS (P<0.05). The highest values were observed in the coronal third (3.17±1.38) when compared to the middle (2.74±1.36) and apical ones (2.09±0.97)(P<0.0001). There were more cohesive failures and more gaps in irradiated specimens, regardless of the final solution. The present study showed that radiation was associated with a decrease in BS, regardless of the final solution used, whereas chitosan increased BS in teeth subjected to radiation therapy.

Measurement of pressure changes during laser-activated irrigant by an erbium, chromium: yttrium, scandium, gallium, garnet laser.

The use of Er,Cr:YSGG laser to activate irrigants results in the creation of vapour bubbles and shockwaves. The present study evaluated the magnitude of pressure changes in the root canal during laser-activated irrigation. The root canal of a single extracted maxillary canine was enlarged to a size 40/0.06 file. A pressure sensor was inserted apically into the root canal. The tooth was processed as follows. In the EDTA condition, the tooth was irrigated with 17 % EDTA; in the NaOCl condition, the tooth was irrigated with 3 % NaOCl. In all conditions, the irrigants were activated at 0.75 and 1.75 W for 60 s using RFT2 and MZ2 tips; to analyse the effect of tip placement, the tip was activated at the orifice and after inserting the tip 5 mm deeper than the orifice. Data showed no significant difference between irrigation regimens (p > 0.05). There were no significant differences of the pressure between RFT2 and MZ2 tips (p > 0.05). The placement of tips closer to the apex resulted in significantly higher pressure than at the orifice (p < 0.001). The use of 1.75 W power resulted in a significantly higher increase of pressure compared to 0.75 W (p < 0.001), regardless either the type of solutions or tips used. The magnitude of the pressure changes in the root canal at 0.75 W was significantly lower than 1.75 W regardless of either type of tips or solutions used. The closer the insertion of the tip to the apex, the higher the pressure.

Activation of ethylenediaminetetraacetic acid by a 940 nm diode laser for enhanced removal of smear layer.

Laser enhancement of ethylenediaminetetraacetic acid with cetrimide (EDTAC) has previously been shown to increase removal of smear layer, for middle-infrared erbium lasers. This study evaluated the efficiency of EDTAC activation using a near-infrared-pulsed 940 nm laser delivered by plain fibre tips into 15% EDTAC or 3% hydrogen peroxide. Root canals in 4 groups of 10 single roots were prepared using rotary files, with controls for the presence and absence of smear layer. After laser treatment (80 mJ pulse(-1) , 50 Hz, 6 cycles of 10 s), roots were split and the apical, middle and coronal thirds of the canal were examined using scanning electron microscopy, with the area of dentine tubules determined by a validated quantitative image analysis method. Lasing EDTAC considerably improved smear layer removal, while lasing into peroxide gave minimal smear layer removal. The laser protocol used was more effective for smear layer removal than the 'gold standard' protocol using EDTAC with sodium hypochlorite (NaOCl). In addition, lasers may also provide a benefit through photothermal disinfection. Further research is needed to optimise irrigant activation protocols using near-infrared diode lasers of other wavelengths.

Visualization of removal of trapped air from the apical region of the straight root canal models generating 2-phase intermittent counter flow during ultrasonically activated irrigation.

INTRODUCTION: The purpose of this in vitro study was to obtain a better understanding of the mechanism of irrigant traveling apically and generating 2-phase intermittent counter flow in straight root canal models during activation of the irrigant by ultrasonic means in an endodontic procedure. METHODS: A high-speed imaging system, with high temporal and spatial resolution (FastCam SA5; Photron, Tokyo, Japan) at a frame rate of 100,000 frames per second using a macro lens (60 mm, f/2.8; Nikon, Tokyo, Japan), was used to visualize, in glass models of root canals, an ultrasonically induced acoustic pressure wave in an EDTA solution environment. A 25-mm stainless steel noncutting file #20 driven by an ultrasonic device (P5 Newtron; Satelec Acteon, Mérignac, France) at power settings of 5 and 7 produced disturbances at the solution-air interface. RESULTS: We found that apically directed travel of the irrigant was caused by disruption of the surface tension at the solution-air interface. This disruption caused by ultrasonic activation energy displaced air in the form of bubbles from the apical region toward the solution. CONCLUSIONS: The apical movement of the solution may be attributed to ultrasonically induced wave generation at the solution-air interface, resulting in the removal of trapped air from the root canal and allowing the solution to travel apically in the opposite directions (via a 2-phase intermittent counter flow).

Effect of laser-activated irrigation of 1320-nanometer Nd:YAG laser on sealer penetration in curved root canals.

INTRODUCTION: The purpose of this study was to investigate the efficacy of laser-activated irrigation (LAI) of 1320-nm neodymium-doped:yttrium-aluminum-garnet (Nd:YAG) laser on sealer penetration into dentinal tubules in the presence of 5.25% sodium hypochlorite (NaOCl) or 17% ethylenediaminetetraacetic acid (EDTA). METHODS: The curved root canals (>20°) from 63 extracted human molars (negative control, n = 3) were prepared to size #30.06 with NaOCl irrigation. Teeth were divided into 4 groups (n = 15) as follows: group N, NaOCl irrigation without LAI; group E, EDTA irrigation without LAI; group NL, LAI with NaOCl; group EL, LAI with EDTA. In all groups, the laser fiber was inserted and withdrawn 4 times for 5 seconds each. Teeth were obturated with gutta-percha and fluorescent-labeled sealer. Transverse sections at 2 and 5 mm from root apex were examined with confocal laser scanning microscopy, and the percentage of sealer penetration into dentinal tubules was measured. RESULTS: Groups E, NL, and EL showed higher percentage of sealer penetration than group N (P < .05). With NaOCl as irrigant, LAI (group NL) resulted in significantly higher amount of sealer penetration than nonactivated group (group N) in both levels (P < .05). However, with EDTA, no significant differences in sealer penetration were observed between the laser-activated group (group EL) and its nonactivated counterpart (group E) in both levels (P > .05). CONCLUSIONS: The 1320-nm Nd:YAG laser activation with either NaOCl or EDTA was much better than NaOCl irrigation alone and as effective as EDTA final flush for sealer penetration into dentinal tubules. Additional use of laser with EDTA did not improve the quality of obturation in the curved canals.

Disinfection of root canals with photon-initiated photoacoustic streaming.

INTRODUCTION: This study set out to compare the efficacy of laser-activated and ultrasonically activated root canal disinfection with conventional irrigation, specifically its ability to remove bacterial film formed on root canal walls. METHODS: Seventy human premolars were shaped to an apical size #20, taper .07, sterilized, and contaminated in situ with oral bacteria for 1 week and incubated for 2 more weeks. Irrigation was done with 6% NaOCl (group 1), NaOCl ultrasonically activated with blunt inserts (group 2), or a pulsed erbium:YAG laser at nonablative settings (group 3) for a total of 60 seconds each. Positive and negative controls were also included. Aerobic bacterial sampling was performed, and the incidence of positive samples after 24 and 48 hours as well as bacterial counts (colony-forming units) were determined. Fixed and demineralized sections 1 mm and 4 mm off the apex were Brown-Brenn stained and assessed for remaining intracanal bacteria/biofilm and dentinal tubule penetration. RESULTS: All 3 canal disinfection protocols significantly reduced bacterial counts (P < .001). None of the 3 techniques predictably generated negative samples, but laser-activated disinfection was superior to the other 2 techniques in this aspect (P < .05). Histologic sections showed variable remaining bacterial presence in dentinal tubules at the 4-mm level and significantly less bacterial biofilm/necrotic tissue remaining at the 1-mm level after laser-activated irrigation (P < .05). CONCLUSIONS: Under the conditions of this combined in situ/in vitro study, activated disinfection did not completely remove bacteria from the apical root canal third and infected dentinal tubules. However, the fact that laser activation generated more negative bacterial samples and left less apical bacteria/biofilm than ultrasonic activation warrants further investigation.

Reaction rate of NaOCl in contact with bovine dentine: effect of activation, exposure time, concentration and pH.

AIM: To determine the influence of activation method (ultrasound or laser), concentration, pH and exposure time on the reaction rate (RR) of NaOCl when in contact with dentinal walls. METHODOLOGY: The walls from standardized root canals in bovine incisors were exposed to a standardized volume of sodium hypochlorite (NaOCl) with different concentrations (2% and 10%), pH (5 and 12) and exposure times (1 and 4min). Two irrigation protocols were tested: passive ultrasonic irrigation or laser activated irrigation with no activation as the control. The activation interval lasted 1min followed by a rest interval of 3 min with no activation. The RR was determined by measuring the iodine concentration using an iodine/thiosulfate titration method. RESULTS: Exposure time, concentration and activation method influenced the reaction rate of NaOCl whereas pH did not. CONCLUSIONS: Activation is a strong modulator of the reaction rate of NaOCl. During the rest interval of 3min, the consumption of available chlorine increased significantly. This effect seems to be more pronounced after irrigant activation by laser. pH did not affect the reaction rate of 2% NaOCl.

Cavitational effects in aqueous endodontic irrigants generated by near-infrared lasers.

INTRODUCTION: Laser-generated pressure waves may have application for removing debris and smear layers from root canals. Past work has employed middle infrared erbium lasers. The present study examined whether near infrared 940 and 980 nm diode lasers (Biolase Ezlase and Sirona Sirolaser, respectively) could induce cavitations in aqueous media. METHODS: Laser energy was delivered into a capillary tube using a 200 microm fiber, and the formation of cavitations observed with a microscope. In the first part of the study, a range of laser parameters were trialled to establish conditions which form cavitations within 5 seconds of the commencement of laser irradiation. The second part of the study compared cavitation in distilled water, aerated tap water, degassed distilled water, ozonated water, 3 and 6% hydrogen peroxide using panel setting of 2.5 W/25 Hz for the Sirolaser, and 4 W/10 Hz for the Ezlase. RESULTS: Both diode laser systems could induce cavitation in water-base media by the formation and implosion of water vapour. Laser power played a more important role than pulse frequency or pulse interval. Optimal laser-initiated cavitation occurred when weak (3%) peroxide solutions were used as the target irrigant, rather than water. CONCLUSION: This phenomenon has potential for enhancing debridement in endodontics.

Laser activation of endodontic irrigants with improved conical laser fiber tips for removing smear layer in the apical third of the root canal.

With a tube etching process, conical-ended optical fibers for middle infrared lasers that have lateral emissions can be produced, a feature of benefit for delivering laser energy onto the root canal walls. This study examined the ability of these improved laser tips when Er:YAG and Er,Cr:YSGG lasers were used in root canals in which thick smear layers had been created intentionally to provide a challenge for the laser system. Smear layer was assessed from scanning electron microscopy images with an objective digital method. Lasing improved the action of ethylene diamine tetraacetic acid with cetavlon (EDTAC) in removing smear layer. Conical fibers performed better than plain fibers, but there was no difference in performance between the 2 laser systems when matched for all other parameters. These results provide a "proof of concept" for lateral emitting fibers for endodontic procedures and illustrate the novel contribution of lasing to the action of EDTAC in dissolving smear layer.

Current clinical applications of photo-activated disinfection in restorative dentistry.

UNLABELLED: The traditional treatment of dental caries has been limited to bulk removal of the diseased tissue. Recently, disinfection rather than the removal of all the carious tissue has been advocated with the aim of more effective and conservative treatment. In endodontics, prognosis is dependent on the complete disinfection of the root canal system. Evidence exists that Photo-Activated Disinfection is more effective than traditional chemo-mechanical canal preparation. Photo-Activated Disinfection may also have a place in the treatment of other infective oral conditions, including periodontal disease. CLINICAL RELEVANCE: Removal or disruption of micro-organisms and their ecosystem is important in many branches of restorative dentistry. A novel disinfection system is now available which has the potential to improve treatment methods and prognoses.

Comparison of temporal changes in components of formalin guaiacol under several storage conditions.

This study examined the effects of storage conditions such as time course, temperature, fluorescent light, and darkness on the components and antibacterial activity of formalin guaiacol (FG) used in endodontic treatment. We measured the quantities of formaldehyde and guaiacol in FG and antibacterial activities against Staphylococcus aureus, Porphyromonas gingivalis, and Porphyromonas endodontalis. The components and antibacterial activity of FG in the brown or transparent tightly sealed containers were not affected by temperature or fluorescent light throughout the 4 week test. However, in the loosely sealed containers, formaldehyde and guaiacol in FG sample decreased remarkably within one week, not only in a temperature- and time-dependent manner, but also under fluorescent light at 20 degrees C. Furthermore, the antibacterial activities in the FG sample were significantly attenuated in parallel with the decrease in formaldehyde levels. Fluorescent light caused color changes and crystallization of FG samples in the transparent containers. These results suggest that it is important to replace fresh FG every 5 to 7 days for endodontic treatment and that, in the dental office, it is advisable to store fresh FG in tightly sealed containers every 2 weeks to maintain its efficacy.