Sustainable Production of Biosurfactant from Agro-Industrial Oil Wastes by Bacillus subtilis and Its Potential Application as Antioxidant and ACE Inhibitor.

The microbial conversion of agro-industrial oil wastes into biosurfactants shows promise as a biomass refinery approach. In this study, Bacillus subtilis #309 was applied to produce surfactin using rapeseed and sunflower cakes, the most common oil processing side products in Europe. Studies of the chemical composition of the substrates were performed, to determine the feasibility of oil cakes for surfactin production. Initially, screening of proteolytic and lipolytic activity was performed to establish the capability of B. subtilis #309 for substrate utilization and hence effective surfactin production. B. subtilis #309 showed both proteolytic and lipolytic activity. The process of surfactin production was carefully analyzed by measurement of the surfactin concentration, pH, surface tension (ST) and emulsification index (E24). The maximal surfactin concentration in the sunflower and rapeseed cake medium reached 1.19 ± 0.03 and 1.45 ± 0.09 g/L, respectively. At the same time, a progressive decrease in the surface tension and increase in emulsification activity were observed. The results confirmed the occurrence of various surfactin homologues, while the surfactin C15 was the dominant one. Finally, the analysis of surfactin biological function exhibited antioxidant activity and significant angiotensin-converting enzyme (ACE)-inhibitory activity. The half-maximal inhibitory concentration (IC50) value for ACE inhibition was found to be 0.62 mg/mL for surfactin. Molecular docking of the surfactin molecule to the ACE domains confirmed its inhibitory activity against ACE. Several interactions, such as hydrophobic terms, hydrogen bonds and van der Waals interactions, were involved in the complex stabilization. To the best of our knowledge, this is the first report describing the effect of a lipopeptide biosurfactant, surfactin, produced by B. subtilis for multifunctional properties in vitro, namely the ACE-inhibitory activity and the antioxidant properties, using different assays, such as 2,2-azinobis (3-ethyl-benzothiazoline-6-sulfonic acid (ABTS), 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric reducing antioxidant power (FRAP). Thus, the ACE-inhibitory lipopeptide biosurfactant shows promise to be used as a natural antihypertensive agent.

Impacts of empty fruit bunch applications on soil organic carbon in an industrial oil palm plantation.

Extensive oil palm plantations have often resulted in the decrease of soil organic carbon (SOC). Several options exist to counter this, such as recycling empty fruit bunches (EFB) as a soil amendment. However, the extent to which EFB increase SOC has been disputed. Since EFB could also be used as a climate change mitigation tool, it is necessary to truly understand their impact on SOC. The investigation of the impact of nine EFB treatments (differing in frequency and application rates) on a 27-year-old large-scale experiment (Lampung, Sumatra, Indonesia) revealed that, while EFB impacts are heterogeneous throughout the plantation, they can positively affect total SOC and permanganate oxidisable carbon (POX-C) both at shallow and deep depths (measured up to 100 cm). POX-C was closely correlated to SOC, but showed significant increases compared to the untreated control in all treatments, while total SOC was only increased in a few treatments with small and frequent rates of EFB application. Overall, between 12 (±16) and 56 (±12) t ha-1 of carbon were sequestered under the harvesting path after 21 years. Focussing on the mineral nutrition value of the EFB, oil palm companies apply a rate of 60 t of EFB every second year for their commercial production, and the analysis of three commercial plots showed that the commercial rate only increased POX-C while it had no effect on the total SOC and SOC stocks. It seems obvious that a change of paradigm is necessary to consider EFB recycling as a new management perspective, where the potential for carbon sequestration becomes an important variable for climate change mitigation besides the initial objective of integrating EFB application into the fertiliser management plan of a plantation.

Bacterial xanthan and ramnolipid simultaneous production using industrial oil produced water.

The present work aimed to give an economical destiny to the produced water, a residue generated by the oil and gas industry by means of producing bioactives such as xanthan gum and ramnolipid. These compounds are often used in combination during enhanced oil recovery strategies. On the other hand, reports on co-culture of bacterial strains that are responsible for their production are rare. This research shows a factorial design method associated with surface response analysis to optimize carbon sources, sucrose and crude glycerin, and fermentation agents for culturing Xanthomonas campestris and Pseudomonas aeruginosa using the described conditions. After the critical point validation resulting in xanthan and ramnolipid production of 8.69 and 4.80 g L-1, quality tests showed an apparent viscosity of 1006 cP with an emulsifying activity abouve 50% for 94 h.

End-stage renal disease and metalworking fluid exposure.

OBJECTIVE: Despite increasing prevalence of end-stage renal disease (ESRD), little attention has been directed to how occupational exposures may contribute to risk. Our objective was to investigate the relationship between metalworking fluids (MWF) and ESRD in a cohort of 36 703 male autoworkers. METHODS: We accounted for competing risk of death, using the subdistribution hazard approach to estimate subhazard ratios (sHRs) and 95% CIs in models with cubic splines for cumulative exposure to MWF (straight, soluble or synthetic). RESULTS: Based on 501 ESRD cases and 13 434 deaths, we did not observe an association between MWF and ESRD overall. We observed modest associations between MWF and ESRD classification of glomerulonephritis and diabetic nephropathy. For glomerulonephritis, the 60th percentile of straight MWF was associated with an 18% increased subhazard (sHR=1.18, 95% CI: 0.99 to 1.41). For diabetic nephropathy, the subhazard increased 28% at the 60th percentile of soluble MWF (sHR=1.28, 95% CI: 1.00 to 1.64). Differences by race suggest that black males may have higher disease rates following MWF exposure. CONCLUSIONS: Exposure to straight and soluble MWF may be related to ESRD classification, though this relationship should be further examined.

Characterization and comparison of commercial oils used for human embryo culture.

STUDY QUESTION: Are there significant differences between the available commercial oil brands used for human IVF? SUMMARY ANSWER: Important differences have been detected among the tested oil brands in their potential to stabilize culture conditions and, more importantly, in their direct effect on embryo development and viability. WHAT IS KNOWN ALREADY: Mineral oil is a critical component of the human culture system due to its protective and stabilizing roles during in vitro embryo development. Many different oils are available on the market, with differences in their viscosity, density and overall quality. STUDY DESIGN, SIZE, DURATION: Thirteen different commercial oil brands were compared. PARTICIPANTS/MATERIALS, SETTING, METHODS: Each oil was firstly analyzed to assess its viscosity, density, peroxide value and potential oxidation. Secondly, the capacity of each oil to reduce pH, osmolality and temperature fluctuations during embryo culture and manipulation was compared. Lastly, a sensitive mouse embryo assay (MEA) protocol, previously optimized to detect toxicity in oils samples, was used to compare the overall quality of the different brands in terms of embryo developmental rates up to the blastocyst stage. At the end of the MEAs, a triple labeling protocol was applied to analyze Oct4+ cells, apoptotic cells and total cell counts in the blastocysts obtained by fluorescence microscopy. MAIN RESULTS AND THE ROLE OF CHANCE: Significant divergences were detected in the rise of osmolality and the equilibration and stability of pH between different oils, which could be correlated to their physico-chemical characteristics. In particular, oil samples with a higher viscosity tended to offer an additional protection against fluctuations in the culture conditions, however, the differences in temperature stability between oils were minor. Two out of the 13 oil samples, which were commercially available, were identified as embryo-toxic by applying the MEA protocol with increased sensitivity for toxicity detection. Additionally, substantial differences in the total number of cells and the number of cells in the inner cell mass of the obtained blastocysts were also detected between oil groups. LIMITATIONS, REASONS FOR CAUTION: A single lot of oil was used for each brand and, thus, lot-to-lot variations in oil quality could not be determined. However, several bottles from the same oil were included to account for potential intra-lot variability. WIDER IMPLICATIONS OF THE FINDINGS: Commercial oils differ in both their physical characteristics and their performance in maintaining the stability of the culture conditions during in vitro embryo culture. Oil selection is important for embryo culture success. Additionally, the detection of embryo-toxic oils which had already been released to the human IVF market showcases the importance of applying sensitive MEA protocols for a better detection of toxicity in this type of samples. STUDY FUNDING/COMPETING INTEREST(S): This study was privately funded. TRIAL REGISTRATION NUMBER: N/A.

The Influence of UV Varnishes on the Content of Cysteine and Methionine in Women Nail Plates-Chromatographic Studies.

The main purpose of this work was to determine if the use of hybrid nail polishes causes changes in concentration of the most important sulfur amino acids that build nail plate structures, cysteine and methionine. We found that the average contents of cysteine and methionine in studied samples before the use of hybrid manicure were 1275.3 ± 145.9 nmol mg-1 and 111.7 ± 23.8 nmol mg-1, respectively. After six months of hybrid manicure use, the average amount of these sulfur amino acids in studied samples were 22.1% and 36.5% lower in the case of cysteine and methionine, respectively. The average amounts of cysteine and methionine in nail plate samples after the use of hybrid manicures were 992.4 ± 96.2 nmol mg-1 and 70.9 ± 14.8 nmol mg-1, respectively. We also confirmed that in studied women the application of UV light varnishes reduced the thickness of the nail plate, from 0.50 ± 0.12 mm before to 0.46 ± 0.12 mm after the use of the hybrid manicure.

Optimization of low-cost biosurfactant produced by Bacillus subtilis SASCBT01 and their environmental remediation potential.

The present research aims to enhance the biosurfactant (BS) production using agricultural by-products as a low-cost substrate with the statistical approach. BS production from Bacillus subtilis SASCBT01 was carried out with four different variables such as pH, incubation time, cassava peel waste (CPW) and palmira sprout (PS). The model expected the highest emulsification activity of 65 ± 1·2% after 96-h incubation with 3·0 g l-1 of CPW and PS at pH 7·0. The SASCBT01 strain-based BS was successful at retrieving up to 18% and the highest Pb removal rates were found at 65%. These BS have considered high quality in bioremediation applications.

Evaluating Quality Parameters, the Metabolic Profile, and Other Typical Features of Selected Commercial Extra Virgin Olive Oils from Brazil.

The production of extra virgin olive oil (EVOO) in Brazil developed quite recently, and information on commercial Brazilian EVOO's typical features is very scarce. In just one of the previously published works on Brazilian olive oil, the assessed samples were commercially available. In this study, a comprehensive characterization of EVOO samples acquired at local stores (at Rio de Janeiro and Rio Grande do Sul, from the two most prevalent cultivars, Arbequina and Koroneiki) was carried out considering the most relevant quality parameters, antioxidant capacity, oxidative stability, total phenolic content, fatty acid composition, and minor component metabolic profiling. The latter included: (1) the determination of individual phenolic compounds (belonging to four diverse chemical classes) and triterpenic acids by means of a powerful multi-class reversed-phase LC-MS method; (2) the quantitative profiling of tocopherols, phytosterols, and pigments by normal-phase LC-DAD/fluorescence; and (3) the quantitative appraisal of the volatile pattern of the oils by solid-phase microextraction (SPME)-gas chromatography (GC)-MS. By applying these methods, the concentrations of approximately 70 minor compounds were determined in commercial EVOOs from Brazil. To the best of our knowledge, the content of a very large number of phenolic compounds of those determined in the current report (mainly secoiridoids), the three triterpenic acids (maslinic, betulinic, and oleanolic acids), and the individual chlorophyll derivatives had not been previously evaluated in Brazilian EVOOs. The present work provides a broad picture of the compositional profile and other parameters of relevance of selected commercial Brazilian EVOOs available on local markets, describing their typicity and most particular features, some of which are known to have potential impacts on consumers' health.

Contact sensitization in metalworkers: Data from the information network of departments of dermatology (IVDK), 2010-2018.

BACKGROUND: Metalworkers are exposed to a variety of contact allergens by handling tools, metals, metalworking fluids (MWFs), oils and greases, rubber materials, and so on. Most large-scale reports on contact allergy due to MWFs are more than 10-years-old, and there are only few studies on contact allergy in mechanics and other metal workers not exposed to MWFs. OBJECTIVES: To describe a current spectrum of contact sensitization in metalworkers with occupational dermatitis (OD). PATIENTS AND METHODS: Retrospective analysis of patch test data collected by the Information Network of Departments of Dermatology (IVDK; 2010-2018), stratifying for 804 cutting metalworkers, 2197 mechanics, and 355 other metalworkers. RESULTS: Cutting metalworkers were most frequently sensitized to monoethanolamine (12.6%), colophonium/abietic acid (11.4%) and formaldehyde releasers (up to 8.5%) from the MWF series, and formaldehyde (4.6%) and iodopropynyl butylcarbamate (4.6%) from the baseline series. Sensitization among mechanics and other metalworkers indicates possible occupational exposure to MWFs, glues, and resins, although this may not be expected from their job titles. CONCLUSIONS: The spectrum of MWF contact allergens remained largely unchanged during the last years. Taking a comprehensive occupational history is indispensable in order to not miss relevant allergen exposures.

Metalworking fluids and cancer mortality in a US autoworker cohort (1941-2015).

Objectives This report describes the extended follow-up (1941-2015) of a cohort of 38 549 automobile manufacturing workers with potential exposure to metalworking fluids (MWF). The outcomes of interest were mortality from cancers of the esophagus, stomach, intestine, rectum, bladder, liver, pancreas, larynx, lung, skin, prostate, brain, and female breast, as well as leukemia. This report includes 5472 deaths from cancer, more than ten times the numbers of deaths in our last summary report published 20 years ago. Methods Standardized mortality ratios were computed for the entire study period. Adjusted hazard ratios (HR) were estimated in Cox proportional hazard models with categorical variables for cumulative exposure to each type of MWF. Results Exposure-response patterns are consistent with prior mortality reports from this cohort. We found increased risk of skin and female breast cancer with straight fluids. For the first time, we found elevated risk of stomach cancer mortality. Overall, many of the exposure-response results did not suggest an association with MWF. Conclusions Mortality is a poor proxy for cancer diagnosis for treatable cancers and not the optimal outcome measure in etiological studies. Although the HR presented here handle bias from the healthy worker hire effect and left truncation, they do not handle bias from healthy worker survivor effect, which likely results in underestimates of the health impacts of MWF. Although this updated summary provides some information on the risk of cancer from MWF, targeted future analyses will help clarify associations.

Comparison of the performance of prepared pristine and TiO2 coated UF/NF membranes for two types of oil-in-water emulsion separation.

Polysulfone ultrafiltration (UF) and polypiperazine-amide nanofiltration (NF) membranes were first fabricated by phase inversion and interfacial polymerization, and then modified by the commonly used TiO2 on the membrane surface, respectively. Compared with the pristine UF and NF membranes, pure water flux decreased by 40.66% for modified UF membrane and 12.92% for modified NF membrane, while the contact angle of the modified membranes decreased from 66.5° to 35.3° for UF membrane and from 48.2° to37.7° for NF membrane. However, the membrane modified by TiO2 nanoparticles for both UF and NF membranes exhibited much better anti-fouling and separation performance for two types of oil-in-water emulsions with different droplet size (i.e., prepared oil-in-water emulsion with low salinity and oil produced water in Shengli oilfield, China). It was obvious that water flux of modified UF only slightly decreased and the stable water flux was 2.2 times and 15.6% higher than that of pristine membranes for the prepared oil-in-water emulsion and produced water, respectively. According to the five fouling models for UF, the TiO2 modified UF membrane could alleviate the fouling on membrane surface and greatly increase water flux by reducing the adsorption, deposition, blockage of membrane pores and formation of cake layer for two types of oil-in-water emulsion. For NF, water flux of the modified membrane increased by 66.1% and 22.8% for prepared oil-in-water emulsion and produced water, respectively. TiO2 coating effectively alleviated the oil adhesion and cake layer formation on the membrane surface.

Investigating the risk of breast cancer among women exposed to chemicals: a nested case-control study using improved exposure estimates.

PURPOSE: The aim of this study was to examine if exposures to chemicals at the workplace were associated with an increased risk of postmenopausal breast cancer, using improved exposure estimates. METHODS: The design is a case-control study, nested within a cohort of women from the Malmö Diet and Cancer Study. The study comprised 2400 women, 731 cases and 1669 matched controls, born 1923-1950 and living in Malmö, Sweden between 1991 and 1996. An occupational hygienist reclassified the probability for exposure given by a job-exposure matrix, using individual data on work tasks. First-time diagnoses of invasive breast cancer were identified through the Swedish Cancer Registry. RESULTS: Women exposed to chemicals in their occupational environment had a statistically significantly increased risk (OR 1.59, 95% CI 1.11-2.29) of breast cancer, and the risk correlated positively with duration of exposure but not with exposure intensity. Women exposed to chlorinated hydrocarbon solvents for more than 10 years had a significant higher risk of breast cancer (OR 3.06, 95% CI 1.18-7.96) as well as women exposed to oil mist for more than 10 years (OR 3.08, 95% CI 1.12-8.49). CONCLUSIONS: This study gives some support to the hypothesis that exposure to organic solvents as well as oil mist is associated with increased risk of breast cancer.

Hypersensitivity pneumonitis in a cystic fibrosis patient.

Hypersensitivity pneumonitis (HP) is a chronic inflammatory lung disease caused by repeated inhalation of antigenic substances. We present a case of metalworking fluids (MWFs)-HP sensitized to Pseudomonas oleovorans in a cystic fibrosis patient. This case illustrates that HP diagnosis remains challenging, especially in patients with another pulmonary disease, and that serodiagnosis contributes to identifying the precise microorganism involved. It also demonstrates that P. oleovorans is an important secondary aetiological agent in MWF-HP, less known than Mycobacterium immunogenum.

Cleaning workers' exposure to volatile organic compounds and particulate matter during floor polish removal and reapplication.

The floor polish removal (FPR) and reapplication (FPA) are important cleaning tasks in public buildings that have hard floor surfaces. Usually, the FPR and FPA are conducted once or twice a year, during the periodic cleaning of these buildings. The FPR can be performed either chemically (CFPR) or by using dry scrubber (DFPR), when the polish is ground from the floor. In this study, cleaning workers' exposure to volatile organic compounds (VOCs) and particulate matter (PM) during the FPR and FPA, and the differences in the exposures between the two FPR methods were investigated. In total, three buildings located in Central Finland were included, and total of six cleaning workers (two per building) participated in the study. In Buildings 1 and 2, the CFPR and FPA were performed and in Building 3, the DFPR was conducted. TVOC (total volatile organic compounds) concentrations in the breathing zone of the workers during the CFPR were 8,740 and 390 µg/m3 (SD 3,290 and 180 µg/m3) for Buildings 1 and 2, respectively. During the DFPR in Building 3, the average TVOC concentration was 400 µg/m3 (SD 180 µg/m3, stationary sampling). The TVOC concentrations during the FPA were high, 1,640 and 2,170 µg/m3 on average (SD 1,570 and 930 µg/m3) for Buildings 1 and 2, respectively. Glycol ethers were the most prominent VOCs during the CFPR and FPA, whereas carboxylic acids were the most common during the DFPR. The inhalable dust concentrations in the workers' breathing zone were noticeably higher during the DFPR (1.55 mg/m3 on average, SD 0.01 mg/m3) than the CFPR (0.24 mg/m3 on average, SD 0.05 mg/m3). Finnish occupational exposure limit value for organic inhalable dust is 5 mg/m3. As the products used during the CFPR and FPA contain glycol ethers and ethanolamines that are absorbed via the skin as well, the use of skin protection is recommended. Whereas the use of FFP3 respirators and skin protection are recommended during the DFPR to prevent the PM exposure.

Transcriptome analysis of activated sludge microbiomes reveals an unexpected role of minority nitrifiers in carbon metabolism.

Although metagenomics researches have illuminated microbial diversity in numerous biospheres, understanding individual microbial functions is yet difficult due to the complexity of ecosystems. To address this issue, we applied a metagenome-independent, de novo assembly-based metatranscriptomics to a complex microbiome, activated sludge, which has been used for wastewater treatment for over a century. Even though two bioreactors were operated under the same conditions, their performances differed from each other with unknown causes. Metatranscriptome profiles in high- and low-performance reactors demonstrated that denitrifiers contributed to the anaerobic degradation of heavy oil; however, no marked difference in the gene expression was found. Instead, gene expression-based nitrification activities that fueled the denitrifiers by providing the respiratory substrate were notably high in the high-performance reactor only. Nitrifiers-small minorities with relative abundances of <0.25%-governed the heavy-oil degradation performances of the reactors, unveiling an unexpected linkage of carbon- and nitrogen-metabolisms of the complex microbiome.

Development of Industrial Oil Crop Crambe abyssinica for Wax Ester Production through Metabolic Engineering and Cross Breeding.

As an important industrial feedstock, wax esters (WEs) have been used as lubricants in a number of technical processes. There is however currently no large-scale biological source for WE production and alteration in metabolic pathways of plant oils for producing WEs could be attractive to the commercial markets. Here, we present the breeding results of long-term studies on successful development of new crambe lines producing WEs through genetic engineering and cross breeding. The transgenic crambe lines producing WEs at over 25% of the total seed oil were first generated by introduction of the jojoba WE biosynthetic genes ScFAR and ScWS. Further improvement of the lines aiming at improving oxidative stability of WEs was achieved through introducing the CaFAD2-RNAi gene into these lines by crossing. The hybrid lines possessed similar agronomic traits to the wild type and a stable level of WEs over several generations, suggesting a high potential of crambe as an industrial crop for WE production.

Maternal Occupational Oil Mist Exposure and Birth Defects, National Birth Defects Prevention Study, 1997⁻2011.

Workers in various industries can be exposed to oil mists when oil-based fluids are aerosolized during work processes. Oil mists can be inhaled or deposited on the skin. Little research exists on the reproductive effects of oil mist exposure in pregnant workers. We aimed to investigate associations between occupational oil mist exposure in early pregnancy and a spectrum of birth defects using data from 22,011 case mothers and 8140 control mothers in the National Birth Defects Prevention Study. In total, 150 mothers were rated as exposed. Manufacturing jobs, particularly apparel manufacturing, comprised the largest groups of exposed mothers. Mothers of infants with septal heart defects (odds ratio (OR): 1.8, 95% confidence interval (CI): 1.0-3.3), and especially perimembranous ventricular septal defects (OR: 2.5, CI: 1.2-5.2), were more likely to be occupationally exposed to oil mists in early pregnancy than control mothers; and their rater-estimated cumulative exposure was more likely to be higher. This was the first U.S. study evaluating associations between oil mist exposure and a broad spectrum of birth defects. Our results are consistent with previous European studies, supporting a potential association between oil-based exposures and congenital heart defects. Further research is needed to evaluate the reproductive effects of occupational oil mist exposure.