Examination of primary aromatic amines content in polylactic acid straws and migration into food simulants using SERS with LC-MS.

Polylactic acid (PLA) straws hold eco-friendly potential; however, residual diisocyanates used to enhance the mechanical strength can generate carcinogenic primary aromatic amines (PAAs), posing health risks. Herein, we present a rapid, comprehensive strategy to detecting PAAs in 18 brands of food-grade PLA straws and assessing their migration into diverse food simulants. Surface-enhanced Raman spectroscopy was conducted to rapidly screen straws for PAAs. Subsequently, qualitative determination of migrating PAAs into various food simulants (4 % acetic acid, 10 % ethanol, 50 % ethanol) occurred at 70 °C for 2 h using liquid chromatography-mass spectrometry. Three PAAs including 4,4'-methylenedianiline, 2,4'-methylenedianiline, and 2,4-diaminotoluene were detected in all straws. Specifically, 2,4-diaminotoluene in 50 % ethanol exceeded specific migration limit of 2 µg/kg, raising safety concerns. Notably, PAAs migration to 10 % and 50 % ethanol surpassed that to 4 % acetic acid within a short 2-hour period. Moreover, PLA straws underwent varying degrees of shape changes before and after migration. Straws with poly(butylene succinate) resisted deformation compared to those without, indicating enhanced heat resistance, while poly(butyleneadipate-co-terephthalate) improved hydrolysis resistance. Importantly, swelling study unveiled swelling effect wasn't the primary factor contributing to the increased PAAs migration in ethanol food simulant, as there was no significant disparity in swelling degrees across different food simulants. FT-IR and DSC analysis revealed higher PAAs content in 50 % ethanol were due to highly concentrated polar ethanol disrupting hydrogen bonds and van der Waal forces holding PLA molecules together. Overall, minimizing contact between PLA straws and alcoholic foods is crucial to avoid potential safety risks posed by PAAs.

Deciphering the complexity of the chemicals in food packaging materials using molecular networks.

Chemicals from packaging materials might be transferred into food resulting in consumer exposure. Identifying these migrated chemicals is highly challenging and crucial to perform their safety assessment, usually starting by the understanding of the chemical composition of the packaging material itself. This study explores the use of the Molecular Networking (MN) approach to support identification of the extracted chemicals. Two formulations of bioplastics were analyzed using Liquid Chromatography hyphenated to High-Resolution Mass Spectrometry. Data processing and interpretation using a conventional manual method was performed as a point of comparison to understand the power of MN. Interestingly, only the MN approach facilitated the identification of unknown chemicals belonging to a novel oligomer series containing the azelaic acid monomer. The MN approach provided a faster visualization of chemical families in addition to the highlight of unrelated chemicals enabling to prioritize chemicals for further investigation improving the safety assessment of packaging materials.

Development and antimicrobial activity of composite edible films of chitosan and nisin incorporated with perilla essential oil-glycerol monolaurate emulsions.

Aquatic products are highly susceptible to spoilage, and preparing composite edible film with essential oil is an effective solution. In this study, composite edible films were prepared using perilla essential oil (PEO)-glycerol monolaurate emulsions incorporated with chitosan and nisin, and the film formulation was optimized by response surface methodology. These films were applied to ready-to-eat fish balls and evaluated over a period of 12 days. The films with the highest inhibition rate against Staphylococcus aureus were acquired using a polymer composition of 6 µL/mL PEO, 18.4 µg/mL glycerol monolaurate, 14.2 mg/mL chitosan, and 11.0 µg/mL nisin. The fish balls coated with the optimal edible film showed minimal changes in appearance during storage and significantly reduced total bacterial counts and total volatile basic nitrogen compared to the control groups. This work indicated that the composite edible films containing essential oils possess ideal properties as antimicrobial packaging materials for aquatic foods.

Development and characterization of a double-layer smart packaging system consisting of polyvinyl alcohol electrospun nanofibers and gelatin film for fish fillet.

This study aimed to develop a double-layer film composed of an intelligent, gelatin-based film integrated with active polyvinyl alcohol electrospun nanofibers (PVANFs). Eggplant skin extract (ESE), a colorimetric indicator, was incorporated into the gelatin-based film at varying concentrations ranging from 0 % to 8 % w/w. The gelatin film containing 8 % ESE was identified as the optimal formulation based on its superior color indication, water barrier, and mechanical properties. Savory essential oil (SEO)-loaded PVANFs were electrospun onto the optimized gelatin film to fabricate the double-layer film. Analysis of the chemical and crystalline structures and the double-layer film's thermal properties confirmed the gelatin film's physical integration with PVANFs. Morphological examination revealed a smooth surface on the film and a uniform fibrillar structure within the PVANFs. Furthermore, the developed double-layer film effectively detected spoilage in trout fish while controlling pH, oxidation, and microbial changes during storage.

A novel gelatin composite film with melt extrusion for walnut oil packaging.

Gelatin have excellent film-forming and barrier properties, but its lack of biological activity limits its application in packaging. In this study, fish gelatin incorporated with apple polyphenol/cumin essential oil composite films were successfully prepared by melt extrusion. The cross-linking existed in gelatin and apple polyphenol improved the thermal stability and oxidation resistance of the film. The synergistic effect of apple polyphenols and cumin essential oil decreased the sensitivity of the film to water, especially the water solubility decreased from 41.60 % to 26.07 %. The plasticization of essential oil nearly doubled the elongation at break while maintaining the tensile strength of the film (11.45 MPa). Furthermore, the FG-CEO-AP film can inhibit peroxide value to extend the shelf life about 20 days in the walnut oil preservation. In summary, the apple polyphenol/cumin essential oil of FG film exhibits excellent comprehensive properties and high preparation efficiency for utilization as an active packaging material.

Hora da dica: recipientes adequados para a conservação e o aquecimento da marmita saudável

Unveiling the emerging trends of egg components-based biodegradable food packaging development: A comprehensive review.

Food packaging plays a crucial role in the food supply chain by aiding in food preservation and reducing food losses throughout the distribution process. The extensive, unregulated utilization, and waste mismanagement of food packaging materials made up of conventional petroleum-based plastics has led to a significant environmental crisis. Egg components-based food packaging has attracted considerable attention from the global packaging industry as a viable alternative to synthetic polymers due to its biodegradability, sustainability, and health-related benefits. This comprehensive review explores the composition and properties of egg components (eggshell, eggshell membrane, egg white, and egg yolk), and recent advancements in biodegradable packaging films derived from them. Additionally, it introduces the characteristics of these films and their applications in food, highlighting their biodegradability, sustainability, and suitable mechanical, barrier, thermal, optical, antioxidant, and antimicrobial properties as substitutes for traditional synthetic polymers. The utilization of various egg components in the packaging industry is a safe, non-toxic, cost-effective, and economical approach. However, it was found that incorporating active compounds from natural sources into packaging films, as well as composite films composed of egg components combined with other biopolymers, resulted in superior properties, compared to single component films. Moreover, the application of novel technologies in film development has proven to be more effective than conventional methods. These innovative egg components-based packaging films can be optimized and commercialized for use as packaging materials for food products.

Microbial composition of spoiled irradiated ready-to-eat chicken feet and their spoilage characteristics.

The spoilage of irradiated ready-to-eat chicken feet (RTECF) seriously affects the food's quality, resulting in package swelling and off-flavors, both of which are highly undesirable to stakeholders and consumers. To investigate the spoilage characteristics of irradiated RTECF and the microorganisms responsible for the spoilage and swelling, the changes in physicochemical properties, microbial community, and volatile organic compounds (VOCs) between normal and spoiled RTECF were evaluated. Compared with normal samples, the spoiled RTECF showed a higher pH value and total volatile basic nitrogen (TVB-N) value, lower color value, and texture features (P < 0.05). Acinetobacter, Pseudomonas, Lactobacillus, and Candida were the dominant genera responsible for RTECF spoilage as confirmed through both culture-dependent methods and high-throughput sequencing (HTS). The results of the verification for gas-producing strains showed that Lactobacillus brevis could cause RTECF packaging to swell. A total of 20 key VOCs were identified using headspace solid-phase microextraction combined with gas chromatography-mass spectrometry (HS-SPME-GC-MS). The results of Pearson correlation analysis (|r|>0.8, P < 0.05) showed that 12 dominant core microbial genera had a significant effect on the flavor of RTECF before and after spoilage. This study provides a theoretical reference for solving the problem of RTECF spoilage and improving the overall quality of RTECF products.

Advances in agar-based composites: A comprehensive review.

This review article explores the developments and applications in agar-based composites (ABCs), emphasizing various constituents such as metals, clay/ceramic, graphene, and polymers across diversified fields like wastewater treatment, drug delivery, food packaging, the energy sector, biomedical engineering, bioplastics, agriculture, and cosmetics. The focus is on agar as a sustainable and versatile biodegradable polysaccharide, highlighting research that has advanced the technology of ABCs. A bibliometric analysis is conducted using the Web of Science database, covering publications from January 2020 to March 2024, processed through VOSviewer Software Version 1.6.2. This analysis assesses evolving trends and scopes in the literature, visualizing co-words and themes that underscore the growing importance and potential of ABCs in various applications. This review paper contributes by showcasing the existing state-of-the-art knowledge and motivating further development in this promising field.

Carboxymethyl cellulose-chitosan edible films for food packaging: A review of recent advances.

Polysaccharide-based edible films have been widely developed as food packaging materials in response to the rising environmental concerns caused by the extensive use of plastic packaging. In recent years, the integration of carboxymethyl cellulose (CMC) and chitosan (CS) for a binary edible film has received considerable interest because this binary edible film can retain the advantages of both constituents (e.g., the great oxygen barrier ability of CMC and moderate antimicrobial activity of CS) while mitigating their respective disadvantages (e.g., the low water resistance of CMC and poor mechanical strength of CS). This review aims to present the latest advancements in CMC-CS edible films. The preparation methods and properties of CMC-CS edible films are comprehensively introduced. Potential additives and technologies utilized to enhance the properties are discussed. The applications of CMC-CS edible films on food products are summarized. Literature shows that the current preparation methods for CMC-CS edible film are solvent-casting (main) and thermo-mechanical methods. The CMC-CS binary films have superior properties compared to films made from a single constituent. Moreover, some properties, such as physical strength, antibacterial ability, and antioxidant activity, can be greatly enhanced via the incorporation of some bioactive substances (e.g. essential oils and nanomaterials). To date, several applications of CMC-CS edible films in vegetables, fruits, dry foods, dairy products, and meats have been studied. Overall, CMC-CS edible films are highly promising as food packaging materials.

Fabrication of edible nanocellulose chitosan bi-component film based on a novel "swell-permeate" approach.

The fabrication of multi-component film with colloidal particles could be inconvenient. A novel "swell-permeate" (SP) strategy was proposed to form homogeneous multi-component films. The SP strategy allows colloidal particles to fit into the polymer network by stretching the polymer chains assisted by water. We demonstrated the strategy by creating films with polysaccharide substrates as ß-cyclodextrin grafted chitosan (CS) with nanocellulose. The addition of nanocellulose significantly increased the mechanical properties and the barrier performance of the films. The size of nanocellulose particles in affecting mechanical properties was investigated by applying different length of cellulose nanocrystal (CNC), the longer of which, due to denser physical entanglements, showed a better increase to the film in the elastic modulus and tensile strength to 4.54-fold and 5.71-fold, respectively. The films were also loaded with ethyl-p-coumarate (EpCA) and had an enhanced performance in anti-microbial for Altenaria alternata, Salmonella typhi, and Escherichia coli. The anti-oxidative property was increased as well, and both effects were valid both in vitro and in ready-to-eat apples. The strategy provides a practical and convenient method for fabricating colloidal particle containing films, and the novel idea of "swell-permeate" is potentially regarded as a new solution to the challenge of ready-to-eat food quality maintenance.

Recent approaches in the application of antimicrobial peptides in food preservation.

Antimicrobial peptides (AMPs) are small peptides existing in nature as an important part of the innate immune system in various organisms. Notably, the AMPs exhibit inhibitory effects against a wide spectrum of pathogens, showcasing potential applications in different fields such as food, agriculture, medicine. This review explores the application of AMPs in the food industry, emphasizing their crucial role in enhancing the safety and shelf life of food and how they offer a viable substitute for chemical preservatives with their biocompatible and natural attributes. It provides an overview of the recent advancements, ranging from conventional approaches of using natural AMPs derived from bacteria or other sources to the biocomputational design and usage of synthetic AMPs for food preservation. Recent innovations such as structural modifications of AMPs to improve safety and suitability as food preservatives have been discussed. Furthermore, the active packaging and creative fabrication strategies such as nano-formulation, biopolymeric peptides and casting films, for optimizing the efficacy and stability of these peptides in food systems are summarized. The overall focus is on the spectrum of applications, with special attention to potential challenges in the usage of AMPs in the food industry and strategies for their mitigation.

Trends in the healthiness and nutrient composition of packaged products sold by major food and beverage companies in New Zealand 2015 to 2019.

BACKGROUND: Dietary risk factors are the leading cause of death globally and in New Zealand (NZ). Processed packaged foods are prevalent in the food supply and contribute excess amounts of sodium, saturated fat, and sugar in diets. Improving the nutritional quality of these foods has the potential to reduce population chronic disease risk. We aimed to evaluate the healthiness using the Australasian Health Star Rating (HSR, from 0.5 to 5 stars, with 5 being the healthiest) and nutrient composition (sodium, saturated fat, and total sugar) of packaged products manufactured by the largest NZ-based food and beverage companies in NZ 2015-2019. This analysis relates to a larger study evaluating structured engagement with food companies to improve nutrition-related policies and actions. METHODS: Data was sourced from Nutritrack, a NZ-branded supermarket-sourced food composition database. The largest NZ-based companies from annual retail sales revenue (n = 35) were identified using 2019 Euromonitor data. All relevant products of the selected companies were extracted for analysis. Products included totalled 17,795 with a yearly range of 3462-3672 products. The primary outcome was a nutrient profile score estimated using HSR. Healthiness was defined as ≥ 3.5 stars. Secondary outcomes were sodium, total sugar, and saturated fat per 100 g/100 mL. All outcomes were assessed overall, by food company, and food category. Change over time was tested using linear mixed models, adjusting for major food categories and cluster effects of food companies controlling for multiple comparisons. Model-adjusted mean differences between years were estimated with 95% confidence intervals. RESULTS: There was a small statistically significant increase in mean HSR between 2015 and 2019 (0.08 [0.15,0.01], p = 0.024). Mean total sugar content decreased over the same period (0.78 g/100 g [0.08,1.47], p = 0.020), but there were no significant changes in mean sodium or saturated fat contents. Seven of the 13 categories showed small increases in mean HSR (0.1-0.2). Most categories (9/13) exhibited a reduction in mean total sugar content. CONCLUSIONS: Between 2015 and 2019, there were slight improvements in the nutritional quality of selected packaged foods and drinks in NZ. Much more substantive changes are needed to address the health-related burden of unhealthy diets, supported by stronger government action and less reliance on voluntary industry initiatives.

Yeast polysaccharides: The environmentally friendly polysaccharides with broad application potentials.

Yeast cell wall (YCW) polysaccharides, including ß-glucans, mannans, chitins, and glycogens, can be extracted from the waste of beer industry. They are environmentally friendly, abundant, inexpensive raw materials, and have shown broad biological activities and application potentials. The exploitation of yeast polysaccharides is of great importance for environmental protection and resource utilization. This paper reviews the structural features and preparation of YCW polysaccharides. The solubility and emulsification of yeast polysaccharides and the properties of binding metal ions are presented. In addition, biological activities such as blood glucose and lipid lowering, immune regulation, antioxidant, promotion of intestinal health, and promotion of wound healing are proposed, highlighting the beneficial effects of yeast polysaccharides on human health. Through modification, the physical and chemical properties of yeast polysaccharides are changed, which emphasizes the promotion of their biological activities and properties. In addition, the food applications of yeast polysaccharides, including the food packaging film, emulsifier, thickening agent, and fat alternatives, are focused and discussed.

Preparation and properties of PCL coaxial electrospinning films with shell loaded with CEO and core coated LEO nanoemulsions.

During storage and transportation, the reduction of microbial contamination and management of the exudation of fluids from the fish can effectively mitigate spoilage and degradation of fish fillets. In this work, the coaxial electrospinning films loaded with natural plant preservatives, namely laurel essential oil (LEO) and clove essential oil (CEO), were prepared by the coaxial electrospinning method synergistic with nanoemulsion techniques, and the hydrophilic preservation pads were prepared. The morphology of the film fiber is clear, without beads or damage, with fiber diameters falling within the 230-260 nm range. It has a distinct core-shell structure, exceptional thermal stability, and strong antibacterial and antioxidant properties. The core-shell structure of the fiber subtly regulates the release of preservatives and significantly improves the utilization efficiency. At the same time, the synergistic use of two essential oils can reduce the amount while amplifying their effectiveness. The pads significantly slowed down the increase of key indicators of spoilage, such as total viable count (TVC), pH, thiobarbituric acid reactive substances (TBA), and total volatile base nitrogen (TVB-N), during the storage of the fish fillets. Furthermore, the pads effectively slowed down the decline in water-holding capacity, the deterioration of textural qualities, and the negative changes in the microstructure of the fish muscle. Ultimately, the pads notably delayed the spoilage of fish fillets, extending their shelf life from 5 d to 9 d. The efficient utilization of biological preservatives in this film can provide technical support for the development of food preservation materials.

Modified Chitosan-Based Coating/Packaging Composites with Enhanced Antibacterial, Antioxidant, and UV-Resistant Properties for Fresh Food Preservation.

Chitosan-based biomass packaging materials are a promising material for food preservation, but their limited solubility, antioxidant capacity, UV resistance, and mechanical properties severely restrict their application. In this study, we developed a novel chitosan-based coating/packaging composite (QCTO) using quaternary ammonium salt and tannic acid (TA)-modified chitosan (QCS-TA) and oxidized chitosan (OCS). The introduction of quaternary ammonium salt and TA effectively improves the water solubility and antibacterial, antioxidant, and UV-resistant properties of chitosan. The Schiff-base bond formed between OCS and QCS-TA, along with the TA-mediated multiple interactions, conferred the prepared composite film with good mechanical properties (69.9 MPa tensile strength) and gas barrier performance to water (14.3 g·h-1·m-2) and oxygen (3.5 g·mm·m-2·h-1). Meanwhile, the prepared QCTO composites demonstrate excellent biocompatibility and safety and are applied as coatings for strawberries and bananas as well as packaging films for mushrooms. These preservation experiments demonstrated that the prepared composites are able to effectively reduce weight loss, prevent microbial growth, maintain color, and significantly prolong the shelf life of fresh products (bananas, strawberries, and mushrooms extended shelf life by 6, 5, and 6 days, respectively). Therefore, the developed QCTO coating/packaging film shows great potential for applications in the field of food preservation and packaging.

Propolis ethanol extract functionalized chitosan/Tenebrio molitor larvae protein film for sustainable active food packaging.

The application of novel insect proteins as future food resources in the food field has attracted more and more attention. In this study, a biodegradable antibacterial food packaging material with beneficial mechanical properties was developed using Tenebrio molitor larvae protein (TMP), chitosan (CS) and propolis ethanol extract (PEE) as raw materials. PEE was uniformly dispersed in the film matrix and the composite films showed excellent homogeneity and compatibility. There are strong intermolecular hydrogen bond interactions between CS, TMP, and PEE in the films, which exhibit the structure characteristics of amorphous materials. Compared with CS/TMP film, the addition of 3 % PEE significantly enhanced the elongation at break (34.23 %), water vapor barrier property (22.94 %), thermal stability (45.84 %), surface hydrophobicity (20.25 %), and biodegradability of the composite film. The composite film has strong antioxidant and antimicrobial properties, which were enhanced with the increase of PEE content. These biodegradable films offer an eco-friendly end-of-life option when buried in soil. Composite films can effectively delay the spoilage of strawberries and extend the shelf life of strawberries. Biodegradable active packaging film developed with insect protein and chitosan can be used as a substitute for petroleum-based packaging materials, and has broad application prospects in the field of fruits preservation.

Fabrication of bio-inspired carbon nanodot-corn starch nanocomposite films via extrusion process for sustainable active food packaging applications.

In this study, carbon nanodot (CD)-corn starch (CS) nanocomposite films are fabricated for active food packaging applications. First, ginkgo biloba leaves (GBL) were used as a biomass-derived carbon precursor, and a facile hydrothermal method was employed to synthesise environmentally sustainable CDs. The GBL-derived carbon nanodots (gCDs) were then characterised and incorporated into a CS matrix via an extrusion process to fabricate the CS/gCD nanocomposite film. The effects of various gCD concentrations on the physicochemical and functional properties of CS/gCD composite films were systematically investigated. The gCD exhibited non-cytotoxic effect against human colorectal adenocarcinoma cell line (Caco-2) cells when exposed up to 1000 µg/mL. The incorporation of gCDs into the CS film improved its mechanical properties, with the toughness of the CS/gCD2% nanocomposite film exhibiting 198 % superiority compared to the CS film. In addition, the oxygen barrier and UV-blocking properties were significantly improved. Furthermore, the CS/gCD nanocomposite film significantly extended the shelf life of ω-3 oils owing to the superior antioxidant activity of the gCDs, exhibiting only 9 meq/kg during the 15-day storage period. Our results suggest that the developed CS/gCD active composite film is a promising candidate for environmentally sustainable solutions to enhance food shelf life and reduce food waste.

An intelligent myofibrillar protein film for monitoring fish freshness by recognizing differences in anthocyanin (Lycium ruthenicum)-induced color change.

A novel smart film MP/BNC/ACN for real-time monitoring of fish freshness was developed using myofibrillar protein (MP) and bacterial nanocellulose (BNC) as film raw materials and anthocyanin (Lycium ruthenicum, ACN) as an indicator. Firstly, the film containing 1 % ACN (MP/BNC/ACN1) was found to have a moderate thickness (0.44 ± 0.01 mm) and superior mechanical properties (tensile strength (TS) = 8.53 ± 0.11 MPa; elongation at break (EB) = 24.85 ± 1.38 %) by determining the physical structure. The covalent, electrostatic, and hydrogen bonding interactions between anthocyanin and the film matrix were identified and confirmed by FT-IR spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) analysis. A comprehensive evaluation concluded that MP/BNC/ACN1 exhibited excellent trimethylamine (TMA) sensitivity (total color difference (ΔE), ΔETMA0-1000 = 4.47-31.05; limit of detection (LOD), LOD = 1.03) and UV stability (ΔE96h = 4.16 ± 0.13). The performance of the films in assessing fish freshness was evaluated, principal component analysis (PCA) and hierarchical cluster analysis (HCA) revealed that MP/BNC/ACN1 (ΔE2-10d = 16.84-32.05) could clearly distinguish between fresh (0-2 d), sub-fresh (4-6 d), and spoiled (8-10 d) stages of fish, which corresponded to the film colors of red, light red, and gray-black. In conclusion, this study addresses the limitation that intelligent films cannot visually discern real-time freshness during fish storage and provides a promising approach for real-time fish freshness monitoring.

Preliminary characterization of microplastics in beef hamburgers.

The diffusion of microplastics in meat products is an emerging topic, as their impact on animal and human health is still largely unknown. The present study aimed to preliminarily determine the number and the quality of microplastics diffusion in beef hamburgers (n = 10) through Fourier-transformed infrared micro-spectroscopy in attenuated total reflectance mode analysis. Microplastics were detected in all analyzed samples. The abundance of microplastics ranged from 200.00 to 30,300.00 MP/kg. Microplastics observed in the analyzed samples were mainly characterized by irregular shapes (95.99%), grey color (70.16%), and dimensions comprised between 51 and 100 µm (57.46%). Eighteen different polymers were detected, with polycarbonate (30,300.00 MP/kg), polyethylene (1580.00 MP/kg) and polypropylene (750.00 MP/kg) being the most abundant classes. Results demonstrate an extensive diffusion of microplastics in the analyzed samples, which may be originated from various sources, including animal body, industrial processing, and packaging. Findings from this study will aid in pinpointing the source of microplastics contamination, enabling the creation of targeted guidelines to mitigate microplastics spread in processed meat food.