Fast finite difference solver for optical microscopy in deep biological tissue.

Optical scattering poses a significant challenge to high-resolution microscopy within deep tissue. To accurately predict the performance of various microscopy techniques in thick samples, we present a computational model that efficiently solves Maxwell's equation in highly scattering media. This toolkit simulates the deterioration of the laser beam point spread function (PSF) without making a paraxial approximation, enabling accurate modeling of high-numerical-aperture (NA) objective lenses commonly employed in experiments. Moreover, this framework is applicable to a broad range of scanning microscopy techniques including confocal microscopy, stimulated emission depletion (STED) microscopy, and ground-state depletion microscopy. Notably, the proposed method requires only readily obtainable macroscopic tissue parameters. As a practical demonstration, we investigate the performance of Laguerre-Gaussian (LG) versus Hermite-Gaussian (HG) depletion beams in STED microscopy.

Structural and optical properties of alginate-based antibacterial dressing with calcium phosphate and zinc oxide for biodegradable wound painting applications.

The skin is the outermost part of the body. Although susceptible to damage, the skin is in direct contact with the external environment. Wound dressing is a clinical method that plays a vital role in wound healing. Herein, we developed an antibacterial wound dressing using alginate as the basic material. The dressing was prepared using the solvent casting method, which was used to analyze the effects of adding CaP and ZnO on its structural, optical, and antibacterial properties. Adding CaP exhibited strong but stiff mechanical properties, unlike the CaP/ZnO, which possessed high strength and elasticity. The optical properties of sample S2 did not have a considerable impact. By contrast, the addition of ZnO to sample S3 notably increases the wavelength and absorption value. The diameter of the inhibition zone for S. aureus bacteria exhibited a successive increase in its antibacterial properties, and sample S3 exhibited the highest value. Thus, sample S3 is the most promising wound dressing concerning speeding up the wound healing process because it possesses the most optimal mechanical, optical, and antibacterial properties. The main limitation to be addressed is that sample S3 cannot be easily digested in the environment.

Effect of CPPU on optical properties of strawberry in near-infrared range during growth.

To investigate the effect of CPPU (forchlorfenuron) on optical properties of strawberry during growth, the optical properties (absorption coefficient (µa) and reduced scattering coefficient (µs')) of strawberry treated with CPPU solutions at different concentrations (0, 2.5, 5.0 and 7.5 mg/L) were measured in white, color turning and red stages by using a single integrating sphere system over near-infrared wavelength range of 900-1700 nm. The physicochemical properties, i.e., single fruit weight, soluble solids content, firmness and moisture content, as well as microstructure of strawberry were also investigated. The results showed that in white stage, the µa of strawberry treated with 7.5 mg/L CPPU was significantly (p ≤ 0.05) lower than that of untreated strawberry at absorption peak of 1411 nm. In color turning stage, the µs' of strawberry treated with 5 mg/L CPPU was significantly lower than that of treated with 2.5 mg/L at absorption peaks of 975, 1197 and 1411 nm. In red stage, the µa of strawberry treated with 2.5 mg/L CPPU was significantly (p ≤ 0.05) different from that of treated with 7.5 mg/L at 1197 nm. The study indicates that the optical properties of strawberry were affected by CPPU, and it provides useful information for identifying CPPU treated strawberry.

Optical, vibrational, and photoluminescence properties of holmium-doped boro-bismuth-germanate glasses.

Holmium (Ho3+)-doped boro-bismuth-germanate glasses having the chemical composition (30-x)B2O3 + 20GeO2 + 20Bi2O3 + 20Na2O + 10Y2O3 + xHo2O3, where x = 0.1, 0.5, 1.0, and 2.0 mol% were prepared by melt-quenching technique. The prepared glasses were examined for thermal, optical, vibrational, and photoluminescent properties. The prepared glasses were found to be thermally very stable. The optical bandgap and Urbach energies of 0.1 mol% Ho2O3-doped boro-bismuth-germanate glass were calculated to be 3.3 eV and 377 MeV, respectively, using the absorption spectrum. The Judd-Ofelt analysis was performed on the 0.1 mol% Ho2O3-doped glass and compared the obtained parameters with literature. The branching ratio (ß) and emission cross-section (σem) of the green band were determined to be 0.7 and 0.24 × 10-20 cm2, respectively. Under 450 nm excitation, a strong green emission around 550 nm was observed and assigned to the (5S2 + 5F4) → 5I8 (Ho3+) transition. Upon an increase of Ho2O3 content from 0.1 to 2.0 mol%, the intensities of all observed emission bands as well as decay time of the (5S2 + 5F4) → 5I8 transition have been decreased gradually. The reasons behind the decrease in emission intensity and decay time were discussed. The strong green emission suggests that these glasses may be a better option for display devices and green emission applications.

Optical properties investigation and multicolor behavior of neodymium (Nd3+)-doped oxyfluoride silicate glasses SiO2-PbO-PbF2.

The aim of this research is to investigate novel compositions of oxyfluoride glasses doped with Neodymium (Nd3+) rare earth ions in the visible spectrum. This area has not been extensively studied in the existing literature, so it is vital to understand the favorable photoluminescence characteristics within this part of the electromagnetic spectrum. Therefore, we synthesized and characterized SiO2-PbO-PbF2 (SPF) doped with 1% neodymium (Nd3+) ions glasses. Spectroscopic analyses, based on Judd-Ofelt theory, were conducted on absorption spectra. These analyses enabled to determine absorption cross-sections, transition probabilities, and Judd-Ofelt intensity parameters Ω2, Ω4, and Ω6 for the different transition. Additionally, we calculated various radiative properties, such as branching ratios, integrated cross-sections, radiative lifetimes, emission cross-section, optical gain, and the multicolor behavior (chromaticity coordinates, CIE diagram) under different excitation wavelengths. The results suggest promising prospects for using these oxyfluoride silicate glasses doped with Nd3+ as a fluorophore, potentially for lasing materials around 630-nm emission and in other photonic applications.

Synthesis, structural, and optical behavior of erbium-doped silicophosphate glasses for photonics applications.

Erbium-incorporated silicophosphate glasses are very desirable in principal sectors such as photonics, optoelectronics, lasers, and illuminating diodes. The focus of the current investigation has been on determining how the erbium dopant affects the optical, physical, and structural characteristics of the silicophosphate-based glasses. The pure silicophosphate glasses and doped with various contents of erbium were prepared by the sol-gel process in this work. The noncrystalline character of the glasses synthesized was confirmed by the XRD patterns that were obtained. The optical measurement showed that the addition of trivalent erbium ions resulted in an increase in the refractive index of the samples and a decrease in their energy band gap values. It demonstrated the presence of P-O-P linkage stretching vibration modes that were both symmetrical and asymmetrical, P-O in PO4 bending vibration modes, OH group elongating and flexure vibrations, and P-O-H water absorption in glasses. The theoretical values of the optical basicity (Ʌth) increased from 0.465 to 0.472, while the values of the interaction parameter (A) decreased from 0.218 to 0.214 Š- 3 $$ {\overset{\ocirc }{\mathrm{A}}}^{-3} $$ . Silicophosphate glasses doped with trivalent erbium ions show promise as optoelectronic and optical filter system materials.

Label-free imaging diagnosis and collagen-optical evaluation of endometrioid adenocarcinoma with multiphoton microscopy.

The assessment of tumor grade and pathological stage plays a pivotal role in determining the treatment strategy and predicting the prognosis of endometrial cancer. In this study, we employed multiphoton microscopy (MPM) to establish distinctive optical pathological signatures specific to endometrioid adenocarcinoma (EAC), while also assessing the diagnostic sensitivity, specificity, and accuracy of MPM for this particular malignancy. The MPM technique exhibits robust capability in discriminating between benign hyperplasia and various grades of cancer tissue, with statistically significant differences observed in nucleocytoplasmic ratio and second harmonic generation/two-photon excited fluorescence intensity. Moreover, by utilizing semi-automated image analysis, we identified notable disparities in six collagen signatures between benign and malignant endometrial stroma. Our study demonstrates that MPM can differentiate between benign endometrial hyperplasia and EAC without labels, while also quantitatively assessing changes in the tumor microenvironment by analyzing collagen signatures in the endometrial stromal tissue.

Optical-resolution photoacoustic microelastography system for elasticity mapping: Phantom study and practical application.

Elastography is a noninvasive technique for characterizing the mechanical properties of biological tissues. Conventional methods have limitations in resolution and sensitivity, hindering disease detection in clinical diagnostics. To address these issues, this study developed an optical-resolution photoacoustic microelastography (OR-PAME) system. Using an agar tissue phantom with varying agar concentrations and contrast agents, PAME evaluated elasticity distribution under compression in both lateral and axial dimensions. It indirectly measured elastic properties by correlating photoacoustic responses, temporal lags, and induced displacement. We also applied the system to the study of the distribution of elastic characteristics of the liver tissue after ablation, which confirmed the potential of OR-PAME in the study of elastic characteristics. Quantitative analysis showed greater lateral displacement in regions with reduced agar concentrations, indicating decreased stiffness. PAME also detected vertical displacement along the axial plane, validating its efficacy in elastographic imaging. By improving resolution and penetration, PAME provides superior visualization of elasticity distribution. Its methodology correlates microstructural alterations with tissue biomechanics, holding potential implications in medical diagnostics.

Virtual-point-based deconvolution for optical-resolution photoacoustic microscopy.

Optical-resolution photoacoustic microscopy (OR-PAM) has been increasingly utilized for in vivo imaging of biological tissues, offering structural, functional, and molecular information. In OR-PAM, it is often necessary to make a trade-off between imaging depth, lateral resolution, field of view, and imaging speed. To improve the lateral resolution without sacrificing other performance metrics, we developed a virtual-point-based deconvolution algorithm for OR-PAM (VP-PAM). VP-PAM has achieved a resolution improvement ranging from 43% to 62.5% on a single-line target. In addition, it has outperformed Richardson-Lucy deconvolution with 15 iterations in both structural similarity index and peak signal-to-noise ratio on an OR-PAM image of mouse brain vasculature. When applied to an in vivo glass frog image obtained by a deep-penetrating OR-PAM system with compromised lateral resolution, VP-PAM yielded enhanced resolution and contrast with better-resolved microvessels.

Optical parameters of healthy and tumor breast tissues in mice.

Knowledge of the optical parameters of tumors is important for choosing the correct laser treatment parameters. In this paper, optical properties and refraction indices of breast tissue in healthy mice and a 4T1 model mimicking human breast cancer have been measured. A significant decrease in both the scattering and refractive index of tumor tissue has been observed. The change in tissue morphology has induced the change in the slope of the scattering spectrum. Thus, the light penetration depth into tumor has increased by almost 1.5-2 times in the near infrared "optical windows." Raman spectra have shown lower lipid content and higher protein content in tumor. The difference in the optical parameters of the tissues under study makes it possible to reliably differentiate them. The results may be useful for modeling the distribution of laser radiation in healthy tissues and cancers for deriving optimal irradiation conditions in photodynamic therapy.

Optical coupling of individual air-suspended carbon nanotubes to silicon microcavities.

Carbon nanotubes are a telecom band emitter compatible with silicon photonics, and when coupled to microcavities, they present opportunities for exploiting quantum electrodynamical effects. Microdisk resonators demonstrate the feasibility of integration into the silicon platform. Efficient coupling is achieved using photonic crystal air-mode nanobeam cavities. The molecular screening effect on nanotube emission allows for spectral tuning of the coupling. The Purcell effect of the coupled cavity-exciton system reveals near-unity radiative quantum efficiencies of the excitons in carbon nanotubes.

Quantitative evaluation of the impact of variation of optical parameters on the estimation of blood hematocrit and oxygen saturation for dual-wavelength photoacoustics.

Photoacoustic (PA) spectroscopy is considered to be one of the most effective ways to measure the levels of hematocrit (H) and oxygenation saturation (S O 2) of blood, which are essential for diagnosing blood-related illnesses. This simulation study aims to investigate the impact of individual optical parameters, i.e., optical absorption coefficient (µ a), scattering coefficient (µ s), and anisotropy factor (g), on the accuracy of this technique in estimating the blood properties. We first performed the Monte Carlo simulations, using realistic optical parameters, to obtain the fluence maps for various samples. The wavelengths of the incident light were chosen to be 532, 700, 1000, and 1064 nm. Thereafter, the k-Wave simulations were executed, incorporating those fluence maps to generate the PA signals. The blood properties were obtained using the PA signals. We introduced variations in µ a, µ s, and g ranging from -10% to +10%, -10% to +10%, and -5% to +1%, respectively, at 700 and 1000 nm wavelengths. One parameter, at both wavelengths, was changed at a time, keeping others fixed. Subsequently, we examined how accurately the blood parameters could be determined at physiological hematocrit levels. A 10% variation in µ a induces a 10% change in H estimation but no change in S O 2 determination. Almost no change has been seen for µ s variation. However, a 5% (-5% to 0%) variation in the g factor resulted in approximately 160% and 115% changes in the PA signal amplitudes at 700 and 1000 nm, respectively, leading to ≈125% error in hematocrit estimation and ≈14% deviation in S O 2 assessment when nominal S O 2=70%. It is clear from this study that the scattering anisotropy factor is a very sensitive parameter and a small change in its value can result in large errors in the PA estimation of blood properties. In the future, in vitro experiments with pathological blood (inducing variation in the g parameter) will be performed, and accordingly, the accuracy of the PA technique in quantifying blood H and S O 2 will be evaluated.

Optical, thermal, mechanical, and antibacterial properties of polyvinyl alcohol/sodium alginate/ZnMn2O4 nanocomposites films for various optical devices and food packaging applications.

This work involves preparing zinc manganite nanoparticles (ZnMn2O4 NPs) using the Sol-gel method. Polymer nanocomposites of polyvinyl alcohol (PVA)/Sodium alginate (NaAlg)- ZnMn2O4 NPs were created using the solution casting technique. The polymer nanocomposites films were made with varying weight percentages of ZnMn2O4 nanoparticles. With the addition of nanofiller, the reduced direct and indirect energy band gap values and increased Urbach energy values were discovered in the UV-Vis data. XRD data showed a reduction in crystallinity degree with dopant. ZnMn2O4 NPs had a strong interaction with PVA/NaAlg blend, as confirmed by FTIR. The addition of ZnMn2O4 NPs led to improved thermal stability of the polymer nanocomposites films. Additionally, the nanocomposites films' mechanical characteristics were examined. The loading of ZnMn2O4 nanoparticles has been associated with an increasing trend in the mechanical properties of the nanocomposites, including its toughness, Young's modulus, Tensile strength (Ts), and elongation. The antibacterial activity of the nanocomposites against fungus and bacteria was studied. Additionally, PVA/NaAlg-ZnMn2O4 nanocomposites films had good antibacterial characteristics against environmental microorganisms such as Gram-positive (G+) S. aureus and Gram-negative(G-) E. coli bacteria as well as fungi C. albicans and A. niger. It was observed that the biodegradability of the nanocomposite films was lower compared to the pure PVA/NaAlg film. Compared to pure film, the water solubility was decreased upon the addition of ZnMn2O4 NPs. After ZnMn2O4 was added to the pure blend, the WVTR decreased. The produced polymer nanocomposites films appear to be a promising material for food packing, according to these results.

Fetal magnetocardiographic recordings with a prototype bed-based array system of optically-pumped magnetometers.

OBJECTIVE: To record and extract features of fetal cardiac activities with a semi-rigid prototype optically-pumped magnetometers (OPM) sensor array. METHODS: Fetal magnetocardiography (fMCG) data were collected from 15 pregnant women between 28 and 40 weeks gestation. Mothers were lying flat in a customized bed with sensors touching their abdomen from below using a prototype grid. fMCG was extracted to perform standard fetal heart rate variability (FHRV) analysis. RESULTS: fMCG was observed in 13 of the 15 pregnant women. OPM FHRV indicators were in the range of previous SQUID studies. CONCLUSION: Semi-rigid prototype OPM system has the ability to record quality fMCG. fMCG is capable of identifying lethal cardiac rhythm disturbances in the fetus. Our novel application of OPM technology may lower costs and increase maternal comfort, thus expanding fMCG's generalizability.

An FBG-based optical pressure sensor for the measurement of radial artery pulse pressure.

One of the diagnostic tool for clinical evaluation and disease diagnosis is a pulse waveform analysis. High fidelity radial artery pulse waveforms have been investigated in clinical research to compute central aortic pressure, which has been demonstrated to be predictive of cardiovascular diseases. The radial artery must be inspected from several angles in order to obtain the best pulse waveform for estimate and diagnosis. In this study, we present the design and experimental testing of an optical sensor based on Fiber Bragg Gratings (FBG). A 3D printed device along with the FBG is used to measure the radial artery pulses. The proposed sensor is used for the purpose of quantifying the radial artery pulse waveform across major pulse position point. The suggested optical sensing system can measure the pulse signal with good accuracy. The main characteristic parameters of the pulse can then be retrieved from the processed signal for their use in clinical applications. By conducting experiments under the direction of medical experts, the pulse signals are measured. In order to experimentally validate the sensor, we used it to detect the pulse waveforms at Guan position of the wrist's radial artery in accordance with the diagnostic standards. The findings show that combining optical technologies for physiological monitoring and radial artery pulse waveform monitoring using FBG in clinical applications are highly feasible.

The chemical and optical stability evaluation of injectable restorative materials under wet challenge.

OBJECTIVES: To investigate and compare the chemical and optical stability of four restorative composite materials: two injectable resins, one flowable resin and one compomer. METHODS: Two injectable nano-filled composite resins: G-aenial Universal (GU) and Beautifil Injectable XSL (BI), a flowable composite resin: Filtek Supreme Flowable (FS) and a compomer: Dyract Flow (DF), in A2 shade were tested and compared. Water sorption and solubility were conducted according to ISO4049:2019 standard; ICP-OES and F-ion selective electrode were used to test the elemental release; Degree of conversion (DC) was obtained by using FTIR; water contact angle was obtained by static sessile drop method, and a spectrophotometer was used for optical properties (ΔE⁎, ΔL⁎ and TP). SPSS 28.0 was used for statistical analysis and the significant level was pre-set as α = 0.05. RESULTS: GU performed the best in water sorption and solubility, FS had the lowest elemental release, the best colour stability, and the highest DCIM and DC24-h. DF, the compomer had the lowest, and GU and BI, the injectable composites had the largest water contact angle, respectively. Correlations were found between water sorption and water solubility. CONCLUSIONS: The four composite restorative materials showed different chemical and optical behaviours. Overall, composite resins performed better than compomer, while additional laboratory and in vivo tests are necessary to obtain a more comprehensive comparison between injectable and flowable composite resins. Wsp and Wsl are influenced by many common factors, and the values are highly positively related. CLINICAL SIGNIFICANCE: A comprehensive understanding of materials is crucial before selecting materials for clinical practice. Composite resins rather than compomers are recommended because of their exceptional properties, which make them eligible for a wide range of clinical applications and an elongated lifespan.

Impact of the sintering parameters on the grain size, crystal phases, translucency, biaxial flexural strength, and fracture load of zirconia materials.

OBJECTIVES: To investigate the influence of the zirconia and sintering parameters on the optical and mechanical properties. METHODS: Three zirconia materials (3/4Y-TZP, 4Y-TZP, 3Y-TZP) were high-speed (HSS), speed (SS) or conventionally (CS) sintered. Disc-shaped specimens nested in 4 vertical layers of the blank were examined for grain size (GS), crystal phases (c/t'/t/m-phase), translucency (T), and biaxial flexural strength. Fracture load (FL) of three-unit fixed dental prostheses was determined initially and after thermomechanical aging. Fracture types were classified, and data statistically analyzed. RESULTS: 4Y-TZP showed a higher amount of c + t'-phase and lower amount of t-phase, and higher optical and lower mechanical properties than 3Y-TZP. In all materials, T declined from Layer 1 to 4. 3/4Y-TZP showed the highest FL, followed by 3Y-TZP, while 4Y-TZP showed the lowest. In 4Y-TZP, the sintering parameters exercised a direct impact on GS and T, while mechanical properties were largely unaffected. The sintering parameters showed a varying influence on 3Y-TZP. Thermomechanical aging resulted in comparable or higher FL. CONCLUSION: 3/4Y-TZP presenting the highest FL underscores the principle of using strength-gradient multi-layer blanks to profit from high optical properties in the incisal area, while ensuring high mechanical properties in the lower areas subject to tensile forces. With all groups exceeding maximum bite forces, the examined three-unit FDPs showed promising long-term mechanical properties.

Optical crosstalk of protective cover on MPPC array for TOF PET detector.

Objective. Time-of-flight (TOF) is an important factor that directly affects the image quality of PET systems, and various attempts have been made to improve the coincidence resolving time (CRT) of PET detectors. For independent readout detectors, the timing is acquired for each silicon photomultiplier (SiPM), so they are less sensitive to diffused scintillation light, resulting in a better CRT. Further improvement can be expected if the light can be focused on a single SiPM. However, existing SiPM arrays have a thin protective cover on the SiPM and the gap between the SiPMs is filled with either air or the protective cover, so the light must diffuse through the cover. In this work, we investigated optical crosstalk in the protective cover to improve the CRT.Approach. We used 3.1 × 3.1 × 20 mm3fast LGSO crystals and 3 mm square 8 × 8 multi pixel photon counter (MPPC) arrays. Pitch of the MPPCs was 3.2 mm and thickness of the protective cover on them was 150µm. To reduce diffusion of scintillation light in the protective cover, the part of the inactive areas on the MPPC array were optically separated using reflective material. Specifically, 50, 100, 150, and 350µm deep grid-shaped slits were made along the inactive area of the MPPCs and they were filled with BaSO4powder as the reflective material.Main results. Coincidence counts were measured with a pair of TOF detectors, and the CRT was shorter with a deeper slit depth. The CRT before improvement was 235 ps, and using the cover having the 350µm deep slits filled with reflective material lowered the CRT to 211 ps.Significance. Up to 10% of the scintillation light was diffused to other MPPCs by the protective cover, and the CRT was degraded by 10% due to optical crosstalk of the cover. The proposed method promises to improve the CRT of the TOF detector.

Hybrid nanostructures of nitrogen-doped carbon dots and aromatic amino acids: Synthesis, interactions at interfaces and optical properties.

Nitrogen-doped carbon dots (NCD) were synthesized using a simple and fast hydrothermal route, employing citric acid and urea as precursors. The resulting NCDs were non-covalently functionalized (conjugated) with aromatic amino acids, namely phenylalanine (Phe) and tryptophan (Trp). Atomic force microscopy revealed that the NCDs exhibit a disk-like morphology with an average diameter of approximately 60 nm and an average height of about 0.5 nm. Following conjugation, the particle height increased to around 3 nm. UV-vis spectroscopy analysis indicated successful conjugation of the amino acids to the NCD nanostructures. Additionally, DFT numerical calculations based on three differently N-doped clusters were performed to elucidate the nature of the non-covalent interactions between NCDs and the corresponding amino acids. Photoluminescent spectra demonstrated a stable and strong fluorescence signal for both hybrids in the UV region. The most significant changes were observed in the case of Trp-conjugation. In contrast to phenylalanine, the non-covalent bonding of tryptophan to NCDs strongly influenced the visible emission (around 500 nm) originating from surface states of the dots.

A comparative study of analytical models of diffuse reflectance in homogeneous biological tissues: Gelatin-based phantoms and Monte Carlo experiments.

Information about tissue oxygen saturation (StO2) and other related important physiological parameters can be extracted from diffuse reflectance spectra measured through non-contact imaging. Three analytical optical reflectance models for homogeneous, semi-infinite, tissue have been proposed (Modified Beer-Lambert, Jacques 1999, Yudovsky 2009) but these have not been directly compared for tissue parameter extraction purposes. We compare these analytical models using Monte Carlo (MC) simulated diffuse reflectance spectra and controlled gelatin-based phantoms with measured diffuse reflectance spectra and known ground truth composition parameters. The Yudovsky model performed best against MC simulations and measured spectra of tissue phantoms in terms of goodness of fit and parameter extraction accuracy followed closely by Jacques' model. In this study, Yudovsky's model appeared most robust; however, our results demonstrated that both Yudovsky and Jacques models are suitable for modeling tissue that can be approximated as a single, homogeneous, semi-infinite slab.