Variable-Angle Surface Spectroscopy Reveals the Water Structure in the Stern Layer at Charged Aqueous Interfaces.

At charged aqueous interfaces, the second-order nonlinear optical response originates from water molecules within the diffuse part of the electrical double layer, which are ordered by the surface field and from water that additionally experiences chemical and physical interactions with the surface in the Stern layer. These two environments can either reinforce or diminish the overall signal and can be disentangled by varying the coherence length of their interaction with external laser fields. Here, we demonstrate a method in which the angle of incidence is varied to afford a significant change in the coherence length. When this technique was applied to the silica-water interface, it was observed that water molecules in the Stern and diffuse layers direct their hydrogen atoms toward the mineral surface at a low ionic strength and neutral pH. A decrease in the signal with increasing ionic strength is attributed to hydrated cation adsorption that competes with free water for deprotonated silanol sites.

A facile method for separating fine water droplets dispersed in oil through a pre-wetted mesh membrane.

To achieve the successful separation of emulsions containing fine dispersed droplets and low volume fractions, a membrane with pore sizes comparable to or smaller than the droplet size is typically required. Although this approach is effective, its utilization is limited to the separation of emulsions with relatively large droplets. To overcome this limitation, a secondary membrane can be formed on the primary membrane to reduce pore size, but this can also be time-consuming and costly. Therefore, a facile and effective method is still required to be developed for separating emulsions with fine droplets. We introduce a pre-wetted mesh membrane with a pore size significantly larger than droplets, easily fabricated by wetting a hydrophilic stainless-steel mesh with water. Applying this membrane to emulsion separation via gravity-driven flow confirms a high efficiency greater than 98%, even with droplets approximately 10 times smaller than the pore size.

Heavy metal contamination assessment and potential human health risk of water quality of lakes situated in the protected area of Tisa, Romania.

Protected areas are significant due to the high value of natural resources they shelter. This study's primary objective is to assess the quality status of the water resources (13 lakes and Tisa River) localized in the protected area of Tisa River on the territory of Romania. A number of 13 lakes and surface water (Tisa River) situated in the protected area through the Natura 2000 ecological network are studied. The chemistry and potential pollution status were analyzed by measuring and analyzing a set of twenty elements and sixteen physico-chemical parameters. The potential impact of anthropogenic activities was settled through the applied analysis and obtained results. A potential human health risk was noticed. Results indicated that waters are rich in Ni and Fe probably due to interaction with groundwater rich in Fe and Ni. Waters are characterized by potential contamination, which if directly or through the food chain consumed could negatively influence the human health. Piper and Gibbs plots indicated that the studied waters are divided into three categories based on water-rock interactions: mixed Ca2+-Na+-HCO3-, CaCO3-, and Na+-HCO3-. Likewise, the applied pollution indices (Heavy metal Pollution Index, HPI and Heavy metal Evaluation Index, HEI) indicated three pollution categories correlated to the As, Ni and Fe amounts. The findings of this research imply that the chemistry of the studied lakes and surface waters is influenced by the geogenic origin and emergence of anthropogenic activities. The significance of this research is related to understanding of mechanisms that influence the water quality, improving and conserving the natural water resources, and correspondingly understanding if any potential human health risks could be identified.

TMAO perturbs intermolecular vibrational motions of water revealed by low-frequency modes.

Trimethylamine N-oxide (TMAO) as a representative natural osmolyte has received much attention because of its unique properties, including enhancement of hydrogen bonding networks in liquid water and stabilization of three-dimensional structures of proteins in living organisms. As a hydrogen bond maker and/or a protein stabilizer, its hydrated structures and orientation dynamics in aqueous solutions have been investigated by various spectroscopic methods. Particularly, distinct from other natural osmolytes, it has been found that TMAO molecules form complexes with water molecules even at low concentrations, showing extraordinarily long lifetimes and much larger effective dipole moments. In this study, we demonstrated that collective motions of water molecules are closely correlated to TMAO molecules, as revealed by the changes of the librational modes observed in hyper-Raman (HR) spectra in the low-frequency region (<1000 cm-1) for the first time. Based on HR spectra of the TMAO solutions at submolar concentrations, we observed that the librational bands originating from water apparently upshift (∼15 cm-1) upon the addition of TMAO molecules. Compared to the OH stretching band of water showing a negligible downshift (<5 cm-1), the librational bands of water are more sensitive to reflect changes in the hydrogen bonding networks in the TMAO solutions, suggesting formation of transient TMAO-water complexes plays an essential role toward surrounding water molecules in perturbing their librational motions. We expect to provide a supplementary approach to understand that water molecules in TMAO aqueous solutions are strongly affected by TMAO molecules, different from other osmolytes.

Intramolecular and Water Mediated Tautomerism of Solvated Glycine.

Understanding tautomerism and characterizing solvent effects on the dynamic processes pose significant challenges. Using enhanced-sampling molecular dynamics based on state-of-the-art deep learning potentials, we investigated the tautomeric equilibria of glycine in water. We observed that the tautomerism between neutral and zwitterionic glycine can occur through both intramolecular and intermolecular proton transfers. The latter proceeds involving a contact anionic-glycine-hydronium ion pair or separate cationic-glycine-hydroxide ion pair. These pathways with comparable barriers contribute almost equally to the reaction flux.

Radiographic identification of challenging gastrointestinal tract foreign bodies: a descriptive study of how appearance varies in air versus water to aid interpretation.

OBJECTIVE: To provide veterinarians with updated radiographic descriptions of select radiolucent foreign material in a simulated gastrointestinal environment. SAMPLE: 368 veterinarian respondents from the US. METHODS: An online survey was administered between June 18, 2023, and July 2, 2023, through a private veterinarian-based social media group. Representative commonly ingested foreign bodies were radiographed surrounded by air and water to simulate being within the gastrointestinal tract. Two examiners evaluated and qualified the opacity of the objects for each environment. RESULTS: The private social media group had a total of 3,900 members including veterinarians from all disciplines. A total of 362 small animal veterinarians (9.3% of the group) responded to the study reporting a total of 123 foreign objects that were not causing mechanical obstruction at the time of initial presentation. Sixty-eight foreign bodies were reported greater than or equal to 5 times and grouped as balls (n = 4), food (9), fabric (14), wood (3), soft plastic (14), hard plastic (18), or other (6). Most (98.5% [67/68]) objects were easily identifiable in air. In water, 23.5% (16/68) of the objects were obscured, and 39.7% (27/68) had inversion of the major opacity when compared to the opacity in air. CLINICAL RELEVANCE: The opacity of some ingested radiolucent material can invert relative to air or fluid, which may reflect substantial differences in detection following repositioning. When known dietary indiscretion occurs, radiographing a sample of the material in air and water will improve the accuracy of assessment.

Effects of simulated long-term exposure to bottled, neutral pH electrolyzed oxidizing water on the properties of denture base resins.

STATEMENT OF PROBLEM: Denture stomatitis can pose serious health risks, especially to older people. Chemical denture cleaning agents must be effective, yet not adversely affect the longevity of removable dentures. Ready-to-use (RTU) neutral pH electrolyzed oxidizing water (EOW) is an effective biocide against Candida albicans biofilms on denture resins, but the effects of daily disinfection with EOW on the physical and mechanical properties of resins have not been established. PURPOSE: The purpose of this in vitro study was to investigate the effects of simulated long-term exposure to RTU EOW on the color, surface characteristics, and flexural strength of denture base resins. MATERIAL AND METHODS: Heat-polymerized (HP), 3D printed (3D) and computer-aided design and computer-aided manufacture (CAD-CAM)-milled (CC) denture resin specimens (square: 20×20×3.3 mm; beam: 64×10×3.3 mm) were immersed in tap water (TW), RTU EOW (Neutral Anolyte ANK; Envirolyte; EOW), or a commercial denture cleaning tablet solution (Polident 3-Minute; Glaxo SmithKline; PD), mimicking a 5-minute once daily disinfection routine performed up to 3.0 years. Color and surface roughness were recorded (n=3, squares), and changes in color (∆E00) and surface roughness (∆Ra) were calculated. Flexural strength (n=12, beams) and surface hardness (n=18, beams) were measured with a universal testing machine. The fractured surfaces of specimens were examined by scanning electron microscopy and energy dispersive spectroscopy. Data were assessed by performing the Shapiro-Wilk or D'Agostino and Pearson normality tests. Two-way ANOVA or the Kruskal-Wallis test with a post hoc Tukey HSD or Dunn multiple comparisons (α=.05) was used for statistical analyses. RESULTS: No significant changes were found in either color or surface roughness for HP, 3D, and CC resins after 1.5-year and 3.0-year immersion in any of the agents (P>.05). The surface hardness of 3D resins reduced by 14% with TW and by 23% with EOW and PD at 3.0 years. The flexural strengths of all 3 resins were unaffected by 3.0-year immersion (P>.05). CONCLUSIONS: Simulated long-term immersion disinfection with RTU neutral pH EOW did not adversely affect the physical and mechanical properties of HP or CC denture resins.

Dataset on the optimization of a photovoltaic solar water pumping system in terms of pumping performance in remote areas of Phayao province using response surface methodology.

The Response Surface Methodology (RSM) was employed to examine the impact of the pumping system in a photovoltaic solar water pumping system, while operating under ideal conditions. The input parameters for optimizing the pump performance of the PV water pump include three parameters: Solar irradiance (550-950, W/m2), temperature (30-45, °C), and voltage (420-540, V). The experimental values of PV water pump efficiency showed that the efficiency of PV water pumps was in the range of 55.24-80.80% of the experiment. At a solar irradiance of 750 W/m2, a voltage of 480 V and a temperature of 37.5 °C shows the maximum efficiency of the solar PV water pump systems was 80.80% under optimal conditions. This work demonstrates the potential of solar water pumps as a reliable, cost-effective, and environmentally friendly solution to support agriculture in remote areas. In addition, the costs and economic parameters of solar photovoltaic water pumps and conventional systems were compared by the social return on investment (SROI) evaluation. This indicates that sales are profitable or create social value that benefits society and local stakeholders in remote areas. This work demonstrates the potential of solar water pumps as a reliable, cost-effective, and environmentally friendly solution to support agriculture in remote areas.

eDNA Adsorption onto Microplastics: Impacts of Water Chemistry and Polymer Physiochemical Properties.

Adsorption of biomacromolecules onto polymer surfaces, including microplastics (MPs), occurs in multiple environmental compartments, forming an ecocorona. Environmental DNA (eDNA), genetic material shed from organisms, can adsorb onto MPs which can potentially either (1) promote long-range transport of antibiotic resistant genes or (2) serve to gain insights into the transport pathways and origins of MPs by analyzing DNA sequences on MPs. However, little is known about the capacity of MPs to adsorb eDNA or the factors that influence sorption, such as polymer and water chemistries. Here we investigated the adsorption of extracellular linear DNA onto a variety of model MP fragments composed of three of the most environmentally prevalent polymers (polyethylene, polyethylene terephthalate, and polystyrene) in their pristine and photochemically weathered states. Batch adsorption experiments in a variety of water chemistries were complemented with nonlinear modeling to quantify the rate and extent of eDNA sorption. Ionic strength was shown to strongly impact DNA adsorption by reducing or inhibiting electrostatic repulsion. Polyethylene terephthalate exhibited the highest adsorption capacity when normalizing for MP specific surface area, likely due to the presence of ester groups. Kinetics experiments showed fast adsorption (majority adsorbed under 30 min) before eventually reaching equilibrium after 1-2 h. Overall, we demonstrated that DNA quickly binds to MPs, with pseudo-first- and -second-order models describing adsorption kinetics and the Freundlich model describing adsorption isotherms most accurately. These insights into DNA sorption onto MPs show that there is potential for MPs to act as vectors for genetic material of interest, especially considering that particle-bound DNA typically persists longer in the environment than dissolved DNA.

Harnessing Pb-S Interactions for Long-Term Water Stability in Cesium Lead Halide Perovskite Nanocrystals.

Lead halide perovskite nanocrystals (LHP NCs) have garnered attention as promising light-harvesting materials for optoelectronics and photovoltaic devices, attributed to their impressive optoelectronic properties. However, their susceptibility to moisture-induced degradation has hindered their practical applications. Despite various encapsulation strategies, challenges persist in maintaining their stability and optoelectronic performance simultaneously. Here, a ligand exchange approach is proposed using (11-mercaptoundecyl)-N,N,N-trimethylammonium bromide (MUTAB) to enhance the stability and dispersibility of CsPbBr3 (CPB) NCs in aqueous environments. MUTAB enables effective surface passivation of the CPB NCs via robust Pb-S interactions at the S-terminal while concurrently directing water molecules through the unbound cationic N-terminal or vice versa, ensuring water dispersibility and stability. Spectroscopic analysis confirms retained structural and optical integrity post-ligand exchange. Crucially, MUTAB-bound CPB NCs exhibit sustained charge transfer properties, demonstrated by aqueous colloidal oxidation reactions. This ligand exchange strategy offers a promising pathway for advancing LHP NCs toward practical optoelectronic and photocatalytic applications.

The pH acidity and nitrate accumulation by plasma discharge enhanced the growth and phytochemicals of soybean sprouts grown in reused water.

This study investigated the effect of plasma treatment on reused water and evaluated the interactions of the plasma-treated water (PTW) with plants or microbes to determine the optimal PTW for reuse. The repeated treatment gradually accumulated nitrate (NO3-) in the PTW and lowered its pH; afterward, it led to the sprouted soybeans accumulating other inorganic ions in the PTW. The biomass of soybean sprouts was enhanced by the accumulated NO3- but decreased due to the pH effect. Meanwhile, the acidic pH reduced the microbial counts, but they increased after sprinkling the PTW over the sprouts. The optimal PTW in our study, which had a gradual increase of NO3- (≤321.8 mg·L-1) with an acceptable pH (≥pH 3), significantly enhanced the biomass by 4.2% compared to the untreated control. Additionally, it increased the total content of amino acids and isoflavones by 9% and 18% in the growing part, respectively.

Spiritual Holy Water Sites in Ethiopia: Unrecognized High-Risk Settings for Transmission of Pulmonary Tuberculosis.

Ethiopia is a high-tuberculosis (TB) burden country with 157 new cases per 100,000 people, with 23,800 TB-related deaths in 2020. In Ethiopia, TB patients have different healthcare-seeking behaviors. They frequently visit spiritual places, such as holy water sites (HWSs), to seek treatment for their illness spiritually. This study examined the prevalence of pulmonary TB (PTB) and drug susceptibility profiles of Mycobacterium tuberculosis (MTB) isolates among spiritual HWS attendees in Northwest Ethiopia. A cross-sectional study was conducted from June 2019 to March 2020. Sputum samples were collected, processed, and cultured using Löwenstein-Jensen (LJ) culture medium. Second-generation line probe assays (LPAs), GenoType®MTBDRplus VER2.0 and GenoType®MTBDRsl VER2.0, were used to detect anti-TB drug-resistant isolates. STATA 17 was utilized to perform descriptive statistics, bivariate, and multivariate regression analyses. Of 560 PTB-symptomatic participants, 21.8% ((95% confidence interval (95 CI): 18.4-25.2%)) were culture-positive, resulting in a point prevalence of 1,183/100,000 attendees. Amongst HWS attendees, culture-positive TB occurred most commonly in persons 18-33 years of age (28.5% (95 CI 23.4-34.3%)). Other participant characteristics significantly associated with culture-positive PTB were as follows: rural residents (adjusted odds ratio (aOR) 2.65; 95 CI 1.38-5.10), married participants (aOR 2.43; 95 CI 1.28-4.63), family members >5 per household (aOR 1.84; 95 CI 1.04-3.24), and sharing living space (aOR 10.57; 95 CI 3.60-31.13). Also, among 438 participants followed for 12 months after showing negative TB culture results while at the HWS, 6.8% (95 CI 4.4-9.4%) developed or contracted culture-positive TB post-residency at the HWSs. Of the 122 tested isolates, 20 (16.4%) were isoniazid (INH) and/or rifampicin (RIF) resistant. Multidrug-resistant (MDR) TB was detected in 15 cases (12.3%), five of which were fluoroquinolones (FLQs) resistant. The findings from this study should raise a concern about HWSs as potential high-risk settings for TB transmission. It is recommended that appropriate control measures be instituted that include compulsory TB testing and tightened infection control at HWSs, where an increased risk exists for transmission of TB.

Genomic analysis reveals deep population divergence in the water snake Trimerodytes percarinatus (Serpentes, Natricidae).

Although several phylogeographic studies of Asian snakes have been conducted, most have focused on pitvipers, with non-venomous snakes, such as colubrids or natricids, remaining poorly studied. The Chinese keelback water snake (Trimerodytes percarinatus Boulenger) is a widespread, semiaquatic, non-venomous species occurring in China and southeastern Asia. Based on mitochondrial DNA (mtDNA) and single nucleotide polymorphism (SNP) data, we explored the population genetic structure, genetic diversity, and evolutionary history of this species. MtDNA-based phylogenetic analysis showed that T. percarinatus was composed of five highly supported and geographically structured lineages. SNP-based phylogenetic analysis, principal component analysis, and population structure analysis consistently revealed four distinct, geographically non-overlapping lineages, which was different from the mtDNA-based analysis in topology. Estimation of divergence dates and ancestral area of origin suggest that T. percarinatus originated ~12.68 million years ago (95% highest posterior density: 10.36-15.96 Mya) in a region covering southwestern China and Vietnam. Intraspecific divergence may have been triggered by the Qinghai-Xizang Plateau uplift. Population demographics and ecological niche modeling indicated that the effective population size fluctuated during 0.5 Mya and 0.002 Mya. Based on the data collected here, we also comment on the intraspecific taxonomy of T. percarinatus and question the validity of the subspecies T. p. suriki.

Sphingobium cyanobacteriorum sp. nov., isolated from fresh water.

A novel Gram-stain-negative, yellow-pigmented, short rod-shaped bacterial strain, HBC34T, was isolated from a freshwater sample collected from Daechung Reservoir, Republic of Korea. The results of 16S rRNA gene sequence analysis indicated that HBC34T was affiliated with the genus Sphingobium and shared the highest sequence similarity to the type strains of Sphingobium vermicomposti (98.01 %), Sphingobium psychrophilum (97.87 %) and Sphingobium rhizovicinum (97.59 %). The average nucleotide identity (ANI) and digital DNA-DNA hybridisation (dDDH) values between HBC34T and species of the genus Sphingobium with validly published names were below 84.01 and 28.1 %, respectively. These values were lower than the accepted species-delineation thresholds, supporting its recognition as representing a novel species of the genus Sphingobium. The major fatty acids (>10 % of the total fatty acids) were identified as summed feature 8 (C18 : 1ω7c and/or C18 : 1ω6c) and summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c). The main polar lipids were phosphatidylglycerol, phosphatidylcholine, phosphatidylethanolamine, two phospholipids and two unidentified polar lipids. The respiratory quinone was Q-10. The genomic DNA G+C content of HBC34T was 64.04 %. The polyphasic evidence supports the classification of HBC34T as the type strain of a novel species of the genus Sphingobium, for which the name Sphingobium cyanobacteriorum sp. nov is proposed. The type strain is HBC34T (= KCTC 8002T= LMG 33140T).

Virus inactivation in low ozone exposure water reuse applications.

In drinking water applications, an ozone exposure (Ct) based framework has been historically used to validate ozone disinfection. However, significant viral inactivation can be achieved with little to no measurable ozone exposure. Additionally, ozone exposure depends on multiple water quality variables as well as the calculation/ozone measurement method used. In this study, we evaluated alternative ozone monitoring frameworks as well as the impact of water quality variables on ozone decay kinetics and virus/coliform inactivation. Here we show that both change in UV254 absorbance and applied O3:TOC were well correlated with viral inactivation and these frameworks were resilient to changes in water quality. Both increasing temperature (12-30 °C) and pH (5.5-8.4) was shown to significantly increase the ozone decay rate and decreased the resulting ozone exposure by as much as ∼90% in the case of pH. However, due to the increased reaction rate of ozone with viruses at elevated temperature and pH, there was only a minor impact (∼20% in the case of pH) in overall disinfection performance for a given O3:TOC. These frameworks were also considered for variable source water with TOC (5-11 mg/L) and TSS (1.2-5.8 mg/L). Change in UV254 absorbance or applied ozone dose (mg/L) were the strongest indicators of disinfection performance for source waters of variable TOC, however site-specific testing may be needed to apply this framework. Challenge testing with influent nitrite indicated that ozone disinfection performance is significantly impacted (>50% reduction in inactivation) in the presence of nitrite thus enforcing the importance of accounting for this value in the applied ozone dose. Multi-point ozone dissolution was investigated as an alternative ozone application method that may present a benefit with respect to overall disinfection performance especially if nitrite was present. Developing and validating these alternative monitoring frameworks and ozone application methods is imperative in water reuse applications where unnecessary elevated ozone exposure may lead to harmful byproduct formation.

Exploiting the potential of a novel "in-situ latent heat recovery" in hollow-fiber vacuum membrane distillation process for simultaneously improved water production and energy efficiency.

Thermal driven membrane distillation (MD) technology is a promising method for purifying & recovering various salty (especially high salty) or contaminated wastewaters with low-grade heat sources. However, the drawbacks of "high energy consumption" and "high cooling water consumption" pose special challenges for the future development of this technology. In this article, we report an innovative strategy called "in-situ heat transfer", which is based on the jacketed structure composed of hollow fiber membranes and capillary heat exchange tubes, to simplify the migration steps of condensation latent heat in MD heat recovery process. The results indicate that the novel heat recovery strategy exhibits higher growth rates both in the flux and gained output ratio (47.4 % and 173.1 %, respectively), and further reduces the system's dependence on cooling water. In sum, under the control of the "in-situ heat transfer" mechanism, the functional coupling of "vapor condensation (exothermic)" and "feed evaporation (endothermic)" in limited-domain space is an attractive alternative solution, because it eliminates the disadvantages of the imbalance between heat supply and demand in traditional heat recovery methods. Our research may facilitate the development of MD heat recovery modules for industrial applications, which will help to further achieve the goal of energy saving and emission reduction.

Influence of the use of remediated soil and agricultural drainage water on the safety of tomato fruits.

The objective of this study is to assess the effectiveness of different techniques employed in remediating contaminated soil and wastewater ecosystems to ensure the safety of tomato fruits (Solanum lycopersicum L. var. cerasiforme) cultivated in these environments. Three biochemical techniques T1-T3, besides two controls CCU and CCT, were used to remediate contaminated soil ecosystems using rock phosphate, elemental sulfur, bentonite, phosphate-dissolving bacteria, and Thiobacillus sp. The contaminated agricultural drainage water was remediated by a down-flow hanging sponge (DHS) system. Two experiments were conducted: a pot experiment took place in the greenhouse at the National Research Center of Cairo (Egypt) and a field experiment was carried out at the basin site in the village of El-Rahawy, applying the optimal treatment(s) identified from the greenhouse experiment. The health risk assessment for potentially toxic elements (PTEs) in the harvested tomato fruits was conducted by calculating estimated daily intake (EDI) and target risk quotient (THQ) values. Results from the greenhouse experiment indicated the high effectiveness of the DHS technique in remediating El-Rahawy agricultural drainage water. The content of PTEs after remediation was significantly reduced by 100%, 93.3%, 97.8, and 77.8% for cadmium, copper, manganese, and zinc, respectively. The application of treated drainage water in employed reclaimed soil ecosystems led to a remarkable decrease in PTE levels, especially under T3 treatment; the reduction reached 89.4%, 89.5%, and 78.4% for nickel, copper, and zinc, respectively. The bioremediation technique also reduced the content of PTEs in tomato fruits harvested from both greenhouse and field experiments; the cadmium content, for example, was below detection limits in all treatments. The T3 treatment applied in the greenhouse experiment caused the highest percentage decrease among the employed PTEs in tomato fruits grown in the greenhouse. The same trend was also reached in the field experiment. Microbiological analyses of tomato fruits revealed that E. coli, Salmonella, or S. aureus bacteria were identified on tomato fruits harvested from either greenhouses or field experiments, showing that the counted total bacteria were higher under the field experiment compared to the greenhouse experiment. The health risk assessment parameter THQ was below 1.0 for all tested metals under all treatments. This means that no potential health risk is expected from consuming tomato products produced under the different employed remediation treatments. In conclusion, the employed bioremediation techniques successfully reduced the PTE content and microbial load in both soil and drainage water ecosystems and in harvested tomato fruits. Henceforth, no health risks are expected from the consumption of this product.

Nonisospectral water wave field: Fast and adaptive modal identification and prediction via reduced-order nonlinear solutions.

Real-world water wave fields exhibit significant nonlinear and nonisospectral characteristics, making it challenging to predict their evolution by relying solely on numerical simulation or exact solutions using integrable system theory. Hence, this paper introduces a fast and adaptive method of modal identification and prediction in nonisospectral water wave fields using the reduced-order nonlinear solution (RONS) scheme. Specifically, we discuss the coarse graining and mode extraction of wave field snapshots from the data-driven and physics-driven perspectives and utilize the RONS method for principle modal prediction of nonisospectral water wave fields. This is achieved by investigating the standard and nonisospectral Gardner system describing nonlinear water waves as a demonstration. Through detailed comparison and analysis, the fundamental solitary behaviors and dispersive effects in the Gardner system are discussed. Subsequently, a neighbor approximation is developed that combines the essences of symbolic precomputation and numerical computation in the RONS procedure, which exploits the locality of nonlinear interactions in water wave fields.

Interaction of soliton gases in deep-water surface gravity waves.

Soliton gases represent large random soliton ensembles in physical systems that display integrable dynamics at leading order. We report hydrodynamic experiments in which we investigate the interaction between two beams or jets of soliton gases having nearly identical amplitudes but opposite velocities of the same magnitude. The space-time evolution of the two interacting soliton gas jets is recorded in a 140-m-long water tank where the dynamics is described at leading order by the focusing one-dimensional nonlinear Schrödinger equation. Varying the relative initial velocity of the two species of soliton gas, we change their interaction strength and we measure the macroscopic soliton gas density and velocity changes due to the interaction. Our experimental results are found to be in good quantitative agreement with predictions of the spectral kinetic theory of soliton gas despite the presence of perturbative higher-order effects that break the integrability of the wave dynamics.

Does WASH FIT improve water, sanitation, and hygiene and related health impacts in healthcare facilities? A systematic review.

Introduction: Environmental health services (e.g., water, sanitation, hygiene, cleaning, waste management) in healthcare facilities are important to improve health outcomes and strengthen health systems, but coverage gaps remain. The World Health Organization and United Nations Children's Fund developed WASH FIT, a quality improvement tool, to help assess and improve environmental health services. Fifty-three countries have adopted it. However, there is little evidence of its effectiveness. This systematic review evaluates whether WASH FIT improves environmental health services or associated health outcomes and impacts. Methods: We conducted database searches to identify relevant studies and extracted data on study design, healthcare facility characteristics, and inputs, activities, outputs, outcomes, and impacts associated with WASH FIT. We summarized the findings using a logic model framework and narrative synthesis. Results: We included 31 studies in the review. Most inputs and activities were described qualitatively. Twenty-three studies reported quantitative outputs, primary WASH FIT indicator scores, and personnel trained on WASH FIT. Nine studies reported longitudinal data demonstrating changes in these outputs throughout WASH FIT implementation. Six studies reported quantitative outcomes measurements; the remainder described outcomes qualitatively or not at all. Common outcomes included allocated funding for environmental health services, community engagement, and government collaboration, changes in knowledge, attitudes, or practices among healthcare staff, patients, or community members, and policy changes. No studies directly measured impacts or evaluated WASH FIT against a rigorous control group. Conclusions: Available evidence is insufficient to evaluate WASH FIT's effects on outputs, outcomes, and impacts. Further effort is needed to comprehensively identify the inputs and activities required to implement WASH FIT and to draw specific links between changes in outputs, outcomes, and impacts. Short-term opportunities exist to improve evidence by more comprehensive reporting of WASH FIT assessments and exploiting data on health impacts within health management information systems. In the long term, we recommend experimental studies. This evidence is important to ensure that funding invested for WASH FIT implementation is used cost-effectively and that opportunities to adapt and refine WASH FIT are fully realized as it continues to grow in use and influence. Highlights: WASH FIT is highly influential, but little is known about its effectivenessWe reviewed WASH FIT's effects on environmental health service outputs and health impactsNine studies measured outputs longitudinally; none directly measured health impactsNo studies compared WASH FIT's performance against a rigorous control groupEvidence is insufficient to assess WASH FIT's effects on outputs or health impacts.