Effects of detoxification process on toxicity and foreign protein of tetanus toxoid and diphtheria toxoid.

Formaldehyde detoxification is a process for converting tetanus toxin (TT) and diphtheria toxin (DT) into tetanus toxoid (TTd) and diphtheria toxoid (DTd), respectively. The mechanism of this detoxification process has been investigated by several previous studies based on lab-scale toxoids. To obtain greater insights of the effects induced by formaldehyde, industrial TTd and DTd batches obtained from different detoxification processes were studied in this work. Using liquid chromatography-mass spectrometry (LC-MS), 15 and 20 repeatable formaldehyde-induced modification sites of TTd and DTd were identified, respectively. Toxoid which had a higher formaldehyde-induced modification rate observed by LC-MS, also had larger bands on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Aggregates which were observed on size exclusion chromatogram (SEC) were confirmed by SDS-PAGE and LC-MS. Formaldehyde detoxification also led to a decrease of isoelectric point (pI) values and an increase of retention on weak anion exchange (WAX) column. Specific toxicity tests were conducted to evaluate toxicity of the TTd and DTd samples obtained with different detoxification conditions. Results from the specific toxicity tests showed that all toxoids used in this study were qualified, including toxoids obtained from mild and drastic detoxification conditions. However, obtained from mild detoxification conditions had less aggregates and may lead to a higher degree of glycosylation in conjugate vaccines than the ones obtained from drastic detoxification conditions. Thus, we suggest that mild detoxification conditions should be used to obtain TTd and DTd. Furthermore, as well as studying the formaldehyde-induced modifications and toxicity in TTd and DTd, the effects of the detoxification process on foreign proteins were also investigated. An increase in foreign proteins were observed in the aggregate than in the monomer of the toxoids. Additionally, some foreign proteins in the monomer of the toxins transferred to the aggregate of toxoids due to the formation of cross-linking. To eliminate the risk of cross-linking foreign proteins to toxoids in vaccination programs, a purification process is necessary before the detoxification process and/or the use of toxoids in vaccines.

Identification of Formaldehyde-Induced Modifications in Diphtheria Toxin.

Diphtheria toxoid is produced by detoxification of diphtheria toxin with formaldehyde. This study was performed to elucidate the chemical nature and location of formaldehyde-induced modifications in diphtheria toxoid. Diphtheria toxin was chemically modified using 4 different reactions with the following reagents: (1) formaldehyde and NaCNBH3, (2) formaldehyde, (3) formaldehyde and NaCNBH3 followed by formaldehyde and glycine, and (4) formaldehyde and glycine. The modifications were studied by SDS-PAGE, primary amino group determination, and liquid chromatography-electrospray mass spectrometry of chymotryptic digests. Reaction 1 resulted in quantitative dimethylation of all lysine residues. Reaction 2 caused intramolecular cross-links, including the NAD+-binding cavity and the receptor-binding site. Moreover, A fragments and B fragments were cross-linked by formaldehyde on part of the diphtheria toxoid molecules. Reaction 3 resulted in formaldehyde-glycine attachments, including in shielded areas of the protein. The detoxification reaction typically used for vaccine preparation (reaction 4) resulted in a combination of intramolecular cross-links and formaldehyde-glycine attachments. Both the NAD+-binding cavity and the receptor-binding site of diphtheria toxin were chemically modified. Although CD4+ T-cell epitopes were affected to some extent, one universal CD4+ T-cell epitope remained almost completely unaltered by the treatment with formaldehyde and glycine.

Reduced nonspecific protein adsorption by application of diethyldithiocarbamate in receptor layer of diphtheria toxoid electrochemical immunosensor.

The immunoassay technology is of particular importance for both the environmental industry and clinical analysis. Biosensors, with the sensing layer based on antibodies or their fragments, offer high selectivity and short detection times. However, analytical devices where the electrochemical signal corresponds to changes in the interfacial region (sensing layer/electrode surface) are very susceptible to any nonspecific adsorption. Unfortunately, proteins (including antibodies) belong to the molecules showing high non-specific interactions with solid substrates. Herein, we propose diethyldithiocarbamate as a new antifouling and highly conductive agent. The investigations were conducted to evaluate its interaction with chosen proteins and the mechanism of its co-adsorption with biotinylated thiol (an anchor point for immune-sensing elements). The developed receptor layer is characterised by reduced nonspecific protein adsorption and high conductivity with the same preserved specificity of the antibodies (immobilised by the streptavidin/biotin bioaffinity technique). This allowed for selective detection of the diphtheria toxoid, an inactive toxin secreted by virulent strains of Corynebacterium diphtheria, at the level of 5 â‹… 10-6 µg⋅ml-1 (1 â‹… 10-6 Lf⋅ml-1) and in the real-life sample.

Comparison of Immune Responses to Two Quadrivalent Meningococcal Conjugate Vaccines (CRM197 and Diphtheria Toxoid) in Healthy Adults.

BACKGROUND: After the introduction of the meningococcal ACWY-CRM197 conjugate vaccine (MenACWY-CRM) in 2012 and the meningococcal ACWY-diphtheria toxoid conjugate vaccine (MenACWY-DT) in 2014, immunization was recommended for certain high-risk groups including new military recruits in Korea. However, comparative immunogenicity studies for these vaccines have not been performed in Korea. Here, we compared the immunogenicity of these two vaccines in healthy adults. METHODS: A total of 64 adults, 20-49 years of age, were randomly divided into two groups (1:1) to receive either of the two vaccines. The sera were obtained before and 1 month after vaccination and tested for serogroup-specific serum bactericidal activity using baby rabbit complement. RESULTS: There were no significant differences post-vaccination in the geometric mean indices and the seropositive rate to all serogroups between the vaccines. The proportion of seropositive subjects after vaccination ranged from 88% to 100%. CONCLUSION: Both meningococcal conjugate vaccines showed good immunogenicity in healthy Korean adults without statistically significant differences. Further investigations for serotype distribution of circulating meningococci and the immune interference between other diphtheria toxin-containing vaccines concomitantly used for military recruits are needed to optimize immunization policies. TRIAL REGISTRATION: Clinical Research Information Service Identifier: KCT0002460.

Stabilised aluminium phosphate nanoparticles used as vaccine adjuvant.

Aluminium phosphate is a commonly used adjuvant consisting of heterogeneously sized aggregates up to several micrometers. However, aluminium phosphate nanoparticles may exhibit an improved adjuvant effect. In this study, nanoparticles were made by sonication of commercially available aluminium phosphate adjuvant, resulting in particles with a size (Z-average diameter) between 200-300 nm and a point of zero charge of 4.5. To prevent reaggregation, which occurred within 14 days, a screening of excipients was performed to identify stabilisers effective under physiological conditions (pH 7.4, 290 mOsm). The amino acids threonine, asparagine, and L-alanyl-L-1-aminoethylphosphonic acid (LAPA) stabilised sonicated aluminium phosphate. Particle sizes remained stable between 400-600 nm at 37 °C during 106 days. Contrarily, arginine induced strong reaggregation to a particle size larger than 1000 nm. The stability of aluminium phosphate nanoparticles was strongly affected by the pH. Aggregation mainly occurred below pH 7. The adsorption capacity, a potentially relevant parameter for adjuvants, was slightly reduced in the presence of asparagine, when using a model antigen (lysozyme). LAPA, arginine, threonine and aspartic acid reduced protein adsorption significantly. The adjuvant effect of aluminium phosphate nanoparticles was studied by immunisation of mice with diphtheria toxoid adjuvanted with the aluminium phosphate nanoparticles. The presence of LAPA, threonine, aspartic acid or asparagine did not alter diphtheria toxoid-specific antibody or toxin-neutralising antibody titres. Arginine increased diphtheria toxoid-specific antibody titres but not toxin-neutralising antibody titres. In conclusion, aluminium phosphate nanoparticles were stabilised by particular amino acids and induced an adjuvant effect comparable to that of aluminium phosphate microparticles.

Coated and Hollow Microneedle-Mediated Intradermal Immunization in Mice with Diphtheria Toxoid Loaded Mesoporous Silica Nanoparticles.

PURPOSE: To examine the immunogenicity of diphtheria toxoid (DT) loaded mesoporous silica nanoparticles (MSNs) after coated and hollow microneedle-mediated intradermal immunization in mice. METHODS: DT was loaded into MSNs and the nanoparticle surface was coated with a lipid bilayer (LB-MSN-DT). To prepare coated microneedles, alternating layers of negatively charged LB-MSN-DT and positively charged N-trimethyl chitosan (TMC) were coated onto pH-sensitive microneedle arrays via a layer-by-layer approach. Microneedle arrays coated with 5 or 3 layers of LB-MSN-DT were used to immunize mice and the elicited antibody responses were compared with those induced by hollow microneedle-injected liquid formulation of LB-MSN-DT. Liquid DT formulation with and without TMC (DT/TMC) injected by a hollow microneedle were used as controls. RESULTS: LB-MSN-DT had an average size of about 670 nm and a zeta potential of -35 mV. The encapsulation efficiency of DT in the nanoparticles was 77%. The amount of nano-encapsulated DT coated onto the microneedle array increased linearly with increasing number of the coating layers. Nano-encapsulated DT induced stronger immune responses than DT solution when delivered intradermally via hollow microneedles, but not when delivered via coated microneedles. CONCLUSION: Both the nano-encapsulation of DT and the type of microneedles affect the immunogenicity of the antigen.

Development of nanoparticle adjuvants to potentiate the immune response against diphtheria toxoid.

BACKGROUND: Over the years, diphtheria was known as contagious fatal infection caused by Corynebacterium diphtheria that affects upper respiratory system. The spread of diphtheria epidemic disease is best prevented by vaccination with diphtheria toxoid vaccine. Aluminum adjuvants were reported to stimulate the immune responses to killed and subunit vaccines. OBJECTIVE: Our study aimed to minimize adjuvant particles size, to gain insight of resulting immunity titer and impact on immune response antibody subtypes. METHODS: Aluminum salts and calcium phosphate adjuvants were prepared, followed by micro/nanoparticle adjuvants preparation. After formulation of diphtheria vaccine from diphtheria toxoid and developed adjuvants, we evaluated efficacy of these prepared vaccines based on their impact on immune response via measuring antibodies titer, antibodies isotyping and cytokines profile in immunized mice. RESULTS: A noteworthy increase in immunological parameters was observed; antibodies titer was higher in serum of mice injected with nanoparticle adjuvants-containing vaccine than mice injected with standard adjuvant-containing vaccine and commercial vaccine. Aluminum compounds adjuvants (nanoparticles and microparticles formulation) and microparticles calcium phosphate adjuvant induce TH2 response, while nanoparticles calcium phosphate and microparticles aluminum compounds adjuvants stimulate TH1 response. CONCLUSIONS: Different treatments to our adjuvant preparations (nanoparticles and microparticles formulation) had a considerable impact on vaccine immunogenicity.

Diphtheria toxoid and N-trimethyl chitosan layer-by-layer coated pH-sensitive microneedles induce potent immune responses upon dermal vaccination in mice.

Dermal immunization using antigen-coated microneedle arrays is a promising vaccination strategy. However, reduction of microneedle sharpness and the available surface area for antigen coating is a limiting factor. To overcome these obstacles, a layer-by-layer coating approach can be applied onto pH-sensitive microneedles. Following this approach, pH-sensitive microneedle arrays (positively charged at coating pH5.8 and nearly uncharged at pH7.4) were alternatingly coated with negatively charged diphtheria toxoid (DT) and N-trimethyl chitosan (TMC), a cationic adjuvant. First, the optimal DT dose for intradermal immunization was determined in a dose-response study, which revealed that low-dose intradermal immunization was more efficient than subcutaneous immunization and that the EC50 dose of DT upon intradermal immunization is 3-fold lower, as compared to subcutaneous immunization. In a subsequent immunization study, microneedle arrays coated with an increasing number (2, 5, and 10) of DT/TMC bilayers resulted in step-wise increasing DT-specific immune responses. Dermal immunization with microneedle arrays coated with 10 bilayers of DT/TMC (corresponding with ±0.6µg DT delivered intradermally) resulted in similar DT-specific immune responses as subcutaneous immunization with 5µg of DT adjuvanted with aluminum phosphate (8-fold dose reduction). Summarizing, the layer-by-layer coating approach onto pH-sensitive microneedles is a versatile method to precisely control the amount of coated and dermally-delivered antigen that is highly suitable for dermal immunization.

Antigenic fingerprinting of diphtheria toxoid adsorbed to aluminium phosphate.

The antigenicity of alum-adsorbed diphtheria toxoid (DTd) was determined in combination vaccines, containing DTd, tetanus toxoid and inactivated poliovirus. A panel of monoclonal antibodies was used, covering five epitopes, distributed over the antigen. The resulting antigenic fingerprint of DTd demonstrates consistency of adsorption at antigen level in final product combination vaccines. The antigenic quality of DTd alone, adsorbed to aluminium phosphate, was also determined and compared with pre-adsorbed toxoid (starting material as well as toxoid desorbed from aluminium phosphate). Some epitopes became less accessible after adsorption, while others became relatively better exposed. Some epitopes disappeared almost completely upon adsorption, but were re-established after desorption of the antigen. The results indicate that DTd is adsorbed to aluminium phosphate in a preferred orientation and not randomly.

Influencing Antibody-Mediated Attenuation of Methamphetamine CNS Distribution through Vaccine Linker Design.

Active vaccination examining a single hapten engendered with a series of peptidic linkers has resulted in the production of antimethamphetamine antibodies. Given the limited chemical complexity of methamphetamine, the structure of the linker species embedded within the hapten could have a substantial effect on the ultimate efficacy of the resulting vaccines. Herein, we investigate linker effects by generating a series of methamphetamine haptens that harbor a linker with varying amino acid identity, peptide length, and associated carrier protein. Independent changes in each of these parameters were found to result in alterations in both the quantity and quality of the antibodies induced by vaccination. Although it was found that the consequence of the linker design was also dependent on the identity of the carrier protein, we demonstrate overall that the inclusion of a short, structurally simple, amino acid linker benefits the efficacy of a methamphetamine vaccine in limiting brain penetration of the free drug.

Immunogenicity and efficacy of a rationally designed vaccine against vascular endothelial growth factor in mouse solid tumor models.

Vascular endothelial growth factor (VEGF) plays an important role in the progression of various cancers. The VEGF-specific antibody bevacizumab combined with chemotherapy was shown to significantly improve progression-free survival in certain cancers. However, repeated administration is necessary for effective suppression of VEGF, thereby making the therapy expensive and cumbersome. Thus, it is urgent to develop alternative reagents such as VEGF vaccines. Here we report that DTT-VEGF, a VEGF-based antigen consisting of the receptor-binding domain of VEGF and diphtheria toxin T domain (DTT), not only stimulated neutralizing antibody response, but also induced type 1 immune response as well as anti-tumor cytotoxic T lymphocytes in mice when administered with aluminum hydroxide adjuvant. The antibodies triggered by DTT-VEGF immunization inhibited the binding of VEGF to VEGF receptor and downregulated the serum VEGF levels in tumor-bearing mice. VEGF-specific IgG2a and IgG2b antibodies as well as type 1 cytokines were stimulated by DTT-VEGF vaccination. The splenocytes from DTT-VEGF-immunized mice showed cytotoxic activity against B16-F10 cells expressing VEGF. Extensive necrosis with severe hemorrhage and enhanced CD8+ T cell infiltration were observed in tumors from DTT-VEGF-immunized mice. The percentages of CD31+ vascular areas in the tumor sections from DTT-VEGF-immunized mice were significantly lower than those of control mice. DTT-VEGF significantly inhibited tumor growth in preventive and therapeutic vaccination settings in mouse models. Our data suggest that DTT is an effective antigen carrier to break immune self-tolerance and our vaccine design has potential to be used for human cancer therapy.

Collaborative study for the calibration of a replacement International Standard for diphtheria toxoid for use in flocculation test.

We present the results of a collaborative study for the establishment of a replacement International Standard (IS) for diphtheria toxoid for use in flocculation test and its calibration in Lf units. Calibration was performed using Ramon flocculation method, standardized using the 2nd IS. The candidate standard was assigned a unitage of 1870 Lf/ampoule based on results from 25 laboratories in 15 different countries and was established as the 3rd IS for diphtheria toxoid for use in flocculation test by the WHO Expert Committee on Biological Standardization (ECBS) in October 2015. The study also assessed the use of alternative methods for measuring Lf. Participants were asked to determine the Lf value of the candidate standard using an Enzyme Linked Immunosorbent Assay (ELISA) established at NIBSC, or other suitable in-house method. 10 laboratories performed ELISA according to the NIBSC protocol, 1 laboratory performed flocculation using laser-light scattering according to an in-house protocol, and 1 laboratory performed another in-house ELISA. Results suggest these methods may provide suitable alternatives to the Ramon flocculation test, subject to validation, and that the new standard could act as a suitable reference preparation in these methods.

Immunogenicity of MenACWY-CRM in Korean Military Recruits: Influence of Tetanus-Diphtheria Toxoid Vaccination on the Vaccine Response to MenACWY-CRM.

The quadrivalent meningococcal conjugate vaccine (MenACWY-CRM) has been introduced for military recruits in Korea since 2012. This study was performed to evaluate the immunogenicity of MenACWY-CRM in Korean military recruits. In addition, the influence of tetanus-diphtheria toxoids (Td) vaccination on the vaccine response to MenACWY-CRM was analyzed. A total of 75 military recruits were enrolled. Among them, 18 received a dose of MenACWY-CRM only (group 1), and 57 received Td three days before MenACWY-CRM immunization (group 2). The immunogenicity of MenACWY-CRM was compared between the two groups. The serum bactericidal activity with baby rabbit complement was measured before and three weeks after immunization against serogroups A, C, W-135, and Y. The geometric mean titers (GMTs) against four serogroups were significantly increased in both groups after immunization. Compared to group 2, group 1 exhibited significantly higher vaccine responses in several aspects: post-immune GMTs against serogroup A and C, seroresponse rates against serogroup A, and a fold increases of titers against serogroup A, C, and Y. MenACWY-CRM was immunogenic against all vaccine-serogroups in Korean military recruits. Vaccine response to MenACWY-CRM was influenced by Td administered three days earlier.

Development of chitosan-pullulan composite nanoparticles for nasal delivery of vaccines: in vivo studies.

Here, we aimed at developing chitosan/pullulan composite nanoparticles and testing their potential as novel systems for the nasal delivery of diphtheria toxoid (DT). All the chitosan derivatives [N-trimethyl (TMC), chloride and glutamate] and carboxymethyl pullulan (CMP) were synthesised and antigen-loaded composites were prepared by polyion complexation of chitosan and pullulan derivatives (particle size: 239-405 nm; surface charge: +18 and +27 mV). Their immunological effects after intranasal administration to mice were compared to intramuscular route. Composite nanoparticles induced higher levels of IgG responses than particles formed with chitosan derivative and antigen. Nasally administered TMC-pullulan composites showed higher DT serum IgG titre when compared with the other composites. Co-encapsulation of CpG ODN within TMC-CMP-DT nanoparticles resulted in a balanced Th1/Th2 response. TMC/pullulan composite nanoparticles also induced highest cytokine levels compared to those of chitosan salts. These findings demonstrated that TMC-CMP-DT composite nanoparticles are promising delivery system for nasal vaccination.

Fabrication of chitosan microspheres using vanillin/TPP dual crosslinkers for protein antigens encapsulation.

Microspheres were prepared from water soluble chitosan using dual vanillin/TPP crosslinkers. Placebo (C1), Bovine serum albumin (BSA) (C2), monovalent tetanus toxoid (TT) (C3) and divalent tetanus (TT) and diphtheria toxoids (DT) (C4) encapsulated microspheres were studied in terms of size (1-4 µm), encapsulation efficiency (75-80%), swelling and mucoadhesion (56-68%). FT-IR, TGA, XRD and SEM characterization of microspheres suggested specific interaction, more thermal stability, amorphous nature and rough surfaces of encapsulated microspheres. EDS confirmed the co-crosslinking and ninhydrin tests were showing higher crosslinking density. Zeta potential was 47.7 to 66.2 +mV indicating the potential stability of the colloidal system. Equilibrium adsorption isotherms described encapsulated microspheres followed the Langmuir isotherm model, suggesting monolayer adsorption of the mucin on microspheres. In-vitro release studies up to four weeks indicated zero order kinetics and obeyed swelling-controlled super case II transport release mechanism. Thus, the present study could be helpful in developing the multivalent oral vaccine.

Determining trace amounts and the origin of formaldehyde impurity in Neisseria meningitidis A/C/Y/W-135-DT conjugate vaccine formulated in isotonic aqueous 1× PBS by improved C18-UPLC method.

The ability to accurately measure and report trace amounts of residual formaldehyde impurity in a vaccine product is not only critical in the product release but also a regulatory requirement. In many bacterial or viral vaccine manufacturing procedures, formaldehyde is used either at a live culture inactivation step or at a protein de-toxification step or at both. Reported here is a validated and improved C18-UPLC method (developed based on previously published C-8 HPLC method) to determine the traces of formaldehyde process impurity in a liquid form Neisseria meningitidis A/C/Y/W-135-DT conjugate vaccine formulated in isotonic aqueous 1× PBS. UPLC C-18 column and the conditions described distinctly resolved the 2,4-DNPH-HCHO adduct from the un-reacted 2,4-DNPH as detected by TUV detector at 360 nm. This method was shown to be compatible with PBS formulation and extremely sensitive (with a quantitation limit of 0.05 ppm) and aided to determine formaldehyde contamination sources by evaluating the in-process materials as a track-down analysis. Final nanogram levels of formaldehyde in the formulated single dose vialed vaccine mainly originated from the diphtheria toxoid carrier protein used in the production of the conjugate vaccine, whereas relative contribution from polysaccharide API was minimal.

Carrier priming with CRM 197 or diphtheria toxoid has a different impact on the immunogenicity of the respective glycoconjugates: biophysical and immunochemical interpretation.

Glycoconjugate vaccines play an enormous role in preventing infectious diseases. The main carrier proteins used in commercial conjugate vaccines are the non-toxic mutant of diphtheria toxin (CRM197), diphtheria toxoid (DT) and tetanus toxoid (TT). Modern childhood routine vaccination schedules include the administration of several vaccines simultaneously or in close sequence, increasing the concern that the repeated exposure to conjugates based on these carrier proteins might interfere with the anti-polysaccharide response. Extending previous observations we show here that priming mice with CRM197 or DT does not suppress the response to the carbohydrate moiety of CRM197 meningococcal serogroup A (MenA) conjugates, while priming with DT can suppress the response to DT-MenA conjugates. To explain these findings we made use of biophysical and immunochemical techniques applied mainly to MenA conjugates. Differential scanning calorimetry and circular dichroism data revealed that the CRM197 structure was altered by the chemical conjugation, while DT and the formaldehyde-treated form of CRM197 were less impacted, depending on the degree of glycosylation. Investigating the binding and avidity properties of IgGs induced in mice by non-conjugated carriers, we found that CRM197 induced low levels of anti-carrier antibodies, with decreased avidity for its MenA conjugates and poor binding to DT and respective MenA conjugates. In contrast, DT induced high antibody titers able to bind with comparable avidity both the protein and its conjugates but showing very low avidity for CRM197 and related conjugates. The low intrinsic immunogenicity of CRM197 as compared to DT, the structural modifications induced by glycoconjugation and detoxification processes, resulting in conformational changes in CRM197 and DT epitopes with consequent alteration of the antibody recognition and avidity, might explain the different behavior of CRM197 and DT in a carrier priming context.

Effects of early vaccination with a gonadotropin releasing factor analog-diphtheria toxoid conjugate on boar taint and growth performance of male pigs.

The aim of this study was to evaluate safety (in terms of detecting possible adverse clinical effects attributable to vaccination), efficacy, and effects on growth performance of a gonadotropin releasing factor analog-diphtheria toxoid conjugate (commercially distributed as Improvac; Zoetis, Zaventem, Belgium) in male pigs raised in a commercial Greek farm. A total of 1,230 male pigs was enrolled in 16 weekly batches and allocated to 3 groups: barrows (castrated on the next day after birth [study Day 0]), pigs vaccinated with the above-mentioned product, and intact boars. Vaccinated pigs were injected subcutaneously with 2 mL of the anti-gonadotropin releasing factor (GnRF) vaccine at 9 to 11 wk of age (60-78 d) and 15 to 17 wk of age (102-120 d) and slaughtered at 22 to 25 wk of age (152-176 d). No clinical abnormalities or adverse events attributable to vaccination occurred. Mean BW of vaccinated pigs was 6% greater compared with barrows at slaughter (P < 0.0001). The vaccinated pigs had greater ADG than barrows from castration to slaughter (8%). In detail, a lower ADG from first to second vaccination (-12%; P < 0.0001) and a 27% greater ADG from second vaccination to slaughter (P < 0.0001) were observed. The ADG of vaccinated pigs and intact boars was not significantly different throughout the study, except from first to second vaccination (boars greater; P = 0.0059) and second vaccination to slaughter (vaccinates greater; P = 0.0390). Feed conversion ratio of barrows was 11 and 8% greater compared with vaccinated pigs (P = 0.0005) and boars (P = 0.0062) from first to second vaccination but was 23 to 26% lower compared with vaccinated pigs (P < 0.0001) and intact boars (P < 0.0001) from first vaccination to slaughter and 7 to 9.5% lower from the second vaccination to slaughter (P = 0.0029 and P = 0.0003 for vaccinates and intact boars, respectively). At slaughter, the belly fat androstenone concentration of all vaccinated pigs and 64% of intact boars was below 200 ng/g. Belly fat skatole concentration was below 20 ng/g in samples from all groups. In conclusion, vaccination against GnRF using the GnRF analog-diphtheria toxoid conjugate tested did not induce adverse clinical effects, proved effective, and compared with physical castration, resulted in greater BW at slaughter and improved ADG and feed conversion ratio from first vaccination to slaughter.